MuVoTX FM Mic recording rate 4KHz, need more bandwi
RE: Creative MuVo TX FM Nomad 52meg
I have purchased the above mentioned product, I am battling with this device as the FM recording
seems to take place at 8KHz in stereo. This is very usable and acceptable.
When I do recordings via the microphone it seems to lessen the recording rate to 4KHz in mono
mode. This is a severe drawback for me as the audio playback quality here is very dull and un-usable. The mono / stereo here is not the problem the 4KHz sampling is.
I do realize this will have a severe impact on the recording time available and the amount of
memory used, but this would definitely be an acceptable compromise to better sound quality.
I am currently using firmware version .3.03
Any suggestions or solutions to this problem would be greatly appreciated. Thankyou
DirkMessage Edited by asapcs on 03-22-2005 0:07 PM
Jimi - please refrain from bumping (especially with empty posts):
https://wiki.archlinux.org/index.php/Fo … te#Bumping
Detail what else you have tried, other material you have referenced etc...
Similar Messages
-
Search help needs more records than 500 or 5000
I have a requirement to create search help on a non primary key field . So I need to work on search help exit to remove all the repeating and blank values . The problem I am facing rite now is that search help gets only 500 records by default and 5000 if we leave the restriction field blank . I need to get all the records which is approx more than 100000 and get only the unique values .
Please let me know how I can increase the number of record more than 5000
Regards,
TashiHi Tashi,
The following approach might work out in y our case by overwriting the data fetch functionality of the standard Search help
1. Define internal table of desired structure, in the way you get the data from DB table
2. use your custom function module / class method or select statement to get the desired data into the newly
defined internal table
3. apply required sorting / filtering / formatting as per the requirements
3. loop through the resultant data in the internal table and append the records to standard internal
table / parameter RECORD_TAB of the Search help exit. Please make a note that RECORD_TAB has the
structure field STRING which needs to be populated with the correct offsetting..for example, if the first field
is of 10 characters and second field of 5 characters, it should be populated in the following way
loop at itab into ls_itab.
wa_record-string+0 = ls_itab-field1.
wa_record-string+10 = ls_itab-field2.
wa_record-string+15 = ls_itab-field3.
append wa_record to record_tab.
clear wa_record.
endloop.
EXIT.
Please try this approach and let us know.
hope this helps.
-Sajan Joseph. -
Hi Lèonie, I tried, but it still recording only 8 minutes (more or less).
I took off the 'metronomo', tempo is on (automatic), the section time
is on (automatic).
What do you mean when you say "set the tempo to a very low value" ?
Thank you again.
Best Regards,
EnricoEnrico,
in your previous post you said:
GarageBand (used with a Mic microphone) is stopping to record after only 7/8 minutes.
In which way I may record a complete concert or at least one hour of music ???
If you want to record at least one hour of music, you need to make the max. of 320 bars last for a long time - for example:
With a maximum of 320 bars, a song with160 bpm and a 4/4 measure will only last for 8 minutes; to make it last 32 minutes, reduce the tempo to 40 bpm.
Léonie -
USB Mics, Sampling Rates and "dumb" apps--help please
I hope someone here can explain this better than the support people at Blue did.
I have a Blue Yeti USB mic. It has a fixed output of 16 bits/ 48kHz. In most recording apps, I can set the sample rate in the app to match at 48kHz. What happens when using this mic with a "dumb" app like Camfrog or Skype, where the user cannot set a matching sample rate in the app? Will the pitch be affected due to the 48 kHz fixed rate of the mic, as opposed to a more common 44.1 kHz?
Any insight into this would be great. I could ask people on Camfrog if my voice sounds right, but they don't know what my normal voice sounds like!
Thank you.Darn. Not being able to type at login sounds like an issue mine has every so often, although if you don't log in RIGHT AWAY on mine, you have to force it down and restart because when you type, it pinwheels and never stops. Mine also hasn't been able to restart or shutdown so I haven't been able to apply updates.
-
ere are the specs on the Mac I need more power on.
Mac Tower
Processor 2 x 2.26 GHz Quad-Core Intel Xeon
Memory 6 GB 1066 MHz DDR3 ECC
Graphics NVIDIA GeForce GT 120 512 MB
Serial Number H00354XF20G
Software OS X 10.8.5 (12F45)
Harddive 640 GB
SATA Disk
(2) Harddrives 1 TB
SATA Disk
RAM 6 slots total -- 6 are filled with 1GB
(3) UAD Quad cards installed
I use this computer stictly for audio recording.
Pro Tools 10.3.7
Interface Apollo 16
Pro Tools is curretnly not compatible with Maverick. Also, I believe that Pro Tools 10 only allows 4GB ram to be utilized (not sure )
I know Pro Tools 11 allows more, but not sure how much more. Also not sure if the upgrade to Pro Tools 11 I will have to purchase all new plug ins or if my existing ones will continue to work in it.
The platform changes from 32 bit to 64 with the upgrade to 11
If it is as simple as adding more ram, what mode-part #l would you recomeend. Can the processor be upgraded also ?
The new tube like Macs are non compatible with UAD Cards. Those cards a must my sessionsYou can use Activity Monitor to check if apps run as 32 or 64 bit - simply look at the "Kind" column (you may need to select it under View -> Columns) and see if the app in question is listed as "Intel" i.e. 32 bit or as "Intel (64 bit)".
While in Activity Monitor you can also check if Pro Tools is close to the 3-4 GB limit of a 32 bit app - if you aren't you will probably not benefit from more RAM.
Your MacPro (it appears to be a Early 2009 model) should have come with a small booklet showing how to install RAM and what kind of RAM that you need. Any RAM that fulfills the requirements should work but your safest choice is probably to buy from a retailer/online store that supports Macs as they will usually know what kind of RAM you need for your mac model.
Upgrading the CPUs should be possible, but I haven't seen Apple document how to do this, so you will probably have to google around a bit to find instructions and CPU part numbers.
Your choice of CPUs will also be limited by the motherboard and CPU socket so you may be limited to faster version of your current CPU chip and some slightly newer versions.
Going from your current CPU to the fastest version included in the 2009 MacPros would be going from 2.26 GHz to 2.93 GHz. This would only give a modest 30% speed boost. Using newer and highly clocked CPUs might boost this somewhat more maybe to 50% ? -
Need more than 90 minutes of continual video
,Need more than 90 minutes of continual video? Hi all,
I'm using the Vado HD [first gen] as a "hidden cam" type of thing for a play that I am filming. I have 2 normal cameras set out in the audience, but I want to mount the Vado HD above the stage for a bird's eye view of a sword fight scene that I can cut to when editing footage. The problem is that the fight scene happens near the end of the play and there are no intermissions.
Since the filesystem used on the Vado HD is FAT and not NTFS or HFS+, I run into the 4GB limit and the camera simply puts itself to sleep about 45 minutes into recording even though there is more space on the dri've and the battery is fine.
Can I reformat the Vado HD with HFS+ or NTFS? [i use a Mac but can run windows via VMware Fusion if need be]. Is there any way to squeeze 90 minutes of video in one file on this camera? If I reformat the camera, will it mess it up? [i don't use any of the apps that were installed on the camera - i moved them from the vid camera to my laptop actually, so i don't care about losing anything valuable on the vid camera].
Thanks for any tips you might have!
/vjl/Could the reason be that you are capturing to an FAT32 format hard drive and it is only allowing you a limited maximum file size? Not sure but I think it is 4GB which would equate to 1/3 of a DV 13GB hour ...or about 20 minutes.
If that is correct, and you should be able to tell because the capture window will display the file size limit as space available during capture, you could do one of two things:
* reformat the drive as NTFS which removes the file size limitation (I have just done this on an external drive for exactly the same reason), but do look up online instructions for this and do it carefully.
* if the material is not long continuous shots of over 20 minutes, switch on Scene Detect during capture; it's wise to cut material up into smaller chunks in any case as huge files become very unwieldy and handling them could slow your machine right down. -
What's status of my order? We need more time to process your order.
I cannot find on the Adobe site where to find the status of an order.
Last Saturday I placed an online order for an annual subscription to the CC Photography package. After I had completed all the steps a message was displayed on my browser that read something like "We need more time to process your order." There was also a statement that said something to the effect that I would be contacted by email the next business day, but I have seen nothing.
I'm certain this is not the place for questions about order status, but when I followed the steps in Contact Us, this is where I wound up. I prefer to use email or the internal messaging system rather than phone, so I can have a record of what was said.
Thanks - DaveThis has been a colossal hassle. Notice there's no reply to my question here about how to contact whoever the rep res referring me to.
When you go through the order process it doesn't ask how your name appears on the credit card. I'm "Dave" here, but on my credit card I'm David. Maybe that's why it didn't go through. Maybe it isn't wise to order on the weekends (I placed my order on a Saturday).
In two chat sessions the rep said he (or she) would escalate the case and I'd hear in 24-48 hours. Never heard a thing.
I finally went through the order process on a Friday, edited my profile with my real name and it went right through. I chose to download Photoshop CC 2014. I got a Web page with the header Downloading now... or something like that. But there was no activity indicator. I tired the forum but the entire forum was down. Finally after a useless chat I opted to start the download again. The CC Application Manager started up and displayed a progress bar. When it was finished I got a message saying the download had failed. After a couple more tries I got PS and Bridge downloaded successfully then downloaded Lightroom. BTW, you don't get the install files. It installs as it downloads. You can't tell it where you want it installed. For us with a tiny boot SSD it's a squeeze.
I've reactivated my Lynda.com membership and am catching up on what's new in PS CC 2013 and 2014. Photoshop CC seems to be behaving OK, but I'm not sure if Adobe is ready for prime time. Do you suppose they had a hand in crafting Healthcare.gov?.
- Dave -
Even with the lowest input volume setting in System Preferences / Sound, the mic recording volume is too high and I'm getting clipping. I'm using an MXL Desktop Recording Kit from Marshall Electronics, with a Griffin iMic USB interface, and recording in GarageBand 3 on a Mac Mini.
I'm a folk singer playing a nylon-string classical guitar, so I'm not even especially loud! The MXL mic captures great sound quality, but it is so sensitive that even when I'm six feet away, my acoustic guitar and vocals frequently max out the sound levels and get clipped. The room where I record doesn't allow me to get much farther away, so I need a different solution.
I've tried using compression while recording, but this doesn't appear to limit the peaks or prevent clipping. Do I need to buy a hardware mixer or some other interface to allow me to further reduce the mic input level, or is there another software contol in GarageBand or someplace else (other than System Preferences / Sound) that I'm missing?
I'd appreciate any suggestions. Thanks, David
Mac Mini G4 Mac OS X (10.4.6) GarageBand 3Thanks for these suggestions. I suspected GB effects wouldn't change the recording levels, but appreciate the confirmation. I checked the Audio/Midi setup in GB preferences, and I don't see anywhere to adjust the recording level there, just a selection for the audio input (source).
I have been using the iBooster, so I tried plugging the mic directly into the iMic and boosting the input level in System Preferences/Sound. This achieved a much lower input level; so low that the GB tuner couldn't even recognize the pitch of a single string when plucked. So this seems to create the opposite problem (recording volume too low). Good idea to try, though.
I will experiment with the room acoustics and try a larger space, but it still seems the recording level is just too high, period. Any other suggestions?
I saw a reference to a simple mixer in another GB thread (Behringer UB502 Eurorack). Could something like this be a possible solution?
Thanks, David -
kt3 sound for no sound with mic record-
xp2400,kt3ultra2-ms-6380e,ati radeon9000,98se, hdd western 60gb x 2, 1.5gb ddr pc2100 ram, hp 9100,hp200i,56x cd
hi 2 questions, i can't get sound on my mic, well input sound i mean. when i click on speakek in bar for volume controls i have line in balance not on mute. is the another on that should be on mute. i remember there was something on windows that before was on mute to make it on. is that still true. what am i missimg? is there another place to look. my output sound is great. even with my sad 2 speaker only set up. any ideas. tell me even the obvious....
ps anyway to put a fan on a radeon9000. case and cpu temp good. just would like to have more on the 9000'
at desk work i have 41c cpu, 35 case, game goes to 44-46c cpu, 38c case. it's just when it gets up there my vid locks up or runs jumpy.
i posted here to, i didn't get answer on under sun' so i guess that was wrong place to postHi,
Have you tried another mic?
Did you select the record mixer and selected the mic as input source?
Look under properties in the mixer...
Also, Win98SE with 1.5GB ram is not a good idea as lot's of trouble start when you get above 512MB.... -
My ipod touch don´t have much sound on music tracks (i already go to settings-music-sound limit unlock), i really need more power sound for using ipod to teach fitness classes what can i do!?
I imagine that... a limit of sound because ears problems understand that...but in my case i need power i´m not buying a better surround for the gym (the owner must do, but everyone use cd´s and i not see me record cd´s again) ...its the only problem for this iPod to be perfect.... I´m in Portugal, by the way!!! and thanks again for you helping!!
-
How large of a hard drive can I install on dual G5, and do I need more RAM?
I recently had a situation in which my dual-processor 2.0 G5 was completely refurbished by Apple repair-new logic board, both processors, video card, thermistor, all new. Finally it has been working well after a month of trips back and forth from the Apple store. I have two internal hard drives installed on my G5, both 300GB, one for OS applications, and one for audio. I am running out of space on my main hard drive, and so I recently purchased a Maxtor 1TB hard drive, now manufactured by Seagate, from Fry's. After having my G5 refurbished, I was having an issue with my Samsung 930B monitor going into sleep mode when I boot-up from a CD, but other than that G5 was working fine. I removed the main 300GB hard drive from slot #1 and put it into slot #2, from which I had removed my audio hard drive. I installed the Maxtor drive in slot #1 and reformatted it for Mac using my laptop with ATA/USB cables previously purchased for data transfer. This took about 14 hours as I used the "zeros" option. After that I hooked up the internal cables to both drives and tried to boot up from Leopard in order to install it on the Maxtor drive, but again my monitor went into to sleep mode. We went to the Apple store to try to see if there was an issue with the computer, but everything worked fine with their monitors and CD's, as well as my CD. So there is some kind of issue with my monitor, probably software as it works fine when booting up from the main hard drive, and also was fine when I did its self-test function. While at the Apple store, they installed Leopard from their hard drive which took about 30 minutes.
My problem is this: When I arrived home, I turned on my G5, which had been set to boot from my new Maxtor drive and complete the Leopard setup process, which we had decided to do at home as it would have taken another 20 minutes in the Apple store. The G5 turned on, chimed, I got the Apple screen with the wheel, but then after that my monitor goes into sleep mode. I can hear Leopard's setup intro playing through the speakers, but the screen is in sleep mode. So I reboot holding down the option key so I can boot up from my old (300GB) main hard drive, now in slot #2. This works and the monitor screen does not go to sleep. However, as I am browsing on the web to check for issues concerning this monitor, the G5 freezes, and I get a screen with black bars with writing in them and various technical language across the screen. This happened several times after rebooting. Finally I shut the computer down. I am going to try removing the new hard drive and putting both old ones back in and see if the G5 stops crashing. I think the monitor issue is a separate issue, and I am more concerned with the crashing, as previous to the new hard drive installation the G5 was working fine, monitor fine, other than the issue when booting up from a CD. Do I need more memory? Is the 1TB hard drive too large for my dual-processor 2.0 G5 and overloading it? Would I be better off with a 500GB drive? Would appreciate advice from persons with experience in this area. Thank you.I have replaced my 5 year old G5 with a Mac Pro, as the G5 just had too many issues, even after replacing all major components (logic board, both processors, video card, etc.) Once I took out the 1 TB hard drive from my old G5, it stopped having the kernel panic issue. Nonetheless I had been through a lengthy repair process previous to this issue, so I didn't care to trust an older machine any longer, especially since being told by an Apple tech that the "new" parts were really just older parts stockpiled from a central location. Could be new, could be refurbished. Apple was kind enough to credit the money we had spent on the G5 repairs towards the purchase of my Mac Pro.
-
my ipad 3 currently has only 18% charge, ive just gone to click on the download button to download new ios 6 but its not highlighted so therfore i cant do it, is this because ipad needs more charge?
Yes, the update takes quite a bit of time (> 1 hr for my iPad2) and will not initiate unless you have enough juice in your battery or are plugged in.
-
Hi
I am getting a warning on opening my mac saying I need more space as my setup disk is full. I have emptied many files as well as my Trash. I am planning to get an external drive for my photos, but it has been suggested that I check Console and under the system log the following message (of which they say 4000 messages have been logged in 2 days) '06/06/2014 16:08:23.341 com.apple.dynamic_pager: dynamic_pager: Need more space on the disk to enable swapping'. This is a copy of one of the items. It is from the system log. I really do not think I have enough files to warrant this warning, with the exception of photos. My storage shows 143 MB free out of 120.47. Thanks for any help.First off, no MacBook Air can run 10.3 or earlier.
Secondly, are you sure you only have 143MB of storage free? That's seriously low. With MacBook Airs of 120 GB hard drives, or even 140 GB which is often the case when it says out of 120, you shouldn't allow your free space to go down below 20 GB. MB is 1024 fold less than a GB. So if you really have 143MB free on a MacBook Air, you are long past the minimum space you should be keeping it at, and need to start clearing a lot of space now*:
http://www.macmaps.com/diskfull.html
I'm asking this thread be moved to the MacBook Air forum,a as we can't say for certain what you have when you post in the 10.3 or earlier forum. -
PS CC Says I need more than 512 Vram ...
I was using Photoshop last night just to prep a couple of photos for class submission (3 pictures, just reducing their size for web consumption), and I got the message stating that I needed more than 512 Megs of Vram, which was odd to me, as I have 1024 Dedicated available on my video card. I don't run a dual monitor setup any longer, but I do have an ASUS PBs278 that's running at 2560 X 1440. My current graphics card is an ATI Radeon 6800 HD, and my windows 7 system is running on 8 gigs of ram. Up till within the last week, CC has worked just fine, but the other day on boot, it took an unusually long time to get into the software. It eventually did, and I'm wondering if that was an update or some such that's now made the software decree that if it doesn't have the 512 it thinks it should have, the 3d functions won't happen. I don't know if it's a consequence of the larger quantity of pixels being pushed, or if it's the video card getting too old to support CC at such a high resolution now, but some help would be amazing.
Windows 7, 64 bit. I haven't been able to replicate the error, but I have the new drivers as well. I hope this just ends up being a fluke.
-
Hi, I use licensed Adobe Connect. Earlier in the meeting could involve up to 100 people. Now only 25. How, using Adobe Connect can increase the number of participants in the meeting? I need more than 25 people.
Thanks for your help.The purchasing option through adobe.com only allows up to 25 attendees. If you need more than that, you will need to purchase through a reseller. You can find one that is able to sell in your part of the world, here: Adobe Connect Partners. Just reach out to one of the Global Partners.
Maybe you are looking for
-
Displaying Date Parameters in Report Heading
Post Author: Jim-1003 CA Forum: Formula Hello, I am new to Crystal Reports, and I am trying to improve an existing report definition so that the beginning and end dates selected by the user are displayed as part of the report heading. I saw somethin
-
Version control: table modified date is changing but nothing seems to be modifying it! Why?
I have a series of databases. They're mirrors of each other in structure, only the data inside them changes. There's a database for each customer. Each night I run a procedure that checks if anything has changed in the database since the previous run
-
HT202213 how do I download my account to my Sony expire j
how do I download my y to my Sony expire j
-
Error ::OraOLEDBpus10.dll: The specified module could not be found.
hello all, i have Oracle 9i installed in my system; Without deinstalling Oracle 9i , i have installed Orale 10 G ... while opening my application(it is in vC++), i got the following error: OraOLEDBpus10.dll: The specified module could not be found. p
-
I updated mac os x for ppc on 04 03 2006 but I counld not open safari's bookmark, someone help me how can I do repair work? mac Mac OS X (10.4.6) 20" iMac G5 Powermac 12,1