MuVo v100 and subscription servi

I just received my muvov00 for Christmas and it's my first portable device, I love the way it sounds and it's ease of use. However, when looking for ways to download music off the internet, I find out that it is not compatible with ANY subscription service. This sucks! I'm sure I can find music around here and from friends but I really liked the idea of being able to download an assortment of songs whenever I want to.
Is there any way around this, something I'm missing?
Is this something that will change once the muvo v00 gets to be better known, or did I get the wrong mp3 player?
Thanks for any help!

brenda625,
MuvoV00 doesn't work with subscription music services at all.
If you are going to spend the large amount of money for a music "to go" subscription, why not buy an inexpensi've Creative Player that works with the service. I don't know where you li've, but on the US Creative Store/Savings Center site you can buy refurbished Zen V Plus players 2GB for $35.99US. I have been buying the 2GB Zen V Plus for family and friends?and they have been brand new and work perfectly. You get a three month warranty.
The Muvo V00 that you own is really good for audiobooks and music that you already have purchased. Another alternati've is to get music CDs from your library system, if you have one. Borrow music from your friends. There are a few Internet?sites that are legal and allow you to download music for free. CNet is one of the ones?that I use.
luvmyrescuedogs?

Similar Messages

Muvo V100 and my

Hi
SOrry for my english but there is no french community for creativ's product
So I'll will explain my problem as good as I can
I have a mp3 player Muvo V00 and I would like to know if there is an adaptator to plug it in my car cigar lighter.
Thanks

I also have a problem with my Mp3 player Muvo V00 months old, It happened that the mp3 player lost some music files by itself and when I turned it on I could only listen to few songs on it. Afterward, I connected it to my PC but it wasnt responding and the computer system told me that the windows was unable to save all the data for the player ( File H: ), and it showed?" Delayed write faillde, the data has been lost. Save the file somewhere else" on the computer. What is the solution to this ? Can someone help me out

Muvo v100 and Spiralf

I have a (new) Muvo v00. I have loaded some music from when I was using Napster with no problems.
I am trying to use the Spiralfrog service I just learned about. I can drag and drop them, and they show up in the player, but do not play...the numbers do not advance, nada.
I tried to upload the Spiralfrog music via MediaSource 5 as I thought might work from reading the forums and the music won't transfer at all..."error transferring...". ?
I have restored the player with the program on the Creative website and reinstalled the software on the disk.
I am not usually computer stoooopid, but geez, this is frustrating.
Any help (with details) will be much appreciated.
Thanks!
P.S. I bought this this (what I think is a cool little player) to substitue my dinosaur Samsung Napster (printed on the player) YP-90 that Napster no longer supports. I used to be able to buy a single song, add it to a play list through their Napster software and be on my way. Now, they no longer support their own player and sent me pages upon pages of instructions on how to roll back WMP to use it to load music. Bah. Thanks for listening

I also have a problem with my Mp3 player Muvo V00 months old, It happened that the mp3 player lost some music files by itself and when I turned it on I could only listen to few songs on it. Afterward, I connected it to my PC but it wasnt responding and the computer system told me that the windows was unable to save all the data for the player ( File H: ), and it showed?" Delayed write faillde, the data has been lost. Save the file somewhere else" on the computer. What is the solution to this ? Can someone help me out

Muvo v100 and wmp

I have a problem, went to use wmp to transfer some more songs onto my Muvo and it would up taking 20 songs off. What do I need to do to keep this from happening again? I got mad and used my creative thing to transfer, but I like using wmp for it being easier to use.

Why not just use Windows Explorer to transfer/manage your MuVo?
Hold the Windows key and tap the E key, drag & drop the files you want to your MuVo.
Be sure that you have more than [the Root] Folder too, as there is a filename limitation of about 30 tracks on many Flash dri've players.

MuVo V100 and Lithium Batter

MuVo V00 works great on alkaline batteries. However, using an Energizer Lithium AAA the unit will not power up. I tried 2 Lithium batteries without success and both Lithium batteries measured .7 Vdc versus the typical .5 Vdc. I've read that Lithium batteries have a low internal resistance and some devices do not sense the battery. Anyone have any additional info or experience?in this area?Thanks...

I also have a problem with my Mp3 player Muvo V00 months old, It happened that the mp3 player lost some music files by itself and when I turned it on I could only listen to few songs on it. Afterward, I connected it to my PC but it wasnt responding and the computer system told me that the windows was unable to save all the data for the player ( File H: ), and it showed?" Delayed write faillde, the data has been lost. Save the file somewhere else" on the computer. What is the solution to this ? Can someone help me out

[Forum FAQ] How do I disable all subscriptions without disabling Reporting Services and SQL Server Agent?

Introduction
There is the scenario that users configured hundreds of subscriptions for reports. Now they want to disable all the subscriptions, but Reporting Services and SQL Server Agent service should be enable, so the subscriptions will not delivery reports to users
and users could run the reports and create jobs on the server.
Solution
To achieve this requirement, we need to list all subscriptions and their schedules by running query, then use loop statement to disable all the subscription schedules by Job name.
On the Start menu, point to All Programs, point to Microsoft SQL Server instance, and then click SQL Server Management Studio.
Type Server name and select Authentication, click Connect.
Click New Query in menu to open a new Query Editor window.
List all subscriptions and their schedules by running the following query:
Use ReportServer
go
SELECT   c.[Name] ReportName,
s.ScheduleID JobName,
ss.[Description] SubscriptionDescription,
ss.DeliveryExtension SubscriptionType,
c.[Path] ReportFolderPath,
row_number() over(order by s.ScheduleID) as rn
into
#Temp
FROM
ReportSchedule rs
INNER JOIN Schedule s ON rs.ScheduleID = s.ScheduleID
INNER JOIN Subscriptions ss ON rs.SubscriptionID = ss.SubscriptionID
INNER JOIN [Catalog] c ON rs.ReportID = c.ItemID AND ss.Report_OID = c.ItemID
select * from #temp
Use the loop statement to disable all the subscription schedules by Job name:
DECLARE
@count INT,
@maxCount INT
SET @COUNT=1
SELECT @maxCount=MAX(RN)
FROM
#temp
DECLARE
@job_name VARCHAR(MAX)
WHILE @COUNT <=@maxCount
BEGIN
SELECT @job_name=jobname FROM #temp WHERE RN=@COUNT
exec msdb..sp_update_job @job_name = @job_name,@enabled = 0
SET @COUNT=@COUNT+1   P
RINT @job_name
END
PRINT @COUNT
Reference
SQL Agent – Disable All Jobs
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012
Reporting Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

Muvo 200 and compatibility with subscription services (Napster to

Hi
I bought an muvo v200 as a christmas present as it displayed the "plays for sure" logo on the box. However, on reading the documentation and online stuff it doesnt look as if the device is compatible with subscription services.
Can anyone confirm this please...or better still tell me there is a firmware u/g available somewhere. If it isnt going to work, then I am confused by the meaning of the "playsforsure" logo on the box.
Thanks for your help.
DaveBP

None of Creative's memory-based players is compatible with Subscription services. If you look into PlaysFor Sure a bit more you will see that there are 2 parts to it - Download and Subscription.
Creative display the PlaysForSure logo because it is compatible with the Download part of PFS.
PFS was devised by Microsoft and there is more info about it at www.playsforsure.com.
PB

Exporting superscripts and subscripts to ePub file

Anyone know? How can superscripts and subscripts be exported to an ePub file?

Hi John,
A report with saved data can be altered using an updated record selection formula prompt without hitting the DB again.
For example your report returns each Country sales records, You export that to RPT format or save data with report from the designer. Now you can hit the refresh button and if you have a Country Parameter it will prompt and you to use the saved data, do this for each.
Bottom line is CR Designer does not have the ability to export subreports to a unique file in one refresh. You can using the above, export 5 times, one for each subreport. You have to set up the report do filter for each of course.
CR Server and BOE has a feature like this. As well as being able to schedule for each user. In that case though you can simply create a report for each and not bother with subreports.
Thank you
Don

Deploying Windows Server 2012 and Exchange Server 2013

Hi All,
Our Clinet is planning to implement Exchange Server 2013 as an email solution. There is no Active Directory Domain exists in the environment. So, we have planned to configure a Windows Server 2012 R2 Standard as a Domain Controller and Exchange
Server 2013 Standard would be installed on another Windows Server 2012 R2 Standard.
The setup would be for 250 users. Please guide me about the Cost of OS + Exchnage and CAL for 250 Users.
Warm Regards,
Prosenjit Sen
Thanks & Regards, Prosenjit Sen.

Another option would be to consider signing up for Office 365 instead of setting up the hardware and software for such a small number of users. It will take a long time for the cost of the hardware, maintenance, and support to be less costly than Office
365, if it would ever be less expensive. There is a lot of maintenance required for Exchange, so unless your client already has someone experienced in configuring and maintaining Exchange, there is a lot of expense in bringing someone up to speed to
perform those functions capably.
Just a suggestion. I do not work for Microsoft and I have no financial incentive to propose an Office 365 environment. I just know that if I were running my own business, I would have to be convinced that my business required its own internal
mail system when there are so many fully functional and capable mail systems available via subscription.
. : | : . : | : . tim

Issue in Synchronizing with Exchange 2010 Hub and Edge server

Dear Sir,
We have an issue with the installation of Exchange edge server 2010 SP1.
We installed exchange edge server on DMZ but unable to do the subscription between edge server and hub server. Tried to check from the edge server whether the ports (50389 & 50636) are listening. Both are listening without any issues. After the
edge subscription is done and when pass the command start -edgesynchronization we are getting the below error:
Unable to contact the edgesync service.
+catogary :ReadError: (:) [start-edgesynchronization], Endpoint not registered exception
+Fullyqualifiederrorid : FE1A5BE2, Microsoft.Exchange.Management.Edgesync.SyncNowTask
Please help me in rosolving the issue with regards to Edge Server.
Thank & Regards
Suraj Sreekumar

Hi Suraj,
Try to Re subscribe the HUB & EDGE serve, Create XML file on the EDGE server, Removed the Edge subscription from the HUB server and Restart the Transport & ADAM service
Then Ran Start & Test-EdgeSynchronization cmdlet on the Exchange Management Shell on Hub, again Restart the Transport server on the HUB & ADAM service on the EDGE .
White Paper: Edge Subscription and Synchronization
http://technet.microsoft.com/en-us/library/bb310755(EXCHG.80).aspx#EdgeSyncsynchronization
Anil

Dunning report difference in dev,testing and prod server in sap

Hi all..
we are facing a problem while executing the tcode f150 in dev,tsting and production server.
while giving the same run on and identification,the different parameters are coming and the status is geting changed.
in ker,the process is getting compelted,in testing the process is getting sceduled,complete but getting the status as"process completed but job deleted".
and in production,the status like testing server is coming but some tabs(from the too bar where delete,etc lies)are not getting to see,its not showing up.
please tell me if we can check it through some tcodes,or eliminate the eorr.
we are not able to locate the cause behind.thanks in adv.

Hi chandu,
In my previous Organisation we got exactly the same landscape for BW as you described.BCS(BAYER COPSCIENCE LTD) operates a BW System Landscape with one centralized Global Development System and three regional Quality Assurance and Production Systems located in Europe, Asia Pacific and Americas. This Landscape is to ensure consistent data models to be available in all regional systems as well as to minimize development efforts and make use of respective synergies.
This is perfectly working for BCS ,and I think, this is the most approriate way of handling of resources.
Regards
CSM Reddy

Error Message when installing Companion CD for HTMLDB 1.6 and HTTP Server

Hi. First time forum user so bear with me.
I'm not sure if this is the correct forum for this but the assistance of anyone who may be able to shed some light on the problem whould be greatly appreciated. I am having a problem when attempting to install the Companion CD for HTMLDB 1.6 and HTTP Server, details given below:
The following Oracle components have been successfully installed
     Oracle 10gR2 Database.
     Oracle 10gR2 Database patch 10.2.03.
     Critical patch up date (security).
The following Oracle component failed to install.
     Companion CD for HTMLDB 1.6 and HTTP server
Scenario leading up to failure
     Extracted companion CD installation files to D:\oracle\utilities\Oracle_10_2_0_Companion
     Executed D:\oracle\utilities\Oracle_10_2_0_Companion\companion\setup.exe.
The following error message is displayed in a "JAVA VIRTUAL MACHINE LAUNCHER" dialog box
     "Could not find the main event class. Program will exit."
I have been attmepting to resolve this problem for over a week and have already checked the following with no resolution to the problem:
Cause. This issue may have to do with two issues (and may occur more on Windows):-
1. Within the ORACLE_HOME directory full pathname there is a space.
2. The directory from where the software / patch is being installed has a space within the directory full
pathname (where the file for the installation by default is named products.jar or products.xml).
Solution. To implement the solution, please execute the following steps:-
1. Rename the full pathname directory NOT to contain a space.
2. Launch again the OUI... and verify if the problem occurs.
Any further guidance would be greatly appreciated.
Edited by: user10386555 on 03-Oct-2008 02:51

Can you install using OUI from the RDBMS installation? IIRC, there is a problem using OUI on companion to install companion items.

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

How to have one centeral management console for DB and Application server?

Hi
Thank you for reading my post
I read in several places that ORACLE provide facilitis that help developers to have one centeral console to manage Application server / Database and what ever oracle products.
I want to know that, when i have Oracle 10g r2 and Application server 10.1.3.1 installed, how i can use that centeral management console?
is it some other application that i should install ?
or it is just some more configuration?
thanks

What you are looking for is called Grid Control.
You will need the Grid Control Agent installed on each server that has products from Oracle's technology stack installed (database, web server, app server, etc). You will also need install the Grid Control software and repository.
You can download Grid Control from the following link:
http://www.oracle.com/technology/software/products/oem/index.html

Understanding Application and Web Server Integration

Folks,
I am relatively new to web development and have some fundamental questions. I have read various articles and posts on these forums that describe the difference between an Application server and web server but haven't seen any on the integration of the two.
I have recently downloaded the Sun Java System Application Server, built a simple application with a couple of JSPs, servlets and static html pages and deployed it through a deployment tool that came with the application server.
Now, the application is accessible through my browser, so It seems the application server does everything I need, even for serving static pages. Do i need a web server? If so, would I implement a web server for design reasons and host static pages on that? Any hints on how to do this?
Your help is appreciated.
-joe

No you don not. However, if you had a large site, which experienced thousands of hits a minute, you wouldn't want to burden your application server with the overhead of serving static content. Otherwise, go for it.
As far as integrating an application server with a web server, I only have access integrating Tomcat with various web servers and it's not difficult at all. There's another post here (today as a matter of fact) where I give details for Tomcat and IIS.

MuVo v100 and subscription servi

Similar Messages

Maybe you are looking for