Muvo TX FM - garbled au

This is weird. When I load audio files (MP3) on the MuVo TX FM (G), they sound fine. But eventually, perhaps an hour later, they all sound garbled, like underwater. If I delete the contents of the player (have tried reformatting), and reload songs - they sound fine again - but just for a little while! Then they sound garbed again. Any suggestions?
Thanks, Kyle

Try reloading the firmware.
PB

Similar Messages

MUVO SLIM 1 GB with firmware 1.13.02 garbled so

Hi,
Since a couple of months I have the following problem
After I have downloaded several times music to my player I get all of a sudden garbled sound. The other day I was listening to a podcast and turned it off. Then when turning it back on the again ( hour later ) the podcast was completely not understandable.From now on all other songs sounded weired as well.(metal sound ) Even erasing all songs and putting new ones had the same effect. The only thing left to do is to re-firmware the Muvo Slim again, then everything works normal again ( for some weeks )
I have also tried :
- not to upload the firmware , but just formatting the dri've in FAT or FAT32 , but this doesn't help.
- remove the battery for some time
- no mix of WMA and MP3 songs on the player
when listening to the mp3's that are on the MUVO player via the pc ( thus via the removable dri've) , there is no corruption in the files.Everything seems to be perfect.
So the usb flash dri've has no corruption.
The playrate seems to be ok , but the sound seems hardly recognizable.
I have tried to find something to reset my Muvo (instead of reimage ), but have found anything yet.
Please help.

Well, as I have said ,the problem seems to go away after I have done the firmware update again.But after a while the problem start again with no apparent reason
I always download the firmware from the creative website.
so at least I'm sure the firmware file I have is not corrupt.

MuVo N200 problem with playba

I have an older MuVo N200. I have transferred some of my class notes to it and it had done just fine so I transferred some musice to it as well. It played back very well for about 2 days and now it is just a high pitch squelling:angry:. I have lost some of the songs that my daughter has sung because it has garbled and destroyed them ? Any way I would just like to know what is going on. I have deleted the music and?transferred it again and it works just like it is supposed to and the play back will be fine the first time around then... sounds that remind me of really, really bad radio station static. Any ideas? Help is appreciated.

I suggest reloading the firmware. This will also reformat the player, so everything stored on the player will be lost. Make sure you have copies on your pc first. Search the forum for detailed instructions about how to reload the firmware.

MuVo Slim transfer er

Hi. I'm frustrated with the tech support I'm getting in email, so hopefully somebody here can help me. I had songs on my slim and everything was working fine until all of a sudden, I started getting this error message. It says: error tranferring file. There is an option at the bottom not to show this message for all other transfers, and a countdown at the top that automatically closes the window in a few seconds.
Tech support said to d/l the new firmware, so I saved all my songs (I'm in Creative media source, by the way), and did the firmware. Now I get the same error when I try to put all the old songs back on there. Tech's next email gave instuctions on how to reformat, but I got stuck in the middle because they gave me instructions for the wrong player! Next email said: "Here are the steps to format your player. It is not necessary to do the format now yet." Huh? Since I didn't know what else to do, I went ahead and tried to follow these steps:
- remove the battery from muvo slim- connect the player via the cable to the usb port of system.- Open the device manager- Is there a recovery device class appearing in device manager?- Next update the latest firmware and follow onscreen instructions. (Ensure format data area is checked)
What is a device manager? Does any of this make sense? I'm running Windows 98.

Yes, I tried reformatting. That's where I got stuck on where the device manager is. The last person told me how to find it (thank you, by the way), but the next step said "is there a recovery device class appearing in device manager?" And there's not.
I asked tech support the same questions I posted here, and more, but they are giving me really confusing and garbled up info. Yes, I know they're trying their best, but I'm still frustrated. This is how they answered the same questions I posted here:
The other Options listed are Firmware update.Up-to-date firmware are equipped with fixes or additional features and we can also determine whether there is any problem with the current firmware on playerAnd the Setup of the Creative Player Bundled Software Creative MediaSource. For Transferring and Playback and Ripping of Song Tracks.Please also note that for any drm protected files, they have to be transferred over using theMediaSource program, due to the license issue.Your valuable feedback and understanding have been highly appreciated.
That did not answer one of my questions, and didn't make much sense. I know what I need to do is call and speak to a human being, but their hours are inconvenient with my work schedule.

Iphone 5s voice garbled, breaking up

People I call on my iPhone 5s say my voice sounds garbled and is breaking up. Is it a hardware issue?

I am getting the same complaints from people I talk to on the phone. I started keeping track of when it was happening. The only common factor that I can find is that all complaints are happening when I am talking to someone while I am in a loud environment.
I tuned off the "Phone Noise Cancelation" feature about a week ago and I have not had any complaints since. You can find this feature in the settings icon then go to General then look for Accessibility. The Phone Noise Cancelation option is about half way down the page under accessibility.
I hope this helps!

Some songs in library and on itunes store sound garbled

Hi,
When I play certain songs that I previously purchased through iTunes or when trying to listen to some song fragments in the iTunes store, they sound really garbled or don't play at all...other songs are fine.
I'm using iTunes 9 on a new computer with Vista...but had the same problems with iTunes 8.2.
Any ideas?
Thanks!

I assume that the songs with this error have a "!" in front of them? If so, this usually happens when the iTunes music folder is moved or manipulated in some manner. Did you do anything with the iTunes music folder such as change its drive location?

IPhone 6 - people can't hear me; garbled; breaking up

Has anyone else had problems with the iPhone 6, where people on the other end can't hear you? They say I'm garbled and breaking up. I can hear them fine. Love everything about the iPhone 6 EXCEPT using it as a PHONE!!!

Hi has anybody had any resolution to this problem? I've already swapped out my new iPhone 6 for a new one due to people not being able to hear me (breaking up, garbled) when I use the phone in my house. The new phone is doing the same thing! So frustrating. Was on with support for 2 hours yesterday trying everything. We did the ATT carrier update and it seemed the issue was fixed. Very next phone call the call started out fine then after one minute the caller was telling me they couldn't hear me that I was breaking up. So annoying. Others in my house have iphone 4 & 5 and they work perfectly fine only the 6 has this issue.

Converting garbled characters for JAPANESE characters in a custom table

Hi all,
I have a custom table that store Japanese characters.
After my company has upgraded to ECC6.0, this data in the custom table has become garbled and its alot of it garbled.
Is there any SAP tool that can I use to make the correction on those garbled Japanese characters?
Thanks,
William Wilstroth

Hi Nils,
I really really really had a field day reading and testing around UC... To my dissappointment, I do not have the authorization to use SUMG and SCP too as well as a few of the TCODES...
I finally told my higher level technical mgnt. that this table might need some changes...
Has this problem of mine got anything to do with MDMP since its no longer supported in ECC6 and I found one coding that search for MDMP in RSVTPROT...
My colleagues suggest that the data be corrected from table DBTABLOG... which i find, in my opinion, is not the right way...
Thanks,
William

MuVo does not show up in "My Comput

I have an Emachines 2.92 ghz system with 024 ram running Windows XP and I do have Adminstrati've rights. I installed the software on my computer as instructed. When I rebooted and then attached the Muvo txfm to my usb port. The Muvo screen shows the moving USB icon as pictured in the instruction manual but it was NOT recognized in "My Computer".
There was something under "Control Panel" called Muvo system folder I think and when I clicked that, it said there was no dri've connected and that I should connect the dri've to the USB port. But it already was connected. I tried another USB port but the system would not recognize it from there either. It is listed in Device manager under dri'ves and there is no question mark or exclaimation mark there or anywhere in Device Mgr. but when I select the dri've to go into "Properties" the computer freezes for about 20 seconds. Then properties opens up and it says "there is no problem with this device." A window came up in my taskbar saying there was a problem with hardware installation so the device may not work properly. I disconnected all usb devices and connected the Muvo again but it doesn't show up. Then I rebooted, attached the device again but still the same problem. Then I unistalled the software and attached the device to the USB port and a window came up saying the hardware was installed and the device was now ready for use but it still is not in "MY Computer" so I am unable to access the device to do anything with it. It is in Device Mgr as "disk dri've" now. Then I deleted the device from Device Mgr and rebooted. I installed the driver update called "MStorage_PCDRV_LB__07_00_250.exe" from your website and then plugged the Muvo into the USB port again and it showed up there as Muvo TXFM but still not in My Computer listing.
I tried to install the Firmware update from your website called: "MuVoTXFM_PCFW_LF__9_0.exe" but because the Muvo doesn't show up in "MY computer" it is unable to find the device and it just hangs as it looks for the device.
OK, now I'm thinking the Muvo is a defecti've player so I plugged it into my 998 Dell computer running Windows Me. with no software installation at all and it showed up in "My Computer" in a matter of seconds. I even put a song on it from the Dell computer. So wassup?
Thanks for your help
P.S. I also did these two registry fixes allowing permissions on both (but they were already set to that anyhow) so it did not fix it:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\U SB
And also I downloaded and installed the three microsoft fixes I found on one of the many posts I read on this forum for media player and something else. I cant remember what, I am just so exhausted!

Connect your player and find its entry in Device Manager. Click on Remove then disconnect player. Also select Show Hidden Devices and remove any extra entries for your player.
Go to Control Panel, Add/Remove Programs and remove the MuVo drivers, Mediasource and Media Explorer software.
Reboot PC and then re-connect player - it should be detected immediately by XP.
Another thing it might be is if you are using a front-mounted USB port on your PC - these don't always supply enough current. They allow the player to be seen but not enough to actually do anything with it.
If you choose View Devices by Connection in Device Manager with the player connected and drill down to find the entry for your player, you can look at the properties for the controller and hub that it is connected to. One of these shows the current equired and the current available.
PB

Text messages in Safari are garbled on Mac Pro after Snow Leopard install

When reading or composing my Yahoo mail text messages in Safari on my Mac Pro after Snow Leopard, the wording is very garbled. Looks like o's, s's, c's, some caps, with lots of spaces intermixed. Messages look ok on Firefox, on same machine. New messages and reading sent messages look ok on my MacBook and MB Air. When cutting and pasting into something else (like this window), the text looks fine. I can compose and send messages that look garbled, but the right words and letters go out. HTML messages look ok. Any clues for solution?

I have this happening in bunch of different HTML pages. Here's a screenshot of the same page in Safari (Version 4.0.3 (6531.9)) and Mac OS X 1.6.1 side by side with Camino:
https://dl.getdropbox.com/u/362958/miscwebimages/Screen%20shot%202009-09-22%20at%2018.35.47.png
Camino renders the page correctly. Safari is really unusable with this problem. Tried switching to and from 64-bit mode in Safari, didn't help either.
Message was edited by: Attila Szegedi

Having a Problem with WMA DRM and Muvo TX FM - Upd

No elapsed time problem with WMA DRM or other protected files from:
Napster
WalMart
Audible.com.
Elapsed time problem with WMA DRM from:
Netlibrary.com
This is an update on the problem that I described below:
Windows Media Player
One problem I had was that Windows Media Player would not recognize my muvo players. It turned out that because I was using a USB hub for the players to connect WMP was not recognizing the players. When I used a direct line to the USB port on the computer, WMP has no problem recognizing the player.
Digital License.
As a test, I bought a WMA song file from WalMart to see if its Digital Rights Management was compatible with Muvo. There was no problem with the correct elapsed time showing. I will also test a file from Napster and add its license details here.
Here is something else I noticed - the differences in
the license for the two types of WMA files:
The one from WalMart - which works fine with the
elapsed time on the MuVo:
This file can be played an unlimited number of times
Collaborati've play for this file is not allowed
This file can be burned 0 more times<<<
This file can be synchronized an unlimited number of
times
The license for this file can be backed up <<<
For the one from netlibrary.com
This file can be played until 4/9/2005
Collaborati've play for this file is not allowed
This file cannot be burned
This file can be synchronized 3 more times until
4/9/2005
The license for this file cannot be backed up<<<<
I have been able to copy WMA with DRM audiobook files to my TX FM, but the elapsed time doesn't change with either play or fast forward. The file is from Netlibrary.com which supplies audiobooks to public libraries. The file plays, but the display stays all zeroes.
I have been sending information and getting replies and suggestions from both Netlibrary support and Creative technical support with no solution. I have the latest firmware and everything else. I have the problem on both Windows XP and Windows 2000 computers. I have downloaded several files, but none of them show elapsed time. I suspect it is something to do with the DRM, because I can play a preview file from Netlibrary - without DRM - with no problem. I also have no problem with other files copied over - from Audible, from CDs, etc.Message Edited by alex20850 on 03-30-2005 07:54 PMMessage Edited by alex20850 on 03-30-2005 08:4 PM

I'm primarily using my TX FM for netlibrary.com audiobooks and also get all zeros on the display.
I've been steadily complaining to netlibrary and my local library about problems/inconveniences, itcertainly is experiencing growing pains; we're the ones getting the pain, though!
I'll post here if I find a (legal) resolution to this.
What firmware version do you have? I have .2.04 and I see that .3.03 is available for download. I've read here that there are problems with .3 with volume limiting and I'm hesitant to change. I do notice that one of the listed fixes is:
Updates the elapsed time displayed during navigation within a long recorded track
so, maybe this is the answer?
Dr Dave

MacBook Pro to TV via VGA to Components gives garbled image

Hello everyone,
I'm the proud owner of a new unibody MacBook Pro and so far I'm loving it. There is, however, one problem. I would really like to connect the MBP to my HD TV, which happens to be a Sony FD Trinitron WEGA. At first I bought the Apple mini-DisplayPort to DVI and DVI to Video cables. It turned out the mini-DisplayPort to DVI was DVI-D and the DVI to Video was DVI-I.
I returned it and bought the mini-DisplayPort to VGA and a VGA to Components cable. When I finally got the Mac to recognize the TV, I got the garbled image with horizontal purple lines (see links to photos below). I tried every resolution from 800x600 to 1280x1024 with various refresh rates, but nothing helped. Does anyone have any idea why that might be happening? Thank you in advance.

Hi BSteely,
Thank you again for your response. I tried to get the the TV to work with Windows, but I couldn't get the nVidia driver to output to Components. I've considered the box option, but to be honest I'd probably just get an Apple TV instead. I do want to try one more things though, do you think a VGA to S Video cable will work?
I think I'm going to call Apple support (since I still have access) and ask them how they would solve this problem. Clearly Apple has forgotten about the people who want to connect their laptops to TVs that didn't just come off the production line. One of the reasons I got the laptop was so I could watch iTunes content on the TV....
Thanks again for your help.

Since 10.5.6 upgrade, email messages are garbled text

Hi,
This problem seems to have started with the latest upgrade. My email messages are coming in with garbled text. This happens in my Yahoo account where I will go to the mail website and the text there will be fine. It's only in the mail program.
Thanks in advance,
Pete.

Hi,
I have the same issue.
Although the mails seems to have been downloaded correctly parts of the parts of the message mime information is displayed as part of the mail body.
The only thing that helps is to rebuild the index of the specific mailbox (inbox in my case).
BTW: Mail of iPhone OS does NOT have this problem. Generally it handles mails MUCH better than the real OS X. Strange, isn't it.

HP dv6662se microphone garbled after upgrading to Windows 7

I recently upgraded my dv6662se laptop to Windows 7 (32 bit) from Vista. It has the built in webcam and microphone. I also downloaded all of the subsequent Windows updates for it. The webcam still works but now the microphone only produces garbled noise. The microphone worked okay before the upgrade. The built-in speakers seem to be working okay.
The internal microphone appears to have the latest driver (6.0.1.5869) that is available for it.
I've been hesitant to uninstall the driver since I have not been able to find that driver anywhere. All I can find is what I believe was an older one (6.0.1.5448 A) that is a Vista driver. I also have seen where Realtek just released a new driver (R2.47) on 4/9/10 but haven't heard whether that will solve the problem or not.
I first discovered this problem the first time I tried to Skype someone after the upgrade. When I check the microphone using Skype's Audio settings, I can see that the microphone is responding to my voice. When I make a test call to Skype, it is all garbled.
I have not torn into the laptop yet to see if I can find which Realtek chipset it is using.
I was shocked to learn that this 2 year old laptop is no longer being supported by HP.
I'll appreciate any help anyone can provide. I'd rather not have to install an external microphone.

Unplug the printer, and uninstall it. Then download the Windows 7 CP1215 plug and play driver package from www.hp.com. Install the printer using that package.
Although I am an HP employee, I am speaking for myself and not for HP.

MacBook Pro 17inch - mid-2010 - screen graphics garbled

So my screen goes garbled and I have to either turn it off and back on OR (strangely enough) drag one of the application windows around the screen like a dry eraser on a white board - for a while, there's a graphic echo, creating a cool pattern of images of the app window all over the screen, then it eventually starts to act like a dry eraser, cleaning off the 'echoes' and causing the screen to appear as normal.
So I've seen this discussion before and seen people offer a variety of solutions. Some say it's hardware, and suggest replacing the NVIDIA card, others say try command+option+p+r. Some say it's RAM - I've noticed it does occur more often when my RAM useage is peaking (whilst watching the Activity monitor), but it doesn't always happen like that! I have 8Gb of RAM installed, so not sure how it can happen - anything more than 5 or 6 tabs open on Safari PLUS having Skype open, and the system goes crazy! Whilst the machine is registering 8GB, could it be possible one or both of the 4 GB cards are corrupt?
I've had the logic board replaced, and the screen replaced. Haven't tried replacing the NVidia card yet.
Have used Apple for ages but not really a techie, so not sure what info to provide to you awesome tech-heads. I"ve attached some screen-captures ...
HELP!!!!!!!!!!!!!!!!!!!!

thenzguitarman wrote:
could it be possible one or both of the 4 GB cards are corrupt?
I've had the logic board replaced, and the screen replaced. Haven't tried replacing the NVidia card yet.
That is strange indeed. Yes, RAM could be at issue. If this is not the original RAM, install it. If it is, remove one module, try running; switch that same module to the other slot, try running; repeat with other module.
The GPU cannot be replaced. It's soldered onto the logic board; thus, if you've had you logic board replaced, the GPU was replaced.

Muvo TX FM - garbled au

Similar Messages

Maybe you are looking for