Muvo Tx 256 and Track Reversal prob

I have this nagging problem with my Muvo. I will take folders of music, audiobooks etc. and drag and drop them onto it. On my pc, they are in proper order. On the Muvo, however, sometimes they are in proper order, but more often the entire folder is in exact opposite order of what they should be. Therefore I have to play the last track first and continually back up in order to hear things as they should be. Not so bad with music, but with books it's an absolute nightmare. Any ideas what could be causing this? Solutions?
Thanks in advance....

Make sure you are using the newest driver for your operating system. Torstein Please help me with my post: A Petition to ask Creative to update the firmware of the Zen Touch to Include EAX capabilities.Message Edited by Torstein on -06-2004 05:33 PM

Similar Messages

Creative MuVo TX 256 and I-trigue 3

Hi, i recently purchased a creative i-trigue 3500 and i already own a muvo tx 256. I was lookin forward to using the M-port on the I-trigue to play music, but when i plug the USB part into the Mport and start the device, no music =(
The speakers themselves works fine and looks even better, but im quite bummed about the Mport not working with my player. I looked at the manual and it said it supports muvo NX. Kinda dumb for creative to make a new speaker system to support an older muvo and not the new one <IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-sad.gif" width=6 border=0>
I updated my muvo TX with the .0.05 firmware and still nothing.
Im really hoping that someone can help me out here.
Thanks much

mickie,
The MuVo TX does not work with the M-Port. At this moment, only the MuVo NX is compatible with the M-Port feature.
Jason

MuVo TX FM and Debian Linux Prob

Hi everybody,
I have bought a "MuVo TX FM" last week. I am using debian linux 3.0 r4 as operating system.
Copying mp3's from linux to the player is fine. But after copying, when i turn on the player, it hangs when showing the message "MuVo TX FM" and i can do nothing not even can't turn off.
Can anyone tell me, what is the problem and what can i do for this problem ?
Note: I know "MuVo TX FM" normally doesn't support linux. Still, i am looking for an workaround.
Thanks in advance.Message Edited by mamun on 07-06-2005 0:28 AM

If it's a Subscription/monthly fee type service then the MuVo players aren't compatible.
If it is just a Download service then they should work. How are you transferring the files to your player You need to use Creative MediaSource, Media Explorer or Windows Media Player for DRM (protected) music.
PB

Creative Muvo TX FM and Yahoo Music prob

We bought both our daughters a Muvo TX FM for Christmas. We joined Yahoo Music and are trying to transfer songs to the device. We keep getting an error about the license not being valid. Could you tell me if there is a way to fix this?
Also, what music download sites are compatible with the TX FM?
Thanks,
Krista

If it's a Subscription/monthly fee type service then the MuVo players aren't compatible.
If it is just a Download service then they should work. How are you transferring the files to your player You need to use Creative MediaSource, Media Explorer or Windows Media Player for DRM (protected) music.
PB

Muvo NX 256 no longer recognised by Windows and no recovery m

My Muvo NX 256 (firmware .0..07) has been working fine for months, until it intermittently failed to appear as a dri've when plugging it into a PC. Now, it always fails to connect. I've tried on different Windows XP PCs, so it's not a USB port issue. The player works fine standalone, but I cannot transfer any tracks to it.
I've tried to access recovery mode to use the "connect to PC" functionality, with no success:
- holding "menu" while inserting the battery does not do anything
- holding "play" while inserting the player in a USB port simply starts the player, and it still doesn't appear under Windows
Any advice?
Thanks

If recovery mode doesn't work then the player is faulty unfortunately. If you're still under warranty, contact Creative Support (although you can still contact them for an out of warranty repair).

Muvo NX 256 no longer recognised by Wind

My Muvo NX 256 (firmware .0..07) has been working fine for months, until it intermittently failed to appear as a dri've when plugging it into a PC. Now, it always fails to connect (I've tried on different Windows XP PCs, so it's not a USB port issue). The player works fine standalone, but I cannot transfer any tracks to it.
I've tried to access recovery mode to use the "connect to PC" functionality with no success:
Any advice?
Thanks

If recovery mode doesn't work then the player is faulty unfortunately. If you're still under warranty, contact Creative Support (although you can still contact them for an out of warranty repair).

Dynamic Link and Footage reversed in Premiere Pro

Hello community,
I've had this problem since cs5.5 and just found ways around but I've had it and want to find a solution. I do a lot of nightlife videos and sometimes it requires me to reverse footage in order to get a desired effect. The problem I have is when I try to bring it into after effects using dynamic link, AE actually reads the footage backward versus making a new clip... it is a little awkward to grasp but let me tell you some of the problems.
1. The tracker in AE can be used for matchmoving or stabalization. When I would apply a track and have it run, it would go in the right direction versus the reverse I am looking for. I would move the cursor to the beginning and track backward but then the clip I brought it won't have the tracking markers
2. Making transitions using masks for a quick roto is simple and straight forward but when I would copy that mask I just made to another clip to apply like a reveal, the mask would freeze and all the data is gone. Frustrating.
I am on CC now and there are a few other problems I can't remember with a fuming head but that is the jist of it. Normally due to deadlines I would just un-reverse the clip, bring it into after effects, do my magic then bring it back and reverse it again.
I want to know if this happens anyone else and either how to fix or how do you get around?
Thanks a bunch,
A fellow artist
-MMK

I do a ruff cut in PPro and then open the clips I need to work on in AEFX independently. No LINKS.
I export a Digital Intermediate from AEFX for PPro.
Find this a lot less complex , flexible and manageable.

Major problems with Creative Nomad MuVo NX (256 MB)

Hello, I recently brought a Creative Nomad MuVo NX (256 MB) it hasn?t been more than two months and I?m already having problems with the MP3 player. This is a little hard to explain but, the headphone jack (where the headphones connect to the player) whenever it moves (to the left, right, up, or down) the sound dies, or gets very staticy. There is no way I can play music this way, as the connection moves a lot. Is there anyways I can fix this? I hear that Creative will replace my product if it'ss withen 90 days. I also have proof of purchase, and original retail box materials.

obiant, this has been a problem frequently with some older models of the Zen Extra, although I have not heard of this in a Nomad Muvo. What happened with the Zen Extra is the headphone Jack was just soldered on to the motherboard with nothing to hold it on. After awhile the soldering job on the jack would loosen and sometimes break off. After a awhile creative then added a piece of plastic to keep the soldering from loosing. This may be you problem and if it is I?m surprised that creative would make that mistake twice. You should email Creative tech support to see what they think, they can also arrange to have the player sent to them for repairs.
I hope you get it working or fixed.
Email for creative tech support: http://us.creative.com/support/custs.../emailform.asp
Torstein.
Please help me with my post:? A Petition to ask Creative to update the firmware of the Zen Touch to Include EAX capabilities.[/b]

Podcasts and track markers

I record a podcast (music) typically using Sound Studio Pro. I usually then go ahead and "track" the podcast in Sound Studio Pro (markers), and those markers show up when I play the resulting AIFF audio file in Quicktime.
I want to then use GarageBand to add track names along with artwork.
Is there a way to create separations on the podcast track using the track markers? It's annoying to have to go back and re-track the audio every time.

If they're playing one episode then stopping, you have the shuffle songs/albums feature turned on. I know it sounds daft - but if shuffle is off, Podcasts will play one after another. However, they'll play in reverse order - newest to oldest! At least, that's what most of us seem to find.
Note though, if you turn off the shuffle while playing a Podcast it will have no effect - they'll still play one at a time. You would need to start a song, then go back to the Podcast. The same happens (in reverse) if you turn on shuffle while playing a Podcast.
I know it's weird, but try it. As soon as you start the first of several episodes you'll know what it's going to do by looking at the X of X in the display. 1 of 1 means it'll play one at a time and 1 of 6 (for example) will play them all.
I've yet to understand the logic behind the iPod's handling of Podcasts, and each model of iPod I use (5th gen, Classic and Touch) does it differently!
The 5th gen will only play one at a time which is useful since they're listed in reverse chronological order.
The Classic also lists them in reverse chronolgical order but has the option once you know the trick/secret method to play them one after the other, or not if you choose. However, because they're listed in reverse date order, they play in reverse date order, which is not very helpful so I choose the play one then stop option.
The iPod Touch (32GB) will only play Podcasts one after another without automatically stopping but they are listed and therefore play in correct chronological order. (Well - I haven't found a method for switching this off yet anyway.) Best of all, you can see how long an episode is before starting it playing and it will indicate a part-heard episode and list the remaining time of it as well.
So although you may think that Apple haven't got it quiet right with Podcasts yet (as I do), they are getting better. And of course, the iPod is the best Podcast handler I've seen so far.
Phil

MuVo TX 256 stopped playing

Hi. I need help with MuVo TX 256.
I am a MuVo TX 256 new user. I bougth my little mp3 player fi've days ago and i have a problem. The MuVo TX 256 sotpped player musics 0 minutes after starting work. The battery icom is full, I already updated the firmware, formated the device and the problem sttil happening. The musics are mp3-28 bits format. I don't know what can I do....
Regards....
Andr? Lima

The flash players are all very easy to use, we have a few different ones, it's best to look at the product pages to see which you prefer. In roughly the same pricerange as the TX 256, we also have the MuVo TX FM 256, the MuVo Micro 256MB, or if you want to spend a little more (and have more storage), there are larger capacity versions of each of the above, and the Zen Nano (52MB or GB), Zen Nano Plus (52MB or GB), MuVo Sport C00 256MB and MuVo Slim (256MB or 52MB).
The product pages are linked on this page:
http://us.creative.com/products/welcome.asp?category=23
Cat

How do I find the apps and tracks associated with my ex-husband's account to delete them OTHER than 1 by 1-running Windows 8?

I recently migrated my extensive library from a Mac authorized with both my and my ex-husband's id's to a Windows 8 machine only authorized with my id. I am finding that a good portion of the apps and tracks are still only authorized by his. How do I find these so I can delete them from my library? Finding them 1 by 1 has been VERY tedious. I have seen a script for the Mac to do this, but no solutions for Windows.

It doesn't sound like the Exchange environment is configured in a manner to support these types of clients very well. Have your Exchange team look at the following
http://blogs.technet.com/b/exchange/archive/2012/11/26/supporting-windows-8-mail-in-your-organization.aspx
http://blogs.technet.com/b/exchange/archive/2013/10/18/supporting-windows-mail-8-1-in-your-organization.aspx
From the latter article: "Communications applications can connect to a corporate Exchange service
configured to require certificate-based authentication. User authentication certificates can be provisioned to Windows 8.1 devices by administrators or end-users can browse to certificate and install to user certificate storage."
You might want to:
Ask your Exchange team the public URLs (ExternalURL) for Exchange OWA & ActiveSync
Open the OWA URL in your Internet Explorer from your Surface
If you get a Certificate warning, open the certificate and select Install (NOTE: You may have to install the entire certificate chain). Your desktop support team should be able to support this because it is the SAME process for standard Windows 8x
desktops.
Confirm that you can open OWA on your surface with no more certificate or security warnings. NOTE: The Exchange team will have to configured OWA properly.
Once confirmed, repeat the same steps for the activesync URL that they provided.
When done, try using the OWA OR ActiveSync URL value in your settings of your Mail client.
Good Luck

MBP keyboard and track pad not working

Today the keyboard and track pad on our mac book pro laptop just stopped working. The mouse connected to it by usb continued to work but we can't type or anything. We tried the ^F6 keyboard shortcut but it did nothing since of course the keyboard isnt working. And it is also not the number lock key. The computer was working fine all day up until now. It is just under a year old. Any ideas?

I'm having the same problem. It appeared yesterday and then magically "repaired" itself. My MBP was fine today. Tonight the problem is back. No response from the keyboard and track pad. Track pad works fine using a USB mouse. My problem appears at start up. The cursor is in the usual upper left hand corner. It can't be moved. Restart, sleep then restart do not solve the problem.
Suggestions?

Does iOS have the ability to automatically show me shipping and tracking info or flight status based on information in my email?

I am considering switching from an android to an iPhone and one of the features I use heavily on my android is my google now cards. It automatically reminds me to check in for flights and gives me flight status information based on flight information in my email. It then shows me a card for the weather where I am and where I'm going. I also use it for shipment tracking; if i have an email that has a shipping confirmation number, I have a google card that automatically shows me the tacking number and tracking status. I was wondering if Apple had something similar and if it was through Siri or something else? I have an iPad and I haven't seen features like these on it. Everything I've read about Siri so far is that the information given is based on you prompting with a question as opposed to proactively giving me information I need, which is more how I use my android today. If the answer is to us the google now app for iOS, does will it interface with my email and calendar to make relevant cards seamlessly on the iPhone like it currently does on my android phone? Thanks in advance for the help/advice!

I am considering switching from an android to an iPhone and one of the features I use heavily on my android is my google now cards. It automatically reminds me to check in for flights and gives me flight status information based on flight information in my email. It then shows me a card for the weather where I am and where I'm going. I also use it for shipment tracking; if i have an email that has a shipping confirmation number, I have a google card that automatically shows me the tacking number and tracking status. I was wondering if Apple had something similar and if it was through Siri or something else? I have an iPad and I haven't seen features like these on it. Everything I've read about Siri so far is that the information given is based on you prompting with a question as opposed to proactively giving me information I need, which is more how I use my android today. If the answer is to us the google now app for iOS, does will it interface with my email and calendar to make relevant cards seamlessly on the iPhone like it currently does on my android phone? Thanks in advance for the help/advice!

Key board and track pad not working

Ok, My situation is similar to some of the other things posted but not quite.
I tried to wake my computer up from sleep the other day and it wouldn't "wake up" so I did a hard shut down and restart. When it restarted the key board and track pad did not work. The caps lock light wouldn't come on or anything. I tried connecting a usb apple keyboard and mouse and those didn't work either.
When switching to windows in bootcamp, everything works. So... I guess that means it's a software thing.
I called Apple support and we did all the possible key combinations and restarts possible and it came down to this: I need to archive install tiger again, then install all of the updates, then install leopard back on (I don't have leopard disk because it was a family pack and im at college). My roomate's macbook (White, bought in aug 2008) install disks which are 10.5.2 do not work with my computer.
My question is: Is this really the correct solution to my problem? Will archiving and installing tiger then leopard affect my files? I haven't backed up using time machine in a month, so is there a way to backup through osx with my keyboard and trackpad not working or can I do a good back up through my windows partition in bootcamp? Any more tips? Thanks, this has never happened before and I guess I'm a little clueless.

Do you have access to another Mac? If so, possibly you could use Firewire Target Disk Mode to access your drive and do a current Time Machine backup:
http://support.apple.com/kb/HT1661
Since you have a family pack of Leopard at home, possibly you could have someone burn a safety copy of it and send it to you so that you can reinstall Leopard. Once you have the OS installed and brought up to date, you could even restore from Time Machine if you had to.
Since we don't know all the steps you took, it's hard for any of us to say if this is the right solution. Evidently the Apple tech came to the conclusion that your software had become corrupted, and this could well be the case, since everything works on the Windows partition. Hence the suggestion to reinstall the OS.
I think you need to get a copy of the Leopard disc so that you can bring your OS completely up to date. I'm not sure of the logistics of doing an Archive and Install with both Tiger and Leopard, especially if much of your work has been done on Leopard. I'm not even sure if it's necessary to reinstall Tiger--it might be better to just reinstall Leopard using Archive and Install.
It's always a good idea to have a good up to date backup like Time Machine before attempting an Archive and Install, because things can go wrong. If they do, you may end up having to do an erase and install. If that happens, you can restore from your Time Machine backup.
I think what you should do is to get a copy of your Leopard disc, and then boot from it and try to do the Archive and Install. Navigate to Disk Utility first and verify both permissions and the disk and repair if necessary. Then proceed with the Archive and Install. Once you're done, run all the updates. Then go to Disk Utility and repair permissions.
Good luck!

I used the disc and track numbers, but it won't show on my iPod as separate CDs?

Hi,
I used the disc and track numbers of get info in iTunes, and I would like to have my CDs separate like if they are 3 CDs on my iPod Classic rather then having a big long list of songs, but after using the disc and track numbers, I still don't see on my iPod which one is CD1, and etc. I took a screenshot of my iTunes. How could I have my CDs separate just like the originals?
http://imageshack.us/photo/my-images/341/89226837.jpg/
That's the screenshot.

See Corrupt iPod classic for tips if the iPod isn't working as expected and contains media that isn't in your active library.
See Grouping tracks into albums for organizational tips.
tt2

Muvo Tx 256 and Track Reversal prob

Similar Messages

Maybe you are looking for