MuVo v200.Is it possible in future firmwa

Is it possible in future firmware to add some information to mp3-players display? For example, when I listen music, I want to know, what bit rate is. There is a place, near the indication of accum charge, so it's will be great if Creative put here information about bit rate
Thank you.

Agreed, this would be a good idea with any of the players. My old Rio 500 USB player did this, and it was very useful.

Similar Messages

MuVo V200 "dead" after updating firmw

I have a MuVo V200 and i tried to update it with MuVoV200_PCFW_LF__05_02.exe following the installation details provided.
Everithing seemed ok but now the player is dead: it doesn't turn on by battery nor by usb... i tried to apply the firmware again but is impossible 'cause the player is not found in the usb dri've.
What can i do? Plz help me...
PS: is there a way to avoid the pause between two tracks? It's pretty annoying with cd registered in a li've...

Also in terms of gapless playback, about all you can try is encoding the tracks with no ga
ps.
For more see the "gapless playback" link in the FAQ post.

A Problem With Muvo V200 !!

Hi everybody, I've bought a Muvo V200 GB, and it works well , less one thing:
When the blue light is activated I feel a very "high-pitched" sound, and it's very unpleasant.
Can somebody tell me if there is a firmware that fix that problem ?
I've tried to format the usb flash but I still have this problem. And I've also seen some posts in other forums that complain about that.

No, the problem is with the V200 hardware itself, not the headphones. But using a higher impedance phone results in this high frequency noise being greatly attenuated. Being a hardware issue, there is no possible firmware fix for this. The only option is to go to a higher impedance phone (the Koss KSC-75 sounds great and is available for $5 from amazon.com) or li've with the problem. You can of course set the player to have the backlight always off - this will also eliminate the problem except at startup but will make adjustments more difficult in the dark.

Muvo V200 vs. Muvo TX

What are the differences between the Muvo V200 and the Muvo TX FM? Thanks.

I tested both a long time when I bought one. With the SAME earphones the 200 seems to have the better radio sound and the TX FM the better MP3 sound. The earphones at the 200 seem to be a bit better.
Better in all this cases really means a very marginal difference. Without direct comparison it would be impossible to say this or that is better. I finally bought the TX FM since I mostly listen to MP3. But the FM sound is great too. On the other hand MP3 quality is a problem anyway...and FM quality anyway too... In both cases CD sound is not possible...
If you really want to check the quality take a WAV file. Creative says the players don't play wav but only MP3 or WMA. Just but the WAV file in the folder Voice and it will play. Then compare the wav file to the same MP3 file. It will show you what your player really can and MP3 not...
The functions for both players are the same - so at least I could not find any difference.
I am very happy with my player - so I bought a second one for my girlfriend. Look for a bigger memory size. 52 should be enough - at least for me it is almost too much. The price difference between the sizes is not so huge anymore but the real benefit is!!!
Battery life is great.
The earphones are a bit big - at least for the small ears of my girlfriend.
Don't lose the battery lid - it tends to go a different way than the player...
One more thing. Check the version of the player software and try to get the latest update. A player with version .2 has some problems. Update to .3. The update is easy. Just plug in the player and start the downloaded file and for the rest you will be asked for. Nothing to panic!Message Edited by stindlpeter on 02-03-2005 :46 AM

MuVo V200 Russian ID3

Is it possible to make MuVo V200 read ID3Tags in Russian?

I have the same problem... I've bought this player recently with latest firmware .05.02.And it can't recognise russian tags But with russian filenames all is ok.
Maybe "Creative can solve this small problem?

Muvo V200: noise when backlight is lit

Hi,
I have a Muvo V200 and it makes an annoying noise when the backlight is lit (ie: when changing track, navigating through the menu, when it's powered on,...).
I have the latest firmware. I heard it could be fixed by using a previous version of the firmware: anyone can confirm this ? If so, where can I find a version of the firmware that would not create this noise ?
Anyway, I hope it will be fixed in future firmwares !
Leo.

I do find it annoying but I don't want to turn off backlight. I don't have bought a player with a backlight to turn it off...
Btw, it seems the problem has already been reported almost two years ago on these forums: how come Creative did not come with a solution to the problem and, even worst: are still selling players that still have this problem today ?
Leo.

MuVo V200 earphones warra

Hi, I have a problem: my earphones, which were in the package of my Creative MuVo V200 don't work properly (the right one is now playing much louder than the left one). I have purchased the player on 2006-0-06 with one year warranty. Will the phones be changed or the warranty is only valid for the player? Please answer as soon as it's possible.
Thanx in advance - Marius

Yea, my opinion is the same - I can buy new ones, but why should I? I have been using the phones for 3 months only and now without them player is useless, so the warranty should cover them too. Does someone exactly know if the earphones for this player is covered with warranty or not?..

Muvo V200 not supported anymo

H to all and Happy Christmas :-),
I've just received a Muvo V200 Gbyte for present. I haven't seen it on the page. I've seen the Muvo N200 which looks similar but with more features. Is the Muvo N200 similar to the V200 or have I received a procuct which is not going to be updated in the future :-/?. If the Muvo V200 is similar to the N200 I presume the firmware will be nearly the same, Am I wrong?
Thanks :-)

The two products are very similar (they were both launched around the same time), just with a slightly different feature set. More detail here.
Only Creative know what the plans are for each player in terms of updates.

The MuVo V200 beltclip is a joke, Now I have no player. What Can I

Hello all, I'm very disappointed with the Muvo V200 Beltclip. I have had my Muvo since the 9th Jan 2005 and have been using it all the time and had no problems with it what so ever. But yesterday I had taken my player out with me. I had it connected to the beltclip as always. I had taken my headphones out of my ears when I was asking some bloke a question and did not but them back in till about 0 minutes later. When I put them back in I went to turn my player on, But I could not feel it, I look on my belt and all that was there was the dark grey clip that held the player to the belt. I still had the head phones but they must unplugged when the player fell. I retraced my steps but I had no luck finding my player.
All I have now are the Headphones and a dark grey clip, But looking at the dark grey clip there is a hole at the back, which I think something should have been there.
So as you can imagine, I'm very disappointed. What I would like to ask is, Is the loss of my player covered by the English Warranty?
Because I do believe the Beltclip had failed, letting the player fall from my belt. I done my best to find it, but as I said, to no luck.
All thats left now is the part of the clip and the headphones.
<IMG height=295 src="http://thegooddrmartin.co.uk/images/image.jpg" width=35>
sorry for the poor pic (taken on my phone)Message Edited by DrMartin on 04-04-2005 0:42 AM

On the day it happened I was wearing a shirt that covered the top part of my jeans, So only the headphones would have let people know Im carrying a player, If someone was to take it, the only way to remove it would be to lift it, but I still had the clip part of the holder. If someone did take it by ripping it off I would have known about it.
Ok as for it not disconnecting from the headphones I don't know, My headphones did not fall with it, and I did not feel it falling. What I do know is that I have lost my gig V200.
I will phone Creative first thing Monday, But what I was looking for here was someone who might have had the same thing happen with the V200 or another MP3 player, and did the Warranty cover it's

MUVO V200 Help Required

Hi,
I recently purchased a MUVO V200 with 52 mb memory.
My first problem was the FM radio would not work, but I have since put this down to it requiring more power from the batteries than standard music. Bit of a pain as my rechargable batteries, even when fully charged won't allow the FM radio to work. Is this normal?
My main problem; is since reformating the dri've and loading new firmware, the player will only store 00 songs, the packaging advises 256 songs. Can anyone explain if there is anything I can do to enable me to load more songs.
Any advice would be appreciated.
Thanks
James

I have Uniross 770mAh, Energizer 850mAh and Hahnel 900mAh, all .2V and all work fine.
You can convert the files you have to a different bit-rate using the Audio Converter function of MediaSource that came with your player. If you use MediaSource to rip your CDs then you can set it up to rip at a lower bit-rate right from the start.
MediaSource and V200 Media Explorer also have a SmartFit function where the files can be reduced in size as you transfer them to your player, though this slows down the transfer process and you would have to do it again if you reloaded the same files again at a later date.
If these are files from an online music store then you probably can't convert them directly because of the license issues, but you can burn them to an audio CD then re-rip them at a lower bit-rate. If you use a CD-RW then you don't end up wasting a load of CD-Rs.
PB
Message Edited by PeeBee on 0-27-2006 05:09 PM

MUVO V200 - Disk Drive is F

I am having a problem with the disk space of my Muvo V200.
The capacity is GB but yesterday when I tried to copy 600MB of mp3 files I got the message that disk dri've is full.
The player was empty. I formatted it but there was still the same problem. There was not any hidden file in my player of in the files that I tried to copy.
I am starting to copy the files and when I receive this message I go to the properties and it says that I have USED SPACE:540MB and FREE SPACE:453MB.
Despite that I cannot copy all my files.
Does anyone knows wht is going on?
Thank you.
ArisMessage Edited by aris on 0-3-2006 07:34 AMMessage Edited by aris on 0-3-2006 07:35 AM

Please read the FAQ - this is covered there.
PB

Mac Mini and MuVo V200 problem

I have Mac Mini .83 a few months now. Yesterday, I've, for the first time, tried to connect my MuVo V200 via USB. The problem is that Mac simply can't see MuVo at all!!! With other devices I have no problem. What I suppose to do?
Thanks anyone who can help?

Did you have the Mac before you bought the Muvo V 200? You should have read the box and listed requirements,if you bought this yourself. Below are the minumum requirements for the Muvo V 00 or 200.
Intel Pentium II 350MHz or AMD K6 -2 450MHz http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif Microsoft Windows 2000/XP http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 28 MB RAM http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif 70MB free hard disk space http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif CD ROM Drive http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/spacer.gif http://images.americas.creative.com/images/bullet.gif USB .
luvmyrescuedogs

Muvo V200 Starts up for one second and then shuts do

Hi,
I bought my Muvo V200 two weeks ago and was delighted with the quality. Yesterday I went to use it and it starts up to reveal the Creative logo and then shuts down straight away. Now the computer wont recognise it either (although a graphic does appear on the muvo screen saying that it is connected to the computer). Ive tried updating the firmware but the installer gets errors. What do I do?

Other people have had the same trouble so I don't think it's because you're in an Internet cafe, but it would be better if you had access to a PC that you could install the drivers onto. Without them you can't get into Recovery Mode.
Perhaps someone in the Internet cafe would logon as an Admin for you so that you could load the drivers and carry out the firmware reload?
Have you not got access to another PC?
PB

Soft screeching sound on Muvo V200 when backlight is on

Um, anyone pls help me... I just bought my Muvo V200 and the first time I on it, there's a soft screeching and disturbing sound.. But when the backlight off, the sound disappears.. When i press a button, the backlight ons and the same screeching sound comes out... The sound is like (YEEEEEEE)... PLease reply to me asap anyone.. Thanks.

Just disable the backlight if the sound bothers you. It is very easy. Just set the backlight time to zero. Using 32 ohm earphones rather than 6 ohm ones might make the backlight noise almost inaudible if you find a need to use the backlight.

MuVo v200 cannot transfer mp3 f

I have a GB MuVo v200 player. I have so far used up 508mb of my disk space and have 486mb free space.However, when I try to transfer another mp3 file by drag and drop method, the error message appear: Cannot create or replace (filename). The directory or file cannot be created.
Can somebody please help .

I also have a MuVo V200 GB MP3 Player and have the same problem. I get the "Cannot copy {Song name}: The directory or file cannot be created" message when I try to drag and drop the song. I have 42 MP3s and WMAs taking up 535MBs. I also get an "Access denied" message when I try to create a new folder, and a write-protection message when I try to drag and drop one in (One without music). I've also tried to move the music over in the Creative Organizer whoever get "An error occured" message. I also can't create a new folder on my MP3 Player in the organizer using the "New" button.
Any help would be much appreciated.
Thanks,
Dynamite_Kid

MuVo v200.Is it possible in future firmwa

Similar Messages

Maybe you are looking for