Muvo TX SE Firmw

Hello,
Why aren't there updated firmwares for Muvo TX/TX SE (The latest is .0 5feb2005...) whereas Muvo TX FM's firmwares are often updated ?
It's the same player with/without the radio function, so why updating Muvo TX FM and not Muvo TX ? That shouldn't be difficult to make firmware for these players from the MuvoTXFM firmware...Message Edited by St4rLa on -7-2005 04:4 PM

is any one going to reply to this?
i think that the muvo tx is a fine player i use it when jogging with the arm band, but
why does it not have a playlist facility? and why is the volume so low? i have to have it 3/40
the last time i did a firmware update my player wud not switch on!

Similar Messages

[Expert] Problem with Muvo² 5Go and firmwa

When i turn my mp3 player on, it shows first "Creative", then "Muvo?", and stop here. I can't listen to my mp3, can't connect it to my pc because it's not recognize anymore. Somebody has an idea on how to fix this problem?

A lot of people get the backlight buzz on different MuVo players and it is a hardware "feature" i.e. it can't be fixed by a firmware upgrade.
Different headphones can make the noise appear worse - looks like the HQ-700 fall into this category. Not much to be said apart from:
use different headphones.</LI>
turn off the backlight.</LI>
Sorry
PB

Muvo N200 decreses free space when update firmwa

About 4 months ago i bought a Muvo n200 256?MB?but since then i have been updating the firmware.
When i updated it for the first time my free space was reduded to 242.29 MB
I tried formating it but it wont work !
Why is this happening? What can i do about it ?
?Message Edited by andros344 on 2-30-2005 04:29 AM

andros344 wrote:
Its 2:38 am and i just tried it but it says there is some kind of error and ii end up in the same firmware
I have only heard of one person in here who managed to get an earlier firmware back on once they had gone to .5.0 or beyond. They put on .0.02 - get the link to it from this excellent post by dingens.
I have tried to go to .2.0 and couldn't get it to work - haven't tried .0.02 yet - I'm not feeling brave enough!
PB

Muvo - volume is too high with new firmw

Hi.
I have a Muvo TX 52 mb with usb2.0, and when i upgraded the firmware to .3.something some months ago i got a problem:
I cant decrease the volume enough with the new firmware!:angry: With the old firmware was volume setting "" very low, and the maximum volume wasnt very high. The new firmware has better mawimum volume but the minimum volume is too high... :-S Hope you understand what i mean.
Today i tried the latest firmware again, .2.02, but its STILL too high volume!
This is really driving me crazy, and propably i would need an OLD firmware (which is much worse in other ways), but i cant find any old firmware too download.
Please help me. Thanks!

I've mailed tech support now. If anyone has old firmware install, _please_ let me konwMessage Edited by muvotx on 07-03-2006 06:27 PM

MuVo V200 "dead" after updating firmw

I have a MuVo V200 and i tried to update it with MuVoV200_PCFW_LF__05_02.exe following the installation details provided.
Everithing seemed ok but now the player is dead: it doesn't turn on by battery nor by usb... i tried to apply the firmware again but is impossible 'cause the player is not found in the usb dri've.
What can i do? Plz help me...
PS: is there a way to avoid the pause between two tracks? It's pretty annoying with cd registered in a li've...

Also in terms of gapless playback, about all you can try is encoding the tracks with no ga
ps.
For more see the "gapless playback" link in the FAQ post.

MuVo N 200 new firmwa

Hi, just a little question: will MuVo N200 firmware still be developed in the future or is developing regarded as "done"? The latest fw is .2.0 (24.02.2005) and has still some annoying bugs (which were reported here).

gullfisken wrote:
Hi, just a little question: will MuVo N200 firmware still be developed in the future or is developing regarded as "done"? The latest fw is .2.0 (24.02.2005) and has still some annoying bugs (which were reported here).
No one knows for sure.... guess if they are rebranding the n200 to nano plus then all future firmware update for the nano plus should works for the n200..... so keep those fingers of yours crossed.

Help on MuVo N200 firmw

Hello, can i know why is that when i try to update firmware on my MuVo, an error message occurs saying "Unable to write to device. Device timeout". Thx in advance.

Can you try another PC?

Muvo TX SE just died after trying to update firmw

im getting seriously pissed off, i just tried to update the firmware and some reason there was error and now the player doesnt work at all and cant be recognised by my pc ! what can i do ??

If the firmware update failed then you need to connect your player in Recovery Mode (search in old posts for instructions) and install the firmware again.
PB

MuVo trouble...firmw

My new Mu Vo tx fm would not play WMA files, so I attempted a firmware update. Now my unit is dead. It will not turn on. When I attempt to install the firmware EXE. it searches, then says the device has "timed out". When plugged in to a USB 2.0 port, it will be recognized as new hard ware found but that's as far as I get. (btw it DOES have a fresh battery )

Got it up and running, thanks. But am still have issues with it not playing some converted files. It installs but just passes by most ripped (from original cd) tunes. The files are not listed as protected when in media explorer so I'm at a loss to figure why they won't play. I'm new at this game and need some help, obviously.....:robotsad:

MuVo v200.Is it possible in future firmwa

Is it possible in future firmware to add some information to mp3-players display? For example, when I listen music, I want to know, what bit rate is. There is a place, near the indication of accum charge, so it's will be great if Creative put here information about bit rate
Thank you.

Agreed, this would be a good idea with any of the players. My old Rio 500 USB player did this, and it was very useful.

MuVo does not show up in "My Comput

I have an Emachines 2.92 ghz system with 024 ram running Windows XP and I do have Adminstrati've rights. I installed the software on my computer as instructed. When I rebooted and then attached the Muvo txfm to my usb port. The Muvo screen shows the moving USB icon as pictured in the instruction manual but it was NOT recognized in "My Computer".
There was something under "Control Panel" called Muvo system folder I think and when I clicked that, it said there was no dri've connected and that I should connect the dri've to the USB port. But it already was connected. I tried another USB port but the system would not recognize it from there either. It is listed in Device manager under dri'ves and there is no question mark or exclaimation mark there or anywhere in Device Mgr. but when I select the dri've to go into "Properties" the computer freezes for about 20 seconds. Then properties opens up and it says "there is no problem with this device." A window came up in my taskbar saying there was a problem with hardware installation so the device may not work properly. I disconnected all usb devices and connected the Muvo again but it doesn't show up. Then I rebooted, attached the device again but still the same problem. Then I unistalled the software and attached the device to the USB port and a window came up saying the hardware was installed and the device was now ready for use but it still is not in "MY Computer" so I am unable to access the device to do anything with it. It is in Device Mgr as "disk dri've" now. Then I deleted the device from Device Mgr and rebooted. I installed the driver update called "MStorage_PCDRV_LB__07_00_250.exe" from your website and then plugged the Muvo into the USB port again and it showed up there as Muvo TXFM but still not in My Computer listing.
I tried to install the Firmware update from your website called: "MuVoTXFM_PCFW_LF__9_0.exe" but because the Muvo doesn't show up in "MY computer" it is unable to find the device and it just hangs as it looks for the device.
OK, now I'm thinking the Muvo is a defecti've player so I plugged it into my 998 Dell computer running Windows Me. with no software installation at all and it showed up in "My Computer" in a matter of seconds. I even put a song on it from the Dell computer. So wassup?
Thanks for your help
P.S. I also did these two registry fixes allowing permissions on both (but they were already set to that anyhow) so it did not fix it:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\U SB
And also I downloaded and installed the three microsoft fixes I found on one of the many posts I read on this forum for media player and something else. I cant remember what, I am just so exhausted!

Connect your player and find its entry in Device Manager. Click on Remove then disconnect player. Also select Show Hidden Devices and remove any extra entries for your player.
Go to Control Panel, Add/Remove Programs and remove the MuVo drivers, Mediasource and Media Explorer software.
Reboot PC and then re-connect player - it should be detected immediately by XP.
Another thing it might be is if you are using a front-mounted USB port on your PC - these don't always supply enough current. They allow the player to be seen but not enough to actually do anything with it.
If you choose View Devices by Connection in Device Manager with the player connected and drill down to find the entry for your player, you can look at the properties for the controller and hub that it is connected to. One of these shows the current equired and the current available.
PB

Having a Problem with WMA DRM and Muvo TX FM - Upd

No elapsed time problem with WMA DRM or other protected files from:
Napster
WalMart
Audible.com.
Elapsed time problem with WMA DRM from:
Netlibrary.com
This is an update on the problem that I described below:
Windows Media Player
One problem I had was that Windows Media Player would not recognize my muvo players. It turned out that because I was using a USB hub for the players to connect WMP was not recognizing the players. When I used a direct line to the USB port on the computer, WMP has no problem recognizing the player.
Digital License.
As a test, I bought a WMA song file from WalMart to see if its Digital Rights Management was compatible with Muvo. There was no problem with the correct elapsed time showing. I will also test a file from Napster and add its license details here.
Here is something else I noticed - the differences in
the license for the two types of WMA files:
The one from WalMart - which works fine with the
elapsed time on the MuVo:
This file can be played an unlimited number of times
Collaborati've play for this file is not allowed
This file can be burned 0 more times<<<
This file can be synchronized an unlimited number of
times
The license for this file can be backed up <<<
For the one from netlibrary.com
This file can be played until 4/9/2005
Collaborati've play for this file is not allowed
This file cannot be burned
This file can be synchronized 3 more times until
4/9/2005
The license for this file cannot be backed up<<<<
I have been able to copy WMA with DRM audiobook files to my TX FM, but the elapsed time doesn't change with either play or fast forward. The file is from Netlibrary.com which supplies audiobooks to public libraries. The file plays, but the display stays all zeroes.
I have been sending information and getting replies and suggestions from both Netlibrary support and Creative technical support with no solution. I have the latest firmware and everything else. I have the problem on both Windows XP and Windows 2000 computers. I have downloaded several files, but none of them show elapsed time. I suspect it is something to do with the DRM, because I can play a preview file from Netlibrary - without DRM - with no problem. I also have no problem with other files copied over - from Audible, from CDs, etc.Message Edited by alex20850 on 03-30-2005 07:54 PMMessage Edited by alex20850 on 03-30-2005 08:4 PM

I'm primarily using my TX FM for netlibrary.com audiobooks and also get all zeros on the display.
I've been steadily complaining to netlibrary and my local library about problems/inconveniences, itcertainly is experiencing growing pains; we're the ones getting the pain, though!
I'll post here if I find a (legal) resolution to this.
What firmware version do you have? I have .2.04 and I see that .3.03 is available for download. I've read here that there are problems with .3 with volume limiting and I'm hesitant to change. I do notice that one of the listed fixes is:
Updates the elapsed time displayed during navigation within a long recorded track
so, maybe this is the answer?
Dr Dave

MuVo N200 - A whole host of probl

Not wanting to sound cocky, but I think I can answer my own problem here before you all join in, but hey, who knows, I might be wrong. I think my N200 needs returning to Creative for some serious surgery. Here's "the list":
+ When transferring files with WMP0, a random number of files on the list to be copied will complete successfully. Then, an error message such as "The Server threw an exception" appears. According to Microsoft's Web "Help", this is because an MPEG2 video file is trying to convert and won't. Somehow, I don't think this is the case.
+ If I choose not to convert the files before transfer, it's blind faith as to whether they will all copy or not. In a sync list of 80 items, the transfer will fail seven or eight times on average. No error from media player this time, it's a windows balloon tip saying "delayed write failed". I have to remove and re-connc the muvo to continue the transfer.
+ Using MediaSource, the same error as above occurs after transferring EVERY track.
+ If, by some miracle, I manage to get the songs I want onto the muvo before dying of old age, it's the a 50/50 chance that when I unplug the muvo and switch it on, it will say "file system error", switch itself off and when re-connected will be as blank as the day it left the factory.
+ Alternati'vely, it will be fine until a random amount of time later when it will switch itself off, and then when switched back on it will give the file system error.
+ If, miraculously, it has got through the day without wiping itself, when plugged back in media player will not always be able to remove old songs from the player, and will therefore declare it to be full after copying just track onto it.
Now, before you all jump up, let me just explain the following:
I have ALL the latest drivers, firmware, updates and widgets for Windows, Media Player, MediaSource, the MuVo, my USB ports, my motherboard, and every other piece of hardware just in case it's a conflict. There is nothing else I can download.
I've tried re-installing the firmware (in fact I'm having to do this on an almost daily basis).
I've tried it on a friend's computer: no change, same problems.
I've tried using a fresh install of windows with all the extra hardware stripped out of the pc, and i've tried the same system wit al the updates. Same problems.
I haven't EVER dropped the muvo, I don't li've next to a nuclear power station or on Jupiter.
I've tried using different kinds of batteries.
I've connected it in recovery mode, wiped it and started again. Repeatedly. Several times.
So, as I said at the top, I think I have a faulty muvo, b ut if anyone out there is thinking, "What a fool, he hasn't pressed the 'don't break' button!" then please, for the sake of my sahnity and rapidly receding hairline, HELP ME!
Dave
p.s. My 0 year old sound blaster 6 works flawalessly and always has. My 5 year old sound blaster li've 5. works flawlessly and nearly always has. My zen touch works flawlessly, but is a replacement for a faulty zen xtra. Which worked well, but was a replacement for a faulty jukebox zen. Which work ok, but was a replacement for a faulty jukebox 3 (which had an awesome remote control). Anyone see a pattern here?

davehelps:
The "delayed write failed" message suggests to me that you have write caching enabled for the N200 within Windows. This might be causing problems. I have this disabled - a side effect of this is that I don't have to use the Safely Remove Hardware icon before disconnecting the player (as long as I'm sure it is not being written to at the time).
To disable write caching:
Open My Computer and right click on the dri've letter for your player, choosing Properties.</LI>
On the Hardware tab click on the N200 and choose Properties again.</LI>
On the Properties page choose the Policies tab and select Optimize for quick removal.</LI>
PB

The MuVo V200 beltclip is a joke, Now I have no player. What Can I

Hello all, I'm very disappointed with the Muvo V200 Beltclip. I have had my Muvo since the 9th Jan 2005 and have been using it all the time and had no problems with it what so ever. But yesterday I had taken my player out with me. I had it connected to the beltclip as always. I had taken my headphones out of my ears when I was asking some bloke a question and did not but them back in till about 0 minutes later. When I put them back in I went to turn my player on, But I could not feel it, I look on my belt and all that was there was the dark grey clip that held the player to the belt. I still had the head phones but they must unplugged when the player fell. I retraced my steps but I had no luck finding my player.
All I have now are the Headphones and a dark grey clip, But looking at the dark grey clip there is a hole at the back, which I think something should have been there.
So as you can imagine, I'm very disappointed. What I would like to ask is, Is the loss of my player covered by the English Warranty?
Because I do believe the Beltclip had failed, letting the player fall from my belt. I done my best to find it, but as I said, to no luck.
All thats left now is the part of the clip and the headphones.
<IMG height=295 src="http://thegooddrmartin.co.uk/images/image.jpg" width=35>
sorry for the poor pic (taken on my phone)Message Edited by DrMartin on 04-04-2005 0:42 AM

On the day it happened I was wearing a shirt that covered the top part of my jeans, So only the headphones would have let people know Im carrying a player, If someone was to take it, the only way to remove it would be to lift it, but I still had the clip part of the holder. If someone did take it by ripping it off I would have known about it.
Ok as for it not disconnecting from the headphones I don't know, My headphones did not fall with it, and I did not feel it falling. What I do know is that I have lost my gig V200.
I will phone Creative first thing Monday, But what I was looking for here was someone who might have had the same thing happen with the V200 or another MP3 player, and did the Warranty cover it's

Transferring tracks from Nomad Jukebox 2 to MUVO with Creative MediaSource Player/Organi

I recently installed Creative MediaSource Player/Organizer . When I transfer tracks from Nomad Jukebox 2 to my MUVO the tracks are transferrred as folders, not tracks (which the MUVO cannot play). How do I get the Nomad Explorer to transfer the MP3s as tracks and not folders? I'd appreciate your help.
P.S. I do not have this problem when I use Creative Playcenter to do a similar tranfer.
Message Edited by rrtash on 0-3-2006 02:27 PM
Message Edited by rrtash on 0-4-2006 2:4 AM

PeeBee wrote:
Does the MuVo work with Nomad Explorer? I didn't think it did.
PB
I'm pretty sure it doesn't. Perhaps there's some confusion with the MuVo Explorer, or plain Windows Explorer.

Muvo TX SE Firmw

Similar Messages

Maybe you are looking for