Muvo - volume is too high with new firmw

Hi.
I have a Muvo TX 52 mb with usb2.0, and when i upgraded the firmware to .3.something some months ago i got a problem:
I cant decrease the volume enough with the new firmware!:angry: With the old firmware was volume setting "" very low, and the maximum volume wasnt very high. The new firmware has better mawimum volume but the minimum volume is too high... :-S Hope you understand what i mean.
Today i tried the latest firmware again, .2.02, but its STILL too high volume!
This is really driving me crazy, and propably i would need an OLD firmware (which is much worse in other ways), but i cant find any old firmware too download.
Please help me. Thanks!

I've mailed tech support now. If anyone has old firmware install, _please_ let me konwMessage Edited by muvotx on 07-03-2006 06:27 PM

Similar Messages

The mic volume is too high when calling with an earphone without mic

There are a common problem on the mic volume when calling with my earphone (TF-10 pro without mic). The mic volume seems like turned to speaker mode, so all the background sound has also captured. Therefore, I would like to clarify that it is a common problem or not.

nobody has the same issue with me？

No FM settings in V200 with New Firmwa

Hi! i have just install the new firmware .2.03e (europe only)
and i found out that:
) My players storage has been decreased for about 7MB (i have a 256MB Muvo V200)
- Ok, i can understand why this has happened and i can accept it...
2) My players volume has changed form 0 - 40 to 0 - 25 but it is still has a loud and clear sound that is no problem for me... but
3) The real problem is that i can find any more the FM settings where i could change the region... why they done something like this? if i travel to America for example i can not anymore use my FM radio in My Muvo v200?
Please if someone knows something help my with your knowledge!
Thanks for support!

They did this on the N200 a while back - it uses the standard international region unless you choose Japanese as your language when it uses the Japanese frequency settings. The only 2 options were International and Japan so the player should work fine on FM in the States.
PB

XP can't see the CDFS Boot Camp Volume on Leopard DVD with New MBP

My new MBP 2.4 works fine in OSX aside from this annoying issue where my fresh XP Bootcamp install doesn't detect the PC compatible image on the Leopard Install DVD1 disc to run the Boot Camp installer program and load the drivers and software. At first I thought it could possibly be my superdrive but after checking the disc on the XP and Vista machines in the house including the one with Macdrive on they can't pickup the Boot Camp installer either. My old retail Leopard DVD does work perfectly, but as the new MBP has newer drivers than the original image and the 2.1 update only the sound driver has been installed
I've put a support request ordering the replacement DVD's but they aren't due to arrive till the 21-24th Dec (sent by UK Royal Mail means after the 27th) and when my Thinkpad CPU fan broke last night I need this XP setup for work fixing Windows boxes a lot sooner than 10 days.
Has anyone got any ideas where I can get the newer drivers in any kind of format on the internet so I can get XP up and running before Santa arrives?

Hi,
sorry to hear of such bad luck.
Sadly there is no official download possibility for the drivers you need.
Unless someone has put them on a Torrent site...
Since even your Windows PC can't read the Windows portion of the OSX DVD it is most likely that they are defect.
But you still try this procedure for gaining access to it http://www.macosxhints.com/article.php?story=20060823101421566
Regards
Stefan

Power consumption in Connected Standby Mode too high with no obvious cause even in airplane mode

My Windows 8.1 tablet is draining at a rate of about 3% per hour or 833mW drain while in connected standby mode.
I have muted the sound and set the system to airplane mode, but still receive 3% drain per hour.
The PEP PRE-VETO rate and COUNT are 0. The DRIPS Histopgram has 100% at 32s. The top 5 offenders are all green with 0% active time.
The only value I am unsure about is IR TRUNCATE PERCENTAGE which on Microsoft's examples is always 0, but on my device it is 91% or higher. What does this mean?
Also is there anyway to find out why even though the sleepstudy looks fine I am getting such a high battery drain even with everything off in airplane mode?

Hi Tesmond
We might need more details about your device such as mode and Manufacturers.
And please keep your system, device driver and firmware up to date for good measure.
I think you are using sleep study to trace power usage. I didn’t found any information about IR TRUNCATE PERCENTAGE. I am supposing IR stand for Infrared. So we suggest you check if these is infrared port/connection device on your tablet.
Also confirm this issue with manufacturers to check if it is known issue caused by firmware or device driver.
Regards
D. Wu

Resolution too high with Reader X standard

We installed Reader X on our computers, all of the sudden the file sizes of all of the pdf's are around 20 megs. Can't find anywhere to adjust the resolution?

If I right click on the file and look at properties.....
If I convert any file to a pdf, whether converting word doc, or a jpg the new pdf takes forever to open, I assumed that meant the file size was now giant. You are saying that it has nothing to do with the conversion to a pdf?

Zen Touch: How to edit multiple songs artists and genres at once with new firmwa

With the old firmware I was able to do that with Nomad Explorer. But with the V2 firmware, I cannot use the Nomad Explorer anymore, and Media Source Organizer only alows to edit one track at once. Zen Touch Explorer also does not allow me to do that.
I tried to use Windows Media Player 0 and it worked, but after I closed the program and started it again, all my edits at the Library were gone. If I edit the library and sync to my Zen Touch will it apply what I edited on the library or will it keep the original ID3 tag from the song? How to make the modification permanent to the MP3 ID3 tag on the PC?
I think creative should allow edition of multiple songs with Zen Touch Explorer on the same way Nomad Explorer used to do with firmware V.

I haven't seen a program which does batch editing for MTP devices. Real Player does allow you to edit the ID3 tags of songs on the player, but one at a time.
With most music programs when you change an ID tag on your computer it doesn't update on the player, so you would have to delete it from the player first then retransfer it, or find a program which edits the tags on the player such as Real Player.
The issue is most likely speed, it will take awhile to do batch editing on the player so that could be a reason why programs dont support it..

Mic recording volume too high

Even with the lowest input volume setting in System Preferences / Sound, the mic recording volume is too high and I'm getting clipping. I'm using an MXL Desktop Recording Kit from Marshall Electronics, with a Griffin iMic USB interface, and recording in GarageBand 3 on a Mac Mini.
I'm a folk singer playing a nylon-string classical guitar, so I'm not even especially loud! The MXL mic captures great sound quality, but it is so sensitive that even when I'm six feet away, my acoustic guitar and vocals frequently max out the sound levels and get clipped. The room where I record doesn't allow me to get much farther away, so I need a different solution.
I've tried using compression while recording, but this doesn't appear to limit the peaks or prevent clipping. Do I need to buy a hardware mixer or some other interface to allow me to further reduce the mic input level, or is there another software contol in GarageBand or someplace else (other than System Preferences / Sound) that I'm missing?
I'd appreciate any suggestions. Thanks, David
Mac Mini G4 Mac OS X (10.4.6) GarageBand 3

Thanks for these suggestions. I suspected GB effects wouldn't change the recording levels, but appreciate the confirmation. I checked the Audio/Midi setup in GB preferences, and I don't see anywhere to adjust the recording level there, just a selection for the audio input (source).
I have been using the iBooster, so I tried plugging the mic directly into the iMic and boosting the input level in System Preferences/Sound. This achieved a much lower input level; so low that the GB tuner couldn't even recognize the pitch of a single string when plucked. So this seems to create the opposite problem (recording volume too low). Good idea to try, though.
I will experiment with the room acoustics and try a larger space, but it still seems the recording level is just too high, period. Any other suggestions?
I saw a reference to a simple mixer in another GB thread (Behringer UB502 Eurorack). Could something like this be a possible solution?
Thanks, David

IPod minimum volume level is too high

Hey,
The title pretty much says it all. I got a used iPod for Christmas. I'm having 2 problems: the volume range seems to be very limited, and the minimum volume is too high. (Akin to this post: https://discussions.apple.com/thread/4111969?start=0&tstart=0
Anyways, I was wondering if the Volume Adjustment feature will lower the volume of the songs on my iPod, or only on the computer.
iTunes 11.0.1
Windows 7
iPod Classic 160 Gb
Thanks!

I read that theser is a volume issue with some players in the FAQ.
I tried following the link for more information, but its broken. What did it say ?

NOKIA 2310 Radio Volume Too High !

Hi,
I have NOKIA 3210, and the radio volume is too high. The volume is at minimum level.
Note :
When I activate visualisation (in radio menu), the volume is less high( I can support it ). But one minute after, the volume is high like without visualisation.
How can I lower the volume ?
Eric.
France.Message Edited by cafeiine on 29-May-200709:48 PM

I am not sure how you can fix this, but please take the phone to a nokia care center and ask them if it is normal for your phone to behave like that. It could be a hardware malfunction.

Warning Message - Tracknumber of CEvLaunch too high! Help?

Hi there
I am attempting to import a midi file I found online into GarageBand 09 but I get the following pop up
*Beta-only warning message - not to be localized:*
*Tracknumber of CEvLaunch too high!*
I'm not really too sure what this means? Does it maybe mean the volume is too high? Or there are too many tracks for Garageband to cope with?
When I click OK a few times on the pop up it then pops up
*Launch Event without associated track found!*
*Changed to track 1.*
I then have only 3 tracks for this song when I know there are many more.
I want to be able to hear and use all of the tracks form this midi file in GarageBand 09.
FYI when I play the midi file with Quicktime 7 it sounds fine, with all the tracks being audible.
Can anyone help?
Thanks!

I have a way around this message popping up (but would still like to know why this error appears).
I downloaded this free program
*Midi File Editor 2.01*
Available here
http://mac.softpedia.com/progDownload/Midi-File-Editor-Download-71782.html
Opened the file, and then saved it as a new name.
Imported it to GarageBand and it worked with no errors (although the instruments are way off)
Its a very old feeling program Midi File Editor 2.01, but hey, it worked!
Yay!

I have a record player hooked up through the audio port. The input volume is registering high, but there is no output anywhere. Help?

I have a record player hooked up to a preamp which is hooked up through the audio port.The sound settings are set to have the audio port be "input". The input volume is registering high with fluxuations in the sound settings, but there is no output anywhere. Do I need some sort of third party application or widget to hear the record i'm playing through the speakers that are hooked up to my computer?

keithstopher,
You may want to check into a USB interface, as I believe you have a Mac with the single audio port, which can be used as input OR output.
You may want to check into something like the following, there are may out there, see what fits your needs best.
http://www.amazon.com/Behringer-UFO202-BEHRINGER-U-PHONO/dp/B002GHBYZ0/ref=pd_cp _MI_2
Hope this helps

I have a macbook pro OS 10.5.8. I've sync'ed it with an iPad 2. I would like to access the "cloud" but it seems my Leopard isn't sufficient. How high an OS upgrade would i need to use cloud? Most of my current apps wouldn't work with a too high upgrade.

I have a macbook pro OS leopard 10.5.8. I've synced it with an iPad 2. I cannot access the cloud because my OS is insufficient. Problem is most of my most- used applications would not work with a too-high system upgrade. I can't afford to upgrade all my apps. I need to know: what would be the least-high system upgrade I can install in order to access the cloud on my new iPad 2?
MAC O.S. 10.5.8 - LEOPARD
MacBookPro
MacBookPro4,1
Intel Core 2 Duo - 2.5 GHz; speed 800 MHz
Quark Express 7.3
Adobe Acrobat 8 Pro
Adobe Photoshop CS 3
Adobe Illustrator CS 3
Adobe InDesign CS 3
Microsoft Office 2008
Extensis Suitcase Fusion 12.1.7
Stuffit 12
Thanx
calico6

Define "access the cloud". I can access my iCloud.com account on my 5 year old iMac at work running OS X 10.4.11 Tiger. I can download and upload Word documents and Pages documents in the iWorks section of my iCloud.com account.
What do you want to access in "the cloud"?
Snow Leopard would be your next system upgrade and you should be OK with the CS3 applications, and Office 2008. I cannot confirm that the other applications will work.
This is quite old, but take a look or Google the other applications to see if they are compatible with SL.
http://www.macintouch.com/specialreports/snowleopard/slcompat.html

"bit rate too high" in menus with overlay files

Hi
I opened in DVDSP4 a project I was working in DVDSP2.
In DVDSP2 the project could build without a problem but now on DVDSP4 during build the program either gets stuck or gives the message "Muxer Bitrate Too High" when it reaches a menu with an overlay file (tiff or jpeg / advanced colors).
I didn't add any new assets to the project, just used transitions between buttons and menus available in DVDSP4.
As soon as I remove the overlay file, build continues succesfully.
Anybody has an idea about why this is happening?

Thank you for looking into this issue
Here is something I tried out:
I set the same file used for the overlay, as background image, and build was successful, which probably means that DVDSP can handle this type of file
Ps. Originally the files were tiff (they worked fine in DVD studio pro 2)
When the build problem started in DVDSP4, I converted them in jpeg but I had the same results.

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices

I install latest update from my ipad 2, after the upgrade tablet running slowly. Probably the system requirements too high for my device. I think that users with older models should be able to install IOS 6.x.x on their devices or consider buying devices from other manufacturers ...
People are dissatisfied with the new update a lot, including some of my friends and acquaintances. Is it reasonable to wait until Apple implements the possibility to return to Ios Ios 6 to 7? And how soon it can be done?
Sorry for my english, i am from Russia.

I have a similar issue. I recently purchased an iPad Mini, and I started off by backing it up from the apps I had on my iPhone. Now, I have a number of apps that never downloaded and that I don't want on the iPad. Some of these are apps that I don't need, while others are the iPhone versions of apps. There are something like 23 apps that I have no use for, but iTunes tries to install every time I connect. I've also tried clicking the 'Will Install' buttons. There's no way to delete these apps from the iPad without first installing them, as far as I can see, and there's no way to NOT install them, in iTunes.
It''s not just annoying, it's causing problems with installation of larger files and movies. Now, every time I sync to the computer, I get a warning that I'm over capacity by 580 MB, and larger apps will not install! Clicking Revert and a bunch of other things doesn't work, either. And I can't just delete some of the apps, because I or my wife use them on our phones!

Muvo - volume is too high with new firmw

Similar Messages

Maybe you are looking for