MuVo storage prob

I have a fairly new (3 months) MuVo n200 (gb) MP3. I have about 553mb of data on this, but I cannot put more on. I get an error message when I try. If I remove a song, I can then put another one on in its place. Anyone have any suggestions?

LewisH,
The players come from the factory using a FAT file system. This allows it to work in 99% of all operating systems, but also gives us the problems of older file systems.
FAT only allows a small number of files in the root directory. About 30 I believe.
There are two choice, put everything in subfolders.
or
Reformat the device using FAT32.
Daniel

Similar Messages

Muvo NX prob

I am having a bit of a problem with my Muvo NX. It's been working great for about 6 months now, but yesterday when I was moving some files onto it, it stopped mid-transfer. I tried to restart the transfer but it froze again. I tried to delete the files in question and it froze again. I reformatted the player, tried with some other files, but came up with the same result. It seems to fill up at about ~30MB (its a 256MB unit). It seems to have no problem accessing the files in the first half of memory. Any recommendations are appreciated.
Thanks,
Matt

() Stated MB capacities are always approximate, especially because of the differing uses of powers (some say ,024, others says ,000) as well as formatting, storage for player-related files, and other issues.
(2) You may also have filled your root directory (about 30 files); sometimes the error message when this happens is along the lines of "disk full". Create some directories and move your files into them.
(3) And the ".trash" folder probably was trash.

Muvo TX Prob

I received a Creative Muvo TX for Christmas as a present. I enjoyed using it, but nearly immediately, I experienced problems.
What has been occurring is whenever I use my player, eventually, after an indeterminate amount of time, the player will freeze in the middle of playback and will emit a buzzing noise into the headphones. At that point I cannot turn the player off or adjust anything. It leaves me no options but to remove the unit from the battery pack and wait a while, then try again. Sometimes, it will not even progress past the opening Creative logo at all. Thinking it may be something to do with a corrupt file or something similar, I formatted completely the memory and started anew, using only one song as a test. That song froze as well. I also checked to upload new firmware, but I already had the latest version installed.
Thinking I may have overlooked the simplest solution, I installed a new battery and it appeared to help, but less than a half hour into playback, I was experiencing the same problem again: the player froze and emitted this buzzing/static sound into the headphones.
This is utterly frustrating and I await any help I can get on the situation. Thank you in advance.

I don't have the same problem as you, but something a little similar. My Muvo TX will freeze once or twice about 30 minutes after putting in a new battery. Once I get past these, the device works fine again until I put in a new battery. Before it freezes, I will hear a little static. It might be interesting to try your Muvo with a battery that doesn't have a full charge and see if it does any better.

Muvo N200 prob

I have a muvo n200 which for the past few days has turned itself off when ever i tried to increase up the volume. I tried to resintall the latest firmware upgrade but now my player has stopped working. When I turn on the player all i get is dots on the lcd screen with the backlight on. I tried to reinstall the firmware again and the firmware cant find the player connected to the computer, although windows explorer detects the device. Please can you help. Thanks in advance.
Model muvo n200 GB
Computer dell optiplex gx270
windows 2000 service pack 4

If it's recognised on the PC, try formatting it first and then try updating the firmware again. If you can try the player on another PC, try updating the firmware there to see if it works.
Otherwise it would be best to contact Customer Support for assistance, the player could be faulty.
Cat

MuVo Noise Prob

I got my MuVo GB about 6 weeks ago. It was fine until yesterday when it started making a weird whirring noise on the mp3 tracks. I have changed batteries a few times and changed headphones, so that is not the problem. It sometimes happens that I play a song and the sound is there, then I play it again and it is gone, but 80% of the time there is this awful electronic loud background noise that drowns out the music almost. The noise is in synch with the music being played. Is it a reading problem with the player? If I hook the player to my PC and use the PC to play the track from the MuVo memory there is no problem. Any thoughts on this? I figure I will have to return this player to the shop/Creative for a replacement. How long is the guarantee for anyway? Thanks for any suggestions.
Stephen.

I formatted the flash dri've on the MuVo N200 and it made no difference to the noise problem. Then I looked on the Creative site and found reference to a "distortion" noise in the frequent problems section. I updated the firmware and this seems to have solved the problem.

MuVo transfer prob

I tried to transfer 8 songs onto my MuVo - 4 from CD's and 4 protected downloads from MSN Music using WMP. When I check the MuVo dri've in Windows Explorer, all 8 songs are present. When I disconnect the player to listen, only the 4 songs from CD's are on the player. Can anyone help?
Thanks!

jb207,
In addition to Mattan advice, you will also need to transfer WMA DRM protected files through either Mediasource or Windows Media Player to the player. Only such application allow the license to properly transfer over to the player.
Jason

MuVo Slim Prob

I have a serious problem with my MuVo Slim. When I turn it on it plays perfectly but when I try to turn the volume up or down it just shut's down. Sometimes I have this problem but there are times when it plays in the normal way. Could someome tell me what is going on and what I have to do to fix this problem?
Sophie

Reload the firmware. If you don't know how to do that, search the forum for information.

Muvo player prob

I have the plain 28MB player with no screen. well one day it froze, wouldnt play at all. i put in a new battery, still didnt work. And nothing till detect it,computer, xbox nothing. when i try to open it in my PC i get this message.
"H:\ is not accessible
The request could not be performed because of an I/O device error" i dont know what that means.

The manual says that a flashing red light is a battery problem. Have you checked your battery contacts and cleaned them up? How is the player when you connect it to your PC?
You could try a firmware update - there was a new version on the UK site in July of this year. It needs Recovery Mode so make sure you follow the instructions to the letter. You also need to d/l and install the Mass Storage Driver at the top of the page first.
PB

Muvo 4GB prob

I recently found my Muvo2 4GB and have lost the manual. I see here from the site how to play a song(s), but after I navigate to "music" on the muvo, and press play, nothing happens. There is music on the muvo that shows.

I believe I put them on when I got the thing. (using the software, which I cannot find since it's on a now dead HD) The songs show on the LCD, and when I plug it into my pc it shows as a MUVO, and the folder shows A lot of songs, I simply can't get anything to play when I push the play button.

MuVo V100 Prob

Hello,?I have had the Creative MuVo V00 for quite a few months now. Up till very recently, I have been having no problems with it until now.
I added some new songs to?a folder?and when I play the folder on the Mp3?it skips?the songs completely and I am not able to find them!?However, it'sworks perfectly fine on the computer. At first I put?them in a folder?(which already had songs in it before)?under 'Root' and then?I moved all of them under 'Library B'. It still skips the same songs in both folders when I try playing it. Another problem is that sometimes, the order of the folders under 'Root' change. If anyone has solutions to these problems, I would be very grateful!

I don't think that the MuVo series can address sub folders [folders within other folders].
I save albums in separate folders on my computer and then drag an entire album folder to my MuVo, so I'll usually have 6 or more folders at a time in my 52 Mb MuVo.
You could do it as playlists too- a group of songs in each folder, but I don't think that the MuVo can access a folder inside another folder, because of file structure limitations.

MuVo T100 Prob

I have strange problem with my mp3 player. When I bought it, it was all ok, I uploaded songs etc. But now mp3 player is just recharging but computer don't recognize it, I can't upload new songs. I don't why :/ Any sugestions ?

Hi?I have an N200 as well and this sort of random switch off is normally fixed by a firmware reload. Look at the link in my signature line to the different versions of N200 firmware - the best thing to do is to reload the same version as you already have. If your version isn't listed or the links don't work then post back and I will find you a copy. PB

Micro muvo n200 prob

i have had ny n200 about 6 weeks and everything seemed fine until about a week ago when it would just shut-off all of a sudden.
it seems to turn off when it switches from one song to the next.
sometimes it plays song and shuts down other times 5-5 before it shuts down.
any idea what is wrong?

tneffy:
Unusual problems like this on the N200 can almost always be cured by re-loading the firmware. Download the latest version from
http://www.nomadworld.com/downloads/...uVo Micro N200
Make sure you follow the instructions exactly on that page.
PB

I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

I'm try to buy a movie from iTunes with my I pad 3 and it tells me there is not enough local storage and when I go to my local storage there is a lot on free storage I also restarted my ipad but still the same prob what do I do?

5GB is typically not enough space to download a movie. Often, movies take from 3 - 5 GB to begin with. The only option you have is to delete more things from your iPad. You can remove unused Apps, pictures, music, text message (messages with pictures can take up a lot of space), email messages, books, magazines etc.

Running probes on shared storage?

Hi. I'm trying to avoid the hassle of having to manually shut down the probes every time I need to do maintenance (mode) on my hosts. As long as the probes are deployed on local datastores this is mandatory.
How about instead putting the probes on shared storage? Would this allow for putting the hosts in Maintenance Mode?
Would the AppSpeed server somehow make sure they return to their respective hosts when the hosts return from Maintenance Mode? If not, could I create DRS host-VM-affinity rules to keep each probe on it's host?
Thanks in advance!

Hmm, apparently the probes are automatically shut down when the host is put in Maintenance Mode. I thought they had to be shut down manually. How is this done?
Well, you learn something new every day.

MuVo TX stopped playing music works as memory storage o

HiI had this MuVo TX for a while i have used in the early days as a mp3 player and later mostly as storage for files, now when i try to use it as MP3 it doesn't play or switch on, but works perfectly well as storage device. I have tried formatting. I have even tried the MP3 recovery tool still it doesn't turn on or play music (but able to copy file for storage)?Hope someone can someone rescue my poor MP3 player back. Thanks

Have you tried reloading the Firmware?
Top of page on Creative banner, click Support-> Downloads-> MP3 Players-> MuVo-> MuVo TX FM, chose your language and Operating System and select the software that you need.
Be sure to read and follow the instructions on the Show Details... pop-u
ps.
You will lose all content in your player when you install the firmware. Back up any audio or data files in your player to your computer before installing the firmware.
To install this firmware:
1. Download the MuVoTXFM_PCFW__24_02_a.exe file into your local hard disk.
2. Make sure your player is connected to your computer.
3. Double-click the downloaded file.
4. If you are prompted to reset your player, click OK.
5. If the Find New Hardware dialog box appears on the computer screen, follow the instructions on the screen to complete the wizard.
6. When the firmware download dialog box appears, click Start and follow the instructions on the screen.

MuVo storage prob

Similar Messages

Maybe you are looking for