Muvo2 stuck in recov

Hello
I am having a problem - I've tried searching the forum but everyone seems to be on Zens now and my poor little Muvo2 seems rather old hat! Either way I haven't found an answer to my current problem. It was fine this morning and then when I tried to transfer an album it started to go a bit strange. First of all although it was showing the album folder on my pc it wasn't on the player when I disconnected it. Then it decided to go into recovery mode and won't come out of it.
However, when I reconnect it to my PC it is still showing that all the folders are there, I just can't get to them. Some of them are coming up as corrupted and unreadable but not all of them...
I've tried clean up, removing and replacing battery, poking the little reset hole underneath the battery - nothing.
My Muvo2 seems to be stuck in Smartscan and I'm getting the message
Smartscan failed
unable to proceed
Press MENU to start recovery
So I do and I get Recovery Mode v.00 followed by the 5 options, which I've tried (except Format All because I really don't want to have to start loading all over again if I can avoid it - there's stuff I only have on my player...)
Can anyone give me any advice on what to do and whether this is a problem I can resolve?
Thanks
Em

Thanks Jason for your reply.
I ended up wiping it and going back to the beginning, which is kind of a pain for having to reload everything but on the other hand (glass half full mode [ON]) it was probably time for some swap-outs and getting other parts of my CD collection on there....
It seems to be alright now anyway.
Em

Similar Messages

  • HT1414 my i phone stuck in recover mode how can i fix it it keep showing up 1015 an different numbers

    my i phone stuck in recover mode how can i fix it it keep showing up 1015 an different numbers

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    -Griff W.

  • I recently got my battery replaced in the 3GS and tried to update software and restore but phone is now stuck in recover mode.  Please help

    i recently got my battery replaced in the 3GS and tried to update software and restore but phone is now stuck in recover mode.  Please help

    If it wasn't Apple who replaced the battery, then you've voided your warranty.   Bring it back to whomever replaced the battery and tell them they probably broke your phone.

  • Iphone 5s stuck on recover mode

         I have been trying to update my Iphone for the past 5 hours. I am not stuck in recover mode and all my phone says is to plug into itunes. I have tried to store my phone but every time it gives me an error. I have restarted my computer and changed the usb outlets.

    Any error numbers given? If yes, check this article and follow the steps mentioned:
    Resolve specific iTunes update and restore errors

  • IPod Nano 5thG not discovered/ Stuck in Recov./Disk mode

    Hello all,
    My iPod Nano 5thG (and my iPod 5thG Video) are not being detected by either iTunes or Computer (formerly "My Computer"), but are, however, being detected by Computer Management, and, in the case of the 5thG Video, is being detected by 3rd-party iTunes-esque programs.
    most pressing problem, however, is that I cannot recover my Nano 5thG. The reason behind this is that I connected it to my parents' Mac Mini in the hopes that it would be discovered, not knowing then that it would reformat it to an Apple-only format. My iTunes would detect it for around a second, saying that it needed to be recovered into a Windows format, then the popup window closed itself, and the whole system (aside from Comp. Management) couldn't discover it.
    I've completely reinstalled the whole Apple shebang on my computer nearly 10 times, to no avail. What I hope by posting this here and on the Asus forums (if such exist) is that I will find a solution without having to restore my system, or to go purchase Windows 7 AGAIN since Best Buy refused to provide install discs, and Asus made their crappy backup utility prompt me to set up a Factory Restore disc set AFTER I'd used my computer for a month. Yay me, right?
    Any help would be appreciated. I will probably trek down to the Apple store and get my iPod restored properly... if they have a Windows machine there. I will look into a factory restore setting when I finish this post and finish backing up all my files. Thanks in advance for the help!
    Regards,
    ~~--Grishmak

    Reset it (hold down the menu and center buttons for six seconds).

  • Zen Micro - Stuck in recover mode - h

    Hi,
    Can anyone help?
    On using my micro today, on inital booting up for some reason it went straight into rebuilding the data library before going on to say "firmware problem".
    I then decided to try clean up, reboot firmware but nothing seemed to work, before finally formating the thing as the last option. The format has worked, as memory back to full and also my keypad sensistivity has changed back to the original settings.
    However, now the micro is stuck in the recovery mode, as the when using reboot option it just returns back to the recovery mode screen - even turning off the thing/removing the battery does nothing to help, as it just returns back to this screen.
    Any advice/help appreciated before I give in and ring Customer Support!!
    Cheers.

    First of all I had this exact same problem. I had to contact customer support. I had to send my Zen Micro in. Your best plan of action now, is to email or call support.

  • I can't update my iPhone 3G... It's stuck on recover mode.

    I wanted to update my iPhone 3G so I connected to iTunes and it popped up there a newer version of this software would you like to download? I clicked yes, it transferred the purchases and started downloading.. It downloaded the up date but put my phone it restore mode so now iTunes says "iTunes has detected an iPhone in recovery mode please recover to work with iTunes" so I click recover and update.. It goes to extracting files then preparing iPhone for recovery then right there I keep getting errors.. Errors such as (-1), 1603, and 1604 I've troubleshooted them and none of those steps worked.. I've called apple and they emailed me stuff that I read when I troubleshooted ... So if anybody knows how I can  get the phone working again it would be much appreciated.. And if need too know I am running on windows xp with iTunes 11.0.1

    Google "Error 1015" and you will find a solution.

  • While abroad conncted wify got my 3g iphone  stuck how recover

    now the phone remain switched on only few minute, than shut down himself. the screen shows IOS6 and a require to connect at Itunes , no service available   only emergency call.
    the phone has a IOS3 installed and never been updated till now. how it is possible now show IOS6?  tried to connect to Itunes but not possible to re configure  the phone, that not working  any suggestio
    it is mandatory to connect to itunes to recover/reset the phone or there is any other system?
    the phone switch on himself
    apare the apple logo
    appare the IOS6 screen an require to be  configured
    appare the password mask
    after the password appare therequire to connect to Itunes  than, after few seond the phone switch off himself
    trid several time to push sleep and home button but nothing change
    please help

    The iPhone will only show in My Computer if there are photos in the Camera Roll that have not been imported to the computer yet. Also, if the phone has a passcode lock, you need to unlock the phone prior to connecting it to the computer for it to be recognized. Another part of this to getting the phone to sync is if you have been prompted to "trust" the computer. If you do not select yes to trust, the phone will not be shown in iTunes.
    If you updated iTunes and it is still not recognized, then try the steps in this support document. Pay particular attention to step #5. http://support.apple.com/kb/TS1538

  • IPhone Stuck in Recover Loop

    My iphone is stuck in a recovery loop after trying to update to Apple's latest firmware and I have no clue what to do.
    The iPhone "iPhone" could not be restored. An unknown error has occurred (13).

    Hey Zelemiah,
    Make sure the iPhone is directly connected to a high speed USB port on the PC and is not plugged into a hub, monitor, or keyboard.
    This article gives some general tips that may resolve the issue.
    http://support.apple.com/kb/TS1275
    Jason

  • Iphone 4S Stuck in recovering without progress bar ..

    Hi,
    this morning when i woke up, my iphone was OFF. When i tried to switch it on, it didn't, and went to recovery mode .. I tried lots of softwares to leave this mode, but no success ! I tried to restore my phone, using the last itunes didn't work (either in DFU and recovery) ... It's extracting files on itunes, the apple appears on my phone BUT no progress bar !! So it's not recovering ... I tried like everything, you're my last chance ! (i'm using ios 7.1.1). I also tried on different computers, with different cables, no way ! Did i miss something ?
    Thanks !

    Does anybody have a clue ?

  • HT4623 iphone 4 stuck in recover mode. have tried restore a dozen times.

    My iphone 4 locked up on me. message was could not send or recieve calls, Had to do a restore. Now it is stuck in recovery mode. have tried to restore numerous times, hit the power & home button, keeps coming up with the usb icon. Any ideas??

    Describe what happens when you perform a restore (and is it from icloud or itunes?).
    Do you get any eror code?
    Was the device jailbroken in the past?

  • Old phone stuck in recover mode need help!

    Okay so I decided I was going to use my old iphone 4 again but it is stuck in recovery mode. I tried syncing it with itunes but my new iphone 5s keeps poping up and not this device. I can't get the iphone 4 to pop up so I can get it out of recovery mode. Can someone help me please?

    Hmm. Do you have a PC or a Mac that you're trying to sync with?
    I can get you an article with some steps to try to get your computer to see your iPhone.
    ~Lyssa

  • The iPhone "iPhone" could not be restored. An unknown error occurred (9) My iPhone 6 is stuck in recover mode

    Tried updating to iOS 8.1 this morning on my iPhone 6. Mid-update the iPhone recovery mode screen appeared. I have tried restarting my phone, updated iTunes, tested USB port connectivity, restarted computer, etc. Keep getting the same error mid-recovery.
    How do I exit recovery mode?

    Resolve iOS update and restore errors
    The only way to "exit recovery mode" is to restore the OS to the phone.
    Disable any anti-virus and firewall software installed on your computer, then try the restore again.

  • IPhone 2G stuck in recover between softwares

    I was updating my iPhone to 2.0 and my computer went to sleep half way through, so now it is no longer unlocked and in recovery mode between softwares. what do I do? also for some reason, the iTunes store is not responding on my computer

    Ok never mind, I got it all figured out, incase anyone else is having the problem the solution is really easy. you just need to put it into recovery mode, then restore it to the latest software, and unlock it using the new Pwnage tool, 2.0.1 I think

  • IPad stuck in recover mode!!! HELP!!!

    I was having problems with some apps, so i went to restore. It gets almost to the end and then just stops, it wont finish installing. What can I do????

    Have you tried the suggestions here:
    http://support.apple.com/kb/TS1275

Maybe you are looking for

  • Hi i need the explanation for the code below.

    public class RMIClient_CipherKey public RMIClient_CipherKey() public boolean changeKey(String s) int ai[] = new int[s.length()]; for(int i = 0; i < ai.length; i++) switch(s.charAt(i)) case 65: // 'A' ai[i] = 1; break; case 66: // 'B' ai[i] = 2; break

  • Tree from XML

    I have a tree control that is rendered from an xml file with the following format: <element name="textnode1">value here</element> <element name="groupnode1"> .....<element name="item"> ..........<element name="itemnode1">value here</element> ........

  • Error establishing socket. Address already in use

    Running CFMX 6.1 on Win2k3, I just recently started getting these errors from connections to one of our SQLServer database servers (2000, enterprise): quote: Error Executing Database Query.[Macromedia][SQLServer JDBC Driver]Error establishing socket.

  • Partitions I don't use being automounted - Udisks ?

    Several partitions on my disks are formatted but are (were) not in /etc/fstab since for the moment I an not using them (they used to have a 32 bit ARCH version, I am using 64 bit now). But I started noticing that some programs started showing them (t

  • Error when more data are acquired

    i'm using usb 6259 to acquire data. I get error when I try to increase the samples per loop. If I increase the sample rate, I get a new problem, a buffer size must be increased also. I can't edit the buffer size because it's modified automatically in