Muvo V200 1GB. 50 folder li

Hello all.
I have just bought a Muvo V200 GB, upgraded the firmware to the last version (.0.03) and formated it to FAT32.
I have the following problem: If I fill the unit with mp3 in folders (more than 50), the muvo only sees 50 folders. The mp3 in remaining folders cannot be accessed. Regardless of what folders I move, the muvo only sees up to 50 folders.
Any clue?
Thanks.

The newest firmware for the TX FM solves exactly the 50 folder-issue, so I guess the next one for the V200 will do so as well.
Since then you will have to wait and use less folders. Or does it help to use subfolder more often?
I noticed that I am able to put more files in a subfolder (>350) on my TX FM then I can put in the root (<300). Perhaps it is the same thing with number of folders?

Similar Messages

  • Does the muvo v200 1Gb come with a USB cabl

    hi!. i'm planning to buy a v200 Gb and i'm wondering, if i will have to get an additional cable to connect the comp. i'm going to buy it on the internet and the specifications always say that the box containes : the player, the headphones, a battery, a belt, a case, a manual and a install cd. no mention of the cable.
    please help

    I'd like to point out that you can buy a USB 2.0 A/A extension cable if plugging the V200 directly into a USB port is an issue. (like if you don't have ports on the front of your computer)

  • Please can anyone test this for me? V200 and Repeat Folder play m

    Hi
    Does anyone here use the play mode called Repeat Folder?
    I have selected this play mode and it works fine, but how do you
    then change/skip to another folder?
    If I try then the unit gets confused and goes from
    my folder called DireStraits of 2 to DireStraits 2of2
    instead of to U2 2 of 2. Sometimes I can get it to skip
    to another folder by scrolling in the other direction but
    basically it does not allow me to skip to another folder.
    So, what I have to do is change to Normal mode say,
    then skip to another folder (which works just fine) and
    then turn the play mode back Repeat Folder.
    I think this is a buglet?
    Can anyone else confirm this behaviour or confirm that they
    get normal behaviour once the play mode is set to Repeat Folder.
    Thanks in advanceMessage Edited by will77 on 02-02-2005 0:47 AMMessage Edited by will77 on 02-07-2005 06:44 PM

    elmulti wrote:
    Hi will77,Can you describe what happens if you are in "repeat-folder" mode and select "skip folder" and then scroll to the left or right?
    Thanks a lot. Yes. if I scroll right then it goes to the next folder (sometimes) or
    jumps a folder or misses one or goes nowhere sometimes, and if I select the folder
    it does go to, then it show the track name, but I cannot play it, hitting play
    pause play does nothing. If I scroll to the left then I sometimes can get to the folders
    it does not show when I scroll right, but again, if I select the folder presented to me
    the track will not play. Also I think sometimes it gets confused and does not know whether
    to scroll along folder by folder or scroll along track by track within a folder.
    Any ideas?
    Any MuVo V200 users out there then?
    Thanks in advance.

  • MuVo v200 cannot transfer mp3 f

    I have a GB MuVo v200 player. I have so far used up 508mb of my disk space and have 486mb free space.However, when I try to transfer another mp3 file by drag and drop method, the error message appear: Cannot create or replace (filename). The directory or file cannot be created.
    Can somebody please help .

    I also have a MuVo V200 GB MP3 Player and have the same problem. I get the "Cannot copy {Song name}: The directory or file cannot be created" message when I try to drag and drop the song. I have 42 MP3s and WMAs taking up 535MBs. I also get an "Access denied" message when I try to create a new folder, and a write-protection message when I try to drag and drop one in (One without music). I've also tried to move the music over in the Creative Organizer whoever get "An error occured" message. I also can't create a new folder on my MP3 Player in the organizer using the "New" button.
    Any help would be much appreciated.
    Thanks,
    Dynamite_Kid

  • Muvo V200, question about the play m

    Hello,I have a question about the play mode on my V200. I want to play the songs in a specific order (like in a playlist) but I don't find the way to do this. Can you help me please ?
    Thanks
    (sorry if I don't speak english very well, but I'm french )

    Hi!
    To get the tracks to play in a specific order, put numbers at the beginning of each file name. E.g.: file 'examplesong.mp3' would become '0_ examplesong.mp3' Don't spend years doing that manually though; the computer will do it for you! Click on 'my computer', then click on 'Muvo V200 media explorer'.. This shows the contents of your player. Choose the folder that you want to reorder the songs in...
    ( it's best to put the songs in folders, like you would in a floppy disk, as the muvo can only hold a certain amount in the root directory, and folders are great for organisation - eg: you can put one CD in each folder, and then the player will play all of the tracks in that folder before moving on to the next one )
    ...and click on it to display the songs. In the pictures along the top of the window, 4th from the right is an icon with a downward facing arrow and an A above a Z. Click on this, it's called 'custom sort'. You can then use the arrows at the bottom to change the order of your tracks to how you want them. Click OK, and they'll all be numbered (and so will play) in that order.
    Hope that helps!
    x

  • Muvo V200 vs. Muvo TX

    What are the differences between the Muvo V200 and the Muvo TX FM? Thanks.

    I tested both a long time when I bought one. With the SAME earphones the 200 seems to have the better radio sound and the TX FM the better MP3 sound. The earphones at the 200 seem to be a bit better.
    Better in all this cases really means a very marginal difference. Without direct comparison it would be impossible to say this or that is better. I finally bought the TX FM since I mostly listen to MP3. But the FM sound is great too. On the other hand MP3 quality is a problem anyway...and FM quality anyway too... In both cases CD sound is not possible...
    If you really want to check the quality take a WAV file. Creative says the players don't play wav but only MP3 or WMA. Just but the WAV file in the folder Voice and it will play. Then compare the wav file to the same MP3 file. It will show you what your player really can and MP3 not...
    The functions for both players are the same - so at least I could not find any difference.
    I am very happy with my player - so I bought a second one for my girlfriend. Look for a bigger memory size. 52 should be enough - at least for me it is almost too much. The price difference between the sizes is not so huge anymore but the real benefit is!!!
    Battery life is great.
    The earphones are a bit big - at least for the small ears of my girlfriend.
    Don't lose the battery lid - it tends to go a different way than the player...
    One more thing. Check the version of the player software and try to get the latest update. A player with version .2 has some problems. Update to .3. The update is easy. Just plug in the player and start the downloaded file and for the rest you will be asked for. Nothing to panic!Message Edited by stindlpeter on 02-03-2005 :46 AM

  • The MuVo V200 beltclip is a joke, Now I have no player. What Can I

    Hello all, I'm very disappointed with the Muvo V200 Beltclip. I have had my Muvo since the 9th Jan 2005 and have been using it all the time and had no problems with it what so ever. But yesterday I had taken my player out with me. I had it connected to the beltclip as always. I had taken my headphones out of my ears when I was asking some bloke a question and did not but them back in till about 0 minutes later. When I put them back in I went to turn my player on, But I could not feel it, I look on my belt and all that was there was the dark grey clip that held the player to the belt. I still had the head phones but they must unplugged when the player fell. I retraced my steps but I had no luck finding my player.
    All I have now are the Headphones and a dark grey clip, But looking at the dark grey clip there is a hole at the back, which I think something should have been there.
    So as you can imagine, I'm very disappointed. What I would like to ask is, Is the loss of my player covered by the English Warranty?
    Because I do believe the Beltclip had failed, letting the player fall from my belt. I done my best to find it, but as I said, to no luck.
    All thats left now is the part of the clip and the headphones.
    <IMG height=295 src="http://thegooddrmartin.co.uk/images/image.jpg" width=35>
    sorry for the poor pic (taken on my phone)Message Edited by DrMartin on 04-04-2005 0:42 AM

    On the day it happened I was wearing a shirt that covered the top part of my jeans, So only the headphones would have let people know Im carrying a player, If someone was to take it, the only way to remove it would be to lift it, but I still had the clip part of the holder. If someone did take it by ripping it off I would have known about it.
    Ok as for it not disconnecting from the headphones I don't know, My headphones did not fall with it, and I did not feel it falling. What I do know is that I have lost my gig V200.
    I will phone Creative first thing Monday, But what I was looking for here was someone who might have had the same thing happen with the V200 or another MP3 player, and did the Warranty cover it's

  • A Problem With Muvo V200 !!

    Hi everybody, I've bought a Muvo V200 GB, and it works well , less one thing:
    When the blue light is activated I feel a very "high-pitched" sound, and it's very unpleasant.
    Can somebody tell me if there is a firmware that fix that problem ?
    I've tried to format the usb flash but I still have this problem. And I've also seen some posts in other forums that complain about that.

    No, the problem is with the V200 hardware itself, not the headphones. But using a higher impedance phone results in this high frequency noise being greatly attenuated. Being a hardware issue, there is no possible firmware fix for this. The only option is to go to a higher impedance phone (the Koss KSC-75 sounds great and is available for $5 from amazon.com) or li've with the problem. You can of course set the player to have the backlight always off - this will also eliminate the problem except at startup but will make adjustments more difficult in the dark.

  • MUVO V200 Help Required

    Hi,
    I recently purchased a MUVO V200 with 52 mb memory.
    My first problem was the FM radio would not work, but I have since put this down to it requiring more power from the batteries than standard music. Bit of a pain as my rechargable batteries, even when fully charged won't allow the FM radio to work. Is this normal?
    My main problem; is since reformating the dri've and loading new firmware, the player will only store 00 songs, the packaging advises 256 songs. Can anyone explain if there is anything I can do to enable me to load more songs.
    Any advice would be appreciated.
    Thanks
    James

    I have Uniross 770mAh, Energizer 850mAh and Hahnel 900mAh, all .2V and all work fine.
    You can convert the files you have to a different bit-rate using the Audio Converter function of MediaSource that came with your player. If you use MediaSource to rip your CDs then you can set it up to rip at a lower bit-rate right from the start.
    MediaSource and V200 Media Explorer also have a SmartFit function where the files can be reduced in size as you transfer them to your player, though this slows down the transfer process and you would have to do it again if you reloaded the same files again at a later date.
    If these are files from an online music store then you probably can't convert them directly because of the license issues, but you can burn them to an audio CD then re-rip them at a lower bit-rate. If you use a CD-RW then you don't end up wasting a load of CD-Rs.
    PB
    Message Edited by PeeBee on 0-27-2006 05:09 PM

  • MUVO V200 - Disk Drive is F

    I am having a problem with the disk space of my Muvo V200.
    The capacity is GB but yesterday when I tried to copy 600MB of mp3 files I got the message that disk dri've is full.
    The player was empty. I formatted it but there was still the same problem. There was not any hidden file in my player of in the files that I tried to copy.
    I am starting to copy the files and when I receive this message I go to the properties and it says that I have USED SPACE:540MB and FREE SPACE:453MB.
    Despite that I cannot copy all my files.
    Does anyone knows wht is going on?
    Thank you.
    ArisMessage Edited by aris on 0-3-2006 07:34 AMMessage Edited by aris on 0-3-2006 07:35 AM

    Please read the FAQ - this is covered there.
    PB

  • Mac Mini and MuVo V200 problem

    I have Mac Mini .83 a few months now. Yesterday, I've, for the first time, tried to connect my MuVo V200 via USB. The problem is that Mac simply can't see MuVo at all!!! With other devices I have no problem. What I suppose to do?
    Thanks anyone who can help?

    Did you have the Mac before you bought the Muvo V 200? You should have read the box and listed requirements,if you bought this yourself. Below are the minumum requirements for the Muvo V 00 or 200.
    Intel Pentium II 350MHz or AMD K6 -2 450MHz http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif Microsoft Windows 2000/XP http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 28 MB RAM http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 70MB free hard disk space http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif CD ROM Drive http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif USB .
    luvmyrescuedogs

  • Muvo V200 Starts up for one second and then shuts do

    Hi,
    I bought my Muvo V200 two weeks ago and was delighted with the quality. Yesterday I went to use it and it starts up to reveal the Creative logo and then shuts down straight away. Now the computer wont recognise it either (although a graphic does appear on the muvo screen saying that it is connected to the computer). Ive tried updating the firmware but the installer gets errors. What do I do?

    Other people have had the same trouble so I don't think it's because you're in an Internet cafe, but it would be better if you had access to a PC that you could install the drivers onto. Without them you can't get into Recovery Mode.
    Perhaps someone in the Internet cafe would logon as an Admin for you so that you could load the drivers and carry out the firmware reload?
    Have you not got access to another PC?
    PB

  • Soft screeching sound on Muvo V200 when backlight is on

    Um, anyone pls help me... I just bought my Muvo V200 and the first time I on it, there's a soft screeching and disturbing sound.. But when the backlight off, the sound disappears.. When i press a button, the backlight ons and the same screeching sound comes out... The sound is like (YEEEEEEE)... PLease reply to me asap anyone.. Thanks.

    Just disable the backlight if the sound bothers you. It is very easy. Just set the backlight time to zero. Using 32 ohm earphones rather than 6 ohm ones might make the backlight noise almost inaudible if you find a need to use the backlight.

  • MuVo V200 C

    My MuVo V200 just broke and now I see that there the one part is only fixed on _three very little_ points to the other part (I'm talking about the frontside and backside of the player/stick part). Do you have an explanation for this?!
    I'm really disappointed!
    Yours
    nightwolf

    Anyway has this question ever been answered... ? I doubt anyone from creative is assigned to watch this column... ? right Creative ?
    I am having a similar experience in nature... my daughter realised that her v200 had a 'Crocodile Mouth" at one side, upon curious which I am glad relected from a "Teen', she realised that the mouth can easily be stretched quite wide, afraid that it may conveniently allows water entry, she had called Tech Support, replied is to bring the device to them for review.
    I believe she "WAS' glad when they said so, but all is changed now as she had came to understand that nothing bought can be returned easily... they first conveniently claim that she might had dropped (as she honestly admitted she did dropped it once) and blamed the splitting mouth to the droppage... I had later phoned in to clarify that the incident occurred in my carpetted office location...
    Then they suggested that they are willing to let her purchase a brand new set after taking back her ex v200 @ $45.00.. I later called them to explain my mathematical understanding that to take my device and topped up $45.00 means to say they are taking my device back, recondition it and sell it brand new while still making another $45.00 from me (The Sucker).. They then say that it is for documentation fees instead.. I then suggest looking at their warrantee obligation to us which was published publicly.. they argue that there are small prints that they are unable to show to public with regards to qualification to an exchange for faulty equipment, I requested but Creative had conveniently declined...
    Anyway, I do not wish to create an issue over a PEANUT matter.. I would like to suggest that Creative at least publish clauses accordingly in order to educate users on the gray area of your warrantees... Service center was busy when my daughter visited in the afternoon... your staff should be more professional as my matter took 4 hours to conclude...
    Very interestingly, Creative had took my device in for "FORENSIC" investigation, this is to prove that the device had came to this state under abnormal usage... this of cos will not be immediate as expected...
    I will await patiently as I think the Technical Support had lost total cool in handling the matter when she starts leaving behind her name "Huitin" and Serial Number "05xxxx" and telling me to file official complaint if I am not happy with the handling methods.. maybe good professional staffs are really difiicult to come by...

  • Zen MuVo V200 problem

    My sister has the GB Zen MuVo V200 and hasn't filled the capacity yet, but the player won't allow her to put any more songs onto it.
    It pops up a message saying that: "Your Music Library is corrupted and cannot be recovered. MediaSource will now revert to your most recent back-up available. Would you like to continue? Yes/No."
    Even if I click Yes or No, I need to download some Microsoft jet pack software, I haven't a clue what it is!
    I checked the properties of the player, and it says that 604MB is used space, and the free space is 389MB, so I should be able to put more songs on there. I am confused as to where the space has disappeared to. When trying to transfer songs, an error message pops up and says there is a transfer error has occured while transferring this file, and so it cancels the transfer. I think it has something to do with the amount of space, but I am not sure.
    Sorry to be of a nuisance again, but is there anything that I can do?
    Thanks again,
    Vanessa.

    plum_juice0 wrote:
    My sister has the GB Zen MuVo V200 and hasn't filled the capacity yet, but the player won't allow her to put any more songs onto it.
    It pops up a message saying that: "Your Music Library is corrupted and cannot be recovered. MediaSource will now revert to your most recent back-up available. Would you like to continue? Yes/No."
    Even if I click Yes or No, I need to download some Microsoft jet pack software, I haven't a clue what it is!
    I checked the properties of the player, and it says that 604MB is used space, and the free space is 389MB, so I should be able to put more songs on there. I am confused as to where the space has disappeared to. When trying to transfer songs, an error message pops up and says there is a transfer error has occured while transferring this file, and so it cancels the transfer. I think it has something to do with the amount of space, but I am not sure.
    Sorry to be of a nuisance again, but is there anything that I can do?
    Thanks again,
    Vanessa.
    As SSR has said, the PC Music Library error is a MediaSource problem.
    The reason that you haven't managed to fill up your player is covered in SSR's FAQ post. Look for a section titled "I can't seem to fit any more files on my flash player yet I have free space, why?".
    PB

Maybe you are looking for

  • Two questions about my new Mac Pro

    Just got my new Mac Pro up and running and have two questions (issues) First, I had to buy the DVI to ADC Display adapter to hook up my Cinema Display but now I can't turn the computer on from the monitor like I use to. Is that right? It's no big dea

  • Why does iPhoto Screen Saver say "The selected source contains no pictures"?

    After upgrading to Lion, I noticed that I can no longer use iPhoto albums as a screen saver. At first when loading the Screen Saver preference page, the iPhoto Screen Saver doesn't show up at all. After a bit, I can see "iPhoto" as an option, but if

  • TDMS viewer not showing data with time stamp

    Need help with time stamping data in a TDMS file generated by DAQ Assistant. When I use the TDMS Viewer, with the x-scale set to absolute time, the date starts at 1903. If I use Excel to look at the file the start time is correct (i.e. 2013). Solved!

  • Storing HK character in Oracle 8.1.6. via ODBC driver

    Hi, I came to a problem about storing the HK government defined characters in the Oracle 8.1.6 via the Oracle ODBC driver. Help of any kind is welcome. Character set : ZHT16BIG5 OS : English Win NT with Richwin installed Details: The HK characters wo

  • Telephone Directory in CME..

    Hi, I have implemented CME / CUE in three locaitons connected through WAN. I can call anyone in the Network. I need to create a Directory where i can see the Names with there Telephone Numbers. I should see all three branch telephone entries maped wi