MuVo TX suddenly not recogni
Hello All I'm hoping someone here has an idea. I just tried by MuVo Tx Fm on my WindowsXP computer for the first time after loading the latest drivers. XP deli'vers a message saying the USB device has failed and is nto recognized. When I click on the message, it says no drivers are installed (when I insert my old MuVo CD, . I get a message saying a newer version of the driver is installed,and it terminates) I then plugged it into my Win98 comptuer (the one I've been using with it), and the players does not show up in device manager. The player IS working. I can listen to anything that's already loaded. When I plug it into either computer, I see the connection image on the player LCD screen , although the screen is NOT lit up. Since the player is not recognized by either computer, I cannot upload files (music or otherwise).Any ideas Thanks. Anthony Giorgianni
Message Edited by Giorgianni on -6-200704:28 PM
I got mine woking. This what I did.
First I did not followed the recovery instructions.
If you installed the Device Recovery Mode drivers uninstal and reboot pc.
I did downloaded the MStorage_PCDRV_LB__07_00_250.exe (link is in recovery sticky) just to have the latest drivers.
Plug the MuVo TX FM to your pc usb.
When the install wizards appears do nothing.
Unplug MuVo.
Close wizard.
Plug MuVo again to your pc usb.
Run the firmware update (Go to download section to get it). Gi've it a minute (more or less).
The upgrade process will do something, I don't know what it is that recognizes the Muvo (The Muvo turns on).
Follow instruction on screen.
BTW your Muvo will be formated, keep this in mind if you have important info in it.
I hope this hel
ps.
I went thru a lot of trial and error so I may have missed a step.Message Edited by jibaro009 on 0-09-2006 06:22 PM
Similar Messages
-
Ipod shuffle 2nd gen suddenly not recognized by itunes, any ideas?
My 2nd gen shuffle is suddenly not recognized by itunes, all troubleshooting done per apple support, ie make sure cords plugged firmly, try all usb ports, try different cord etc... any ideas?
Hello,
I had a similar problem. I posted my problem in this link:
http://discussions.apple.com/thread.jspa?threadID=836301&tstart=0
Would you read that and see if it sounds like something you're experiencing? If so maybe we can both scream for help on here at the same time, and get some answers! -
Windows suddenly not recognizing iPhone, yet recognizes another iPhone fine (sees in iTunes, etc.) USB appears to be fine - passes electrical to iPhone until operating system (XP) boots, and then "disconnects". I've gone through all of Apples suggestions for troubleshooting - including msconfig. Same result - quick double "bong" tone and no connectivity to iTunes. Versions are all up-to-date.
Any suggestions out there?How did you get the VMWare sync to work? I hate Apple at this point.
-
mail is suddenly not recognizing my password. it has done this now and then for a few minutes, but this time it's been days. anything I can do?
try resetting your phone by turning it off and back on again. The servers may still be having a hard time keeping up, so you may just need to wait a little while and try again.
-
USB suddenly not recognizing devices
Hello,
I have a problem.
My MacBook Pro suddenly stopped recognizing usb devices. This morning everything was working fine, but for some reason a couple of hours later it's not working anymore.
I can connect my phone via usb and it's reloading the battery. I can't get into my files though, while I was able to do that this morning.
My MaKey MaKey also gets power and the lights flash. I can use it to play an online game. It isn't being recognized as an usb device though, and I can't upload new code to it.
I haven't changed anything between the point it was working and the point it is not working anymore.
The only change is that I've tried to connect my MaKey MaKey and upload code to it. But that didn't work, because it said there was nothing connected to my usb port. That's how I found out that it was broken.
I have tried resetting my PRAM and SMC but it both didn't help.Thanks for your answer.
I already tried the things listed in the link you sent, but unfortunately they didn't work.
However, a few hours after I posted my question things started working again. I can connect my phone again, and the MaKey MaKey shows up in the USB list if you go to About this Mac. Still can't upload anything to it though.
But I guess my problem is solved. -
External Hard Drive suddenly not recognized
I have a WD 500GB external hard drive that I use to back up my data. I only have one hard drive as I'm currently living abroad and couldn't bring a 2nd with me.
I plugged in my external last night to back up my MacBook Pro and it backed everything up. I even went into Time Machine to go back and restore a file or two and that worked without problem. I have been using this drive for about a year to back up everything on my Mac and, although sensitive, it seems to work okay.
I plugged it in this morning and nothing. My Mac will not recognize that the drive is not plugged in in Time Machine or in Finder. If I go to Apple Logo > About This Mac > More Info... > Storage tab, it just shows my internal hard drive and my CD/DVD drive. If I click on Disk Utility with the drive plugged in, it shows my Hard Drive (Macintosh HD) with two icons, one inset below the other and both in black font, and then my external hard drive has two underneath, but only the top one is black font - the one underneath is greyed out.
It goes like this:
250.06 GB Hitachi...
Macintosh HD
500.08 GB WD My Passport
Time Machine Backups (greyed out)
Superdrive (greyed out)
When I clicked on the 500GB one and told it to repair/verify it said the disk was working fine. I tried unplugging and replugging in the drive (it is not recognized in Finder so I could not properly eject the disk). I restarted my Mac with it unplugged and plugged it in afterward and nothing.
The HD itself is working, the light is blinking (not solid) and I can feel the hard drive spinning, but I'm at a loss as to what to do to get my Mac to recognize it again.
Any suggestions would be helpful.
Thank you!I also wanted to add, when I click on the greyed out Time Machine hard drive that's listed and then click "Info", this is what it says:
Name : Time Machine Backups
Type : Partition
Disk Identifier : disk1s2
Mount Point : Not mounted
File System : Mac OS Extended (Journaled)
Connection Bus : USB
Device Tree : IODeviceTree:/PCI0@0/EHC2@6,1
Writable : Yes
Universal Unique Identifier : 56EF6088-FFCE-300B-81D7-3E0986532AB5
Capacity : 499.74 GB (499,735,552,000 Bytes)
Owners Enabled : No
Can Turn Owners Off : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : No
Disk Number : 1
Partition Number : 2 -
Computer suddenly not recognizing device
My computer is not recognizing my iPhone 5 when I plug it in to transfer purchases and update. I have had the phone for awhile and it was working just fine.
Great! It's not the first thing you think of, but my philosophy is "when in doubt, reboot." What probably happened is the AppleMobileDeviceService crashed. This is the easiest way to restart it.
-
Z2 suddenly Not recognizing the SIM and no signal.
When I'm using data for straight for like 2 or 3 hours, the phone suddenly stops recognizing the SIM and it shows no coverage. I have to restart the phone all the time :/
For hardware issues you think you may have you are best to either return your device to the place of purchase or contact Xperia care and have it inspected http://www.sonymobile.com/global-en/support/contact-us/
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman -
Windows suddenly not recognizing iPod Shuffle - drive letter conflict
If you're having troubles with your PC not recognizing your Shuffle even though it used to recognize it in the past, this is just something else to consider (sorry if it's already been covered):
When I originally connected my Shuffle to my laptop on my home network, it was recognized immediately, and my WinXP OS assigned it the drive letter "I". Later, with the Shuffle no longer connected to the laptop, I was setting up my home network, and I mapped one of my shared network locations to the "I" drive letter on my laptop. The next time I plugged my Shuffle in, Windows would not recognize it. I proceeded to plug it into both of the other computers on my home network, and it was recognized immediately on both of them. So I then went back to the original laptop, disconnected the network drive mapping I had set up for "I". Once I did that, when I plugged my Shuffle back in, the Shuffle was again being recognized immediately (not surprisingly, still as drive letter "I"). In short, Windows has a memory of drive mappings made in the past, and sometimes this can produce unexpected or unwanted behavior (I would have expected my Shuffle to automatically be assigned the next open drive letter, but alas, that was not the case in my experience).
To minimize the possibility of running into this problem again (in case I do more network drive mapping in the future), I used the Disk Management utility in WinXP to change/force the Shuffle's drive letter on my laptop to be "Z" (right click on My Computer and choose Manage, then look for the Disk Management module - you probably will need Admin rights to do this, but I haven't confirmed that).
PC Windows XP ProHad this happening too, had a very old cable, tried a new cable and it worked great. My ipod was showing up in itunes, but not in windows (or in device manager). When I tried to use the utility to copy files from my ipod to my hard drive I couldn't do it (wonderful utility getsharepod.com). The new cable solved the problem!
-
Itunes all of a sudden not recognizing ipod connection
just an hour before this happened i made an update to my ipod then this happend. i re-installed the ipod and itunes software, but nothing. this ipod is really aggrevating me b/c u expect less hassle from a $300 product.
please help!!is your ipod functioning normally?
if itunes is not recognizing it, read the following:
http://docs.info.apple.com/article.html?artnum=61711 -
4G iPod suddenly not recognized by Windows but firewire charges it.
All of a sudden today, my 4G iPod isn't recognized by either of my 2 computers through any firewire port. When connected, it charges and the charging icon blinks, but the iPod screen does not say "do not disconnect" like it's supposed to. It just remains in the regular menu mode (fully functional and playable through earphones). iTunes reports "No iPod Connected." My PCs do not see it as a drive, disk or an iPod. It was fine earlier today and nothing abnormal occurred to the iPod or to my computers.
One of my PCs is running Windows XP Pro and the other is running XP Media Center Edition.
So far I have:
-reset the iPod 10+ times
-tried the internal diagnostics (all passed)
-putting it in "disk mode"
-rebooted my PCs numerous times
-run iPod Updater to see if I was able to update or restore ( software just says "plug in an iPod to update it")
-tried several different ports on my PCs and several different iPod cables (with and without a dock)
-tried ending and restarting iPodService and iTunesHelper in Task Manager
-kicked myself for not extending the service plan with Apple
I don't think that there is a problem with the iPod port itself because it is able to charge through the firewire and AC adapter.
Can someone please offer a suggestion? I really don't have hundreds of dollars to pay for repair or buy a new one. Any help would be greatly appreciated. Thank you.
PC Windows XP ProOK I fixed it. I'm not sure how or why it worked but it did. Here are the steps I used if it helps anyone:
1. Reset charged iPod while not connected to machine.
2. Put the iPod in Disk Mode.
3. Connected it to the USB 2 port
4. Windows saw it but itunes said it needed to be restored and could not see any of my music.
5. Installed Anapod
6. Anapod saw the iPod, and corrupted music files.
7. Using Anapod's Manager Options (right click on tray)/ ipod devices/Recover Missing Tracks, the music was quickly restored and itunes was able to see the whole library
8.Using Copypod, I transferred all the music on the ipod to my computer.
9. Restored the ipod with the latest update utility
10. Transferred my music back to the ipod
I hope this helps someone.
PC Windows XP Pro -
TS1410 iPod classic suddenly not recognized by iTunes
My 30Gb Ipod suddenly is no longer recognized in iTunes on my MacBook Pro. And all the music on it appears to have been wiped clean. However when I plug it into a PC, the device is recognized as a portable hard drive that it wants to reformat. And iTunes does still sync fine with my iPhone and iPod Nano. Can anyone help with this please?
Well, my 3rd gen iPod (that's so old it has to connect using FireWire), my 4th gen iPod (2004 model), and my 1st gen iPod shuffle (from 2005) all still work fine on my iMac with the latest iTunes. Can't believe everything on the Internet...
If it looks like the iPod currently has no songs on it when you look on the iPod, you should probably do a Restore on the iPod using iTunes. There may be data corruption on the iPod's hard drive. This is done from the iPod's Summary tab in iTunes. This will erase the iPod's hard drive, re-install its software, and set it to default setting.
Since the iPod is not being recognized by iTunes when connected, put the iPod into Disk Mode first
http://support.apple.com/kb/ht1363
Hopefully, iTunes will now see it. It may say the iPod is in "Recovery Mode." Try doing a Restore, if possible. -
External Hard Disk SUDDENLY NOT RECOGNIZED!
The mac is suddenly no longer recognizing my external hard drive. I have called apple support, but the only solution they suggest is for me to bring it into an Apple store for a repair... Unfortunately I don-t have the time right now to go to an apple sotre, and I was wondering if any of you out there had a solution,
ISSUE: External Drive (Buffalo Ministation 1TB) no longer recognized by mac.
INFORMATION/TESTS:
- PRAM AND SMC rests were done, but this made no change.
- Safe boot and login with another account didnt change anything
- Disk doesnt appear on disk utility
- Did another update of OS X 10.8.2
- The external drive works fine on other macs and PCs so the external drive it self is fine.
- All the USB ports are fully funcitional with other USB sticks and External hard drives.
PROBLEM:
I believe and so does the apple care, that the computer is no longer supplying sufficient power to the external drive in order for it to run.
Does anyone know a fix?
OR, is it possible that a hard disk, which has both USB 2.0 and 3.0 capabilities, suddenly stops working on USB 3.0 ports but continues working on a USB 2.0 port? I have no other USB3.0 ports in my hands in order to test the device!
Thanx for your help!I'm guessing it's connected via USB, however, if connected via firewire I'll include the following links.
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151?viewlocale=en_US
What to do if your computer won't recognize a FireWire device
http://docs.info.apple.com/article.html?artnum=88338
Dealing with FireWire problems (drives not mounting, devices unrecognized, etc.)
http://www.macfixit.com/article.php?story=20041221081432908
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
Cheers, Tom -
External Hard Nrive Suddenly Not Recognized...
I've had my 200GB Western Digital external hard drive for almost two years. About 3 days ago it suddenly wasn't recognized by my Macbook. It's disappeared from Finder, it's not in Disk Utility, and I don't know how to fix it. It powers up when I plug it into the USB drive, but none of the 170GB of music files that I store on it can be found by iTunes.
I'm convinced that I'm basically screwed.
Someone please tell me that I'm wrong.I'm guessing it's connected via USB, however, if connected via firewire I'll include the following links.
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151?viewlocale=en_US
What to do if your computer won't recognize a FireWire device
http://docs.info.apple.com/article.html?artnum=88338
Dealing with FireWire problems (drives not mounting, devices unrecognized, etc.)
http://www.macfixit.com/article.php?story=20041221081432908
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
Cheers, Tom -
I have an HP 2711x monitor.
Anyone suddenly have a problem with it no longer recognizing any digital source input with the HDMI port (or DVI), yet the VGA port works fine?
Thanks.Hello Largelee,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand you are having issues with your HP 2711x Monitor not displaying HDMI or DVI inputs, yet it can display VGA inputs. Are these inputs all coming from the same device? Such as your computer? Does the computer's outputs show up on other devices via HDMI and DVI? If it works are you using the same cables? Are there any messages displayed on the monitors screen when you have the HDMI or DVI hooked up?
Check to see if any of the documents below pertaining to the HP 2711x Monitor pertain to your issue:
Flat Panel Monitor Displays Message about No Signal, Signal out of Range, Sleep, or Power Save
'Input out of Range' Error After a Recovery or Upgrading to Windows 7
Monitor is Blank
Please respond with the answers to these questions so I can further assist you. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter
Maybe you are looking for
-
I'm installing windows 8 64 from iso dvd-I did the partition wiht BCamp 5. I did the usb drive with the compatibility software-once installation start from the dvd, it ask me for some disk, usb or dvd drivers to continue. How I can continue the insta
-
Zen Nano Plus - can't move music to it all of a sud
My daughter has had a Zen Nano Plus for about 4 months - no problems up to now. She wanted to put some new music on it, and no matter what we try, we get an error - Transfer error - an error has occurred while transferring this file. I've tried it us
-
Displaying a 2d overlay on a 3d canvas
how can i display a image like a interface on a 3d canvas ive tryed imageoverlay but it doesnt work for me
-
Can't Update Genius, No Genius Mixes
Since installing iTunes 9 on Snow Leopard, I can't Update Genius. When I try to, I get the following message: "We could not complete your iTunes Store request. The network connection was lost. There was an error in the iTunes Store. Please try again
-
How to use ClassPath defined in META-INF/MANIFEST.MF in an EAR
Hi, We have an EAR Shared Library (Name = AA) deployed in Weblogic. EAR contents are like -> APP-INF/lib/directoryA/<<50 JAR Files>> META-INF/MANIFEST.MF --->> Has Class Path to above JAR files, Spec Version, Impl Version etc META-INF/application.xml