MuVo2FM (5G) - Never pull the UCB cable out during File transfer

It will create a firmware error. I phoned up the technical support, they verified it. It is a DESIGN BUG in the player.
Creative is so eager to capture a slice of Disk Based MP3 market that they push out inmature products into the market. If you try to find the firmware to download, forget about it. The MuVo2FM (5G) firmware, cannot be found on the web, because they do not have one.
I phoned up the technical support, they send me a firmware which does not work.
The computer cannot even recognise the mp2 player. I think now, the best thing is to throw the player into the rubbish bin.

Norbert,
Pulling out the player during transfer is a bad idea with *ANY* player. In any case, it would most likely corrupt the files that are transferring over, which could cause problems.
Cat

Similar Messages

What will happen if I pull the new pages out of my applic folder and try to use the 09 pages?

I'm tired of fighting the new (less functional) Pages. I created a 16 page newsletter in the 09Pages version but when I opened it today it had been transferred into the newer version and It had lost a bunch of data I had designed into it. I had gotten instruction from an Apple support person on how to tell it to open in the old version so I quit the new version and opened the old one but it's not working according to her directive. It keeps telling me I have to download a newer version to open it. What would happen if I pull the new version out of the applications folder .... will that disable it temporarily and allow me to use only the old version?

Using Get Info to change all documents to open with Pages 4.3 doesn't work. It will work on individual files, but that could be a lot of files to reset.
If you want to keep Pages 5 there are a couple of methods to make Pages 4.3 the default. Just make sure you've reverted or converted any files to iWork '09 format first. If you don't want to keep Pages 5 you can delete it.
Method 1:
This was first posted by another user in this forum. I can't remember who or when. It has been "fine-tuned" by Peter Breis & I added a note for what works for me.
1. Move any new iWork apps in another clearly labelled folder. I created a new folder in Applications & named it iWork 13.
2. Menu > Apple > System Preferences > Spotlight > Privacy > drag the above folder into the list
3. Move the new iWork folder into the trash (temporarily)
4. Select any Pages file in Finder > Menu > Info (cmd+i) > Open with: > Pages '09 > Change all
5. Retrieve the new iWork folder from the trash (right-click > Put back)
Pages 5 should no longer appear as a default App, and you won't have to keep a copy in a separate drive or dmg.
Important: Make a note of where and how Pages was installed for the next App Store update and temporarily move it back there before putting it away again in the folder concealed from Spotlight.
Method 2:
This is the one I used based on several posts here shortly after Pages 5 was released. I now use method 1 because I find it easier to apply updates when Apple releases them.
1. After I installed the new iWork updates I created a folder on an external drive & named it "other applications."
2. I then moved the new iWork apps to this folder & renamed the applications Keynote 6, Pages 5 & Numbers 3.
I have icons for two versions of Pages & Numbers (I rarely use Keynote) in my Dock. Even with two versions of Pages & Numbers running, double-clicking an existing file opens in Pages 4.3 or Numbers 2.3. This should also keep the Mac App Store from nagging you to update.

T530 loses sound when you pull the power cord out

When I pull the power cord out from my t530, I lose sound, until I reboot. I have run updater thingy to get all latest drivers, that seems to what have caused this problem in the first place. I was trying to get HDMI sound to work out of the mini display port which was a hit or miss challenge depending on the order of pluggin things in, but now this is the bigger chanllenge.

if I do a "test" on the device it says it is being used by another application. If I enable/disable the device it doesn't fix it.
I am not on a docking station, no accessories but a USB logitech wireless mouse.

The power went out during a thunderstorm when i was syncing my ipod, now all my pictures are gone? help!

the power went out during a thunderstorm when i was syncing my ipod, now all my pictures are gone? help!

bechosken wrote:
My friend wanted to get some music off my itunes
This is called "stealing". You do not have the legal right to give her the music you have in your iTunes library unless you are the copyright holder.
when syncing it it said she had to update her phone software first
That's not quite what it said. Someone should have paid more attention to the great big warning about the possibility of losing data if the phone wasn't backed up.
We cannot find her new photos. Please help and there was 100 new pics. Is there any way we can get them back. I already have the program Asoftech - but it doesnt seem to register the iphone only C and D drive. Please help!
It restored the backup that was made on your computer 6 months ago, which did not contain those photos. You're wasting your time trying to find them on the phone. They don't exist.
Hopefully, your friend syncs her phone to her own computer on a regular basis. She needs to plug her phone into her computer and restore it from her last backup. That will restore it to the state it was in when the backup was made.
She also needs to get in the habit of extracting the photos on a regular basis, like she would from any other digital camera.

I'm using migration assistant to transfer files from my wife old net book to new mac air and the pc dropped out during transfer. Pc now says waiting for mac to connect and has is stuck at transferring information. How do I get the process to continue?

I'm using migration assistant to transfer files from my wife old net book to new mac air and the pc dropped out during transfer. I started up migration assistant on the Pc again and now says waiting for mac to connect! New MacBook Air is stuck at transferring information. How do I get the process to reconnect and continue?

Whew, good luck!
What version of OSX is on the older one?

The sound drop out during a movie

I am watching a rented movie and suddenly the sound cuts out, I rewind it works it gets to a point and no sound , to say this is frustrating is a understatement , is there a reason or a solution anyone can recommend

I rarely rent because my broadband is quite slow, but I have a lot of home brewed video I watch on the units.
A couple of my AppleTv's started having audio dropouts during playback but no video glitches of note - this was with software 2.2-2.4 mostly and early software 3.0.
I never really knew if it was an AppleTv hardware issue starting eg logic board problem, or due to a software issue, or network issue. It may even be a combination.
This then started happening with music playback or music videos.
My 3 yr old Netgear n router has become somewhat unstable in last 18 months or so hanging every couple of weeks and requiring power off and cooldown or it won't restart - some searching on the net suggested an overheating wireless circuit affecting it's functioning - I now usually disable the wireless functionality and it's miles better though maybe latest iTunes and AppleTv software help.
I use main powerline ethernet adapters by devolo which work very well.
I think either my router was a bit flaky or AppleTV has more general wireless issues in some set ups.
One of my AppleTV's has since failed, so it might be a symptom of impending hardware problem, who knows.
All I would say is that now they for the most part work well on powerline adapters with few audio or other glitches.
AC

Setup Assistant fails during file transfer and loops back to the beginnig

I have a PPC G5 running 10.4.11 and just bought an Intel-based MacBook Pro. (I haven’t gotten it to fully start up yet, so I’m not sure about the OS.)
I've tried to use the Setup Assistant to migrate my files and applications from my desktop to the laptop, but when I get to the Transfer Files option, the Users, Applications Folder, and Files and Folders options never finish calculating. Everytime I hit Transfer, a black-and-white wheel appears for less than a second then disappears, and Setup Assistant loops back to the beginning, where I get the multilingual welcome messages and bad music. Or, if I do nothing and wait for the Transfer Files step to calculate, Setup Assistant still just loops back to the beginning.
I’ve tried the options for transferring from another Mac and from another volume. I’ve tried copying from the G5 in Target Disk Mode and tried copying from a cloned firewire hard drive. I’ve tried using the firewire 400 and 800 ports, different cables. I’ve run DiskWarrior on the G5 and the cloned disc to make sure no disc errors hung up the process. I tried booting into Safe Mode and following that protocol, though it seemed to address a different issue than the one I’m experiencing.
Any ideas about what I can do? I’d rather do this in Setup Assistant than Migration Assistant, and I really don’t relish the idea of reinstalling all the software I have on the G5 onto the MacBook Pro. (Logic, for example, takes forever to install.)
Let me know!

Even if it's a demo, it's unlikely it's got 10.5 on it. Maybe 10.6. I've used the 10.6 SA from Leopard, which ran perfectly with no problems. As for MA, here's one way to go about it, if you can't finish with SA. (Thanks to MonkeyBoy at XYMer's)
If you choose to use the migration assistant after installing SL to migrate settings over from Tiger, it'll copy over all your data intact from Tiger, as well as use the same account names & passwords.
What I typically do is choose a dummy name during the installation, then use MA to import the "real" accounts from the old install. After I'm satisfied MA moved over the accounts properly (I've logged into them and used them for a few hours/days and generally feel satisfied with the lack of crashes and similarly "odd" events) then I delete the dummy account.

Firewire Cable Needed For File transfer Between Old iMac & New iMac.

I have an iMac G4 (Flat Panel) - just got the the iMac 21.5! Need to transfer files between old & new iMac.
Is the 6 pin to 6 pin the correct cable I'm going to need to get my files transfered ???

No. The new iMacs have FireWire 800, which is 9-pin. Older Macs have FireWire 400, which is 6-pin. You need something like this.
http://eshop.macsales.com/item/Newer%20Technology/1394B96036/

The application suspends in webutil file transfer

Dear all,
I have an application that reads pdf files from the harddisk and uploads them to the database using
WEBUTIL_FILE_TRANSFER.CLIENT_TO_DB_WITH_PROGRESS( doc_path_v, table_name_v, 'DOC', 'DOC_ID = ' || doc_id_v,
'Saving the file to the database..', 'Please wait..');
but, when there are a lot of files the application suspends as if the session has expired and I need to log in agnain..
Is there any help with this problem?
thanks.

Hi,
sometime it happens with webutil in 10g. I also faced the same problem. If i transfer a big file. Then system
shows the progress bar when progress bar reaches upto 30% then system stops transferring the file. Then
i need to relogin again and when i try to transfer again. It shows one error "Already transfer in progress".
Then i need to kill the session from AS Console.
-Ammad

Can you use the HDMI Out and the Optical Cable out at the sametime?

I would like to connect the HDMI out cable from Apple TV to connect to the HDMI digital video/audio connection to my stereo and connect the optical out on the Apple TV and connect to my Zone 2 on the same reviever.
Can I use both these Apple TV outputs at the same time or can you only use one at a time?

Yes, lots of conflicting reports, sometimes things can change from one AppleTv firmware to another.
I had assumed PJJW12 was planning on viewing and also outputting audio to Zone 2.
I assume the AppleTv would be hooked to the Av amp - might be worth seing if the current HDMI audio could be routed to Zone 2 to avoid need for an adapter. However the AppleTV is connected if there is a TV involved and audio processing gets passed through it may also be possible to take analogue out from a TV and perhaps route that to Zone 2.

My 2008 MacBook Pro logic board died and I'm pulling the hard drive out. What Apple computers have room for a 2nd 2 inch hard drive?

The logic board on my 2008 MacBook Pro died. But the hard drive is fine. What Apple computer has room for me to insert my old drive as a 2nd hard drive?

You can add it to any unibody MacBook Pro in the optical drive bay, if you can get along without an optical drive and you aren't worried about voiding the warranty (or if the machine you buy isn't under warranty). You can't add it to a Macbook Air, Mac Mini, or iMac, but you can easily put it into a Mac Pro. And of course with any Mac you can put it into an external enclosure and use it as an external drive.
See my second post in this thread for a couple of enclosure recommendations:
https://discussions.apple.com/message/17791697#17791697

Problem with Cross Dissolve: The video cuts out during the transistion

I'm encountering a problem with the Cross Dissolve transistion wherein during the period in which the transition should be happening the video instead drops out. There's plenty of heads and tails available on both clips, but as soon as the timeline hits the start of the transition "from' clip cuts out, revealing the background or black if there's no background underneath and then the "go-to" clip cuts in at the end of the transition.
Any help would be appreciated.

I've been having this issue and it's driving me crazy. It's random, that some cross dissolves work, and others don't. Seems to affect AVCHD footage. Adobe seems to be aware of the issue.
The work around that I've seen posted by a forum user "Mitch W" is to apply a GPU accelerated effect to one of the clips in the pair. The effect can be turned to "0" so as not to alter the video. The act of doing this, makes premiere see the clip differently, and render the cross dissolve correctly.
Fast Blur, set to "zero", seems to do the trick, and allows it to work with CUDA acceleration turned on. I did notice that the work around was broken by changing the playback resolution in the viewer window. In that situation, I had to apply the GPU effect to the other clip in the pair to make it work again.
I don't know what will happen if I change my playback resolution again...

IPhoto crashed during file transfer. Cannot recover photos by rebuilding the library and there is library size discrepancies.

Hi,
I am using an iPhone 4S and running iPhoto '09 version 8.1.2 (204) on OS X (version 10.9.2).
I was transferring photos from my iPhone to iPhotos with the option of deleting the originals on the phone after transfer. IPhoto crashed at some point and I had to "Force quit" the application.
Now, 3/4 th of all my pics is deleted on my iPhone and they are not in iPhoto either! I tried repairing and rebuilding the library as suggested elsewhere on this forum but nothing has worked.
The library size is currently 11.6 GB but the rebuilt library is 5.6 GB. I think the library was around 5 GB as well before transfer. I also tried using the "iPhoto library manager" to rebuild the library. There is no difference between the pictures in the rebuilt library and the default library, but again the new, rebuilt one is 11.6 GB and the library it uses for rebuilding 5.6 GB! So, I think the pictures are there somewhere but I am not recovering it.
Any suggestions as to how to recover deleted photos from my iPhone or to restore the iPhoto library would be muc appreciated.
Many thanks,
P.S. I do not have a recent iTunes or iCloud backup.

If you sync photos between the Mac and other devices via iTunes there will be an cache folder created that will grow over time. That's what the new library doesn't include and, in part, is the reason for the size discrepance.
iPhoto 8.1.2 is only marginally compatilbe with Mavericks and, as Linc suggested, should be upgraded to iPhoto 9.5.1 to be completely compatible.
OT

USB cable removed during backup

Hi can anyone help ? My son pulled the usb cable out of the pc during backup. Now my PC says "USb device not recognised" How do I fix this as I cant connect to my pc now ..

Hey just got it to work ...
I had an extra usb cable I got with N72 ( my current phone is 6280) All i did was swap cables and my pc did a cable driver check and installed the new hardware ie phone.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

MuVo2FM (5G) - Never pull the UCB cable out during File transfer

Similar Messages

Maybe you are looking for