MUVO TX SE 1go : last firmware K

i download the last firmeware MuVoTX_PCFW_LB__0_05.exe
now my player is dead, i try to restore the firmeware
with MStorage_PCDRV_LB__07_00_250.exe but it doesn't work to.
My player is no more recognise. i try also the driver for FM :
MuVoTXFM_PCFW_LF__9_0.exe does not work to ..
Ne pas t?l?charger le dernier Firmware MuVoTX_PCFW_LB__0_05.exe
qui fait planter votre lecteur MP3.C'est vraiment la merde !
je suis vraiment d?gout? la ...
Il sera dead meme apr?s restore de celui ci ...
If someone can help me !

yes , i tried already .
MStorage_PCDRV_LB__07_00_250.exe
and the battery is always removed with this mp3 player.
this is like a USB key, there is no battery when plug on the Computer
. Unplug the player from a computer if it is plugged
2. Install the latest driver if you have not done so. If you have a Creative MuVo, MuVo USB2.0, MuVo TX FM, MuVo N200, MuVo V200, Zen Nano, Zen Neeon or Zen Nano Plus player, you can download the file MStorage_PCDRV_LB__07_00_250.exe.
3. Remove the battery from the player (except Zen Zeeon which has a built-in battery).
4. Press and hold the Play button while connecting the player to the USB port.
5. Continue to hold the Play button for about 0 seconds after connecting your player is connected to the USB port.
6. When the Find New Hardware dialog box appears on your computer screen, release the Play button.
7. If this is the first time a player is installed as Player Recovery Device, Windows will find a Player Recovery Device (or USB Device), and prompt you for drivers. Click on No, and select "Do not search. I will choose the driver to install". Windows will install the drivers automatically.
8. Once it is installed, you can then update the player's firmware.

Similar Messages

My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not workin

My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Setting>:General>Reset>Reset Network Settings.
- iOS: Troubleshooting Wi-Fi networks and connections

What was the last firmware version for the Zen Micro before M

I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
Please make sure you are 00% on this.
Thankyou.

I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

Any fix for MacPro Fan problem caused by the last firmware update?

Hi,
My macPro's fans have been going balistic on restart from sleep mode ever since I loaded that last firmware update that was supposed to address the MacPro fan control.
Any word on a fix... Is this overspeed damaging my hardware?

It is a bug in the firmware update because my MacPro never acted this way before the update was loaded...
Many have reported the problem... and some have not experienced it... Go figure.
Logic says this is not a bug. A bug with the firmware update would be universally felt, no exceptions. Firmware doesn't change its format out of the blue when it chooses to. What it does say is there are some Mac Pros that for whatever reason are not getting sufficient cooling in their position on the desk/floor, or the climate they are being used in. Since Apple does not publish the temperature limits internally for its machine, the best thing is to report this problem to AppleCare, even if the hardware test comes out negative.

Will there be a last Firmware for RV220W

Hello,
will there be a last Firmware for the RV220W after the end of sales announcement?
Regards
Timo Ostendarp

Hello, tostendarp.
It is very unlikely that a Cisco device (like an RV220W) to get Firmware updates if there is already an End of Life/End of Sale announcement. Is this for your existing RV220W, by the way?
Let me know if you have additional concerns or e-mail ([email protected]) me directly. Kind regards.

Report bug in last firmware nokia 130 and 130 dual...

report bug in last firmware nokia 130 and 130 dual sim rm-1037 and rm-1035.
Bug is when you choose phone book and the phone freezes on the menu and after 1 minute menu works but the second attempt to open the phone book phone freezes again. problem is present in the last firmware. I hope that the problem will be eliminated in the next firmware.
I tried also with Nokia Software Recovery Tool but without success, the phone still freezes when opening the phonebook.

1. Country Bulgaria
2. Try with three sim cards three different operators in Bulgaria, Mtel, Globul and Vivacom.
3. 100% of the problem is not in the SIM card, the problem is a bug in the software of nokia 130 and 130 dual.

When updating to ios 7, my airport does not function in my ipad and iphone. No icon appears...I´ve check I´ve got last firmware on aiport utility, and also I´ve restart both devices... thanks for your support..

HI!, When updating to ios 7, my airport does not function in my ipad and iphone. No icon appears ...I´ve check I´ve got last firmware on aiport utility, and also I´ve restart both devices... buth still not working

Restart your AirPort Base Station or other router if that's what you have. Unplug it and allow a moment or two for it to reset before plugging it back in again.
If that does not work, try resetting your network settings: on the iPad and iPhone, tap Settings > Wi-Fi, select your network then "Forget this Network". Select the network again, provide its password, and verify you can connect.
If that does not work, Settings > General > Reset > Reset Network Settings. Select your network again as above.
If that does not work, "hard reset" your AirPort Base Station, assuming you are using one and not some third party product. You will need to reconfigure it using AirPort Utility.

MUVO SLIM 1 GB with firmware 1.13.02 garbled so

Hi,
Since a couple of months I have the following problem
After I have downloaded several times music to my player I get all of a sudden garbled sound. The other day I was listening to a podcast and turned it off. Then when turning it back on the again ( hour later ) the podcast was completely not understandable.From now on all other songs sounded weired as well.(metal sound ) Even erasing all songs and putting new ones had the same effect. The only thing left to do is to re-firmware the Muvo Slim again, then everything works normal again ( for some weeks )
I have also tried :
- not to upload the firmware , but just formatting the dri've in FAT or FAT32 , but this doesn't help.
- remove the battery for some time
- no mix of WMA and MP3 songs on the player
when listening to the mp3's that are on the MUVO player via the pc ( thus via the removable dri've) , there is no corruption in the files.Everything seems to be perfect.
So the usb flash dri've has no corruption.
The playrate seems to be ok , but the sound seems hardly recognizable.
I have tried to find something to reset my Muvo (instead of reimage ), but have found anything yet.
Please help.

Well, as I have said ,the problem seems to go away after I have done the firmware update again.But after a while the problem start again with no apparent reason
I always download the firmware from the creative website.
so at least I'm sure the firmware file I have is not corrupt.

Problem with Muvo FM TX after upgrading firmware to 1.19

My GB Muvo FM TX had been working fine, but I saw the new firmware and decided to give it a try anyway. I upgraded to .9.0. Now the player plays only first 5 minute or so of each MP3 file. After about 5 minutes, it stops playing and skip to next file. Again it will only play the first 5 minutes before skipping to next file.
Could anyone give me some help?
Thank you.
yue

Well, I solved the problem. I downgraded firmware to .8 and then upgraded to .9.0 and the problem is gone. Also, this time I did not put the player into recovery mode.
Yue

New Muvo N200 - Should I upgrade firmwar

Just got a new Gb Muvo N200 and looking at the settings it is version ..0
Should I upgrade the firmware as I believe there is a newer version.
I havent experienced any pops or crackles yet but it is new and I havent listened to more than 5 minutes

BognorRocks,
The new firmware listed some fixs and added support for Audible audio. If your not having problem with the player and audible audio support is not needed at your end then it's not needed.
Jason

Last firmware RV042

Dera SIR,
where i can download the last version orf RV042 with protec trend net

Here is the links for the rv042 firmware downloads. Hope this helps.
http://tools.cisco.com/search/JSP/search-results.get?isNavigation=true&strQueryText=rv042&strSelectedModifierValue=cdctask%3A%3A^%22Download+Software%22%24%3A%3ATask%3A%3ADownload+Software%3A%3A%3A%3A&strSortBy=&strqueryid=1&websessionid=Pqqkcbkr_HZLAFj1qBRyHr7&strCurrentSimilarSearchBreadCrumb=&strCurrentSelectedModifierValues=&country=US&language=en&profile=enushomesppublished&c_navsequence=3%3A2

How can i downgrade my ipod touch 2g from ios 5.0 to the last firmware?

hey there,
i just upgraded my ipodtouch 2g to ios 5.0, but it doesn't work. it is too slow and some apps dont work. so how can i use another older firmware again, that works without problems??

A 2G iPod can't go to IOS 5
iOS 5 is compatible with:
iPhone 3GS
iPhone 4
iPhone 4S
iPod touch 3rd generation
iPod touch 4th generation
iOS 5 is compatible with:
iPhone 3GS
iPhone 4
iPhone 4S
iPod touch 3rd generation
iPod touch 4th generation

Its been a month since the last firmware upd

Any status on the next one, there are quite a few suggestions out there for new features, I am just wondering when the next firmware update will be released.

We don't give out details on firmware releases. While we do continually improve firmwares and players, there is no guarantee a firmware will be released for a certain player. You didn't mention which one specifically you have, but it's something to bear in mind.
Cat

Suggestion for next/last firmware release of WRVS4400N v2

Since this router already set up for IPv6 and Dual-Stack traffic, would it be possible to give it the ability to get its IPv6 prefix from the WAN side of the router.
Example:
I have Comcast, and as long as my modem and router support IPv6, with the router also supporting DHCPv6-PD to get the /64 prefix from comcast.
I now have an RV180W so this is not an issue for me, but my father is inheriting the WRVS4400N from me and he is also on Comcast.
Thanks
Robert Hessenauer

Hello Mr. Hessenauer,
On this case I recommend you to install the latest firmware available for this device (2.0.1.3)
Let me send you the link from the cisco site where you could download it.
http://www.cisco.com/cisco/software/release.html?mdfid=282414016&softwareid=282487380&release=2.0.1.3&relind=available&rellifecycle=&reltype=latest
If this answer was satisfactory for you, please mark the question as Answered.
Diego Rodriguez
Cisco network engineer
Thank you

What's new in the last firmware of 6630 (ver : 6.0...

Hi.
I update my firmware today!
But I don't see anything new in new firmware.
Can you say what's fresh in this version ?

Bug fixes.
Type "ios 6.0.2" into the search bar at the top of this page by Support and read for yourself.

MUVO TX SE 1go : last firmware K

Similar Messages

Maybe you are looking for