MUVO V200 Help Required

Hi,
I recently purchased a MUVO V200 with 52 mb memory.
My first problem was the FM radio would not work, but I have since put this down to it requiring more power from the batteries than standard music. Bit of a pain as my rechargable batteries, even when fully charged won't allow the FM radio to work. Is this normal?
My main problem; is since reformating the dri've and loading new firmware, the player will only store 00 songs, the packaging advises 256 songs. Can anyone explain if there is anything I can do to enable me to load more songs.
Any advice would be appreciated.
Thanks
James

I have Uniross 770mAh, Energizer 850mAh and Hahnel 900mAh, all .2V and all work fine.
You can convert the files you have to a different bit-rate using the Audio Converter function of MediaSource that came with your player. If you use MediaSource to rip your CDs then you can set it up to rip at a lower bit-rate right from the start.
MediaSource and V200 Media Explorer also have a SmartFit function where the files can be reduced in size as you transfer them to your player, though this slows down the transfer process and you would have to do it again if you reloaded the same files again at a later date.
If these are files from an online music store then you probably can't convert them directly because of the license issues, but you can burn them to an audio CD then re-rip them at a lower bit-rate. If you use a CD-RW then you don't end up wasting a load of CD-Rs.
PB
Message Edited by PeeBee on 0-27-2006 05:09 PM

Similar Messages

  • HELP!!! MuVO V200 Fat32 NO RESPOND

    I have big problem. I have MuVo V200 and i format it using FAT32. My Mp3 no responding. I can't format it to FAT/FAT6. My?system:?WINDOWS XP SP2. PLIZ HELP
    !!! My mail: [url=mailto:[email protected]">[email protected][/url]

    Try putting the V200 into Recovery Mode first. This is done by holding the play button and then connecting the V200 to your PC via the USB port.
    When it is in Recovery Mode then try loading the V200 firmware.
    To put it into Recovery Mode you might need these drivers:
    http://uk.europe.creative.com/suppor...ame=Windows+XP
    Download and install these to your PC first.
    PBMessage Edited by PeeBee on 08-22-2005 05:36 PM

  • Help!! Dead MuVo V200

    I recently brought MuVo V200 G
    And I have on the screen this message "file sis eror" then it shut down
    I try to connect on usb but my computer did not detect this hardware
    so i could not format or do anything
    Then I try on laptop and...nothing same result (
    Pls i'm desperate HElp me I have this device for only a day and
    now is not working ....
    Any sugestion is good PLESE

    go back to the shop and get a new one, I think I read somwehere that you can get a new unit free of charge within a certain amount of time from day of purchase, might be mistaken though.

  • Mac Mini and MuVo V200 problem

    I have Mac Mini .83 a few months now. Yesterday, I've, for the first time, tried to connect my MuVo V200 via USB. The problem is that Mac simply can't see MuVo at all!!! With other devices I have no problem. What I suppose to do?
    Thanks anyone who can help?

    Did you have the Mac before you bought the Muvo V 200? You should have read the box and listed requirements,if you bought this yourself. Below are the minumum requirements for the Muvo V 00 or 200.
    Intel Pentium II 350MHz or AMD K6 -2 450MHz http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif Microsoft Windows 2000/XP http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 28 MB RAM http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 70MB free hard disk space http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif CD ROM Drive http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif USB .
    luvmyrescuedogs

  • Soft screeching sound on Muvo V200 when backlight is on

    Um, anyone pls help me... I just bought my Muvo V200 and the first time I on it, there's a soft screeching and disturbing sound.. But when the backlight off, the sound disappears.. When i press a button, the backlight ons and the same screeching sound comes out... The sound is like (YEEEEEEE)... PLease reply to me asap anyone.. Thanks.

    Just disable the backlight if the sound bothers you. It is very easy. Just set the backlight time to zero. Using 32 ohm earphones rather than 6 ohm ones might make the backlight noise almost inaudible if you find a need to use the backlight.

  • MuVo v200 cannot transfer mp3 f

    I have a GB MuVo v200 player. I have so far used up 508mb of my disk space and have 486mb free space.However, when I try to transfer another mp3 file by drag and drop method, the error message appear: Cannot create or replace (filename). The directory or file cannot be created.
    Can somebody please help .

    I also have a MuVo V200 GB MP3 Player and have the same problem. I get the "Cannot copy {Song name}: The directory or file cannot be created" message when I try to drag and drop the song. I have 42 MP3s and WMAs taking up 535MBs. I also get an "Access denied" message when I try to create a new folder, and a write-protection message when I try to drag and drop one in (One without music). I've also tried to move the music over in the Creative Organizer whoever get "An error occured" message. I also can't create a new folder on my MP3 Player in the organizer using the "New" button.
    Any help would be much appreciated.
    Thanks,
    Dynamite_Kid

  • Muvo V200, question about the play m

    Hello,I have a question about the play mode on my V200. I want to play the songs in a specific order (like in a playlist) but I don't find the way to do this. Can you help me please ?
    Thanks
    (sorry if I don't speak english very well, but I'm french )

    Hi!
    To get the tracks to play in a specific order, put numbers at the beginning of each file name. E.g.: file 'examplesong.mp3' would become '0_ examplesong.mp3' Don't spend years doing that manually though; the computer will do it for you! Click on 'my computer', then click on 'Muvo V200 media explorer'.. This shows the contents of your player. Choose the folder that you want to reorder the songs in...
    ( it's best to put the songs in folders, like you would in a floppy disk, as the muvo can only hold a certain amount in the root directory, and folders are great for organisation - eg: you can put one CD in each folder, and then the player will play all of the tracks in that folder before moving on to the next one )
    ...and click on it to display the songs. In the pictures along the top of the window, 4th from the right is an icon with a downward facing arrow and an A above a Z. Click on this, it's called 'custom sort'. You can then use the arrows at the bottom to change the order of your tracks to how you want them. Click OK, and they'll all be numbered (and so will play) in that order.
    Hope that helps!
    x

  • Muvo v200 earpho

    hello, a year ago?i bought the muvo v200 player, which came with some white earphones. These had the best sound of all phones i've heard so far! Unfortunately my phones broke, so i bought some Sony's, but they don't come even close?to the sound quality and efficiency of the original creative ones.So my question is, where can I get these white Creative phones? or what is their model number?Or can I?return just the phones (because I don't want to be without my player)?thanks for any help!-J.M.

    Is this the one you have?
    http://www.creative.com/products/product.asp?category=437&subcategory=44&product=70 8
    Jason

  • MuVo V200 Player suddenly dead and USB device er

    My player MuVo V200 seriousely problem, suddenly dead after I was reload firmware and repair the storage driver, the USB could not read anymore in my computer, can you help me please !!!

    Connect the player in Recovery Mode and reload the firmware again. Maybe try an earlier version - see the link in my signature line. PB

  • MUVO V200 FILE SYSTEM ER

    I know i don't have a recent product but maybe someone can help me.. I have mp3 muvo v200 and when I try to turn it on it only appears "file system error" and then it turns off. I can't switch it on anymore.. I inserted the usb port in my pc and noticed that all the songs where in the memory anywhere. I tried to format?the disk but nothing happened...does anyone have any suggest? how can I make it work again?please help me! thank you for your attention!

    You need to get the firmware from Support->Downloads and then run it to reload it onto your player. During the reload click the Format Data Area option and all will be well again. PB

  • Muvo V200, it's broken

    Hi all,
    I have a Muvo V200 buyed in December 2005. One day it was doing its work...the day after, when i plugged it in my laptop USB port it started to go crazy!
    The OS find my muvo V2oo but after second a message say it has been removed. Then a new message says the muvo is plugged in, and a second after the same message says the muvo v200 is removed....so long.
    What can i do?
    Please, please, help me

    latinus,
    Have you try updating the firmware? If not, give it a try first. If all else fail, you need to get in touch with Customer Support.
    Jason

  • MuVo V200 not detected on

    And I have on the screen this message "file sistem error" then it shut down
    I try to connect on usb but my computer did not detect this hardware so i could not format or do anything Pls i'm desperate HElp me I have this device for only a day andnow is not working .... I try to restore with your soft MuVoV200_PCFW_L4__0_03 but it still doesn't detect MuVo V200 then I think my usb is broken and I went to a friend and try there...same result then I try to laptop Brand Averateg and get the same result **bleep**... It must have a problem but I could not understand what...Please if you can help me with any advice deosn't matter how complicated I will try to submit your indication...Many Thanks in Advance

    Hi there.. encountered the same problem also. And I've got a solution from creative techinical support and it works..
    http://us.creative.com/support/kb/ar...p?l=3&sid=4656
    Cheers,
    Eunoshishi

  • MuVo V200 "dead" after updating firmw

    I have a MuVo V200 and i tried to update it with MuVoV200_PCFW_LF__05_02.exe following the installation details provided.
    Everithing seemed ok but now the player is dead: it doesn't turn on by battery nor by usb... i tried to apply the firmware again but is impossible 'cause the player is not found in the usb dri've.
    What can i do? Plz help me...
    PS: is there a way to avoid the pause between two tracks? It's pretty annoying with cd registered in a li've...

    Also in terms of gapless playback, about all you can try is encoding the tracks with no ga
    ps.
    For more see the "gapless playback" link in the FAQ post.

  • Muvo V200 1GB. 50 folder li

    Hello all.
    I have just bought a Muvo V200 GB, upgraded the firmware to the last version (.0.03) and formated it to FAT32.
    I have the following problem: If I fill the unit with mp3 in folders (more than 50), the muvo only sees 50 folders. The mp3 in remaining folders cannot be accessed. Regardless of what folders I move, the muvo only sees up to 50 folders.
    Any clue?
    Thanks.

    The newest firmware for the TX FM solves exactly the 50 folder-issue, so I guess the next one for the V200 will do so as well.
    Since then you will have to wait and use less folders. Or does it help to use subfolder more often?
    I noticed that I am able to put more files in a subfolder (>350) on my TX FM then I can put in the root (<300). Perhaps it is the same thing with number of folders?

  • My Muvo V200 Does Not Star

    Hi I am a computer developer and an expert Programmer, I Wanted to Upgrade My MP3 Player's firmware but my computer went off in the middle!! then my mp3 player turned off and now it is not getting recognized by the computer and i can not turn it on! if there is any maintainance program which can force my player to freshen it's program tell me so.
    AND ABOUT THAT FIRST REPLY:
    But, I AM NOT A NORMAL USER!!!! I AM AN EXPERT PROGRAMMER!! and i know a lot about these stuff! just if there is a cure tell me! Somebody else have got this either and he has a note:
    "I once had a similar problem with my <FONT color=#cc0000>Creative MuVo V200 Flash MP3 Player. It worked, but I chose to "upgrade" its firmware and due to a bad USB connection it wouldn't boot up later. It didn't even show up as a USB storage device when connected."
    Looks like his problem has been fixed! Please help me! i need help instantly, because i need my player now.
    Message Edited by arpanah on 0-30-2006 02:45 PM

    If the firmware download was interrupted unfortunately the only way to fix the player is directly reprogramming the ROM, which is beyond what a user can do. You'll most likely have to pay for Creative to repair the player.

Maybe you are looking for

  • How to set the size of mutex region?

    I am using a berkeley xml db on a CMS system. The server's memory is 562M. When more than 80 users visited the system (without setting the environment configuration of berkeley DB), the berkeley db got the following errors: unable to allocate memory

  • IPhoto dissapeared from my icons at the bottom of my screen

    I was using iPhoto yesterday, I got out of it and then tried to get back in.  But the Icon was gone at the bottom of my screen (the area that you move your mouse to and all the Applications etc... pop up) So I opened the Finder window and clicked on

  • Hierarchy in the free characterstics

    Hi! I have a info object on which hierarchy was build and it is included in the free characterstics section. When I run my report and select a parent node and not assigned node in the hierarchy my report is saying no applicable data found. When I Kee

  • Excel line formatting very ugly in PDF

    In converting Excel to .pdf I am noticing a formatting issue with dotted lines, which turn into thick dashes as displayed below. Can anyone suggest a solution? Thanks. I am trying to

  • Re: assets processing

    Hi Gurus, Good afternoon to all, I have a problem the auditing is finish in our company there is a value adjustment of a fixed asset the value in as03 & s_alr_87011963 is - 1,000,143.00 for 31.12.2008 but if i see the value in financial statements s_