MuVo V100 not recogni

I am trying to download a book from the Library. First downloaded Windows Media and then Overdri've Media Console (library ware) ?and was prompted after book downloaded to transfer to Muvo. The device shows that it is working (little jiggles goes on the little screen) but my Laptop XP cannot find the device. I don't have another XP to test it on and when I go to website and test, same thing happens--no download. Any advice? Many thanks,

I have the same problem and tried your recommendation. When I open up "Disk Management" in Computer Management, I get "Connecting to Logical Disk Manager service,"? then, after a long time, "Still connecting, please wait...". These two cycle indefinately. When I pull the MuVo out of the USB port, it immediately solves the problem and I can see the remaining disks.
The MuVo freezes up a range of applciations and shutdown/reboot when connected. The problems always go away as soon as I pull it from the USB port. The MuVo appers in device manager under Disk Dri'ves and USB devices, but not Windows Portable Devices. It seems to appear in Windows Explorer, but clicking on it always results in a player not attached message...even though it obviously is connected. It is not recognized by either Windows Media Player nor the Creative media player. (By the way, it doesn't matter what USB port it is in. )?What do we try next?Tom

Similar Messages

Muvo N200 not recognized by MediaSou

I have a Muvo N200. I downloaded the latest media source software. At first it would not install because it could not find a creative player attached (even though it was). After much troubleshooting I discovered that the creative install program did not play nice if I had other USB devices attached (I have an external hard disk, external DVD burner and a card reader). Once I turned all the other USB devices off then it installed fine. However now that MediaSource is installed it tells me that I have no creative player attached. The player shows up as dri've F in windows and I can read and write to it fine. It also shows up in my old MediaSource software (shows up as Muvo). I have not updated the firmware for this player as I am some reluctant to take the risk that the player will stop working. I see lots of people have problems with firmware upgrades.
Is there something I can do to get MediaSource to see my Muvo N200 player?Any help would be appreciated.

I got my problem fixed. It turns out I also needed the appropriate plugin as well. I sort of assumed it would be all one package but trolling through the forum I found reference to their being different plugins depending on what unit you have. Installing the right plug in fixed the issue.

My muvo nx 128 mb is not recognized by my windows xp and it doesnt turn

Hi,
My muvo player has worked fine for some months and all of a sudden it turned off and on without my
doing it.
When I plug it in to my computer it doesn't turn on and is not recognized. I have tested some other mp3
players and they work ok.
Some times I'm able to turn it on but as I move it turns on again.
Do you think is a circut problem, contact problem. Can it be solved?
Thanks

I can't reapply the firmware as it is not seen by my computer.
It only turns on sometimes when it is inserted in its cover but it turns off right away.
When it turns on it plays ok and but as soon as I move it is off again.
In case it had an internal connection problem , would it be possible to open it without damaging it's
Thanks for yuor reply!

MuVo TX suddenly not recogni

Hello All I'm hoping someone here has an idea. I just tried by MuVo Tx Fm on my WindowsXP computer for the first time after loading the latest drivers. XP deli'vers a message saying the USB device has failed and is nto recognized. When I click on the message, it says no drivers are installed (when I insert my old MuVo CD, . I get a message saying a newer version of the driver is installed,and it terminates) I then plugged it into my Win98 comptuer (the one I've been using with it), and the players does not show up in device manager. The player IS working. I can listen to anything that's already loaded. When I plug it into either computer, I see the connection image on the player LCD screen , although the screen is NOT lit up. Since the player is not recognized by either computer, I cannot upload files (music or otherwise).Any ideas Thanks. Anthony Giorgianni
Message Edited by Giorgianni on -6-200704:28 PM

I got mine woking. This what I did.
First I did not followed the recovery instructions.
If you installed the Device Recovery Mode drivers uninstal and reboot pc.
I did downloaded the MStorage_PCDRV_LB__07_00_250.exe (link is in recovery sticky) just to have the latest drivers.
Plug the MuVo TX FM to your pc usb.
When the install wizards appears do nothing.
Unplug MuVo.
Close wizard.
Plug MuVo again to your pc usb.
Run the firmware update (Go to download section to get it). Gi've it a minute (more or less).
The upgrade process will do something, I don't know what it is that recognizes the Muvo (The Muvo turns on).
Follow instruction on screen.
BTW your Muvo will be formated, keep this in mind if you have important info in it.
I hope this hel
ps.
I went thru a lot of trial and error so I may have missed a step.Message Edited by jibaro009 on 0-09-2006 06:22 PM

MuVo does not show up in "My Comput

I have an Emachines 2.92 ghz system with 024 ram running Windows XP and I do have Adminstrati've rights. I installed the software on my computer as instructed. When I rebooted and then attached the Muvo txfm to my usb port. The Muvo screen shows the moving USB icon as pictured in the instruction manual but it was NOT recognized in "My Computer".
There was something under "Control Panel" called Muvo system folder I think and when I clicked that, it said there was no dri've connected and that I should connect the dri've to the USB port. But it already was connected. I tried another USB port but the system would not recognize it from there either. It is listed in Device manager under dri'ves and there is no question mark or exclaimation mark there or anywhere in Device Mgr. but when I select the dri've to go into "Properties" the computer freezes for about 20 seconds. Then properties opens up and it says "there is no problem with this device." A window came up in my taskbar saying there was a problem with hardware installation so the device may not work properly. I disconnected all usb devices and connected the Muvo again but it doesn't show up. Then I rebooted, attached the device again but still the same problem. Then I unistalled the software and attached the device to the USB port and a window came up saying the hardware was installed and the device was now ready for use but it still is not in "MY Computer" so I am unable to access the device to do anything with it. It is in Device Mgr as "disk dri've" now. Then I deleted the device from Device Mgr and rebooted. I installed the driver update called "MStorage_PCDRV_LB__07_00_250.exe" from your website and then plugged the Muvo into the USB port again and it showed up there as Muvo TXFM but still not in My Computer listing.
I tried to install the Firmware update from your website called: "MuVoTXFM_PCFW_LF__9_0.exe" but because the Muvo doesn't show up in "MY computer" it is unable to find the device and it just hangs as it looks for the device.
OK, now I'm thinking the Muvo is a defecti've player so I plugged it into my 998 Dell computer running Windows Me. with no software installation at all and it showed up in "My Computer" in a matter of seconds. I even put a song on it from the Dell computer. So wassup?
Thanks for your help
P.S. I also did these two registry fixes allowing permissions on both (but they were already set to that anyhow) so it did not fix it:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\U SB
And also I downloaded and installed the three microsoft fixes I found on one of the many posts I read on this forum for media player and something else. I cant remember what, I am just so exhausted!

Connect your player and find its entry in Device Manager. Click on Remove then disconnect player. Also select Show Hidden Devices and remove any extra entries for your player.
Go to Control Panel, Add/Remove Programs and remove the MuVo drivers, Mediasource and Media Explorer software.
Reboot PC and then re-connect player - it should be detected immediately by XP.
Another thing it might be is if you are using a front-mounted USB port on your PC - these don't always supply enough current. They allow the player to be seen but not enough to actually do anything with it.
If you choose View Devices by Connection in Device Manager with the player connected and drill down to find the entry for your player, you can look at the properties for the controller and hub that it is connected to. One of these shows the current equired and the current available.
PB

Muvo n200-not find by

hello
I got a big problem with my muvo N200. When I connect it through usb to pc it's not recognized.the picture which shows that player is connected to pc is not appearing. I can't upgrade the firmware and do anything with usb. I tried this on other pc's and different usb cables....where's the problem?

Try this:?http://forums.creative.com/creativel...ssage.id=23264?Read posts 3 and 4. Several N200 owners have gotten satisfaction from this, e.g.,?http://forums.creative.com/creativel...d=00348#M62247?I occasionally come back here to check on N200 failures, because Creative just won't put this in their FAQ, I guess they feel they have to see it work for themselves. Even the uber-posters won't acknowledge this fix discovered by AB84. Hope it works for you, as it has for several of us.

Device not recognized - Zen Visio

Day 3... I made the mistake of installing WMP beta without updating my firmware on my Zen Vision M player. It has not recognized my player since. I am not able to rollback to WMP0. I did a system restore to a couple days back before the WMP beta install. Shows WMP0, but device still not recognized. I have plugged another MP3 player and a camera into the USB 2.0 ports and they recognize fine. I updated the firmware on another computer - recognized device fine. So, I know the device works, and my computer is the problem. I am running Windows XP - Service Pack 2. At this point, I am out of options. I am assuming I need to edit my registry. Anyone have any suggestions before I chunk this into the trash and get an IPOD? Thanks for any replies.

i find it hard to believe that I haven't got a single reply to this problem, and neither a reply from creative (I've emailed them, and also replied to their automated email).
I've kept trying to test the mp3 player every few hours, and it worked only once since then. Again, when it worked, it worked on all three computers tested.
I really lost my interest in creative products now, so much different from the times of my creative muvo mx.
Is there really no solution? I'll just return it back

USB Device for IPOD not recognized by Windows, whether ipod connected or no

During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
Any suggestions?

I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
This is driving me up the wall. Is there a glitch with iTunes 7?
Can anyone help me out?? Thanks
Windows XP

Aio Remote: PDFs not recognized by Google drive.

Aio Remote on iPad Air2 iOS 8.1.1 - I created a PDF on my iPad from my HP Envy 7640 using Aio remote app. In the files/document section it's there (3 pages) as a PDF. But when I upload a copy from Aio Remote to Google Drive it's not recognized by Google Drive as a PDF even though it has a PDF extention. I have other PDF files stored in Google drive that are perfectly fine. It must be something in your app that is the problem.

More info: if I send it from Aio remote as an email attachment to myself I get a PDF that I can upload to Google drive and Google drive reconizes it as a PDF. again proving it is Aio remote that is doing some thing wrong when uploading to Google Drive.

I recently upgraded to ios7 and now my PC is not recognizing my iphone

I am having several problems. I recently upgraded to ios7 and now my PC (Windows 7) is not recognizing my iphone. 1) I am getting an error message when itunes opens: "Itunes could not connect to the iphone because it is locked with a passcode. You must enter your passcode on the iphone before it can be used with itunes." How did it get locked and how do I unlock it without losing my data? What do they mean by passcode? I don't have a 4-number code to get into my iphone activated. In fact, I've never had a passcode.
2) I cannot download my photos from my iphone onto my computer because my computer doesn't recognize my iphone. In other words, my iphone does not show up on my computer (no iphone icon, no DCIM folder).
3) This is a separate issue but it is also very confusing: I went online to check my iCloud and I cannot see any data (icloud.com). But I know that I set up iCloud when I upgraded to ios7 and it backs up my data every night. What am I doing wrong, am I unable to see my data and photos?
Why is this happening? It was bad enough that when I upgraded to ios7, I lost my Notes - I have no idea why they didn't return. But now essentially my iphone is not recognized when connected to my computer and this is very frustrating. I have read numerous previous postings regarding downloading photos onto the PC and regarding this passcode error and cannot find a resolution, so I would appreciate any help.

No problem!
This will make it easy for you:
http://www.tuaw.com/2011/07/09/quicken-wont-run-on-lion-heres-10-mac-apps-to-cur e-those-blue/

I an getting an error with photo merge in PS cc . It gives me a code tmp00000001 using from photoshop and if I try from bridge it tell me that I need to select more than one image. It is not recognizing the photos I am selecting in bridge. please help. my

A new problem with CS5 forced me to download PScc but the problem is still there. I am getting tmp00000001 in photo merge when importing multiple files from inside PS and if trying from bridge I am getting a pop up box telling me I need to select more than 1 file. Photoshop potomerge is not recognizing my selections from bridge..!! please help.. my knowledge of computers is a 3 on a scale of 1-10

if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:(

IPod nano does not charge & is not recognized by computer or iTunes

I have a 1st generation nano 1 GIG.
It appears "dead."
It is not recognized by My Computer, iTunes or the Ipod Updater (The updater asks that I connect the iPod, which I do). The iPod diagnostics through iTunes also reports that my iPod is not connected.
I have tried my iPod on 4 different machines, with one of them having USB 2.0.
I tried the following from Jeff Bryan. (I don't know if the links from his post have carried over into this post.) So I will list the things I have tried near the end of this post.
- My iPod won't turn on.
- iPod battery doesn't charge.
- iTunes 7 doesn't recognize the iPod.
- Your Windows PC doesn't recognize iPod.
- iPod appears in Windows Explorer but does not appear in iTunes.
- iPod does not appear in iTunes.
- Fast user switching in Windows XP is not supported.
I tried resetting my iPod by switching the Hold button on and off and then pressing Menu and the Select button for 6-10 seconds. I have done this over and over and over.
I have uninstalled the latest iTunes, reboot, reinstall - same problem.
I have stopped the iPod service, plugged in the iPod, but it isn't recognized by My Computer as stated in the Apple Do-It-Yourself Help. I launched iTunes - same problem.
I used the window cleanup utility, reboot, reinstall iTunes, connect iPod - same problem.
I have used the Windows ipconfig utility to change my boot parameters, but still nothing.
If anyone has any ideas, I would greatly appreciate them.
My iPod is just shy of 6 months.
I do have a replacement contract with Best Buy - but I would like to cover all the bases before I succumb to defeat.
Thanks
XP Home with USB 1.1 Windows XP 4 machines, all XP, 2 XP Pro, 2 XP Home, 3 have USB 1.1, 1 has USB 2.0, 2 machines have latest iTune

I'm having the same problem, my ipodnano is about a year old and I can't figure out what to do. I just installed the new itunes on my new laptop with vista premium. I'm desperate for a resolution, do you have any suggestions at all. Any help is greatly appreciated. Thank you

Iphone not recognized by windows or itunes

Can anyone please help me figure out how to resolve this issue? My iphone 4 is not recognized by my PC. My OS is by Vista Home Premium Service Pack 2. I tried the various "device not recognized" troubleshooting to no avail. I tunes is up to date. I even turned off my security sw for a bit to see if there was a third party conflict...all to no avail. There has got to be someone out there who has the smarts to show me how to fix this. Please advise and many thanks in advance!

Jason,
I understand why Apple doesn't cover the water damaged phones under the warranty, but do you know why they don't fix them if the customer is paying? Is it just because they want the people to buy another phone so they can make more money? I guess I just don't get it.
The cost to repair a device and all of its components is more than the cost of a new device.
Other than the article I linked above, this is the part of the warranty/legal forms that would apply:
+"US v1.0+
+Apple reserves the right to refuse+
+service on products that have serial numbers altered, defaced or removed or that are damaged due to+
+accident, abuse, neglect, misuse (including faulty installation, repair, or maintenance by anyone other+
+than Apple or an Apple Authorized Service Provider), unauthorized modification, extreme environment+
+(including extreme temperature or humidity), extreme physical or electrical stress or interference,+
+fluctuation or surges of electrical power, lightning, static electricity, fire, acts of God or other external+
+causes. In such event, Apple may return the product to you without servicing it, and may charge you the+
+Diagnostic Fee."+ from http://images.apple.com/legal/terms/repair/docs/070108aiphoneOOW.pdf
-Jason

5th Gen Ipod not recognized by windows or itunes. Have tried it all. Any Ideas?

Hello everyone. I have a 5th generation Ipod I recently purchased that I'm having what seems to be an common issue. When I connect the ipod to my computer via USB, the Ipod is not recognized in windows or Itunes. Occasionally the Ipod will charge when connected but not always. Though this is the same for the old wire I used and the new one I purchased today. Even when shown charging the Ipod is not recognized and there is no noise that a device has been connected. I have tried the 4 R's (without Restore) which I can't do, chaninging the drive letter, disabling start up software,uninstalling and reinstalling all Apple Software. I have tried connecting to another computer and have gotten the same result. When I check the diagnostic screen on the ipod it shows that a usb cable is detected. I have upgraded all my driver software, disabled and reenabled them. I'm almost 3 hours from the nearest store so that it out of the question. I'm curious if anyone has any other ideas and will try anything you think might be the issue and fix. Thank you for time.

From my experience, the only way you're gonna get a PC afflicted with this disease to work with a 5th gen nano is to roll back to an earlier version of iTunes. Those affected have been exhausted by this ongoing issue. To update or not to update? And I always say never update unless you have to, and turn off all that auto update mess!
I have two core2duo lappies running 32b vista. My workflow dictates 32b fyi. One is acer aspire running itunes v 11.1 (.0.126), 5th gen nano was originally formatted and works just fine on this machine to this day. My other is the bigger badder lenovo thinkpad and the 5th gen will NOT mount using any version of itunes past 11.0 (.1.12) Windows mounts it just fine. itunes is not having it. no shirt no shoes no service.
I have both a 4th and 5th gen nano. The 4th gen works great on both machines, I even successfully tested it with the latest version (11.1.5) before subsequent deletion on the thinkpad! Weird huh? I think my next experiment might be to restore my 5th gen w/ a Mac and theeeeen plug it into PC itunez.
I'm at a loss on the thinkpad. Scanned for intruders. Cut the Lenovo bloat. Executed system and reg maintenance. Took down msconfig to a safe mode + itunes level to attempt to resolve possible sw conflicts but to no avail. NO NO NO. Every single dang port, every time on the thinkpad. Has me feeling like others might get the same treatment by the next itunes update. :|
So in summary for me:
5th gen nano and thinkpad are a NoGo on 11.1^ last working version for me = 11.0.1
5th gen nano is working on an acer aspire 11.1.0 but no way in the world am I updating
4th gen nano is kicking 5th gen nano's @zz so what would make me want to buy a new ipod?

How to reformat Ipod Nano 5th gen when not recognized by Windows or iTunes?

I've done all the steps on the site to correct this problem up until the reformatiing part except I tried to update the driver software but Windows says that it encounters an error when trying to install the new software.
So after going through the steps I noticed that the iPod I just bought was formatted for Mac. It says that in order for me to reformat, I have to restore my iPod in iTunes but since it isn't recognized my my computer or iTunes, I can't do it.
Suggestions anyone?

Hello there, HateKnuckle.
The following Knowledge Base article offers a pretty thorough step-by-step for troubleshooting your issue:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/TS1369
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

MuVo V100 not recogni

Similar Messages

Maybe you are looking for