Muvo NX prob

I am having a bit of a problem with my Muvo NX. It's been working great for about 6 months now, but yesterday when I was moving some files onto it, it stopped mid-transfer. I tried to restart the transfer but it froze again. I tried to delete the files in question and it froze again. I reformatted the player, tried with some other files, but came up with the same result. It seems to fill up at about ~30MB (its a 256MB unit). It seems to have no problem accessing the files in the first half of memory. Any recommendations are appreciated.
Thanks,
Matt

() Stated MB capacities are always approximate, especially because of the differing uses of powers (some say ,024, others says ,000) as well as formatting, storage for player-related files, and other issues.
(2) You may also have filled your root directory (about 30 files); sometimes the error message when this happens is along the lines of "disk full". Create some directories and move your files into them.
(3) And the ".trash" folder probably was trash.

Similar Messages

Muvo TX Prob

I received a Creative Muvo TX for Christmas as a present. I enjoyed using it, but nearly immediately, I experienced problems.
What has been occurring is whenever I use my player, eventually, after an indeterminate amount of time, the player will freeze in the middle of playback and will emit a buzzing noise into the headphones. At that point I cannot turn the player off or adjust anything. It leaves me no options but to remove the unit from the battery pack and wait a while, then try again. Sometimes, it will not even progress past the opening Creative logo at all. Thinking it may be something to do with a corrupt file or something similar, I formatted completely the memory and started anew, using only one song as a test. That song froze as well. I also checked to upload new firmware, but I already had the latest version installed.
Thinking I may have overlooked the simplest solution, I installed a new battery and it appeared to help, but less than a half hour into playback, I was experiencing the same problem again: the player froze and emitted this buzzing/static sound into the headphones.
This is utterly frustrating and I await any help I can get on the situation. Thank you in advance.

I don't have the same problem as you, but something a little similar. My Muvo TX will freeze once or twice about 30 minutes after putting in a new battery. Once I get past these, the device works fine again until I put in a new battery. Before it freezes, I will hear a little static. It might be interesting to try your Muvo with a battery that doesn't have a full charge and see if it does any better.

Muvo N200 prob

I have a muvo n200 which for the past few days has turned itself off when ever i tried to increase up the volume. I tried to resintall the latest firmware upgrade but now my player has stopped working. When I turn on the player all i get is dots on the lcd screen with the backlight on. I tried to reinstall the firmware again and the firmware cant find the player connected to the computer, although windows explorer detects the device. Please can you help. Thanks in advance.
Model muvo n200 GB
Computer dell optiplex gx270
windows 2000 service pack 4

If it's recognised on the PC, try formatting it first and then try updating the firmware again. If you can try the player on another PC, try updating the firmware there to see if it works.
Otherwise it would be best to contact Customer Support for assistance, the player could be faulty.
Cat

MuVo Noise Prob

I got my MuVo GB about 6 weeks ago. It was fine until yesterday when it started making a weird whirring noise on the mp3 tracks. I have changed batteries a few times and changed headphones, so that is not the problem. It sometimes happens that I play a song and the sound is there, then I play it again and it is gone, but 80% of the time there is this awful electronic loud background noise that drowns out the music almost. The noise is in synch with the music being played. Is it a reading problem with the player? If I hook the player to my PC and use the PC to play the track from the MuVo memory there is no problem. Any thoughts on this? I figure I will have to return this player to the shop/Creative for a replacement. How long is the guarantee for anyway? Thanks for any suggestions.
Stephen.

I formatted the flash dri've on the MuVo N200 and it made no difference to the noise problem. Then I looked on the Creative site and found reference to a "distortion" noise in the frequent problems section. I updated the firmware and this seems to have solved the problem.

MuVo transfer prob

I tried to transfer 8 songs onto my MuVo - 4 from CD's and 4 protected downloads from MSN Music using WMP. When I check the MuVo dri've in Windows Explorer, all 8 songs are present. When I disconnect the player to listen, only the 4 songs from CD's are on the player. Can anyone help?
Thanks!

jb207,
In addition to Mattan advice, you will also need to transfer WMA DRM protected files through either Mediasource or Windows Media Player to the player. Only such application allow the license to properly transfer over to the player.
Jason

MuVo storage prob

I have a fairly new (3 months) MuVo n200 (gb) MP3. I have about 553mb of data on this, but I cannot put more on. I get an error message when I try. If I remove a song, I can then put another one on in its place. Anyone have any suggestions?

LewisH,
The players come from the factory using a FAT file system. This allows it to work in 99% of all operating systems, but also gives us the problems of older file systems.
FAT only allows a small number of files in the root directory. About 30 I believe.
There are two choice, put everything in subfolders.
or
Reformat the device using FAT32.
Daniel

MuVo Slim Prob

I have a serious problem with my MuVo Slim. When I turn it on it plays perfectly but when I try to turn the volume up or down it just shut's down. Sometimes I have this problem but there are times when it plays in the normal way. Could someome tell me what is going on and what I have to do to fix this problem?
Sophie

Reload the firmware. If you don't know how to do that, search the forum for information.

Muvo 4GB prob

I recently found my Muvo2 4GB and have lost the manual. I see here from the site how to play a song(s), but after I navigate to "music" on the muvo, and press play, nothing happens. There is music on the muvo that shows.

I believe I put them on when I got the thing. (using the software, which I cannot find since it's on a now dead HD) The songs show on the LCD, and when I plug it into my pc it shows as a MUVO, and the folder shows A lot of songs, I simply can't get anything to play when I push the play button.

MuVo V100 Prob

Hello,?I have had the Creative MuVo V00 for quite a few months now. Up till very recently, I have been having no problems with it until now.
I added some new songs to?a folder?and when I play the folder on the Mp3?it skips?the songs completely and I am not able to find them!?However, it'sworks perfectly fine on the computer. At first I put?them in a folder?(which already had songs in it before)?under 'Root' and then?I moved all of them under 'Library B'. It still skips the same songs in both folders when I try playing it. Another problem is that sometimes, the order of the folders under 'Root' change. If anyone has solutions to these problems, I would be very grateful!

I don't think that the MuVo series can address sub folders [folders within other folders].
I save albums in separate folders on my computer and then drag an entire album folder to my MuVo, so I'll usually have 6 or more folders at a time in my 52 Mb MuVo.
You could do it as playlists too- a group of songs in each folder, but I don't think that the MuVo can access a folder inside another folder, because of file structure limitations.

MuVo T100 Prob

I have strange problem with my mp3 player. When I bought it, it was all ok, I uploaded songs etc. But now mp3 player is just recharging but computer don't recognize it, I can't upload new songs. I don't why :/ Any sugestions ?

Hi?I have an N200 as well and this sort of random switch off is normally fixed by a firmware reload. Look at the link in my signature line to the different versions of N200 firmware - the best thing to do is to reload the same version as you already have. If your version isn't listed or the links don't work then post back and I will find you a copy. PB

Muvo player prob

I have the plain 28MB player with no screen. well one day it froze, wouldnt play at all. i put in a new battery, still didnt work. And nothing till detect it,computer, xbox nothing. when i try to open it in my PC i get this message.
"H:\ is not accessible
The request could not be performed because of an I/O device error" i dont know what that means.

The manual says that a flashing red light is a battery problem. Have you checked your battery contacts and cleaned them up? How is the player when you connect it to your PC?
You could try a firmware update - there was a new version on the UK site in July of this year. It needs Recovery Mode so make sure you follow the instructions to the letter. You also need to d/l and install the Mass Storage Driver at the top of the page first.
PB

Micro muvo n200 prob

i have had ny n200 about 6 weeks and everything seemed fine until about a week ago when it would just shut-off all of a sudden.
it seems to turn off when it switches from one song to the next.
sometimes it plays song and shuts down other times 5-5 before it shuts down.
any idea what is wrong?

tneffy:
Unusual problems like this on the N200 can almost always be cured by re-loading the firmware. Download the latest version from
http://www.nomadworld.com/downloads/...uVo Micro N200
Make sure you follow the instructions exactly on that page.
PB

MuVo TX SE 1GB formatting prob

I've been reading a lot of questions and answers, but I still couldn't find my question, so I post it here... I have a problem with my MP3 Player. I have a <I>MuVo TX SE</I> from <I>Creative</I>. (GB) I can not format my MP3 Player anymore. I can start up the progres, but afterwards it gives a system error or nothing on my computer works anymore. When I plug it out, the computer is functioning normal again. I also tried to format my MP3 Player with the program that goes with this MP3 Player. But again, the same problem. When I want to add music to my MP3 Player, I get the message I have to format it first. Eventhough I have an empty screen when I look at the file list. I hope someone can help me.... And that I made the problem clear for the one that can perhaps solve it. Thank you!

I dont really understand what you mean. I'm not a real expert in these kind of things.Also my MediaSource Organizer isn't working properly. It gives a messages that my PC Music Library is corrupted. And I didn't even have used it yet. I feel the problem lies with my MP3 Player. That something it damaged in it.. I wonder if there a more people with this problem. I've had this MP3 Player for about a year now. And now it's having problems.Kind of a bummer actually...

MuVo TX FM memory prob

HELP! I just bought a Muvo 52mb TX FM. I converted my mp3's to WMA format to reduce the size so it can play more songs. When I tried to load 480mb worth of WMA music I was only able to move 228mb worth. Properties show I still have 267mb of free space but I get an error when adding even more file. Since then I loaded the lastest firmware and still no luck. Any suggestions?

Hi, Did you just transfer them straight in as files, not in folders or anything? - if it works in the same way as my Muvo N200, (from the product specs I think it does) there's a limit to how many files you put in the root directory like that. You have to put them in folders first and then transfer the folders onto the player as if they were files. This can either be done just by copy and paste of folders into your 'muvo tx fm media explorer' directory in 'my computer' (just like the media explorer window was for a floppy disc), or folders can be created in media source. There's a step by step explanation of how to do this (with pictures) here.
Folders are really useful for organization too, as you call name them things like 'rock' or 'classical' etc. and then sort your tracks, or give them album names!
Of course if you've already done this, or your muvo works differently to mine, this will be no use to you, but just in case...
Message Edited by flaneur on 03-3-2005 09:35 AM

Muvo tx fm driver prob

everytime i connect my muvo tx fm to my computer, i always have to install the driver because my computer does not recognize my unit. do i need to update my driver so that i will install it once?

We've seen from some Nano Plus users that the latest version on new players has FM Recording back on again so we'll just have to wait for Creative to post a later version to the website. PB

Muvo NX prob

Similar Messages

Maybe you are looking for