MuVo trouble...firmw

My new Mu Vo tx fm would not play WMA files, so I attempted a firmware update. Now my unit is dead. It will not turn on. When I attempt to install the firmware EXE. it searches, then says the device has "timed out". When plugged in to a USB 2.0 port, it will be recognized as new hard ware found but that's as far as I get. (btw it DOES have a fresh battery )

Got it up and running, thanks. But am still have issues with it not playing some converted files. It installs but just passes by most ripped (from original cd) tunes. The files are not listed as protected when in media explorer so I'm at a loss to figure why they won't play. I'm new at this game and need some help, obviously.....:robotsad:

Similar Messages

Nomad MuVo trouble with on/off swi

I have two the Nomad MuVo players and love them, but when I try to turn my player on, it immediately turns red and won't play. However, if I plug it into the computer the files play fine. Is my control button malfunctioing? Can it be replaced or fixed?

Thank you! You were correct. I checked the file I had transfered a folder instead of the individual music files so I guess the player couldn't play it. It is working fine now! Thanks for the speedy reply!

Help on MuVo N200 firmw

Hello, can i know why is that when i try to update firmware on my MuVo, an error message occurs saying "Unable to write to device. Device timeout". Thx in advance.

Can you try another PC?

[Expert] Problem with Muvo² 5Go and firmwa

When i turn my mp3 player on, it shows first "Creative", then "Muvo?", and stop here. I can't listen to my mp3, can't connect it to my pc because it's not recognize anymore. Somebody has an idea on how to fix this problem?

A lot of people get the backlight buzz on different MuVo players and it is a hardware "feature" i.e. it can't be fixed by a firmware upgrade.
Different headphones can make the noise appear worse - looks like the HQ-700 fall into this category. Not much to be said apart from:
use different headphones.</LI>
turn off the backlight.</LI>
Sorry
PB

Muvo TX SE Firmw

Hello,
Why aren't there updated firmwares for Muvo TX/TX SE (The latest is .0 5feb2005...) whereas Muvo TX FM's firmwares are often updated ?
It's the same player with/without the radio function, so why updating Muvo TX FM and not Muvo TX ? That shouldn't be difficult to make firmware for these players from the MuvoTXFM firmware...Message Edited by St4rLa on -7-2005 04:4 PM

is any one going to reply to this?
i think that the muvo tx is a fine player i use it when jogging with the arm band, but
why does it not have a playlist facility? and why is the volume so low? i have to have it 3/40
the last time i did a firmware update my player wud not switch on!

Trouble with MuVo mp3 pla

I downloaded music to my new MuVo mp3 player but the player says there's no music on it. When I plug the mp3 player into the computer, I can see all the songs I downloaded but when I turn on the player - the message is no music. Please help. I can't wait to start enjoying listening to music everywhere I go. Thanks

Are the songs in the right format? I assume the muvo is compatable with mp3/.wma/.wav Are your songs in those formats? I have a muvo tx fm 256mb and those are pretty much the files that I think it supports. Are your songs in those forms?

Muvo N200 decreses free space when update firmwa

About 4 months ago i bought a Muvo n200 256?MB?but since then i have been updating the firmware.
When i updated it for the first time my free space was reduded to 242.29 MB
I tried formating it but it wont work !
Why is this happening? What can i do about it <FONT size=6>?
?Message Edited by andros344 on 2-30-2005 04:29 AM

andros344 wrote:
Its 2:38 am and i just tried it but it says there is some kind of error and ii end up in the same firmware
I have only heard of one person in here who managed to get an earlier firmware back on once they had gone to .5.0 or beyond. They put on .0.02 - get the link to it from this excellent post by dingens.
I have tried to go to .2.0 and couldn't get it to work - haven't tried .0.02 yet - I'm not feeling brave enough!
PB

Muvo - volume is too high with new firmw

Hi.
I have a Muvo TX 52 mb with usb2.0, and when i upgraded the firmware to .3.something some months ago i got a problem:
I cant decrease the volume enough with the new firmware!:angry: With the old firmware was volume setting "" very low, and the maximum volume wasnt very high. The new firmware has better mawimum volume but the minimum volume is too high... :-S Hope you understand what i mean.
Today i tried the latest firmware again, .2.02, but its STILL too high volume!
This is really driving me crazy, and propably i would need an OLD firmware (which is much worse in other ways), but i cant find any old firmware too download.
Please help me. Thanks!

I've mailed tech support now. If anyone has old firmware install, _please_ let me konwMessage Edited by muvotx on 07-03-2006 06:27 PM

MuVo V200 "dead" after updating firmw

I have a MuVo V200 and i tried to update it with MuVoV200_PCFW_LF__05_02.exe following the installation details provided.
Everithing seemed ok but now the player is dead: it doesn't turn on by battery nor by usb... i tried to apply the firmware again but is impossible 'cause the player is not found in the usb dri've.
What can i do? Plz help me...
PS: is there a way to avoid the pause between two tracks? It's pretty annoying with cd registered in a li've...

Also in terms of gapless playback, about all you can try is encoding the tracks with no ga
ps.
For more see the "gapless playback" link in the FAQ post.

MuVo N 200 new firmwa

Hi, just a little question: will MuVo N200 firmware still be developed in the future or is developing regarded as "done"? The latest fw is .2.0 (24.02.2005) and has still some annoying bugs (which were reported here).

gullfisken wrote:
Hi, just a little question: will MuVo N200 firmware still be developed in the future or is developing regarded as "done"? The latest fw is .2.0 (24.02.2005) and has still some annoying bugs (which were reported here).
No one knows for sure.... guess if they are rebranding the n200 to nano plus then all future firmware update for the nano plus should works for the n200..... so keep those fingers of yours crossed.

Having trouble with my muvo

i've been working on putting music on my new muvo and i still have quite a bit of space, but when i put new music on it, it doesnt show. can anyone help me?thanks

When you put music onto your player, it doesnt show up on the player?
Which model do you have?

Muvo TX SE just died after trying to update firmw

im getting seriously pissed off, i just tried to update the firmware and some reason there was error and now the player doesnt work at all and cant be recognised by my pc ! what can i do ??

If the firmware update failed then you need to connect your player in Recovery Mode (search in old posts for instructions) and install the firmware again.
PB

Fixed a frozen zen v plus.... but now trouble Installing firmw

Ok, first of all, I managed to fix the problem I was having earlier with the frozen zen v. If your player is frozen no matter how you try to manage it:?. reset it (by sticking a pin in the hole below the power?switch) if this fixes your frozen player, then you should be set, but if?it is still frozen proceed to the next step. 2. when turning your player on?again,?hold down the power on button while also holding the play button. When you?see the creative logo, press play again. you will now be in recovery mode.3. go down to the "format all"?option. *note: this will delete all contents of your player, but it will no longer be frozen. Everything should now be working. Ok, now I made the mistake of pressing the "reload firmware" option. I downloaded the firmware that was released this past october on my pc, thinking that it would be less buggy and such. So when I deleted the old firmware, the new firmware does not detect my player and cannot be added. My pc sees the zen v though. After reading a few similar threads with other players, it seems I might need to re-install the old firmware somehow. Anyone know where I can get that? or better yet how to install the new firmware??Any help would be greatly appreciated.

Mike, here's the link to where you can download the latest firmware for the V Plus:
Click me, I am a link to where you can download the latest firmware for the Zen V Plus!
Hope that hel
ps.
Message Edited by Trance on 2-27-20060:36 PM

Trouble wif my MuVo N

having probs. i can't access any applications(is tat wat u call them) on my player, "skip folder", "play mode" etc etc, i can scroll thru the music tho and get to the list of applications page. everytime i select skip folder or play mode or radio or settings or any of the applications, my player turns off. Help plss been stuck on the "Replay track" for week

okok i got it thx ppl. Downloaded the wrong firmware zzz sheesh.. lol anyhoo thx

MuVo V100 volume troubl

i'm quoting that somebody wrote already:
"...And another thing that annoys me is that the volume goes from 0 to 25, but the max volume is at 20, it doesn't change at 2, 22, 23, 24, or 25... I think they applied the limitation at 20, and the other fi've levels are useless..."
is there any way to resolve the problem?
ps my device has US firmware

sorry for my emotions.
i reloaded the latest firmware several times.
i used heaps of earphones with different impedance to be sure these ain't the cause of the problem.
i checked up for condition of the "restrict volume" function. it's disabled. nothing hel
ps.
when equalizer AND bassboost are disabled then volume at level 25 is very loud. but when either EQ or bassboost is enabled then maximum volume decreases to level 20 and volume range from 20 to 25 becomes useless. that is the problem.

MuVo trouble...firmw

Similar Messages

Maybe you are looking for