Muvo n200 not working

HELP! My muvo n200 player simply turned off. When I turn the power on, it begins to start of, but dies again before a song gets a chance to play. I already considered that the battery may be out but I replaced the batteries about 3 times to make sure the batteries weren't the old ones.. i also reformated & deleted & change my mp3's knowing maybe my files were corupt but the problem is still there.. Can somebody please help! tnxs...

mayar wrote:
I have the same problem, what firmware update do i need? The only one I can find on the web site seems to be for viewing Thai characters only...
That is just the fix in the latest firmware - it does verything that the earlier firmwares did as well.
I would try version .2.0 first - it is not available on the Download page but you can still get it here.
PB

Similar Messages

  • Muvo N200 not working.. any ide

    I have a Creative Muvo N200 for about a year now. Just recently it started having problems. Whenever I turn it on it shows the startup logo and then turns off immediately. I've tried deleting all the files on it and that worked for a little bit but then it went back to having this same problem. I tried putting it in recovery mode but I'm really not sure if I did this right because when I tried to download the firmware it, sometimes it said it couldn't detect the player and sometimes it said the player wasn't in recovery mode. Does anyone know of anything else I can do? Or can someone explain how exactly to put it in recovery mode? Maybe I'm doing that wrong, I don't know. Thanks for any ideas.

    The full instructions for Recovery Mode are in the sticky thread. PBMessage Edited by PeeBee on -25-200604:50 PM

  • Volume button on Muvo N200 not work

    I have a MuVo N200 Gb. A week after getting it the volume button stopped working. Rather than adjusting the volume, the mp3 player crashes and turns itself off immediately. The player can subsequently be turned on, pause/play button works and toggle switch works, in addition to music playing as normal. However, as soon as the volume buttons are pressed the mp3 player crashes again.
    Does anyone know how this can be fixed?
    I have the latest firmware update, which is "MuVo N200, FW release .".

    Thanks for the help.
    I tried the new update and it solved the problem. Someone had posted a similar problem on this site; in their case the player crashed each time the radio option was selected on the player. There must be a bug in the software that is dri'ven by some kind of event.
    The thing that concerns me the most is that when I used the "automatically check for new firmare" option on the creative site I was told I had the most up to date firmware, which clearly wasn't the case! Oh well...

  • My MuVo N200 WONT WORK!!!!HELP PLEASE!!! DESPERT LOUISIANAN IN KNEED OF AN AN

    MY MuVo N200 wont work it turns itself off after the creative logo Ccomes up. I have new batteries upbaterd the softwair filmware and reformater durt that diden't work!!!!!
    I had no AC OR power for adout a mounth I li've in Mandeville Louisians in SST. TAMMANY PARISH the MP3 PLAYER MoVo N200 stayed in the heat for about a mounth with no power or ac in the housre because katrina knocked thepower out could my MuVo N200 52 MB not take the heat of the day that it just stoped working and got so to speaked fried in the heat!
    I would like to get my MuVo N200 52 MB fixed soon and some ancers on why it wont work when i reformated it , did the latest film ware, and the latest software up dates. this is comming from a desperat louisianian and LSU FAN PLEASE HELP ME AND AS soon as possible please!!!!!!!!!!!!!!!!
    Thanks
    Mistery_Girl

    Have you tried reloading the firmware? Make sure to follow the instructions at the download page.

  • Muvo n200-not find by

    hello
    I got a big problem with my muvo N200. When I connect it through usb to pc it's not recognized.the picture which shows that player is connected to pc is not appearing. I can't upgrade the firmware and do anything with usb. I tried this on other pc's and different usb cables....where's the problem?

    Try this:?http://forums.creative.com/creativel...ssage.id=23264?Read posts 3 and 4. Several N200 owners have gotten satisfaction from this, e.g.,?http://forums.creative.com/creativel...d=00348#M62247?I occasionally come back here to check on N200 failures, because Creative just won't put this in their FAQ, I guess they feel they have to see it work for themselves. Even the uber-posters won't acknowledge this fix discovered by AB84. Hope it works for you, as it has for several of us.

  • Muvo N200 not recognized by MediaSou

    I have a Muvo N200. I downloaded the latest media source software. At first it would not install because it could not find a creative player attached (even though it was). After much troubleshooting I discovered that the creative install program did not play nice if I had other USB devices attached (I have an external hard disk, external DVD burner and a card reader). Once I turned all the other USB devices off then it installed fine. However now that MediaSource is installed it tells me that I have no creative player attached. The player shows up as dri've F in windows and I can read and write to it fine. It also shows up in my old MediaSource software (shows up as Muvo). I have not updated the firmware for this player as I am some reluctant to take the risk that the player will stop working. I see lots of people have problems with firmware upgrades.
    Is there something I can do to get MediaSource to see my Muvo N200 player?Any help would be appreciated.

    I got my problem fixed. It turns out I also needed the appropriate plugin as well. I sort of assumed it would be all one package but trolling through the forum I found reference to their being different plugins depending on what unit you have. Installing the right plug in fixed the issue.

  • Care button and finger print reader for 3000 N200 not working

    I have bought Lenovo 3000 N200 model. THe Care button and finger print reader not working. I have loaded the hot key driver as well as finger print reader driver. I have XP OS on my notebook. The software for finger print reader for XP (64 bit) which is there in the lenovo site is not getting loaded.
    Kinldly help.

    Hi @Sean-Ireland
    Welcome to the HP Support Forums! I saw your post regarding the problems with your fingerprint reader not working. I will be happy to help you with this. Start by installing both your Validity Fingerprint Sensor Driver and the Digital Persona Fingerprint Reader Software. Let me know how it goes.
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • N200 Not Working? Get new Firmw

    I did not see this posted anywhere else, so thought I would put this up for the benefit of anyone else having problems with their N200.
    My N200 was shutting down every 30 seconds - 5 minutes. It was working fine for several weeks, then just seemed to die. Tried many batteries, but this happened with brand new Duracell. I think most (all?) of the cut-offs were related to playing Audible books. Anyway, I was ready to RMA the thing or throw it out the window, but I decided to try the new firmware v.2. Surprisingly, it seems to have completely fixed the problem. I did not do the reformat, though that might be a good idea too.
    JeffMessage Edited by jsnorman on 03-23-2005 07:0 AM

    Thanks found it and all is good now
    Sent from my Sony Xperia™ smartphone on the Telstra™ Mobile network
    gener7 wrote -
    >     
    >my iMac is not working ,bought new iMac how do i get my Photoshop and Light room back
    >created by gener7 in Photoshop General Discussion - View the full discussion
    >You would first go to the Adobe account where you registered or bought your products.
    > 
    >https://www.adobe.com/account/my-products-services.html
    > 
    >Your software is listed under My Products. Click the little triangle to find your serial number.
    > 
    >Gene
    >     
    >If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7010785#7010785 and clicking ‘Correct’ below the answer
    >     
    >Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    >Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7010785#7010785
    >     
    >To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"      
    >     
    >Start a new discussion in Photoshop General Discussion by email or at Adobe Community
    >For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
    >                                                
    >

  • MuVo N200 wont play please help !

    Two days ago my player was working just fine, but as of yester day it wasn't.
    as i turn it on, the creative screen comes on then it seems to freeze on the MuVo N200 screen with no Music at all !
    I have taken out the battery more times than i care to count but it still wont work. I haven't droped it or damaged it in any kind if way so why wont it work.

    From the FAQ post:
    <IMG height= alt="" src="http://forums.americas.creative.com/i/p.gif" width= border=0>
    My MuVo is not working properly, what can I do?
    The first thing to try with a misbehaving MuVo is to update the firmware. Get the latest version from Nomadworld.com downloads and make sure to follow the instructions exactly that are accessed from <EM>show details </EM>at the download page.

  • Sound not working on 3000 n200 windows 7 ultimate 64 bit

    Hi
    MY Sound is not working on 3000 n200, I have  windows 7 ultimate 64 bit installed newly, and have all drivers downloaded.
    Strange thing is the sound works for windows and for soundcard test applications, yet wont work for media player, vlc, or anything on the internet like youtube or music sites.
    Getting realy annoying at this stage as Ive tried many things, all to no avail.
    It doesnt specify what soundcard, it just said: " High definition audio"
    Any help Please.  Maybe its another driver I need for windows 7 compatibility.
    Any additional details you require, I will suply ASAP 
    Thanks
    Darran

    I encountered a similar issue on my 3000 Y410 laptop that I just upgraded to Windows 7 64-bit.  I ended up downloading the drivers from the RealTek site directly.  Go to the RealTek downloads page (RealTek Downloads) and click on the "High Definition Audio Codecs (Software)" link.  You'll get to (after a page with a checkbox for an agreement) page for "Software: Drivers and Utilities" --- download the "Vista, Windows7 Driver(32/64 bits) Driver only (Executable file)" and run that, then try your sound again (may require a reboot).
    Hope this helps...

  • Mp3 wont play but radio works Muvo N200 51

    My Creative MuVo Micro N200 52MB worked fine for /2 a year and then all of a sudden, only radio works and mp3's work some of thge time. This is also the same playlist that worked fine about 2 weeks ago. I downloaded new firmnware and drivers and I still have the problem. Anyone come across this before or know of what it could be? Its kinda baffling. I loved the player before this happened. Now it is just a tiny FM-only radio for me. Thanks.

    Could it possibly be Copy Protection on the Mp3 file itself thats preventing the player from playing the music?
    My V200 (Its just like the N200 except its designed like the MuVo TX FM with the removeable battery pack) Has never been able to play Copy protected Mp3's or Wma's... ever, Even though the firmware updates claim to allow it to play those types of files...
    Are you using music that you downloaded from one of the many online stores that copy protect their music?
    Try ripping a CD to the hard dri've and then transfer it to the player and try that out...

  • NOMAD MuVo not working after formating with Wind

    Hi,
    Yesterday, I formated my NOMAD MuVo player with windows (FAT32) and now it only works as a USB key. When I press on the play button the light turns to red and there's no sound.
    I have neither the firware nor the drivers and when I try to install the firware it does not work (the software can't find the player that is plugged into the USB port).
    Could someone please help me?
    Thanks.

    Have you followed the instructions on reloading the firmware at the download page? Often for MuVos there is a special procedure to follow (click "show details" next to the firmware download link).
    Formatting as FAT32 can be a bad idea as some players don't recognise the file system.

  • When comes N200 power manager driver for 7? Hotkeys not working without it.

    Hello,
    Will be there release for power manager driver for Windows 7?
    I did install all drivers, could find under download for 7 and infact, without power manager driver hotkeys (sleep, hibernate) on N200 do not work.
    Solved it with installing Vista power manager driver with compatibility mode and bingo, all keys started work and I'm able to sleep/hibernate my laptop.
    Why isn't there driver for 7 if without it things do not fully function?

    try these : 32 bit - 64 bit or try smart downloading

  • HP Pavilion 14z-n200 Touchsmart CTO Notebook touchscreen not working after update

    More than a month ago I updated my HP Pavilion 14z-n200 Touchsmart CTO Notebook and after the required restart I noticed that the touchscreen had stopped responding. I have searched the forums and found that other members of the HP Pavilion Touchsmart family had the same issues, but their solutions have not solved the problem with my specific PC. Any help would be great! Thanks

    Hi @Cbird22 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 14z-n200 TouchSmart CTO Notebook  and the Touchscreen not working correctly. If you follow this document it will show you how to correct this issue.
    You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
    When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
    Hope this helps.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Creative MuVo 64 MB is NOT Work

    Hi,
    I have the Creative MuVo 64 MB which is not working since 3 months. The problem is when I power on the Player, the Red Light glows but then I am not able to play the player.
    Please help me in sorting out the problem.

    Mac Spinning Wheel https://forums.adobe.com/message/5470608
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

Maybe you are looking for