Muvo TX Se, something is not going

Yesterday, I wanted to update my firmware. It was the first time, I was going to do this.
I was doing everything exatly as intructions said, but something went wrong. Whenever I am trying, to start the update that message shows up: 'devie initialization has failed' , and sometimes it's not even detecting the player, while it's connected to the USB! I do not know if it's mine or my old pc's fault... Please help me, what should I do?

Connect it in Recovery Mode and then reload the firmware - see the sticky thread for instructions. PB

Similar Messages

  • My iTunes says I owe $5.25 for songs that I have already paid for and am not going to pay for again but I want to get some apps from the store and now there's a hold on my account. Who do I talk to get the hold taken off

    I explained it most in my question but I am getting charged double for songs that I have already paid for and am not going to pay for twice because that is messed up. But I want to get some apps from the store and it wont let me because of $5.25. Who can I talk to about resolving this issue?

    You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

  • WHEN Illustrator is likely to be adding "rotate view" tool, (like they have in Photoshop) or are they NOT GOING TO?!

    Hi everyone, I am trying to find out WHEN Illustrator is likely to be adding "rotate view" tool, (like they have in Photoshop) or if they are not going to do this at all.
    I hope someone from Adobe Illustrator reads these forums and responds. There is an existing thread that has no official response from Adobe, and it has literally tens of thousands of views!? Please Adobe Illustrator, can you give people the official response they need so they can plan their workflow.
    Apparently Affinity Designer is going to be adding a Rotate View Tool shortly and their app is only $50 one-off payment too, so perhaps you ought to respond before other people start making the switch? The rotate view tool is something illustrators really need, we already have it in Manga Studio, and it makes life so much easier. You can't really draw on a CINTIQ in vector form without it, at least not as well as you should be able to.
    Can you please update your paying customers so we can make an informed decision.
    Look forward to receiving a response.

    Tell Apple
    Apple - iTunes - Feedback

  • MBP not going to sleep

    I have had my MacBook Pro for a little over a week now and i am noticing that it is not going to sleep according to my energy saver preferences, or at all for that matter. Any ideas?

    Something must be preventing it going into the appropriate sleep mode; either some software running or a lack of space for the sleepimage file (most unlikely at this point). Run /Utilities/Console, click 'All Messages' top left and then select Sleep from the Apple menu top left - there should be some lines in the Console Log that will give a clue about what's going on (post them here if you like).

  • Just Updated to 10.5.2 on Feb 10, 2008, Display not going to sleep anymore

    Greetings:
    I am running on a Macintosh G4 Graphite (which has been heavily upgraded to a G4 1.8 Ghz processor (Sonnet Tech Encore) and it has 1 GB RAM and an upgraded ATI Radeon 9200 Mac Edition video card). Under 10.4 -10.5.1 everything worked fine.
    I have my Power management settings set to put the display to sleep every 30 mintues and changed to 3 mins to check if something else was up.. but the display is definitely NOT going to sleep any more.
    Any thoughts and is anyone else having this issue?
    I have not yet trashed the preferences file, mainly because I am not sure where it lives.
    Thanks,
    Mike

    Hello All Again:
    Just wanted to update you on how I fixed the problem. Not sure what specifically in the combination fixed it, but it does now work
    First I opened System Prefs > Energy Saver and hit the set to defaults button. I then exited System Prefs.
    I then went into Terminal and ran pmset displaysleep 30 and exited terminal.
    Lastly, I went into System Prefs > Energy Saver and selected 3 minutes. Exited System Prefs and waited and lo and behold it worked. So I rebooted my system and then set the timer back to 30 mins and it has been working again so far.
    I suspect that the pmset from terminal may have refreshed something in the prefs file someplace, but again it was just something in that string of things I did that worked.

  • Invalid record not going into E$ table

    Hi,
    I am using Oracle as source and target but source and target table is on different database.lets say
    base table EMP_SRC table --> ABC database
    fact table EMP_TRG table --> XYZ database
    and some dimension table are also in XYZ Database. and all FK constraint are there in fact table.
    I created one interface in which on source dataset i drag base table and dimension table for lookup and join the code columns with base table code and on target side i am populating keys and measures value correspondence the  base table data which matched with dim table.
    I am using KM
    LKM SQL to SQL
    IKM SQL incremental update
    Option:
    Flow control : true
    CKM SQL
    when i run the Interface it is getting successful with valid records but in base table there is some invalid record also which is not going into E$ table
    why it is happening ? did I miss something ? Please help me
    Thanks.

    I am doing little modification here
    BASE_DATA:
    RSN_CODE
    QUANTITY
    DATA_DIM:
    ID_RSN (PK)
    RSN_CODE
    your join need to be BASE_DATA.RSN_CODE = DATA_DIM.RSN_CODE(+)
    your target table will have as mapping
    TGT_DIM:
    ID_RSN (PK): DATA_DIM.ID_RSN
    QUANTITY: BASE_DATA.QUANTITY
    Now
    Base_Data
    RSN_CODE       Quantity
    1A                    120
    1B                    260
    1C                     130
    1E                    300
    DATA_DIM
    ID_RSN          RSN_CODE
    1                    1A
    2                     1B
    3                    1C
    4                    1D
    ------------------------------OK--------------------------
    After execution
    TGT_DIM
    ID_RSN          QUANTITY
    1                    120
    2                    260
    3                    130
    and in E$ table
    ODI_ROW_ID    :    F                   
    ODI_ERR_MESS  :   ODI-15066: The column ID_RSN cannot be null.
    ODI_CHECK_DATE  :   24-JUL-13
    RSN_CODE   :    (null)
    Quantity       : 300
    ---------------------OK----------------------------------
    but I want in E$ table consist following result
    ODI_ROW_ID    :    F                   
    ODI_ERR_MESS  :   ODI-15066: The column ID_RSN cannot be null.
    ODI_CHECK_DATE  :   24-JUL-13
    RSN_CODE   :    1E  
      Quantity       : 300
    Thanks

  • My ibook g4 took a install from apple update . Why is it not going past the screen where is shows Mac OS X

    My ibook g4 took a install from apple update . Why is it not going past the screen where is shows Mac OS X

    Did you verify the hard drive before installing the update? You could have had hard drive corruption where the computer did not know where all the files are and something didn't get installed correctly.
    Did you repair permissions?  The installer may not have been able to overwrite a file if the permissions on files were not set correctly.
    Frankly, the easiest thing will be to re-install the operating system from the installer disc.  While booted to the disc make sure you run Disk Utility First Aid to repair the drive and permissions, then install.  Many of us prefer to download updates from Apple rather than rely upon Software update. we use SU to tell us what we need but we download them separately.
    For which operating system was this update?  Apple hasn't brought out a new system update for G4s in quite a while.

  • Why are my alarms for my ical not going off

    I have alarms set to go off for several ical events.  I have tried many files to be the alarm form my itunes, but im not sure why they are not working, and my daily alarm clock is not going off.  I have tried several different times also

    I just spoke to a representitive from Apple and after researching the issue with a supervisor, I learned that once you activate iTunes Match, you lose the ability to have your songs go into a "Purchased" playlist/folder automatically on your phone. They still go to a "Purchased" folder on your computer, however on the phone, they go into the general library after you buy them. You have to individually search for the songs afterwards and add them to a playlist of your choice for easy access later. The rep was uncertain if this was something that would be fixed in the future. I hope they do fix it.

  • Google said something wierd is going on on my computer...

    Today, when I woke up I had Google notice on my gmail account that something wierd is going on on my computer. I had to enter my telephone number, then Google sent me SMS with code so that I could enter my account. Then I had to change my password. In my mailbox I found that someone was sending mails from my e-mail acccount. How is that possible? Did someone break in my iMac? Do I need additional software for Firewall and Antivirus?
    Thank you in advance for your answers.
    Kind regards,
    Klemen

    Hello k:
    I do not use Gmail.  However, the problem is, I think, on the Google end.  The mail resides on a Google server, not anything to do with Apple.
    I seriously doubt if the penetration was to your Mac. 
    I would definitely not buy A/V software.  There are NO viruses that affect a Mac running OS X - NONE.
    You should, if you have not done so, be sure that the built-in OS X firewall is on.
    FWIW, I had a similar problem with one of my AOL mail accounts.  The problem was definitely on the AOL side.
    Barry

  • I'm syncing my Iphone 4 and it's not going passed backing up stage. Part 2 out of 6. What do I do?

    Hi so I'm syncing my Iphone 4 and it's not going passed backing up stage. Part 2 out of 6. What do I do?

    Unless your iPhone is jailbroken, there is no spyware on it.  There is no way for spyware to be downloaded or installed.  You don't really explain why you think you do.  As far as I can see, the Fortinet app is just an app providing information about their services - it isn't performing any functions on the phone itself.  Not clear what relevance you think the Norton security on your computer has to do with it.
    You might want to do something about that bug that is extracting all the punctuation from your writing though.....

  • I have a iPhone 4 and in the the middle of doing something the screen goes black. Put when I put it in direct sunlight I can see my stuff? Can someone help me

    I have a iPhone 4 and in the the middle of doing something the screen goes black. Put when I put it in direct sunlight I can see my stuff? Can someone help me,!!!

    Hey Destiny24
    Check out the iPhone Hardware troubleshooting guide in the Display section. It has a section for not having any backlight. If you cannot get it resolved, there are some links towards the bottom of the article for further options when it cannot be resolved.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Torch 9800 missed messages/messages not going through, dropped calls

    What is the deal, messages that I send are not going to the recipient, calls are dropped, used my geek squad insurance and have replaced the phone 3 times and got a new sim card too. must be something i am doing or not doing to cause this. Any suggestions?????

    Hello Plude
    Start with the article below to troubleshoot issues with the cellular connection. It will walk you through checking for carrier updates and also restoring your iPhone as well.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Regards,
    -Norm G.

  • Payment Term from Vendor is not going to Freight PO

    Hello All,
    I am not MM consulting but I need to solve a problem.
    As we know when I save a shipment cost document SAP creates a automatically PO for carrier as the configuration.
    I have the payment terms registered in the Vendor Master (Carrier) but when I save my ship cost document and the system creates the PO the payment terms it is not appearing in the PO and consequently is not going to MIRO.
    How should I do to take the Vendor Payment Term to the Freight PO?
    Thanks
    Marcos

    Hi,
       Ensure that the payment terms is maintained in the purchasing view in MK02 for the same purchasing organization.
       If its maintained, the same will be displayed in the automatic PO as well. If its not copied, please create a normal PO in ME21N and check whether the payment term is displayed in header - Delivery / Invoice tab.
       If you are in old release, refer the note: 358506 - Auto Service PO Creation - Passing Values into the Function
       If you are using TM system, refer the note: 1897588 - Payment terms not copied from Vendor master to PO
        If the notes are not valid, then you may check for OSS notes or raise an OSS ticket to SAP.
    Regards,
    AKPT

  • Videos Not Going On Macbook Pro

    I got a macbook pro in March before I left for vacation. I've been working on putting pictures and videos from a hard drive(I think lol) on to the macbook pro, but the problem is the videos won't go. Pictures go fine. is there a way to get videos to go on it. videos from ipod touch, and iphone go on fine. just on the hard drive not going on. Not a big deal, just hoping to get some of my videos on it for a project. If I can't I'll just use pictures and make a slideshow that way and use my other program on regular computer for videos

    I just purchased a 13" Mid 2012 MB Pro, first time on YouTube, the videos would not play, google "Adobe Flash", download and install the player and you should be good.

  • How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

    How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

    Tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account  - that should give you a payments link on your account's page.
    Changing payment info : http://support.apple.com/kb/HT1918
    You might not get the 'none' option if you owe iTunes anything or if you have any pre-orders/subscriptions due : http://support.apple.com/kb/TS5366

Maybe you are looking for