MuVo TX 256 stopped playing

Hi. I need help with MuVo TX 256.
I am a MuVo TX 256 new user. I bougth my little mp3 player fi've days ago and i have a problem. The MuVo TX 256 sotpped player musics 0 minutes after starting work. The battery icom is full, I already updated the firmware, formated the device and the problem sttil happening. The musics are mp3-28 bits format. I don't know what can I do....
Regards....
Andr? Lima

The flash players are all very easy to use, we have a few different ones, it's best to look at the product pages to see which you prefer. In roughly the same pricerange as the TX 256, we also have the MuVo TX FM 256, the MuVo Micro 256MB, or if you want to spend a little more (and have more storage), there are larger capacity versions of each of the above, and the Zen Nano (52MB or GB), Zen Nano Plus (52MB or GB), MuVo Sport C00 256MB and MuVo Slim (256MB or 52MB).
The product pages are linked on this page:
http://us.creative.com/products/welcome.asp?category=23
Cat

Similar Messages

Muvo NX 256 no longer recognised by Windows and no recovery m

My Muvo NX 256 (firmware .0..07) has been working fine for months, until it intermittently failed to appear as a dri've when plugging it into a PC. Now, it always fails to connect. I've tried on different Windows XP PCs, so it's not a USB port issue. The player works fine standalone, but I cannot transfer any tracks to it.
I've tried to access recovery mode to use the "connect to PC" functionality, with no success:
- holding "menu" while inserting the battery does not do anything
- holding "play" while inserting the player in a USB port simply starts the player, and it still doesn't appear under Windows
Any advice?
Thanks

If recovery mode doesn't work then the player is faulty unfortunately. If you're still under warranty, contact Creative Support (although you can still contact them for an out of warranty repair).

Creative MuVo TX 256 and I-trigue 3

Hi, i recently purchased a creative i-trigue 3500 and i already own a muvo tx 256. I was lookin forward to using the M-port on the I-trigue to play music, but when i plug the USB part into the Mport and start the device, no music =(
The speakers themselves works fine and looks even better, but im quite bummed about the Mport not working with my player. I looked at the manual and it said it supports muvo NX. Kinda dumb for creative to make a new speaker system to support an older muvo and not the new one <IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-sad.gif" width=6 border=0>
I updated my muvo TX with the .0.05 firmware and still nothing.
Im really hoping that someone can help me out here.
Thanks much

mickie,
The MuVo TX does not work with the M-Port. At this moment, only the MuVo NX is compatible with the M-Port feature.
Jason

HLS encryption VOD randomly stop playing on IOS

We have 4 AMS servers load balanced (DNS) with identical application on each. RTMPe is playing fine from flash desktops, however, HLSe on IOS devices randomly stops playing part way through the content. I do not see any relevant errors in AMS/Apache. The front end player shows the following errors when the content stops playing:
"CoreMediaErrorDomain" "No response for media file in 0.49632s"
"CoreMediaErrorDomain" "Segment exceeds specified bandwidth for variant"
Similar issues discussed here: http://openradar.io/15060374 (thought not AMS specific).
This could be a player issue. It seems to randomly have issues grabbing an HLS segment. Has anyone else had any similar issues?
(the following IP's, certs, URL's have been replaced for privacy).
httpd.conf
<Location /hls-vod>
                HLSHttpStreamingEnabled true
                HLSMediaFileDuration 8000
                HttpStreamingContentPath "/mnt/store0/"
                HLSFmsDirPath ".."
                HLSJITConfAllowed true
                # Cache-control header configuration start
                # Specify the max-age(in secs) to set in the Cache-Control header
                # for different response types (m3u8, ts, drmmeta,...).
                # A value of -1 turns off setting the cache control header.
                HLSM3U8MaxAge 86400
                HLSTSSegmentMaxAge 86400
                HLSMetaMaxAge 3600
                # Cache-control header configuration end
                # Uncomment the following directives to enable encryption
                # for this location.
                     HLSEncryptionScope server
                     HLSEncryptCipherKeyFile "../creds/vodkey.bin"
                     HLSEncryptKeyURI        "https://myurl/hls-key/vodkey.bin"
                Options -Indexes FollowSymLinks
        </Location>
httpd-hls-secure.conf
<VirtualHost myip:443>
ServerName myserver
DocumentRoot "../webroot"
SSLEngine on
SSLCertificateFile    "/opt/certs/mycert.crt"
#Uncomment the following if the file specified above does not
#have the private key
SSLCertificateKeyFile "/opt/certs/mykey.key"
#Client Authentication configuration
#SSLVerifyClient require
#SSLVerifyDepth       9
SSLCACertificateFile "/opt/certs/myintermediate.crt"
SSLOptions           +StdEnvVars +FakeBasicAuth -ExportCertData +StrictRequire
<Location /hls-key>
HLSEncryptHostCipherKey true
HLSFmsDirPath ".."
HLSEncryptKeyRepository "../creds"
SSLRequireSSL
# SSLRequire %{SSL_CLIENT_S_DN_CN} eq "iPhoneOS Device Certificate"
</Location>
</VirtualHost>

I just wanted to add an update in case anyone else runs into a similar issue. I seem to have found a solution to the problem. Here's what I did:
1) Plugged in to my computer and removed all music from my iPod (just unselected "sync music" then allowed the iPod to sync).
2) In iTunes, under the summary tab of my iPod, I selected "convert higher bit rate songs to 256 kbps AAC" in the options section.
3) I synced my iPod. This took a REALLY long time, as I have just over 52GB of music that I chose to put on my iPod. This is 52GB AFTER the conversion to 256kbps. Anyway, it took a couple hours to sync the first time because it had to convert almost every song. After the first sync, it doesn't take long to sync unless I add a lot of songs and even then, it only takes a few minutes.
I've listened to my music on a variety of devices (in my car, different types of headphones, computer at work etc) and haven't noticed any degradation in quality, despite the fact that nearly all of the original music files on my computer are 320kbps. I'm not sure if the problem I was having was due to the higher bitrate or the fact that the original music files are a variety of formats (aac, mp3, wav, and some others).
I did this later in the evening after I posted the original question and have not had a problem since (about 15 days). Skipping songs seems to go a lot faster as well. I use my iPod a good 6-10 hours everyday, so I think that having no problems in the last 15 days is pretty good evidence that this is a good solution.
Hopefully this is helpful to anyone that stops by here

Major problems with Creative Nomad MuVo NX (256 MB)

Hello, I recently brought a Creative Nomad MuVo NX (256 MB) it hasn?t been more than two months and I?m already having problems with the MP3 player. This is a little hard to explain but, the headphone jack (where the headphones connect to the player) whenever it moves (to the left, right, up, or down) the sound dies, or gets very staticy. There is no way I can play music this way, as the connection moves a lot. Is there anyways I can fix this? I hear that Creative will replace my product if it'ss withen 90 days. I also have proof of purchase, and original retail box materials.

obiant, this has been a problem frequently with some older models of the Zen Extra, although I have not heard of this in a Nomad Muvo. What happened with the Zen Extra is the headphone Jack was just soldered on to the motherboard with nothing to hold it on. After awhile the soldering job on the jack would loosen and sometimes break off. After a awhile creative then added a piece of plastic to keep the soldering from loosing. This may be you problem and if it is I?m surprised that creative would make that mistake twice. You should email Creative tech support to see what they think, they can also arrange to have the player sent to them for repairs.
I hope you get it working or fixed.
Email for creative tech support: http://us.creative.com/support/custs.../emailform.asp
Torstein.
Please help me with my post:? A Petition to ask Creative to update the firmware of the Zen Touch to Include EAX capabilities.[/b]

Problem:Imported video is choppy and then camera stops playing

I'm using a Sony DCR-HC96 connected to my Macbook, tried both Imovie HD and Imovie 08 and I have the same problem. When I try to import the video, the playback from the camera is very choppy, and after a few seconds the camera stops playing. If I just play the camera without importing, the footage is good. Sometimes the choppy-ness is right away and other times i will be able to import a few minutes and it starts again...
Addendum: Just realized I posted this in the Imovie 11 forum. My Bad, as the saying goes..I will post it in the Imovie 08 as well.
Message was edited by: J.M. Lachance

As the drive fills and you're going farther and farther into the disk it gets more and more problematic. When the drive is empty you're writing on the outer portion of the disc. The more it fills, the disk area gets narrower and narrower and slower and slower compared to the outer portion. USB drives that deliver information in bursts have more problems with this than drives that have sustained throughput like FireWire. For video, which requires sustained data delivery, this can be a problem. Depending on the computer and how full its drive is you can sometimes get better performance with DV capturing to the internal. It might be worth a try.

My itunes has stopped playing music. I have unintalled all apple apps and reinstalled and updated but nothing has worked. What can I do to fix this?

My itunes has stopped playing music. I recently downloaded more music and now it has stopped playing, it says it is playing but there is no sound and the time bar does not move from 0. I have uninstalled all apple apps on my laptop and reinstalled and then updated the software. I have tried 'repair' aswell but nothing has worked.

Songs in the itunes store are also not working

Telling quicktime to stop playing if switched to another tab or browser?

Hey Everyone
Ok say i have a movie on a web page which is playing, and the user switches to another tab or browser window, is there anyway to tell quicktime to stop playing if this happens?
Thanks for any help

No.
Unless the browser has that feature.

How can I get an flv video to stop playing when I exit the page it's on?

The audio continues to play no matter where I navigate on the site.
Thanks

You want to stop the audio from playing and also downloading more video/audio if it is still downloading when you go to a new keyframe where the video display/component or mp3 player is removed from the stage because it's keyframe ended or do not exist anymore but you still hear the audio.
Add an event listener to your video playback component that calls a function when the flash player tries to remove the video plaer from the stage that stops the netstream or at least stops/pauses the video playback.
[link removed]
//sample NetConnection and NetStream classes when the video player is removed from the stage tell the NetStream to stop playing or downloading the content with .close();
var connection:NetConnection = new NetConnection();
connection.connect(null);
var stream:NetStream = new NetStream(connection);
addEventListener(Event.REMOVED_FROM_STAGE, videoRemovedFromStage);
function videoRemovedFromStage(e:Event){
stream.close();

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

Why do some podcasts stop playing & how do I fix it?

Hi.
I seem to have a bug with some of my podcasts. I subscribe to a few and I've noticed that sometimes there will be a "bug" in a particular episode which means it just stops playing at a particular point in the item - this can be at the beginning, middle or towards the end. At first, I thought it was only related to some of the more "amateur" podcasts I subscribed to. But now, I've noticed that it is also happening with a high quality series I subscribe to. It doesn't happen on every episode/file; eg, two will be faulty and then the next two will play fine.
Any ideas on what could be causing this bug and how to overcome it?
thanks
Sean
iMac G4 Mac OS X (10.4.6)

Yes and no. I just got my wife a Nano, but before that I was the only user and account. Yes, I run as admin occasionally - had the same results either way.
I changed all the type tags for the items in my library (and then deleted them for good measure - I drag and drop, not sync, so my library isn't that important anyway). I'll give this a try and see if it works. I guess time will tell.
Thanks for the idea of checking the Type tag!! I wasn't aware of that. It gives me some things to experiment with.
Thx! S

My ipod touch has stopped playing through my Sony docking station, It only plays through i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

My ipod touch has stopped playing through my Sony docking station, It only plays through the i pod. It's not the docking station as my daughter's ipod works fine on it. It can synch when connected to computer. Any ideas what is wrong?

Have discovered that I had not in fact updated the ios!!
Went through the process last night and my ipod now works fine on my docking station.
Thank you very much for your advice.

Looking for a music app that doesn't stop playing music when album over

Back in the 90s, I had a 5 disc CD player. When one album was done, it would move to the next album.
With iTunes, one album was done, the next album would start playing.
With iPhone, one abum is done, music stops playing.
I don't understand the logic behind the iPhone music app. This is especially bad for when I'm driving.
I'm looking for a type of Music app that either:
1) Allows me to swipe to next/previous album as well as next/previous track. (maybe a swipe up/down command)?
or
2) Allows me to display all songs, but sorted by Artist or album (that way I automatically have one long
or
3) Will automatically advance to the next album when the current one is done.

Bob, I have the guide, just didn't think of the playlist angle. I was looking for the genre/Siri thing. But hey, making a playlist worked.
Demo, yes Siri works now that I've made a playlist and say "playlist" And I'm satisfied with the fix.
But you'd think apple could make playing music more convenient. I took off all my music and retagged it, leaving all info blank (ie: albums and artists etc) and leaving only genre because it's so difficult to get it play a genre. I'd pick a genre, start with a song and it would play only songs from a single album. I've read of some odd fixes for this and a couple of them worked...sometimes! (If you stand on one leg and whistle Dixie kind of things) Ridiculous!
By eliminating all tag info except genre I fixed that issue and can now play by genre.
But as of now Siri still won't play Gospel music by my asking, she still replaces my spoken "Gospel" with her "Christian & Gospel" which like I said doesn't exist. And correcting Siri doesn't work. All my music falls into 3 genres, 2 of them Siri handles perfectly, Gospel she messes up.
Bottom line - I shouldn't have had to make a playlist, or played with the tagging of my music. Apple says you can play your music by genre, and it should be simple to do so.

Music stops playing but Music app still shows as playing

My wife's 4S keeps having problems while playing music. The sound will stop, but the Music app shows it is still playing. I don't really know what to even try to do to fix this. I may try restoring it. Might be a hardware issue. Any others have this happen? It is one of those issues that occurs at random so its hard to pin down. I may also have her try listening to Pandora for awhile and see if it does the same thing. Might be able to nail down if it is app related or hardware. Nevertheless, that would be one additional thing to tell Apple I tried.

The question is old, I'm not sure if the problem is the same as mine.
Symptoms:
I will be playing music
The song stops playing
If I skip a number of songs I will sometimes get one that works
If I return to "Songs" and search for the song, it will show up with a "download from iCloud" symbol
If I stop playback, then tap the "Download from iCloud" symbol, the song will eventually start playing again
Platform:
iPhone 4
iOS 7
Apple's Music app
Synced using iTunes
iCloud settings (Settings -> iCloud) only cover Mail, Contacts, Calendars, etc
I do NOT have "iTunes Match" turned on, nor am I subscribed to iTunes Match
I do have "Show All" turned on for Music and Videos (Settings -> iTunes and App Store)
I do have "Automatic Downloads" turned on for Music, Apps, Books (Settings -> iTunes and App Store)
I have "Use Cellular Data" turned off in Settings-> iTunes and App Store)
My Music app is signed in for Home Sharing
How I have worked around the problem for the meantime: when listening to music, turn the iPhone 4's "Airplane Mode" on. Sure, I can no longer make or receive phone calls, iMessages, SMS, browse the web, or anything else but at least my music doesn't spontaneously stop.
I have not had problems with the iPhone ceasing playback of music that I loaded onto the device from CDs (i.e.: the problem only occurs with songs that I've bought from the iTunes Music Store).
Having reviewed the settings, I've turned off "Automatic Downloads" in case that's what has caused my problem (i.e. iOS 7 is getting confused about the song being on my iPhone already so it deletes the song and then re-downloads it). This problem has only occurred once every few months, so it's going to be very difficult to verify that any fix or workaround actually works.

HT1459 After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time.What now?

After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time also there would be duplicate songs in the same folders.What now?

Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0

MuVo TX 256 stopped playing

Similar Messages

Maybe you are looking for