MuVo V200 - Need advice on how to play recorded files using Windows Media Pla

Hi
I bought a V200.
Transferred the recorded audios to my hard disk but can't get windows media player to play it. Error message of: codecs needed.
It was recorded as a WAV file.
Please advise.
Thanks.

Apparently you are committed to certain hardware. There is no question that the SSD should be installed in the current HDD bay. Should you choose to have a second HDD, it should be installed in place of the DVD drive. Note that some early 2011 MBPs had SATAII connections to the DVD drive and some had SATAIII connections (presumably later production models).
I do not run Windows on my MBPs but I do know that parallels is a resource hog. On that basis, I suspect that it should be installed on the SSD where you can take advantage of the faster processing. The SSD will be electrically more efficient than than a HDD. If you have concerns about battery run time, then do not install the HDD in place of the DVD drive. I do not know if there are third party applications that allow user intervention for controlling a HDD in the DVD bay. You might search for same. If there is, then the argument of installing it there becomes a stronger one.
You will have to assess your own work flows to determine what impact it has on the configuration options. Since I do not know them, I cannot comment on that.
Ciao.

Similar Messages

How to play MOV files inside Windows Media Center Edition

I've installed QT Pro, but am not able to play MOV files inside Windows Media Center Edition (MCE). Under "My Videos" from the MCE main interface, I can see the files, but once selected, error message indicates unknown/unplayable file type.
How do I get my MOV files to play inside Windows MCE??
Marc

Quote from: cosmosk on 05-April-05, 22:29:47
I don't use MSI's MC application so I can't directly answer your question.
However both Win DVD 6 and PowerDVD6 play them just fine by launching the ts.ifo file.
Yes, I know that, but that means that I should use at least two applications. I need only one front end to launch all my media files, inluding ripped DVD files, not as separate VOBs but as whole movies decribed in IFO files.
Kiero

Why won't Quicktime 7.4.1 play .wmv files when Windows Media Player will?

I am running OS 10.4.11 on a Power Mac G4 Quicksilver 2002. When I try to play .wmv files, the following message appears: "The movie could not be opened. The file is not a movie file." However, I can play such files using Windows Media Player. I have installed Quicktime 7.4.1. That hasn't helped.

Thanks for the suggestions, but I already had Flip4Mac installed. However, I re-installed it, but I get the same disappointing message when I try to open .wmv files from Flip4Mac's "Quicktime Player." Perian doesn't work either. At http://lifehacker.com/software/quicktime/download-of-the-day-perian-mac-204423.p hp I read the following: Perian is a freeware plug-in designed to enable the playback of almost every popular video codec in Quicktime.
In fact, pretty much the only major codec not supported by Perian is Windows Media Video files (WMV), but previously-mentioned Flip4Mac should take care of your WMV needs.
I'd appreciate additional comments and suggestions.

How to convert WMA files (from Windows Media Player) to play in iTunes

How do I convert WMA files (from Windows Media Player) to now play in iTunes?

Use Edit > Preferences > General tab > Import Settings to set your desired import format and bitrate. Note there is no point converting 128k wma into 320k mp3, you'll just get bigger files with no improvement in quality. Once you have set your import settings just drag & drop the files you want converted into iTunes.
tt2

How to encode FCP files to Windows Media files by using Discreet Cleaner?

Do you know how to encode from FCP to Windows Media files in Discreet Cleaner 6.0?
Which is the right settings?
I got errors when I tries
In beforehand thank you very much for your answer

Hello Mikey
I have put up the following in the settings in Cleaner 6.0.1:
SETTING
Windows Media
OUTPUT:
Windows media
TRACKS:
Video media will be encoded into the output file
IMAGE:
- crop: manual
- image size: 320x240
- constrain aspect ratio: 4:3
- deinterlace: auto
Sharpen: radius: 1.5, amount: 50
Adaptive noise reducwe: mild
ADJUST:
- Gamma: 15
- Brightness: -5
- Contrast: 5
ENCODE:
- Windows Media Video V7
- Frame rate: 24 fps
- Insert Key frames: every 300 frames
- Video data rate: limit to 400 kbits/sec
AUDIO:
- Sample rate: 44.100 kHz
- Data rate: 48.0 kbits/sec
- Channels: stereo
BATCH> set default destination- her har jeg valgt en folder på harddisk
STATUS
- "Ready"
PLAY
I get the following message after to played:
"You need to clear the status and/or change settings for the media to begin encoding"
What is wrong with the settings or status?
Kind regards
mary Ann

How to play IFO files in MSI Media Center III?

Read the topic. We all can play avi, mpg, mpeg and other file types, but is there a way to play DVD files from a HD? MSI Media Center III recognizes the VOB's as separate files, not as w whole movie. I see no IFO support in MSI Media Center III, or maybe I'm wrong... Anybody know how to solve this issue?
Kiero

Quote from: cosmosk on 05-April-05, 22:29:47
I don't use MSI's MC application so I can't directly answer your question.
However both Win DVD 6 and PowerDVD6 play them just fine by launching the ts.ifo file.
Yes, I know that, but that means that I should use at least two applications. I need only one front end to launch all my media files, inluding ripped DVD files, not as separate VOBs but as whole movies decribed in IFO files.
Kiero

How do I play radio stations using Windows Media Player as their format?

I would like to play music from radio stations who transmit on the web in Windows Media Format. I'm new (today) to the Ipad and need help.

Look in the app store.
There are many radio apps.

How to play movie file using java tv

hi,
i am trying to play movie file(.mov or mpg or mp3) using java tv in linux plotform and also using jmf jar.
problem is while running appear black screen and getting exception or errors like
Unable to handle format: ima4, 480x320, FrameRate=25.0, Length=460800 0 extra bytes
Thank in adv

Well...
I don't know how to load and play a video with JavaTV. But I've seen some posts telling that .mpg files aren't accepted by the JavaTV.
Some people said that I had to use .avi files and these .avi files, if they were converted from a .mpg file, must had been converted with the Cinepack technology, but I don't know how to do this.
If you find out how to load and play a video, I'd like to know, please send me an email or access my page and post there in the comments, so I can continue doing my application with a video.
[]'s
Cauane B.S.
Computer Science
CNPq Researcher - TVDi
http://cauanebs.blogspot.com
UCPel - Pelotas - RS

How to play recorded videos using FLVPlayback component?

Hey Guys,
     I recorded videos using fms and i want to play them using FLVPlayback component. I've done some research but i cant find something
useful, I tried this code :
     flvplayback.source = "rtmp://localhost/appname/instancename/video";
     this code is not working. Am i doing it wrong or something? Can anyone please point me on the right direction!
    Thanks in advance!
Randy

You may like to use this tutorial for your purpose:
http://en.wikibooks.org/wiki/Beginner's_Guide_to_Adobe_Flash/Video/Using_The_FLVPlayback_C omponent
Here, in the content path you need to put your URL, also make sure that the instance name exist and provide the FLV extension in the url.
Hope that will help you.

How to play .wma and other Windows Media Player-format files/videos on Mac?

Hi again,
I will be asking stupid questions as I'm a newbie to Mac, so please bear with me. There are some video format that QuickTime player doesn't play e.g. .wma files. I tried a couple of times to download Windows Media Player for Mac but it doesn't install on my Mac! Do I require a software similar to Zipfile or does Mac has it all build in?
PS - What is the coequal of "delete" button here in Mac (keyboard)?

Download and install Flip4Mac - VersionTracker or MacUpdate - to play Windows Media files via Quicktime. Also get Perian to provide additional codecs for other video formats.
The Delete key is on the keyboard next to the "=" key.

Why are my .avi files extracted using PE3 only playing audio when using Windows Media Player?

I extracted a lot of my old movies using PE3 that came from my 8MM camera. They played fine on XP.
I now have Windows7 64 bit and when I play them in Windows Media Player, they only play the sound.
I'm guessing that this is a codec issue.
Should I re-extract them using a different product that uses a more standard codec?
Thanks!

It depends on your workflow. So we'll need more details.
How did you digitize the video from your 8mm camcorder? Many devices capture as AVIs, but do so while using codecs that aren't universally playable. Also, do make sure you've got the latest version of Quicktime on your new computer. It can add some important video functionality to your computer.
You say you used Premiere Elements to "extract" your movie. How did you do this? Did you use a device like the ADS Pyro AV Link or Grass Valley Canopus AVDC?
Finally, are you trying to play the raw files or did you create a project with them in Premiere Elements and then Export/Share your video? And, if the latter, which output settings did you choose?
Meantime, try downloading VLC Player to your new computer and see if it can play the files. It is a much better player than Windows Media Player (or Quicktime Player, for that matter). And let us know yoru results.
As I've said, the more details you can give us, the more likely we can help you.

How to convert mov files to windows media player files?

I have a mov file on a jump drive that i need to get formated to play on a digital picture frame.
Any help?

http://www.iskysoft.com/article/how-to-export-quicktime-mov-to-wmv-on-mac.html
if you want other options
https://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=sync+music+to +iphone&oq=sync+music+to&gs_l=igoogle.3.1.0l10.1234965.1238673.0.1241706.13.10.0 .3.3.0.109.683.9j1.10.0...0.0...1ac.NkR_OGi6Prk#sclient=psy-ab&hl=da&rlz=1G1TSEH _ENDK367&q=convert+mov+to+wmv+osx&oq=convert+mov+to+wmv+osx&gs_l=serp.3..0i19.72 92.8140.2.8602.4.3.0.1.1.0.153.369.1j2.3.0...0.0...1c.7AJIbI0ckTA&pbx=1&bav=on.2 ,or.r_gc.r_pw.r_cp.&fp=4612d37b805d4ba0&biw=1825&bih=763

Playing DVD's using Windows Media Player

I've been trying to play dvd's that I've made or bought in both my Dell Inspiron labtop and my Dell 8250 pc and they won't play right. It doesn't matter if it's a music or movie. I downloaded a nvidia video decoder for my pc.......no go! The only thing that seems to work better than anything that I've tried is to download the VLC media player. The play there isn't bad, but I was told by the geek squad that I may need some more memory? All my drivers on both computers are up to date so what gives. If I try to play any dvd in media player without the vlc the audio/video is jumpy and distorted. I've been therefore using the vlc...........it was FREE! I've read in a thread that "changing the region" will then auto play when dvd's are inserted. Thanks for all your help!!!!

It sounds like a codec issue with media player. Media player doesn't come with it's own DVD codec, which is needed to play DVD's. You need third party DVD software or codec to play DVD's, like WinDVD, PowerDVD,VLC (free), etc. When DVD codec is installed, Media player will use this to decode the DVD files.
3rd party software usually has a built in utility that loads at start-up and can be configured to auto play DVD's, or........you can use windows auto play feature to automatically plays DVD's when inserted.
Open "My Computer".> Right click you DVD drive> select "properties"> under "Auto Play" tab, select DVD movies, then check "select an action to perform", Highlight the program you want to play you DVD movies, then click ok.
Message Edited by inutel on 01-23-2009 08:57 PM

HT3775 how to play .avi files using Quick time

Have been sent some movies as .avi files. Quicktime says the correct .codec compenents not avaialable. How can I solve this problem?
Thanks
Raghu

Install Perian and try again. Some AVIs just can't be played in Mac OS X.
(70016)

How to convert pdf files using Windows 8

I am new to windows 8 and want to know to get to the right window to convert pdf documents to word.

http://exportpdf.adobe.com
Message was edited by: Test Screen Name

MuVo V200 - Need advice on how to play recorded files using Windows Media Pla

Similar Messages

Maybe you are looking for