Muvo n200 recognize probl

i have muvo n200 256mb. i try it on friends comp, it wasnt recognized first,but in other usb port worked fine...
when i came home my computer didnt recognized it.. in every usb port.. it says
`one of the USB devices attached on copmuter has malfunctioned and windows does not recognize it `
i even try on 3 computers with win xp and got same message and when try to open recovery mode again same message.
there is no problem with listening music
firmware is .6.02,

Try this:
Disconnect the player and then open Device Manager.
Select View Devices by Connection and Show Hidden Devices.
Under your USB connection find all entries for your player including ones for Player Recovery Device and remove them all.
Close Device Manager, restart PC?and then connect your player.
Try this and let us know what happens.
PB

Similar Messages

Muvo N200 BIG PROBL

Hello, I have this mp3 player almost 2 years, i had some problems wih him in the past, but none of them was so big as this. I was trying to reload newest firmware .20.04, everything seems to work properly, i did it step by step as they adviced on Creative pages, but after finishing reloading the firmware, i shut down?updating application and since then does the mp3 player no response. I can't turn it on, Pc don?t recognize him. So if anyone knows what to do (beyond throwing it into the basket), i?ll be very glad for any advice. Thanks a lot. Del

Although SSR's post is for another model, [url="http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=80937#M80937">thes e steps may help[/url]:
SSR wrote:
Make sure to click on the "show details" link at the download page which explains how to apply it:
Press and hold the Play button while connecting your player to your computer's USB port.
<
Continue to hold the Play button for 0 seconds after connecting your player to your computer.
<
Release the Play button when the Find New Hardware dialog box appears on the screen.
<
Follow the instructions on the screen to install recovery drivers for your player.
<
Download the MuVoTXFM_PCFW__7_04.exe file into your local hard disk.
<
Double-click the firmware upgrade file and follow the instructions on the screen.<
Substitute the correct firmware version for your model and give it a try. It worked for my MuVo TX FM.
Best of luck!

Muvo n200 1gb probl

I have a new, less than two week old, Muvo 200n gb player that just started giving me problems today.
I was running with it this morning and it just died halfway through my run. I assumed that the battery had run out so I put a new one in when I got home. That wasn't the problem as it powers up and then shuts down after about 3 seconds.
So far I have tried reformatting it- which didn't work.
I put one folder's worth of music back on and it still shuts down as soon as it powers up. The funny thing is that if I hook it up to my computer I can access those music files and play them back. If try to play the music through my player it just goes right to it's auto shut-down mode and doesn't even give me the chance to access any other parts of the player- like the radio.
Any suggestions?
Jon

I am having the same problem with my player. It started the second day I had it. I seem to be able to get it working by reinstalling the firmware each time. When it stops working it will turn on temporarily and then shut down. I can access it as a removable dri've but it will not run under it's own power. After I reinstall the firmware it runs for a few hours and then the problem starts all over again. This is a serious problem for me as I intend to use this on a three week vacation traveling without a computer to reinstall the firmware each day. I had hoped there would be a solution on Creative's website but all I've seen mentioned about this problem is in these forums with no reply from Creative. Come on Creative..what's the deal?

Muvo n200 microphone and echo probl

hi, can anyone help me to slove my muvo n200 problem? My mp3 player is in .0.2 version, I bought it for 5 months till now, the microphone recording function suddenly don't work and whenever I press it it shut down the whole system.
The second problem is just started the day before yesterday. The sound (not because of the headphone) was not right. It sound metalic and have heavy metal econ. However it only happen when I start up it for the first time in a day. After that it will be fine. I really don't know why. Should I recovery the whole system? Or I have to download something to replace it's
Thank you very much.

Tried reloading/updating the firmware?

MuVo N200 File Transfer Probl

So, I just got a new MuVo N200. After installing the MuVo Drivers, I tried to drag and drop .mp3 files to the dri've in Windows Explorer. After a couple of files transfer, the transfer hangs, and then a windows error pops up from the system tray saying that a USB device has become unresponsi've/unrecognizable, and click here to troubleshoot (which is of course worthless). The MuVo is now locked up at this point, and removing the battery is the only way to get it out of 'USB mode'. I have tried wiping everything Creative from my computer and reinstalling the software (short of running regedit and deleting all creative regkeys), I have flashed to the newest firmware .2.0, both with and without the 'Format Data Area' option, I have also formatted the MuVo as FAT32 through windows explorer, however this problem still persists. I'm going to finally upgrade my computer to WinXP SP2 (only have SP now), but I don't think this will solve my problem, as it seems to be the MuVo that is at fault (all my other USB devices, including other mp3 players work fine). Does anyone have any ideas as to other fixes I might try, or am I looking at an RMA?
Also, I purchased this through amazon.com, so I'm assuming I need to handle this as an RMA through creative, not through a return process with amazon.com, correct?Message Edited by SLOROJO on 06-3-2005 0:6 PM

I have been through some USB woes' (as SSR is aware) and don't dispair yet. What does worry me is that other MP3 players work. Make sure that is the case even after your last set of changes. Drag an equivlant amount of files to the other MP3 players. Be equal in your testing. I was able to drag a 20K file to my N200 .. but a 2MB file would get hosed.
Having said that, for me, the N200 works without instaling any of the drivers or Media explorer. I agree, go to another W2k or XP machine, plug it in and drag about 00MB of files to the N200 when it shows up on the explorer. If that works fine, then there are many ways to clean up your USB stack. Not sure if it's a USB2 issue .. and SSR has dealt with that.
I had a situation where another USB driver was interfereing with my USB phone sync program. Cleaned up all USB device drivers, and it worked fine. With W2k SP4 or XP2, have not had too many issues.

Muvo n200 HEL

my n200 wont turn on anymore i updated the firmware because i kept getting the error when i turned it on. but now it wont turn on anymore and when i plug it in my computer doesnt even recognise it. i've looked at other threads with the same problem and i've done everything that it says to do but still doesnt work.

I was having the same problem as C-rad after following instructions from a customer support email to update the firmware. I apparently had missed the part in the instructions to "Make sure that format data Area is selected".
Next my MuVo N200 wouldnt turn on. I finally got it to go in Recovery Mode.... Something happened like the computer restarted or shut down or something...and now my computer wont even recognize the player in recovery mode. I deleted the original creative thigns and reinstalled it....and it still doesnt recognize anything.
When I go to Device Manager and Hidden Devices when it is plugged in, I cant find anything that I would think is the player?
What do I do next? I would really appreciate any help I could get.
Andrea

MuVo N200 Direct Trans

Hi, I have an old(er) MuVo N200 256mb mp3 player and my friend has a video ipod. He is having a problem downloading a particular album that he wants that I have on my player, so he's asked if it's possible to directly transfer. I suggested e-mailing it but he seems to think that'd take longer if it can be done directly. I know the N200 has this fancy cord for encoding as well as the USB port, so is it possible to do this transfer simply by connecting our players together? And if so would we use the encoding cord or the usb cord? If I had to guess I'm betting either this can't be done or I would connect it to his using the USB which would cause his ipod to recognize it as a portable dri've, make sense? If anyone could get back to me ASAP that'd be wonderful, thanks -Ang-

Ang,
You're right, this cannot work. You need to attach both player to the computer to make those transfer.
Jason

Muvo N200, 1GB installation prob

I made the mistake of connecting the Muvo to my computer before
installing the software. Not a good idea. Even after installing
the software the device manager keeps on indentifying the Muvo
as an "Unknown device". I then tried installing it on my wife's
computer in the proper order and the Muvo was recognized properly.
But I want to install it on my computer. Unfortunately all my
system restore points were overwritten by my many install attempts,
so now I am sunk. I've got to figure out how to fix the damage
manually. Even removing the device using the device manager,
uninstalling the software, reinstalling in the proper order,
and finally connecting the MP3 player doesn't work. When I plug
in the MP3 player itstill recognizes it only as an unknwown
device.

> Jason-CL wrote: There's no need to install driver if you're
> using Windows XP.
It did work on other computers, so as you pointed out, it was
clear the problem was not with the Muvo N200. I tried updating
the BIOS and all the MotherBoard related drivers. Then I removed
all USB stuff via the Device Manager and let XP put it all back.
... Plugged the muvo back in ...
Drat. It just says "Unknown Device" and does not show another
disk dri've.
> and you could try creating another user account ...
Tried that too. Same problem
> Try using other available USB port ...
The four main USB ports on the MBD back panel were all
in use so I had been using one of the four USB ports on
a PCI add-in card I installed to give me more ports.
I tried switching to the USB ports on the front of the
computer (which are cabled to an aux USB connector on
the motherboard). Same deal - unknown device. (This is
getting old).
Finally I tried unplugging my digital camera base unit
from on the the four main USB ports on the MBD back panel
and I plugged my Muvo N200 into that. Instant Recognition!!!
A new disk dri've appears, and it even knows that it is a
Create Muvo. So then I plugged my digital camera base unit
into the USB add-in card and it works just fine too. (It
also shows up as a disk dri've).
So now all is well except for my fragile understanding.
Here I thought all USB ports were created equal (well except
for the ver verses ver 2 thing). But clearly on my computer
they are not. Perhaps there is someting wrong with my MBD
or its setup that causes this.
Anyway, thanks for all your suggestions, especially since
I don't think I would have figured it out on my own.
~Paul

All MuVo n200 users should read this!!! really wo

Hi i?m pepe, and few days ago i wrote for help, i was having problems with my muvo n200 when i wanted to listen mp3 file it played then with a scratch sound in the background.
Finally after reading, and reading, and more reading found this advise from a genius person who must work for creative, and i really mean it cause the gays from "support" treat my problem as a child?s stuff, "is the battery working" "is your player pluged correctly" dammn it.
So every one having problems with MuVo N200 shoud go to this page.
http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=23264
I?m going to copy and paste it so you can read.
Hi. After I dont know how many hours I finally got mine to work. I hope this helps you, although I am not sure if it will. I am not exactly sure why it worked, or how ( maybe just a whole lotta hoping!)
Anyway....So I did a bunch of stuff a billion times. But here Is what I did most Recently to get it to work: ) Delete any old Creative files related to your player. 2) Reinstall the CD 3) Download Firmware upgrade .20.04 to your Desktop. 4) Download Mass Storage Driver .07.00.250 to your desktop. 5) Try to put it into recovery mode like you have probably done before by taking out the batter and holding play while you plug it in. 6) Instead of waiting for a "find new hardware" dialog box, i double clicked to open the new firmware file I had downloaded. This searched for my player and found it. 7) A box will pop up to upgrade your firmware. MAKE SURE TO SELECT THAT BOX THAT SAYS "FORMAT DATA AREA" before your start. ( I think this is where all my problems came from.) This worked for me and that was all I had to do. I didnt actually do anything with the Storage Driver download except put it on my desktop before i plugged my player.
After multiple correspondences with some not-so-bright support people, they did say if the recover mode wouldnt go or i couldnt get anything to work that I would have to send it back in for "Return Merchandise Authroization." If your contacting them, dont hold your breath too long....it takes a very long time for a response.
Hope this helps you!
AB
Thank AB84, thank you very much
Cya around

Yeah, I don't know why he didn't link to the original thread, where you can see all of AB84's posts and another post (from me) that gives an alternati've for reinstalling the CD. Here's the link:
http://forums.creative.com/creativel...ssage.id=23264
He's right, though, to advertise to N200 owners with a shouting title (we should bump this occasionally), as Creative just won't put this in their instructions, yet there seem to be plenty of us N200 users that get stuck where our computer can't recognize it in recovery mode.

Muvo n200-not find by

hello
I got a big problem with my muvo N200. When I connect it through usb to pc it's not recognized.the picture which shows that player is connected to pc is not appearing. I can't upgrade the firmware and do anything with usb. I tried this on other pc's and different usb cables....where's the problem?

Try this:?http://forums.creative.com/creativel...ssage.id=23264?Read posts 3 and 4. Several N200 owners have gotten satisfaction from this, e.g.,?http://forums.creative.com/creativel...d=00348#M62247?I occasionally come back here to check on N200 failures, because Creative just won't put this in their FAQ, I guess they feel they have to see it work for themselves. Even the uber-posters won't acknowledge this fix discovered by AB84. Hope it works for you, as it has for several of us.

MuVo N200 Screen Too Small To Re

Hi,
I just bought the MuVo N200 (52MB using Win XPHome) and trying to figure it out. Now that I got the software up (w latest the firmware installed), I'm challenged by the tiny screen area.
Dunno if I'll rue this purchase therefore!
Getting out by sunlight or holding it under a bright light helps (The backlight goes off before I've begun to make things out). A magnifying glass helps a bit too.
How have others of you managed with this (I can't be the only one!)
Thanks
Chet

I would like a larger display, although that would probably mean that player needs to be larger. That would be okay though, since I also want the player to use a AA battery and have an AM and FM tuner. Having models with 52 meg, gig, and 2 gigs to start(with higher capacity models coming later as flash memory prices drop). I would also like to see a deluxe model with a much higher quality mic(so students can adequately record lectures given in large lecture halls, or businessmen could record meetings) and a high quality line in(then the mic and line in could be omitted on the standard model).

Muvo N200 doesn´t play mp3 correct

Hi, im Pwpw, i have a MUVO n200 52mb
i have it since 4 month ago, and 2 monts ago it didn?t play mp3 correctly, the was a scratch sound while playing it, so i didn?t know what to do and i change the whole stuff.
Now the same problem, today i loaded some mp3 and the same problem, i dont know what to do, it only play correctly files loaded as wma, but i want to play my mp3 files, please tell me what to do, is this a firmware problem? what can i do? im new into this.
Send me your wise advise
Thank you

Yes. Reload the firmware.

I really need help with my creative MuVo N200 mp3 pla

i got my MuVo N200 mp3 player for chirtmas of last year, and it stopped working in 3 months. it used to shut off every few minutes and the mic doesnt work any more and i cant record music from the radio. right now it doesnt even work for a minute, it shuts off as soon as i try and turn it on. i emailed creative when it first started happening and they sent me a email saying what to do on there website, something about downloading something. i tryed it and it didnt work, im not sure if i didnt do it right. And right now i have no idea what to do. and creative won't help me unless i pay them money to fix it for me which im not about to do. has anyone have the same problem with the MuVo N200 mp3 player? what am i suppose to do to fix it's I still have there email telling me what to do, but i just dont get how to do it and if it will work. It only worked for me 3 months, and now im mad and thinking about buying a new one thats not from creative but i really want to try fixing it again to see if it will work. please help me.

Good question, unfortunately I have absolutely no idea. Reflashing/-formatting generally takes care of the usual cases of wonkyness this player develops, and there isn't anything more drastic you as a user could do.
Do you have a directory named "Recorded Tracks" on your player? Should be created automatically, but if it isn't you could try creating it manually...

PLEASE HELP MUVO N200 ERROR EVERY TIME I TRY AND DOWNLOAD A SONG

hi every time i try and download a song it says error. i put it into recovery mode and it fixes it but i have to unload all the songs off and then start again but the same thing happens again and sometimes i don't even know if my player goes into recovery mode because my computer doesn't detect it. is there anything i can do about the error every time i try an ddownload a song? please help i am relly frustrated!!

"Download" as in from LimeWire or some such program? Or loading your player with songs.
If it's from LimeWire, the song file is probably corrupted.
If it's loading your player with songs, either you haven't installed the player's corresponding driver correctly, or something's happened to corrupt your firmware.
Try downloading the firmware from Creative and re-loading it onto your player. Very easy to do.
If that doesn't fix anything, try uninstalling and then re-installing the Creative MuVo N200 driver onto your computer. Get somebody that <EM>really</EM> knows what they're doing to help you.

Muvo N200 FM Radio - no stereo so

I have a Muvo N200 52GB with latest firmware (.2.0).
The only problem I have with it is that the FM Radio sound output is mono even if the display indicates stereo reception.
I can achieve stereo sound if I pull out the headphone jack a little way but the connection is not secure if I do this and I don't have to do this to listen to WMA/MP3 music.
This could be down to firmware but I have only seen one other post with this problem.
I will try to reflash just in case but would appreciate any other suggestions.
In my opinion, even if FM reception is mono, sound output should still be directed to both right and left channels and not just one (left channel in my case).
Quozzbat

quozzbat wrote:
I have a Muvo N200 52GB with latest firmware (.2.0). The only problem I have with it is that the FM Radio sound output is mono even if the display indicates stereo reception. I can achieve stereo sound if I pull out the headphone jack a little way but the connection is not secure if I do this and I don't have to do this to listen to WMA/MP3 music. This could be down to firmware but I have only seen one other post with this problem. I will try to reflash just in case but would appreciate any other suggestions. In my opinion, even if FM reception is mono, sound output should still be directed to both right and left channels and not just one (left channel in my case). Quozzbat
Obviously the player is faulty as even if it's in mono you will get output from both channel. You can try reinstalling the firmware on the player and see if that helps just in case. If not, you should return to creative and get it repair.

Muvo n200 recognize probl

Similar Messages

Maybe you are looking for