MuVo V100 and Lithium Batter

MuVo V00 works great on alkaline batteries. However, using an Energizer Lithium AAA the unit will not power up. I tried 2 Lithium batteries without success and both Lithium batteries measured .7 Vdc versus the typical .5 Vdc. I've read that Lithium batteries have a low internal resistance and some devices do not sense the battery. Anyone have any additional info or experience?in this area?Thanks...

I also have a problem with my Mp3 player Muvo V00 months old, It happened that the mp3 player lost some music files by itself and when I turned it on I could only listen to few songs on it. Afterward, I connected it to my PC but it wasnt responding and the computer system told me that the windows was unable to save all the data for the player ( File H: ), and it showed?" Delayed write faillde, the data has been lost. Save the file somewhere else" on the computer. What is the solution to this ? Can someone help me out

Similar Messages

  • Muvo V100 and my

    Hi
    SOrry for my english but there is no french community for creativ's product
    So I'll will explain my problem as good as I can
    I have a mp3 player Muvo V00 and I would like to know if there is an adaptator to plug it in my car cigar lighter.
    Thanks

    I also have a problem with my Mp3 player Muvo V00 months old, It happened that the mp3 player lost some music files by itself and when I turned it on I could only listen to few songs on it. Afterward, I connected it to my PC but it wasnt responding and the computer system told me that the windows was unable to save all the data for the player ( File H: ), and it showed?" Delayed write faillde, the data has been lost. Save the file somewhere else" on the computer. What is the solution to this ? Can someone help me out

  • Muvo v100 and Spiralf

    I have a (new) Muvo v00. I have loaded some music from when I was using Napster with no problems.
    I am trying to use the Spiralfrog service I just learned about. I can drag and drop them, and they show up in the player, but do not play...the numbers do not advance, nada.
    I tried to upload the Spiralfrog music via MediaSource 5 as I thought might work from reading the forums and the music won't transfer at all..."error transferring...". ?
    I have restored the player with the program on the Creative website and reinstalled the software on the disk.
    I am not usually computer stoooopid, but geez, this is frustrating.
    Any help (with details) will be much appreciated.
    Thanks!
    P.S. I bought this this (what I think is a cool little player) to substitue my dinosaur Samsung Napster (printed on the player) YP-90 that Napster no longer supports. I used to be able to buy a single song, add it to a play list through their Napster software and be on my way. Now, they no longer support their own player and sent me pages upon pages of instructions on how to roll back WMP to use it to load music. Bah. Thanks for listening

    I also have a problem with my Mp3 player Muvo V00 months old, It happened that the mp3 player lost some music files by itself and when I turned it on I could only listen to few songs on it. Afterward, I connected it to my PC but it wasnt responding and the computer system told me that the windows was unable to save all the data for the player ( File H: ), and it showed?" Delayed write faillde, the data has been lost. Save the file somewhere else" on the computer. What is the solution to this ? Can someone help me out

  • MuVo v100 and subscription servi

    I just received my muvov00 for Christmas and it's my first portable device, I love the way it sounds and it's ease of use. However, when looking for ways to download music off the internet, I find out that it is not compatible with ANY subscription service. This sucks! I'm sure I can find music around here and from friends but I really liked the idea of being able to download an assortment of songs whenever I want to.
    Is there any way around this, something I'm missing?
    Is this something that will change once the muvo v00 gets to be better known, or did I get the wrong mp3 player?
    Thanks for any help!

    brenda625,
    MuvoV00 doesn't work with subscription music services at all.
    If you are going to spend the large amount of money for a music "to go" subscription, why not buy an inexpensi've Creative Player that works with the service. I don't know where you li've, but on the US Creative Store/Savings Center site you can buy refurbished Zen V Plus players 2GB for $35.99US. I have been buying the 2GB Zen V Plus for family and friends?and they have been brand new and work perfectly. You get a three month warranty.
    The Muvo V00 that you own is really good for audiobooks and music that you already have purchased. Another alternati've is to get music CDs from your library system, if you have one. Borrow music from your friends. There are a few Internet?sites that are legal and allow you to download music for free. CNet is one of the ones?that I use.
    luvmyrescuedogs?

  • Muvo v100 and wmp

    I have a problem, went to use wmp to transfer some more songs onto my Muvo and it would up taking 20 songs off. What do I need to do to keep this from happening again? I got mad and used my creative thing to transfer, but I like using wmp for it being easier to use.

    Why not just use Windows Explorer to transfer/manage your MuVo?
    Hold the Windows key and tap the E key, drag & drop the files you want to your MuVo.
    Be sure that you have more than [the Root] Folder too, as there is a filename limitation of about 30 tracks on many Flash dri've players.

  • [Expert] Problem with Muvo² 5Go and firmwa

    When i turn my mp3 player on, it shows first "Creative", then "Muvo?", and stop here. I can't listen to my mp3, can't connect it to my pc because it's not recognize anymore. Somebody has an idea on how to fix this problem?

    A lot of people get the backlight buzz on different MuVo players and it is a hardware "feature" i.e. it can't be fixed by a firmware upgrade.
    Different headphones can make the noise appear worse - looks like the HQ-700 fall into this category. Not much to be said apart from:
    use different headphones.</LI>
    turn off the backlight.</LI>
    Sorry
    PB

  • Muvo TX and MusicMatch Plus for DRM-protected so

    I just bought a Muvo TX and I am trying to use it with Musicmatch Jukebox Plus. For songs that I have ripped from CD, it works fine - MMJB recognizes the Muvo and happily downloads the songs. However, for WMA files that I have purchased from MusicMatch store, I get an error about the song not having "download to portable rights." I have also tried moving songs to the Muvo with the Creative MediaSource application. It gets an error while transferring the DRM-protected songs too. Has anyone got this combination to work? MusicMatch says on its website that it works with Muvo NX, so I optimistically assumed that the TX would be ok too.
    Other info:
    - Windows 98SE, MMJB 9 (latest version)
    - Upgraded to latest Creative MediaSource app 2.03.29 with latest Muvo TX plugin for Win98.
    - Haven't upgrade the firmware of the Muvo TX because when I try to do it, the upgrade program doesn't detect the device.
    - Waiting for response from MusicMatch tech support.
    Thoughts? Suggestions? Thanks,
    -Mike S.

    Jeremy - I think MusicMatch is fully intending to allow songs purchased from them be downloaded into portable players. They specifically say on their website that they support many players including the Creative Muvo Nx - and since the TX is the same thing just with USB 2.0, I thought it likely it would work.
    To just say it's not allowed is probably giving up too easy ... especially since the TX supports DRM and is part of the MS "Play for Sure" program - as is the MusicMatch store. That's the whole idea of this Microsoft program - that songs I buy at online music stores will work with my devices!
    I am still waiting for MusicMatch to respond to my question. Ideally, it seems like it would make sense for Creative to test their devices with the major online stores (MusicMatch, Walmart, etc.). Do you know if this has been done? If so, what combinations are known to work?
    My hope is that I just don't have the right combination of software versions and can upgrade. To find out it can't work would be very frustrating.
    -Mike S.
    Message Edited by msennett on 0-26-2004 05:43 AM

  • I need to hide "water marked" hidden files such as ".DS_Store", ".fseventsd", ".TemporaryItems", ".Spotlight-V100" and so on and so for, how do I get to do so...

    i need to hide "water marked" hidden files such as ".DS_Store", ".fseventsd", ".TemporaryItems", ".Spotlight-V100" and so on and so for, how do I get to do so...

    Open the Script Editor or AppleScript Editor in one of the subfolders of Applications and run the following:
    tell application "Finder" to quit
    try
    if (do shell script "defaults read com.apple.finder AppleShowAllFiles") is not "1" then error
    do shell script "defaults write com.apple.finder AppleShowAllFiles 0"
    on error
    do shell script "defaults write com.apple.finder AppleShowAllFiles 1"
    end try
    delay 2
    tell application "Finder" to run
    If you change your mind later, run the script again.
    (114251)

  • I have a MacBook Pro and the batter icon has an "X" in it.  I attempted resetting the SMC but it's still there. Not sure if the SMC didn't work or I have another problem.  Help?

    I have a MacBook Pro and the batter icon has an "X" in it.  I attempted resetting the SMC but it's still there. Not sure if the SMC didn't work or I have another problem.  Help?

    You can try the SMC again.
    http://support.apple.com/kb/HT3964
    Follow directions for a battery you should not remove yourself
    You can also try a NVRAM/PRAM reset (at the bottom of the same page in the above link
    Also hold the OPTION key and click on the Apple logo in the menu bar and click on system information, in the left column select power. Under the battery info see if it is charging (with the power adapter  plugged in) as well as the health info (condition should be normal), and battery installrd (should be YES)
    If other than these are different you may want to take it in to a Genius bar for a full diagnosis they will do that for dree.
    Hope this helps

  • MuVo V100 playing probl

    I have a muvo v00 and its about 0months old.
    Ive copied loads of songs onto it and its full but when i go to play anything i can only find about 5 songs at most.
    If i plug it into mine or someone elses pc all the songs are ther.
    Does anyone know how to fix this?
    If anyone could help id be really greatful.

    Come on, somebody has to have a clue!

  • Petition: Programable play mode for MuVo V200 (and posibly othe

    I would like to suggest ti include a programable play mode for MuVo V200 (and N200), I mean, a a play mode wich the user could select one-by-one songs on the MuVo and then the MuVo play those songs in the given order.
    Creative may implement this by introducing virtual folders, folders that only contains references to the stored songs, so user could use the existing diferent play modes over those folders.
    I think there's no technical reason that avoids this feature, but I know it may be not simple.
    Thanks.
    PD: Oh, of course I suggest Ogg Vorbis support, I don't care if my battery stands half time (WMV do it also, but no so hard), but I know Creative don't like Ogg Vorbis

    The MuVo's don't have rescue mode, except for the MuVo?.

  • Why muvo v100 slower than t

    I have both a G muvo v00 and a 256M muvo txfm that I copy the same mp3 files to each day from the same computer. I notice that the time it takes to copy the same file is almost 4 times longer with the v00. Is that normal? If not, what could be wrong?
    Greg

    The Muvo V00 does have a slower transfer speed; you're not alone
    Hopefully it will be fixed, but there has been no confirmation.

  • Creative MuVo V100 2GB - USB 1.1 only!

    I recently purchased a 2GB MuVo V00 player in the US. Although both Creative's website and the retail box claim it had USB 2.0 connectivity, when connected to my laptop (which is USB 2.0 enabled) it showed the speed of USB ., which is times slower! It take over hour to fill it up with songs or files. How can it be that a reputable company has false specifications claims everywhere on this product!

    Hello everyoneHere's the message I just sent to Catherina about this lie on the V00 (usb 2.0)in red i put a new comment that is not in the original mail?Hello CatherinaI'm a happy user of the Creative Muvo N200 and I decided to buy a Muvo V00 2go to my girl friend ... but .... what a sad surprise when I saw the speed of the V00.
    Don't lie to me, I saw all the posts on the Internet about this issue with NO answer of Creative [color="#ff0000"](except saying : "it's probably a computer problem, look at?your driver" and else?... I'm not a beginner on computers and I've got a? TX 52, Muvo N200 go, Muvo V200 256mo and I HAD NO PROBLEM AT ALL WITH THEM on HP and Toshiba laptops except this V00!!!)
    I think, as a represtentati've of Creative, you have to answer to everyone clearly about this factIf V00 is USB2 as Creative says, transfer must be quicker. For the same folder size (00mb for ex) it takes about 4.5x much more time to copy on a V00 than a V200 or N200.
    That is really UNACCEPTABLELast thing, I don't see on the support the V00 product choice (only the v200). Why ?Thanx for your time and your answer to me and all the customersSincerely,M. PireddaMessage Edited by spiredda on 2-0-200708:49 AM

  • Double installation : muvo v200 and zenmi

    Hi ,
    I'm new in mp3 player world and i bought one creative player : muvo v200 and installed it correctly;
    In a second time i bought a Zen Micro and i wonder if i must install it with CD or simply connect it ?
    If i install the Zen micro with cd , the first player muvo v200 will be recognizable as it does ?
    And then i can use both players without any problems ?
    thanks in advance for answers
    Christian

    You should always install the software from all your product CDs. Don't worry about double installation. The installation program will know whether to overwrite the files. For example, if the software that came with the Zen Micro is newer, than it will overwrite the same software that came with the MuVo v200. Different product CDs may also install different plugins for your different MP3 players.

  • HT3669 I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

Maybe you are looking for

  • 11.1.2.1 stability problem

    Hi all, Ive installed EPM 11.1.2.1(essbase,planning,HFR) 64 bit on windows xp professional 64 bit. system works fine for sometime, but fails after some time. It starts throwing a sequence of errors. like Description: Invalid or could not find module

  • Is it a bug in SAP?

    Dear All, Our client is using SAP B1 8.8 PL11. Their requirement needs updation of a  field in marketing documents based on the Shipping Type of the Marketing docs. For this, I created a UDF in marketing docs and wrote a FMS that refreshes on the "Sh

  • New computer with ipad2. old computer broken.how can i backup the data?

    old laptop broken. how can i input the data to new labtop with new itune?

  • Dynamic array expansion - Tableau dynamique

    Hello, Sorry for my English, but I go through the online translator of google. I'm new to the forum and starts on Adobe LiveCycle Designer ES2. I'm looking for someone mastering this software to help me modiffier a table in a quotation form. I wish t

  • Another Modification question :)

    ok, my last post was about getting DisplayName from user table and get it into the datagrid. now im trying something similar, im trying to get an extra column with the postalcode in the customers.ascx from the dashboard. i have learned a lot from my