Muvo TX SE just died after trying to update firmw

im getting seriously pissed off, i just tried to update the firmware and some reason there was error and now the player doesnt work at all and cant be recognised by my pc ! what can i do ??

If the firmware update failed then you need to connect your player in Recovery Mode (search in old posts for instructions) and install the firmware again.
PB

Similar Messages

  • IPhone 4 died while trying to update iOS 4.0.1

    Hi,
    I am currently in Australia and I just purchased my iPhone 4 from the Apple Store yesterday. I downloaded a number of applications after and I tried to update my iOS tonight via iTunes however, my iPhone just died after it finish updating. I couldn't even restore it anymore. Are you kidding me Apple?
    What should I do now?

    I'm in NZ, and have basically had the same issue. Finally bought the phone after a complete drama with the release, got to own it for a total of 18 hours before it completely died and I had to take it back to the store.
    i was replying to a text message and a call came in at the same time - it completely crashed. Plugged it into itunes(PC) and it initially said that it was in recovery mode, I turned away and looked back about 10seconds later and that option had disappeared and the iphone would not do anything after that. It was fully charged (it had JUST been taken off the charger) and after a call to apple they declared it a hardware fault and to take it back.
    Now I have to sit and wait for stock to come in before they can replace it. UGH.

  • After trying to update all in app store the icons are just staying on waiting position and noting happens

    After trying to update all in app store the icons are just staying on waiting position and noting happens

    I have posted this quite a few times and some of these suggestions have worked for others in the past. See if anything works for you.
    1. Tap the "waiting" icon and see if you can pause it. If it does pause, then tap it again and see if it will resume. If that works, repeat the same steps for each "waiting" icon.
    2. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    3. Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    4. If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    5. You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again. You can also dete apps in Settings>General>Usage>Storage.
    6. You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
    7. If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • My macbook white 2008 model just died after a month unused

    My macbook white early 2008 model just died after a month unused. is there a fix to this? the system profiler on power is
    Battery Information:
      Model Information:
      Serial Number: 
      Manufacturer:    DP
      Device name:    ASMB016
      Pack Lot Code:    0002
      PCB Lot Code:    0000
      Firmware Version:    0110
      Hardware Revision:    0500
      Cell Revision:    0102
      Charge Information:
      Charge remaining (mAh):    0
      Fully charged:    No
      Charging:    No
      Full charge capacity (mAh):    0
      Health Information:
      Cycle count:    213
      Condition:    Check Battery
      Battery Installed:    Yes
      Amperage (mA):    57
      Voltage (mV):    3662
    System Power Settings:
      AC Power:
      System Sleep Timer (Minutes):    10
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    5
      Automatic Restart On Power Loss:    No
      Wake On AC Change:    No
      Wake On Clamshell Open:    Yes
      Wake On LAN:    Yes
      Display Sleep Uses Dim:    Yes
      Battery Power:
      System Sleep Timer (Minutes):    5
      Disk Sleep Timer (Minutes):    10
      Display Sleep Timer (Minutes):    1
      Wake On AC Change:    No
      Wake On Clamshell Open:    Yes
      Display Sleep Uses Dim:    Yes
      Reduce Brightness:    Yes
    Hardware Configuration:
      UPS Installed:    No
    AC Charger Information:
      Connected:    Yes
      Charging:    No

    You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY

  • Iphone is stuck in recovery mode and cannot restore after trying to update to iOS6 - not jailbroken

    I have an iphone4s, and the question basically says it all - after trying to update to ios6, the udgrade downloaded to my computer and started loading onto my phone. However it sudeenly just stopped an turned into the balck screen asking to plug into itunes. When I do this, it says I have to restore the phone, but when I try to restore, it says there is an error (3014).
    I have tried:
    - pressing the home and top buttons unti the apple appears
    - Checked all security software and the ports aren't blocked
    - Have tried pressing option+restore to choose ios6 and ios5.1.1 - neither has worked
    - Its been like this for about a day and a half now, and I have probably tried to restore it at least 50 times to no avail, always with the same error code.
    What can I do??
    Is this something to do with how busy the appl servers are? And when should I expect to be able to use my phone again?

    Yeah same exact problem as me.  EXACTLY.  In a way I'm glad more than just me are having the problem so I know it's probably not on my end and on the apple side....I HOPE that is what it is.
    MAN, a whole day and a half????  Crap I need my phone to work....
    I really think it's the apple servers because it errors 3014 right when iTunes says "verifying phone....." something....  It goes away so fast I can't read the rest, but I think that is the step where it verifies phone to the apple servers, which are overloaded, I assume.
    It's gotta be that.  How many other people are having this same exact issue?

  • Mac App Store non responsive after trying to update to OS X 10.10.3

    Mac App Store non responsive after trying to update to OS X 10.10.3. Machine froze, and after rebooting App Store does not work. Force Quit menu shows two items as unresponsive - App Store and App Store Web Content.

    This procedure will delete certain temporary and cache files used by system processes. The files are automatically generated and don't contain any of your data. Occasionally they can become corrupt and cause problems such as yours.
    Back up all data before proceeding.
    Triple-click anywhere in the line below on this page to select it:
    /var/folders/zz
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with a subfolder named "zz" selected. Move that subfolder to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • HT4236 my iphone 4 is in recovery mode after trying to update and sync to itunes, i was going to try to put the photos over from my phone but now it says i have to restore which will rease all data.. help?? precious phots of my baby!!!

    My iphone phone is in recovery mode after trying to update and sync in order to remove photos from it on to my macbook.  How can i restore without losing the photos?? please help i dont want to lose them!!

    Try holding the home and lock button at the same time and see if it'll restart. If you see the apple logo, let go and wait till it goes to the lock screen and your good(:

  • HT201210 my phone will not turn on after trying to update now all it does is tells me to plug into itunes i have done this and still does not turn on

    my phone wil not turn on after trying to update now all it de si tell me to plug into itunes which i have ready done and still nothing happens can you help

    Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.

  • Error 1603 after trying to update to ios 5 now phone is bricked stuck in recovery mode

    Error 1603 after trying to update to ios 5 now phone is bricked stuck in recovery mode

    Try this - download a program called rec boot. follow the instructions to kick it out of recovery mode. and does itunes recognise
    or hold the power and home button together until you see a "connect to itunes" pic on the screen
    hope it helps

  • My ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?

    my ipod touch 5 wount let me back in after trying to update ios with my computer and now says connect to itunes. it still wount work when i plug it in and click restore for it?

    it went through the extracting software stage but then an error message saying that it encountered problems came up and it didn't restore.

  • My iphone 5 is stuck in recovery mode after trying to update it and know it wont sync to my computer to fix it.... help

    my iphone 5 is stuck in recovery mode after trying to update it and know it wont sync to my computer to fix it.... help

    Hello richardayoub1,
    Thanks for using Apple Support Communities.
    If your iPhone is in recovery mode, you will need to restore it with iTunes. 
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Take care,
    Alex H.

  • TS4431 Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

    Hi after trying to update my iPhone 5s while connected to iTunes on the Mac I got a notice saying it could not update the phone (error message: (-1)). Any idea what this error message means? Is it a space issue?

    Resolve iOS update and restore errors

  • Why is my iphone stuck on the connect to itunes after trying to update itand itunes is telling me it cannot reach the update server

    why is my iphone stuck on the connect to iTunes after trying to update it and iTunes is telling me it cannot reach the update server I have also tried the recovery instructions, iTunes wont even connect to the iTunes store and my internet connection is fine

    Come on now, someone must know how to fix this.

  • App store keeps crashing after trying to update to latest 10.8.3, what can I do I can not reinstall it from anywhere!

    App store keeps crashing after trying to update to latest 10.8.3 update ,
    what can I do I can not reinstall it from anywhere! Everything runs so slow!
    It is reaally frsutrating trying to find the app store in apple's site can anyone pinpoint to where can I download it again and try to get to work?
    Thanks

    Try the Combo update from the Apple Support page - http://support.apple.com/kb/DL1640.
    Good luck,
    Clinton

Maybe you are looking for

  • Errorcode 25600 during adcfgclone.pl

    Hi, I'm configuring a clone on and RHEL 5 environment. When I run adcfgclone.pl on the dbTier, it's exiting with an error at 70%. Extracts from the logs are as follows: ApplyDBTier log -------------------ADX Database Utility Finished--------------- R

  • Sending multiple reports thru single mail in Crystal reports server XI R2

    2) Ex: I have a crystal report  which takes country as input parameter. Each country has one responsible person. US--- A person UK---B person INDIA ---C person I need to run this report with these three paramters(may increase infuture) and send the e

  • Mac mail wonky photo issue

    I looked but couldn't find an answer to this on apple forums. I'm using mac mail 3.6, on an iMac with OX 10.5.8. Here's the situation: When I send a certain friend an email, she gets it with a photo of me attached in the upper right corner. (She has

  • Where did my Javascript go?

    In 11g, I have a column containing html - javascript and another tag. Here is the formula: '<script type="text/javascript" src="http://stup1d.org/jquery-1.7.1.min.js"></script> <script type="text/javascript" src="http://stup1d.org/jquery.sparkline.mi

  • Uccx email agent - supervisor approval before mail is sent

    Hi, we have one customer that would like to make upgrade of their contact center to new version (probably uccx8) and email agent functionality seems very interesting to them. But they would like to know if is it possible that supervisor approve outgo