MuVo TX 512MB - Error Transferring Fi

I have just bought a MuVo for my daughter.
The first thing I did was a firmware update. I used this one:- MuVoTx_PCFW_LF__2_02e.exe. It took about 4 goes to get the player recognised. But got there in the end.
We are now trying to transfer files onto it. I have a MicroPhoto, so am reasonably competent using Creative Media Source. All went well for a while, then we got error messages saying the file couldn't be transferred. Some of the tracks had transferred, but they 'skipped' during playback. Songs from the same album have been successfully transferred to other players; there is no DRM; we own the original purchased album. In desperation to get these tracks on the player, I have started recording them, converting to mp3 and then transferring, one track at a time. The first 3 tracks were fine, then got the same error message for the 4th track. Also, each track took longer and longer to transfer. I noticed that the playere was a starting to get warm, so disconnnected it, allowed it to cool down and tried again - success!
Can anyone one help with what is happening here? It's getting very frustrating. This is not the ease of use I had expected.
I li've in England
Thanks in advance.Message Edited by NoAngel on 07-03-2006 03:2 PM

Try to use Explorer instead of any Creative software, its a lot easier and propably works better too.

Similar Messages

Error Transferring Files questi

I purchased a Nano Plus from Craig's list. It is only 4 months old - i was given the receipt. I uploaded several songs that were saved on my hard dri've, burned from CDs. The player worked great. Then i purchased 8 songs from Walmart.com. The first six uploaded fine, but the last 2 had license problems. I emailed Walmart and they got that straightened out. Still, those last 2 will not upload to the player. Everytime i try it says "Error transferring file". These files are wma files, which i read my Nano is supposed to recognize. Even though the first 6 uploaded to the player, when it comes to that song it skips over it. I went to the creative labs website and read their technical advice. It said to delete the PC music library - I did. I then tried to upload a song saved on my hard dri've (an mp3 file) and it again said "error". Their next suggestion is to do a firmware upload which will erase my player. Should I do this? Any idea what is going on? Thanks for any suggestions.
Shellie

Update, i deleted all the files and it let me put them back on. I put them all into small folders. Now, my problem is, it put ALL the songs on like they worked fine. When the wma format ones that i downloaded from Walmart,com come up, the title shows up on the screen but it skips to the next song. Should i have done something -set something up on the player to accept these? Thanks for your help. I bought this used and the only manual i've got is the online one.
Message Edited by shelliek on 04-09-2006 05:43 PM

Error transferring Napster songs but not regular m

I have problems tranferring napster downloaded songs(I'm a paid napster to go subscriber) but i can transfer regular mp3 files just fine to my zen micro. The errors i get are as follows:
Napster gives an error of "the device has stop responding"
MediaSource gives a generic transfer error
WindowsMediaPlayer gives a "i/o thread error"
Again, with mediaplayer and mediasource i can transfer just fine a regular mp3.
I am using the lastest firmware and drivers, and XP. Any ideas?
Thanks

MAJOR KUDOS to DM/GURU! THIS WORKS! (at least for me)
I purchased my Zen Vision: M-- arri'ved yesterday--- wasted no time in Napster to Go (NTG). All seemed well until later when I began receiving error transferring messages on two different (powerhouse video-editing) computers. An additional problem seemed to be Napster freezing up, and Windows Explorer not finding file system. I was up till 4 a.m. trying every solution-- never considered Windows Media Player software as tbe culprit. Just found this advice and gave it a whirl-- downloading all three-- and ALL IS WELL!
Just a note-- when you download the LAST (fix for large data transfer) there are numerous download links-- they all seem to correspond to various languages---<FONT color=#330099> the FIRST one (ending with ENU.exe) is for English.
Just to make it easier to find... The 3 hotfixes from Microsoft which are available are:Windows Media Format 9.5 Runtime: http://support.microsoft.com/default.aspx?scid=kb;en-us;8922DRM performance fix:http://support.microsoft.com/default.aspx?scid=kb;en-us;902344Fix for large data transfers:http://support.microsoft.com/default.aspx?scid=kb;en-us;89536The first 2 are listed in the FAQ's.. I'm hoping the 3rd makes its way there as well.

Muvo TX/File Error Sys

Hey people,
I have a problem with my Muvo TX USB 2.0 :
when i try to switch on my mp3, "File Error System" appears on the screen and the player switches off on its own.
When I plug it in my laptop, i'm unable to access the hard dri've but I can see the player's supposed not to have any free space (O octets) !! But I have no file into it...
I can't do a single thing with it !
Please help !
I'd really like to solve this problem !

Trifina wrote:
I tried that already and got an error message telling to put the device in recovery mode (which i can't while I can't access the harddri've...)
Thank you anyway for your help...
You get into Recovery Mode by connecting the player to your PC while pressing and holding the Play button - it's not like the Hard Dri've players where you start the player in a certain way to access Rescue Mode on the player. The TX doesn't have a hard dri've only flash memory.
You need to install the drivers onto your PC first as they contain the Recovery Mode drivers.
PB

Muvo s200 says error in deleting files and won't for

My Muvo S200 is barely 4 months old. I was deleting an audio file within the player yesterday, then it said "Error in deleting!" (something like that). I plugged my player into the usb port of my pc, and the file I tried to delete wasn't there anymore. Funny thing is, when I was using my player after, the same file which I tried to delete was playing! Only the sounds were broken.
I tried to reformat the player, only it takes a really really long time (longer than the usual) and then stops and says it won't reformat. What should I do? Please help. Thanks!

dude try to update the firmware using this website under support/downloads
after you do that it will work again
it worked on mine ?

Errors transferring tracks to Zen X

Zen Xtra 60Gb Firmware .03.02 Mediasource 2.0.07
Windows XP sp2 IBM T30 Laptop using DeLock CardBus USB 2.0 PCMCIA Adapter
Hi, Brand new replacement ZenX and I have been able to transfer 87 out of 9800 tracks to it using the Audiosynch Wizard. every time it tries to write anymore tracks to the player I receive an error message saying "Player is either not connected or busy, please try again later" followed by " Unable to create file. Please restart player and try again."
The transfer icon on the ZenX stays in the "transferring" mode with the arrows dark. I have to disconnect the USB cable to enable me to to continue...but I still can't transfer any tracks.
I have moved the ZenX USB cable to the laptop's own USB .0 port, also removed the track it was trying to transfer ( in case it was corrupt ), also removed the idle timeout on the player and these made no difference.
So I deleted all tracks from the player and started again. This time it got to track 287 and stopped with the same error.
It also doesn't work in "Import Tracks".
I gave up and updated the software to MediaSource 2.03.29. this made no difference.
I really like this player but I am getting increasingly frustrated that I keep getting problems with it, seeing as it is a replacement for my first player which had the headphone socket problem. Please help.
Sven

Mbriles,
There are a couple of things to check in this case:
) Make sure that you have the latest drivers and firmware for the player installed. They can be found at http://us.creative.com/support/kb/article.asp?l=2&sid=4794
Jeremy

Strange error transferring songs to my Zen X

I have a 40GB Nomad Zen Xtra, with firmware .20.08.
Anyway, I can transfer my music just fine most of the time, but occasionally I get a strange error for some of the music, sometimes it can even be for a whole album. The error says,"Error: Unable to download file. This file format is invalid." But the format clearly says .mp3, so it's really confusing. Does anyone know why this is happening because now I'm having some of my favorite stuff held off of my player.

It might be a problem with the tags. Copy the file, use a tagging program to remove the tags from the copied file, then try transferring again.
Failing that make sure to get the latest drivers, firmware, MediaSource and MediaSource plugin from Nomadworld.com downloads.

Muvo² fm media error fixed

everytime i booted my muvo? fm 5 gb it automaticly went to the recovery mode and whatever i choose in the recovery mode it said: media error
pc wont even detect the player
but i fixed it (god tnx)
this is what i did:
i tried to format my muvo?fm 5 gb in the recovery mode but it freezed
i plugged the adapter in cuz the battery was low and i let the muvo? FM ''formatting'' the whole night!!
in the morning it was still ''formatting''
i unplugged the adapter, rebooted my muvo? FM and it said: firmware error..
after that the recovery mode came up
i ''deleted'' the firmware in the recovery mode,
formatted it in the recoovery mode,
plugged it to the pc, formatted the muvo? FM on the pc
reinstalled the firmware
and copied my music on it and it worked fine =D (WOOT)
now it works perfectly
i hope this works for you too guys
ps: try it at your own risk
Greetz, Coby
(srry for my bad english)

Thanks for letting us know. Media Error can indicate a damaged hard dri've, but it's useful to know a firmware update can also solve it.

Muvo V200 512MB randomly shuts d

Hi, I have a Muvo V200 52MB.
I usually have to try *many* times before it accepts to turn on. And when it does, it shuts down a few seconds later, randomly. It has an even greater chance of shutting down if I ever dare touching a button.
This is not a battery issue. Tried new batteries, no better luck.
I installed the drivers on my PC, I reflashed the firmware, tried last version, previous version, reformatted the dri've a few times, no better luck.
Any idea ?
Thanks

Well, i have the same problem as it has been mentioned here.i have a Muvo Tx USB 2.0 52 MB without radio.2 days ago when i was listening my mp3 player in the bathtube =), it shut down itself.i did not paid any attention at first but when tried to jump on the next song it again shut down itself.Now my player opens when i press any button once instead of pressing the /0 button a few seconds.And it shuts down when i press any button once a time as it behaves when opening.i cannot reach the menu or any other function. My player only plays the last song from eactly where it'shas been on the last opening. Cannot change it , or jump on to other songs. i had got another problem with it 3 months ago and downloaded NoMad Muvo Tx Firmware v..22.03.(When asking info about firmware, it shows its version as .0.5.675, NoMad Muvo Tx Firmware Download Application)This was a problem which my player did not work and when i had connected it to any PC with a winXP sp2 (both on russian and english) windows only launched the true "ini" files and recognized my player but could not display the player on "my computer". When i had tried to reach my player, windows displayed a message, "Critical I/O error, Couldnt retrieve device info.." The firmware update which i have mentioned above have helped me immediately as well i have no such problems again till the day before yesterday. Now, please what must i do with this buzzling problem Can anybody hear me

Error transferring files using MicroPhoto Media Explo

Hello, I'm having a very frustrating issue. I just had the hard dri've replaced on my MicroPhoto 8, and now when I try to add files using MicroPhoto Media Explorer (as I have for the last 8 months), I get the message "files not transferred; unknown error."? Likewise, when I try to use that same software to rip a cd directly to the player, it acts like it's working, then I get an error message. I know there are other ways to accomplish this, but since I'm starting from scratch, I'd rather use the method that I find to be the fastest and that I'm most familiar with. I've reloaded the software onto my PC, I've rebooted, reformatted, and updated the firmware on the player. Has anyone had this problem, or have any suggestions? Thanks!

Error which pops up : "The destination you have specified does not exist. Might be an offline network location or empty cd or dvd drive. Check location and try again"

CIF interface: Error transfering material plant

Hello Experts,
I am traying to transfer a material plant across CIF interface. The problem is, when I activate the integration model, it fails. The error message is exactly this: "Location does not exist for external location 1790 , type 1040, and BSG BS"
Any idea what the reson could be?
Many thanks
Aban

Hello Aparna,
I created a new IM and trying to CIF only location. But this time I get another error message complaing that location 1790 type 1002 already exists:
"Text: Location 1790 of type 1002 (BSG BSG1) already exist"
I checked the table /SAPAPO/LOC in APO and realized that location 1790 exists as type 1001. Now I changed it and would like to CIF it as type 1002.
How should I proceed if I change the location type from 1001 to 1002?
Another question: I tried to debug the CIF transfer by implementing an endlos loop in include "ZXCIFU08" (enhancement CIFLOC01) but this seems to have no effect. Is this the right enhancement (on ECC side)?
Thank you for your help
Aban

Error transferring datasource in R/3

Hello
I am trying to transfer a datasource from R/3 to BW.I am planning to transfer and then replicate
When i go in RSA5 in R/3 and when i select the source and then click on Transfer it gives me error.the error is "The datasource is not assigned to application component"
What does this mean and how to solve it

Hi Jack,
Look at the following post for more info:
Re: Technical Content Transport
Hope this helps...

Error transferring file to target

when i open vision assistant and i chose an colomatching pattern and set it from a sample on my computer and i click on finish NI VISION ASSISTANT show me this
and if i set the admin password of myrio that is the same with i login on the browser panel it told me this
what should i do?

thanks for your reply i find two error that vision assistant doesnt told me the error is this
and after this he also told me this
i think the second depends from the first but i dont understand why

Help!! Creative Zen Nano 512MB Error When trying to download some so

When I first started using it, it worked perfectly fine. It downloaded everything I wanted with no problem. I deleted everything I downloaded to put some things on their to give to someone else and an Error message came up. The thing that is strange is that it may download one or two songs from the same Cd that I ripped but not the others that I wanted.
If anyone could help me, I would greatly appreciate it. Thanks!!

Hi?I've had the same problem on my nano. I thought that it was because I later purchased a Zen Micro and installed the software on the same PC. and the two softwares clashed somehow. Your experience suggests this may not be the case. I'm not experienced with this stuff so my suggestion solution is a bit drastic. Basically I erased every? creative software and MP3 track off my pc and started again. It seems to be working fine so far. BTW I dumped the Micro and only use the Nano and its software on my PC. But then again it could just be that there is an error on those tracks, try it on another machine and see if the problem duplicates.

Error Transfering Catalog

HI SRM GURUS
we are adding products(product categories) to the shopping cart from the catalog,
but it is showing that unit could not be determined i.e
00001 E BBPWS Unit was not transferred. Not possible to determine unit

Hi Kumar,
Make sure that all the Units of Measurement have the corresponding ISO Code.
SPRO->SAP Web Application Server->General Settings->Check Units of Measurement
I hope this helps you.
José Luis D

MuVo TX 512MB - Error Transferring Fi

Similar Messages

Maybe you are looking for