Muvo TX FM took a dive to pavement, now it wont turn on. HE

Yeah so it took a pretty good hit to the pavement the other night and now it wont turn on.
Everything still works as far as connecting it to the computer, adding/deleting files, etc.. but it will not turn on to listen to anything.....
is there anything i can do or try?
i opened it up and nothing was broken, not there are many parts inside to see damage

If it doesn't switch on then it could be the Play button itself. To test this try connecting the player to your PC in Recovery Mode - load the drivers first, then press and hold the Play button while connecting it to your PC. Keep holding the Play button until the New Hardware Wizard starts - if it does then you have confirmed that the Play button is working so it's up to you whether you continue with installing the Recovery Mode drivers.
If the player just connects as normal then it could be the button that's faulty.
PB

Similar Messages

  • HT4993 i took my sim card out now it wont turn on what can i do i didnt get the apple care

    i took my sim card out my sprint iphone 5 now it wont turn back on

    You iPhone 5 has a full 1 year Warranty with Apple, whether you have AppleCare or not. To turn iPhone ON, connect to Wall Charger for 10 minutes, iPhone may turn ON itself. If still OFF, keep on charger and Reset, hold both home and power buttons until the iPhone begins to start. This can take about 20 seconds of holding both buttons while on charger. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution under Warranty.

  • Hi i did an update on my iPod touch i took it uot i played on it for a few minutes i then licked the screen and i wanted to unlick it but it just flashed and now it wont turn on

    i am terribly confused i did an update on my ipod touch i took it out of my usb port i played on it 4 a bit i locked the screen and i wanted to unlock it when it flashed and now it wont turn on !!

    - See if resetting the iod helps.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next, connect the iPod to its syncing computer and if iTunes sees the iPod restore the iPo via iTunes.
    - If iTynes does not see the iPod, place the iPOd in recovery mode and then try restoring the iPOd.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I have an old iphone 4 that is broken and i would like to get it replaced. i opened the back of the phone and took it apart and now it wont turn on. would i still be able to get it replaced?

    I got my phone last may and then i had another upgrade this past december. I completely broke the old iphone 4, but it has more space on it for movies and such so i would like to get it replaced. would i still be able to get it replaced even though it is broken and all the pieces were taken out of it?

    No. Once you or any other unauthorized person opens/disassembles the iPhone, Apple will no longer touch it.
    Regards.

  • I took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer. how do i get it to finish updating or turn on?

    i took my phone off the charger and wifi while it was updating and now it wont let me on the phone nor my computer and it just has the apple icon on the screen. how do i get it to finish updating or turn on?

    Why would you do that when your phone is updating?
    Your phone is in recovery mode If you can't update or restore your iOS device

  • Accidentally took off quick time player and Itunes wont open now

    so I have a pentium 3 windows 2000 IBM laptop
    terrible i know
    i was trying to get more memory onto my computer by deleting programs i didnt need and a supposed "computer wiz" told me that i didnt need quick time player to run Itunes.
    so i took it off and now Itunes wont even open. a message pops up saying that i need to reinstall Itunes
    because i have such an old computer (and buying a new one isnt an option right now) the newest version of quick time player isnt compatible with my computer
    i tried downloading an older version of quicktime and that hasnt worked either
    so my fear is that if i unistall and then reinstall Itunes that
    a) i will lose all my music
    and
    b) there wont be a version of Itunes i can download since i have such an old computer
    any ideas or suggests?

    Uninstalling the iTunes program should not affect your music folder however to be sure nothing goes wrong you should backup you music before starting. You might also want to have a look at this page, it refers to XP but you should be able to adapt it to 2000: Removing iTunes, QuickTime, and other software components
    You can get the highest version of iTunes that will work with Windows 2000 at this link: iTunes 7.3.2 for Windows 2000

  • Just took my iPod classic 160GB out of box turned it on and accidently hit clickwheel or button and eveything is in language other than english.  How do I get it back to english without being able to read symbols.

    just took my iPod classic 160GB out of box, turned it on and accidentially hit a button changing the language from english to something else (chinese or japanese).  All I see now is symbols.  How do I turn it back to english without knowing what any of these symbols mean.  I started clicking buttons and click wheel and can't seem to get to any section with various language options.  Please some help me get it back to english.

    There are two options. The first is to learn whatever language you have it set to, the second is to find someone else with an iPod Classic and read the English menu and follow it in your iPod. I also believe you may be able to set language perfunces from within iTunes while the iPod is docked, providing they are in English.

  • I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups.

    I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups. Why? Please help

    http://pondini.org/TM/FAQ.html

  • So last night before i went to bed my iphone 4 was charging and it was at 6%.the next morning i woke up the phone said it had still been charging but was still at 6%. so i took it off and it died.now it wont come on.it keeps saying the charging sign

    So last night before i went to bed my iphone 4 was charging and it was at 6%.the next morning i woke up the phone said it had still been charging but was still at 6%. so i took it off and it died.now it wont come on.it keeps saying the charging sign. i tried rebooting and the charging sign just shows up. how can i fix it?

    sounds like a hardware issue with the battery
    1. you can try different chargers if you have any
    2. while plugged in, Hold the Home+Power at the same time for about 20 secs, if the apple comes up then release both buttons
    3.if that doesn't work you may have to go into Apple store

  • Took phone update and now can't turn down volume all the way?

    I took the latest phone system software update, and now when I turn down the volume (using the volume button on the side) the lowest it will go is vibrate instead of silent.  This is annoying, because I sometimes like to turn it all the way down in meetings or when I sleep at night, but it vibrates on incoming calls or corporate e-mail notifications.
    Why did you guys do away with the fully-minimized volume choice?
    The Motorola Droid (Droid 1, I suppose), under the original software load, allowed you to turn down volume (in some number of steps), down to Vibrate, and then finally all the way Off.  The only sound it would make would be if you set an alarm clock.
    With the new load, turning it down only goes to vibrate, and not silent.
    The "Silent Mode" available when pressing the power button should be more appropriately named "Vibrate Mode."  It appears that there is no longer a true "silent" mode under the Droid O/S.
    I looked at a number of marketplace apps, but they all seem to be based on a timer setting, i.e.  set a time frame that you don't want any sounds.
    Why did Verizon (or is it Google?) have to break something that didn't need fixing?

    It's a known issue and has been discussed numerous times. If you need quick access, you can get beautiful silent from the market for free which will allow you have a widget on your homescreen for silent mode.

  • I had my iphone 5c in my lifeproof case in the water and when i took my phone out there was a few drops on it but i didnt worry about it, but now it wont charge at all except to 4% and then it stops and ive had it in rice for 8 days........WHAT DO I DO

    i had my iphone 5c in my lifeproof case in the water and when i took my phone out there was a few drops on it but i didnt worry about it, but now it wont charge at all except to 4% and then it stops and ive had it in rice for 8 days........WHAT DO I DO

    It sounds like the LifeProof case may have leaked.  Did you pay for the Waterproof protection?  If so, you can file a claim with lifeproof, pay the deductable, and get a replacement.
    If you didn't purchase the Waterproof guarantee, if you have Applecare Plus, $79.00 will get you a replacement.  If you don't have AppleCare Plus, then this is a $269.00 replacement lesson.

  • Compressor took a dive

    Both Compressor and Live Type no longer work on fcp 4.5
    Any ideas?

    How did you downgrade? Use Pacifist to remove QT, then install older version, or was that OS reinstall a nice clean fresh start? It should be a nice clean fresh start.
    Shane

  • IPad took a dive, glass shattered, looking for some repair recommendations

    My daughter's iPad 3 landed face down last night and shattered the glass.  It still functions properly, so I know it needs only the glass replaced and not the LCD.  I found 4 companies which look like reasonable candidates (actually I got them from another ASC thread...)
    http://www.repairzoom.com ~$120
    http://www.imobilerescue.com ~$166
    http://www.i99repair.com ~101
    http://www.iheartrepair.com ~$145
    Does anybody here have any experience with these places and willing to give a recommendation?  A warning?  A recommendation of another place?
    The most expensive place makes a big deal about how they use OEM glass -- and I would be willing to pay more for that if I heard a strong argument from folks here.  The other places claim top quality parts, but not OEM parts.  Any thoughts?

    If you comfortable using a screen protector and the iPad works fine that way, then that sounds like the least expensive option at this time.  Eventually you will want a new iPad anyway.
    Be sure to keep an up to date backup of the content, either on your computer or in iCloud...a device with a broken screen can suddenly stop working.  Keep it up to date so you don't lose your content.
    A third-party, nonApple authorized service may do just as good repair work...but, again, the down side is loss of support from Apple if anything else goes wrong.
    If you buy off eBay, be VERY cautious...there have been a number of users lately asking what to do with a purchase they cannot activate...an iOS 7 device with Find My turned on cannot be reset to factory condition without the user's Apple ID and password...not even Apple can help with it.  So be absolutely sure you are buying a device that is clean and you can use.
    Best of luck to you, and Happy New Year.

  • IPhoto took a dive, photos gone? not indexed...some come up as icons? HELP

    Completely frustrated. My battery ran out as Iphoto was downloading from my camera. Result? My photos are no longer indexed and worse, it looks like some have been changed to ICONS? How is this possible? It is a mess. Help!

    Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Select the options identified in the screenshot. 
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    Download iPhoto Library Manager and launch.
    Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
    Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
    In the next  window name the new library and select the location you want it to be placed.
    Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    Was it the camera battery or the laptop battery? If it was the camera battery it is one of the prime reasons many recommend using a card reader to upload the photos from a camera.
    OT

  • My new iphone 4  wont power on does the battery have to charge first? It was shipped thru mail and took 7days to get here.I managed to turn it on once and shut it of because i had to put sim card in.Now it wont power on.

    I tried holding down both buttons like everyone said and this doesnt work. My phone was shipped new from Ontario to Sask and took about a week to get here,Could it be because my battery is so low? And shouldnt it power on when it's plugged in or show a phone charging icon or have some lite on? My laptop won't even discover it when I plug it in. When I first took it out of the box i called virgin mobile.The lady told me to put sim card in because it did turn on at first and was asking for sim card so i put it in and all kinds of languages were displayed so i clicked on english and then then somehow shut the phone off because i wasnt familiar with it yet i have no idea how i shut it off.Anyway, I read a bit further and saw where the power button was and tried to turn it back on. No luck the apple logo appears with what looks like a hairline crack on the apple itself and a very thin blue bar no thicker than a pen stroke its about halfway right behind the apple logo like its going to power on but it doesnt, it just goes black.Then when I hold the 2 buttons down, the home button and the power button at the same time, the apple logo flahes on about every 3or4 seconds as tho its going to turn on but it doesnt, occasionally the bar comes up with the logo but not every time.What can I do? Will it work if I let it charge for a couple hours? Does it need a couple hrs and shud there at least be a charging icon showing me its charging?? I have it hooked up by USB to my laptop charging.My computer and Itunes doesnt even acknowledge its even there. PLEASE HELP? Thanks so much!

    Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
    Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
    Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Maybe you are looking for

  • Upgrade 10 databases at a time without OEM

    Hi, I have ten databases in 10.2.0.2. standard edition on Linux platform. I want to upgrade all of them to 10.2.0.4 without using OEM. Is there any simple way to upgrade all of them to 10.2.0.4 instead of login to each and every server and upgrade. T

  • Can't install software on my Mac OS X 10.9.4

    Hello everyone, I seem to have a problem installing new software... For some reason I can't install anything, the installer opens and I follow every step, but in the installation step, the bar just keeps moving but never actually moves as in completi

  • Help: Copy text from PDF to AI or MS Word

    Hello, I'm new to this boards so, if topics like this were brought up I'm sorry and be glad, if someone can redirect me to it. I've also searched for solution throu google and did not find anything that would fix this so I came here as my last option

  • Mail not working outside of the US

    Why was I unable to send or receive email using the Apple Mail app on my iPhone and iPad (both had iOS 8.1.2) when traveling outside the US last week? The email accounts were functioning fine with Mail within the US. I was connected to secure WiFi ne

  • FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-01422

    when i am searching AR module and Receivables - > Transactions - > Transactions i am getting this FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-01422. what to do?