MUXER Bit rate too high

I am in the process of creating a PAL version of an existing NTSC DVD
I created PAL-compliant video files from iMovie.
Then, I took the existing NTSC DVDSP project, and:
- deleted the existing video files from the clips and the Assets
- Set the video standard to PAL
- Saved the DVDSP project under a new name
- Imported the PAL video files as assets and attached them to the clips.
I left the audio files as is (all AC3)
I kept the same menus (Menu1 has a PAL video as a background)
When I try to build, I get an Muxer Bit Rate too High error message right after the Auto play segment is processed (see log below)
The Autoplay segment is a slideshow made up of jpeg pictures with a "cube" transition. There are two audio streams and two subtitles streams (one in English, the other in French).
I never had that problem when burning the NTSC version. What do I need to change?
Here is the log of the build:
Building Project Tibétains bilingue PAL
01/03/07 08:45:52
Build Folder /Volumes/MAXTOR HD/PAL videos
Starting DVD Build 5TIBTAINS_BIL...
Compiler Initializing...
Precompiling Project 5TIBTAINS_BIL
Parsing Assets...
Encoding Assets...
Compiling VMG Information...
Created 13 PGCs in VTSM1
Created 13 PGCs in VTSM1
Created 5 PGCs in VTSM2
Created 5 PGCs in VTSM2
Created 5 PGCs in VTSM3
Created 5 PGCs in VTSM3
Created 9 PGCs in VMG.
4 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Rendering Menu:Menu 1,Language:2...
Compiling Menu#2 (Menu 2)...
Rendering Menu:Menu 2,Language:1...
Rendering Menu:Menu 2,Language:2...
Compiling Menu#3 (Menu 2a)...
Rendering Menu:Menu 2a,Language:1...
Rendering Menu:Menu 2a,Language:2...
Compiling Menu#4 (Menu 1a)...
Rendering Menu:Menu 1a,Language:1...
Rendering Menu:Menu 1a,Language:2...
Writing VIDEO_TS.VOB
Compiling Menu PGCs...
Writing VTS020.VOB
Compiling Menu PGCs...
Writing VTS030.VOB
3 VTSs and 9 Titles will be created...
Compiling VTS#1 (5 Tibetains21)...
Preparing Subtitles...
Muxing VTS011.VOB
Done.
Compiling VTS#2 (auto Play)...
Writing VTS020.VOB
Generating Transition: auto Play, Clip 1...
Generating Transition: auto Play, Clip 2...
Generating Transition: auto Play, Clip 3...
Generating Transition: auto Play, Clip 4...
Generating Transition: auto Play, Clip 5...
Generating Transition: auto Play, Clip 6...
Generating Transition: auto Play, Clip 7...
Generating Transition: auto Play, Clip 8...
Preparing Subtitles...
Muxing VTS021.VOB
Muxer Bitrate Too High
Thanks,
Pierre
Dual 1.25 G4 Mac OS X (10.3.9) DVDSP 3.3

While waiting for an answer, I tried a few things.
I solved the problem by re-doing the slideshow for the Autoplay segment.
I believe that the issue was the fact that I had converted the slideshow into a track in the NTSC version.
That track had to be removed and re-created in the PAL version (just like any other video asset).
Hoping that this will help someone else.
Pierre

Similar Messages

PCM problem - Muxer Bit Rate Too High

I'm continually receiving the error "Muxer error Bit Rate Too High." I've narrowed it down to the PCM audio that I'm using. I know many would recommend that I switch to .AC3. Unfortunately, that is not an option.
I received audio from 3 sources. From an audio post house, the quicktimes produced on my mac and the encoded PCM files from the Maestro real time mpeg encoder. The weird thing is that the PCM files from the real time encoder work fine. If I remove all the audio, but leave the PCM from Maestro...there are no issues.
I have even gone as far as outputting from FCP to dbeta and then re-encoding with Maestro and that didn't work.
Any help would be greatly appreciated.

Erik, you may be about to hate me, but I am just making sure I understand the process of elimination, you deleted all audio from all tracks and ONLY left the PCM audio on the main track and it did not build? And the same thing for each of the menus (all audio out of the project except for a menu at a time?)
1.) Not sure how you made the menus or you default preferences within DVD SP, but if the encoding rate for menus was high and it was a motion menu the spike could still happen.
2.) If the steps were as above, take a look at the build file on your computer to see where it is crashing out and/or watch the log to see what is being muxed when the projects crashes
3.) If in fact that leaving just the PCM audio in the track by itself (not the 5.1) you may want to delete preferences and the MPEG/PAR files that DVD SP creates and also repair permissions. Then take the PCM and try rexporting from Quicktime to AIF and use a different name for the file such as "SecondTry.aif" so it is clear it is the other file.
BTW which version of DVD SP are you running and which version of QT?

HD DVD (Muxer Bit Rate Too High) - Cannot Burn

I am trying to burn an HD DVD and have used the Compressor preset MPEG-2 setting. I have a Toshiba HD-A2 player and have already tried the .h264 and it didn't work (I know it is not supported). The file actually played though, just very slowly.
Anyway, I read up that the MPEG-2 works with the Toshibas, and have encoded the file into DVD-Studio Pro 4. It plays inside of the program fine under simulation, but when ever I try to either build or burn the disc, I get this:
Building Project Untitled
2/23/07 2:03:00 PM
Build Folder /Users/TheMatrix/Desktop
Starting DVD Build UNTITLED_DISC...
Compiler Initializing...
Precompiling Project UNTITLED_DISC
Compiling VMG Information...
Created 6 PGCs in VTSM1
Created 8 PGCs in VMG.
0 Menu(s) will be created...
Compiling Menu PGCs...
Writing HV001M01.EVO
Writing HV000M02.EVO
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Track 1)...
Writing HV001M01.EVO
Muxing HV001T01.EVO
Muxer Bitrate Too High
The error is in regards to the Muxer Bitrate. Any help? Thanks in advance.

Means the combination of video/audio stream is too high - did you encode outside of DVD SP using Compressor? You may want to try that (make a new HD MPEG setting) and knock the rates down.
Also FWIW, trying to get it to run on the Toshiba may be difficult at best - take a look for Toshiba HD and there seems to be issues with the newer versions of the firmware
http://discussions.apple.com/thread.jspa?messageID=3737691&#3737691
http://discussions.apple.com/thread.jspa?messageID=4069682&#4069682

Encoding error- Muxing bit rate too high

hi,
i am trying to burn my project which has 2 videos of 10 minutes each.
one of those videos has 19 subtitled tracks and simple sub-menus. All the video was encoded in compressor and i tried both a VBR and CBR. I am only using audio that is AC3. For bit rate setting i am using 6 and a max at 7. The muxing craps out about 33% though. When i open the last file in MPEG Clipstream, i can see it dumps out at about 8 minutes but there is nothing on any of the subtitle streams that appears out of place. Total project is under 1 gig in terms of space so i am not sure why i having problems. i also posted this on the dvdsp forum but so far, no one has been able to help solve the issue. please help. thanks.

Eric suggested:
"Try trashing your preference and getting rid of any PAR file associated with the disc and rebuild. Delete your old asset from the import window and trash it on your computer as well. If that doesn't work I would build the project from scratch and try again. Im looking for the data rates for a subtitle but I cant find it right now. But 6 mb/s CBr should be good."
What happened when you tried this?

Dvd studio says bit rate too high

I have created a video from motion and used compressor, best quality 90 min, my audio is ac3 dvd studio says bit rate too high, any ideas?

It's probably telling you the truth. If the only thing on your track is a single video assett and a single audio assett, try the 120 min setting or manually reduce the avg & max bitrate in the inspector.
~D

Very Strange | "Muxer Bit Rate To High"

I've been working on a simple DVD project. The project was done using DVDSP4 on a apple G4. There is only one track w/ one button and the backround motion menu w/ music (30 seconds, then loops). The encoder settings for the backround motion is (5.0min\7.5max). The one track is only 11 mins, so I'm not using much space on the disc. After over 10 times now, it keep telling me the muxer bit rate is too high. I havev changed the settings for the backround file so many different times. I have also made a mpeg2 in compressor but still the same problem. If I remove the backround motion file, it burns no problem. The backround motion file is from digital juice, it was rendered to DV size (720x480) in quciktime format. So, right now theres a still image of the backround till I can figure this out. Please let me know if you have any ideas on why this is happening. I've already spend hours and hours on it. I just want it to work.
Thanks so much for your time and help.
Mike D

aPAc/Dolby the audio if you have not that should help
Take a look at this thread for bitRate issues
http://discussions.apple.com/thread.jspa?messageID=2212949&#2212949

Stumped - Video Bit Rate too High Error

I just upgraded to FCP 7x and I am trying to burn a disc on DV Studio Pro. It runs through the rendering fine, then when it is ready to burn it shuts down and says the video bit rate to high. So I went to the manual and the manual suggested changing the codec to Apple Pro 422, something like that. I did and am now still getting the same error. This has never happened before and I've been using FCP for 6 years. Anybody know what to do or has had a similar problem?

mvp productions wrote:
It runs through the rendering fine
Let's get some terminology correct. I believe you mean it "compresses" fine. How are you compressing the file. In Compressor?
the manual suggested changing the codec to Apple Pro 422
I think you may have misread that. All SD DVD's are made from m2v files for picture and ac3 or aif files for audio. Pro Res is an editing codec.
This is my quick and easy how to make a first play SD DVD.
Just send the sequence to Compressor (Right click the sequence and send or export to Compressor). From Compressor choose the settings for DVD Best Quality 90 minutes (If your project length is longer choose a longer time). Submit the files. This will create 2 files. An m2v for picture and ac3 for audio.
Bring both of those files into DVDSP. Add the files to the empty track (a green box). Right click the track and select first play. Build the DVD then Burn.

Subtitles causing "video bit rate too high" error

At least I think they are. My media was all encoded through compressor and when the build gets to:
- Preparing Subtitles...
- Muxing VTS011.VOB
the next message is red...
- Video Bitrate Too High
- Build cancelled
- Formatting finished.
me... weeping in the corner
N

Take a look at page 70 of the PDF for bit rates on alternate angle tracks to see if that was the issue.
Also using a CBR intead of VBR has helped in some multi angle issues.
Take a look at this thread where someone had chapter marker causing issues:
http://discussions.apple.com/thread.jspa?messageID=2356388&#2356388

Bit rate too high DVDSP, build stops.

DVD Studio Pro used to be DVD Maestro from Discreet, but I was thinking since Apple bought it long ago, it would have a forum. I searched for DVD and DVDSP and only came up with this forum.
If anybody in here uses DVDSP and if you know the solution I would appreciate help with this.
Upon building this, I did lower the bit rate to a lower size after getting the error message.
As of now I have the BR between 4.2 and 5.2 as the max br.
I'm concerned if I lower it anymore it will start looking like a pixelated mess. Does anybody know how low you can take the rate and still have a good looking project?
The project was taped in HDV. However I encoded it using compressor so I don't think it's an HD file anymore that DVDSP can't read. In the settings you'll see "SD".
I'm using DVD Studio Pro 4.
The settings I used for compressor were:
Video:
Name: MPEG-2 6.2Mbps 2-pass
Description: Fits up to 90 minutes of video with Dolby Digital audio at 192 Kbps or 60 minutes with AIFF audio on a DVD-5
File Extension: m2v
Estimated size: 2.79 GB/hour of source
Type: MPEG-2 video elementary stream
          Usage:SD DVD
Video Encoder
          Format: M2V
          Width and Height: Automatic
                    Selected: 720 x 480
          Pixel aspect ratio: NTSC CCIR 601/DV (16:9)
          Crop: None
          Padding: None
          Frame rate: (100% of source)
                    Selected: 29.97
          Frame Controls Automatically selected:
                    Retiming: (Fast) Nearest Frame
                    Resize Filter: Linear Filter
                    Deinterlace Filter: Fast (Line Averaging)
                    Adaptive Details: On
                    Antialias: 0
                    Detail Level: 0
                    Field Output: Same as Source
          Start timecode from source
          Aspect ratio: Automatic
                    Selected 16:9
          Field dominance: Automatic:
                     Selected Progressive
          Average bit rate: 6.2 (Mbps)
          2 Pass VBR enabled
                    Maximum bit rate: 7.7 (Mbps)
          High quality
          Best motion estimation
          Closed GOP Size: 15, Structure: IBBP
          DVD Studio Pro meta-data enabled
Audio:
Name: AIFF 48:16
Description: 48kHz, 16-bit AIFF stereo audio
File Extension: aiff
Estimated size: unknown
Audio Encoder
          16-bit Integer (Big Endian), Stereo (L R), 48.000 kHz
Error message from DVDSP
Starting DVD Build BIG_DADDY_DVD...
Compiler Initializing...
Precompiling Project BIG_DADDY_DVD
Compiling VMG Information...
Created 8 PGCs in VTSM1
Created 8 PGCs in VMG.
1 Menu(s) will be created...
Compiling Menu PGCs...
Compiling Menu#1 (Menu 1)...
Rendering Menu:Menu 1,Language:1...
Generating Transition: VTSM #01, VOB #1...
Writing VIDEO_TS.VOB
1 VTSs and 1 Titles will be created...
Compiling VTS#1 (Big Daddy compress video)...
Muxing VTS_01_1.VOB
Video Bitrate Too High
Build cancelled
Building was not successful. See log.
I tried the same project in IDVD and it worked like a charm the first time

There is still a DVDSP Forum - it's under Final Cut Studio at https://discussions.apple.com/community/professional_applications/final_cut_stud io
Select "refine this list" in the blue button to nake it easier to find DVDSP related issues.

Bit rate too high

I have been encoding a DVD all day, using the same settings (DVDSP's factory default for an SD DVD). I then had to replace some footage in one of the videos and that is when I strating getting the message about the bit rate being too high. The replaced footage was the same duration as the previous media and no additional video effects or audio were added.
I searched forums which suggested that I should delete a dvdstudiopro.plist file, but I can't find this file! I am running OS Lion 10.7.4 and the latest version of DVD Studio Pro.
Any ideas? (Thanks in anticipation)
Mike

The file is in: your user name/Library/Preferences.
Alternatively, you can download this free tool, which will remove the file for you and provides the option to backup your FCS Preference files.
Mac OS X Lion hides the Library directory by default, to access it temporarily bring Finder to the front, hold the Option key and select it from the Go menu bar item.
To have permanent access type the following into Terminal:
chflags nohidden ~/Library/
execute the command by pressing Return.

Video Bit Rate Too High

According to the video-meter which indicates how much space is left on the DVD - in this case a single layer DVD-R, 4.7 GB - I have only used 3.7, so I have 1 GB to go and still the project won't build. As far as I know the green light in the Status column in the Asset tab means that the clip are good to go, am I wrong?
I havetried to reduce the Bit Rate to minimum, just to test, and still DVDPS prompt with that it is too high.
The following are my settings:
Video System PAL
Aspect Ratio: 16:9
Field Order: Auto (we hate interlacing, don't we?)
Mode: Two Pass VBR
Bit Rate:6.0 mbps
Max Bit Rate: 9.0 mbps
Motion Estimation: Best
And that would be the default setting?
Any help will be thankful!

Yeah..bitrate is so important. Just because your encoder indicates a high of 9.0 mb/s doesn't mean it won't go over that point from time to time - Every encoder introduced bitrate spikes (at least on occasions). You won't see a quality difference with 9.0 over 7.6 with encoders like Compressor. Do what Subquestion says and use AC3 audio unless your client absolutely demands it based on the content (concerts, audio titles, ect). With this you'll need to adjust for video bit rates to accommodate the higher audio bitrate.
Message was edited by: Eric Pautsch1

Is my bit rate too high?!

I'm new to DVDSP but thought I'd figured it out. I'm burning a 30 minute film, with 13 chapters, to HD-DVD. The simulation works fine, and the build and format seems to go through fine, but the resulting dvd works only on my computer (that I burnt it on).
It suddenly occurred to me that maybe by encoding settings are wrong, that perhaps the bit rate is too high? So only my computer can play it...?
The video file is a full 1920x1080 quicktime movie, and the MPEG-2 HD encoding was on about 18mbps, with a max bit rate of around 26mbps. (The footage itself is orginially 35mbps, but that's enormous for an encoded DVD, no?) Perhaps that's why it's saying that the DVD wil be 4.6GB, even though it's only 30 minutes.
I've knocked the bit rate down to 13mbps, with a max of 16mbps. I'll try another burn with those new settings.
Does it sound like I'm onto something here?!
Thanks,
Jamie Kennerley

From your master sequence, you should be exporting an uncompressed (or lossless) 720x480 (NTSC) 16x9 Anamorphic 23.98 file. Bring this into Compressor and adjust your bitrate according to time. The best way is to get a good bitrate calculator. Here's a simple one thats works good:
http://www.videohelp.com/calc.htm
Based on the amount of TIME of your piece you would adjust your bitrate and encode.
1. Export out an uncompressed or lossless 720x480 16x9 Anammorphic @ 23.98 (4444 is a waste since you're not dealing with any Alpha Channel for the encoding)
2. Determine how many minutes you have and find the optimum bitrate with the calculator
3. Plug your file into Compressor and set the correct bitrate and Encode
DVD has a max bitrate of 9.8 for Video so you need to keep it well below this. The only reason you should be going above 8mb/s is if you plan to replicate your disc. Even with that you should be checking your bitrates with a bitrate viewer to make sure every things Ok

Bit Rate too high Error - have specific details about files - please help

Hello-
Just finished a project and went to burn the first DVD. It starts muxing the first mpeg2 video file and comes up with this error. Below are the specs for all the files on the DVD. Please take a look and let me know where I went wrong. Thanks a lot.
Tom J
All video files are:
MPEG-2 60 Min High Quality Encodes out of compressor
All Audio is:
AIFF Stereo 16bit 44.1KHZ
All video and audio lengths are the same, some video tracks have multiple audio tracks
Title---------Video Length--------# of Audio Tracks--------
Main Menu----1:34:27--------------1-----------
Sub Menu 1---30:00----------------1----------
Sub Menu 2---30:00----------------1-----------
Video 1------4:32:00--------------1-----------
Video 2------3:09:00--------------3----------
Video 3------6:25:08--------------3----------
Using my superdrive to burn on a Imation DVD-R 8x
Disc Meter in DVDSP reads 1.3 GB

Hey David-
The total running time of all video (including video
for motion menus) is 1001 seconds (the book told me
to break it down into secon ds).
As far as the bit rate, I checked it and am exporting
currently to a max of 5 with an average of 4.5 (for
the video).
The audio is AIFF all the way, I think encoding in
Dolby is something a newer version fo compressor
does. I have FCP 4.5 with DVDSP 3.
I did export the audio as PCM AIFF, didn't shrin kthe
size in fact enlarged it slightly.
Do you figure if I have a bit rate max of 5 on video
with 3 1.5 bit rate audio tracks, I'll be all right?
Tom J
With your version of FCP & DVDSP, you'll need to encode the audio into Dolby Digital 2.0 with A.Pack, which is a separate program on your hard drive. With Final Cut Studio, Apple did away with A.Pack and merged its functionality into Compressor.

Video bit rate too high when try to build and burn. Audio is AC3

I am trying to burn a dual layer DVD and when I go to build/format the DVD it says that the video bit rate is too high. I am confused by this because this DVD was burned previously without a problem. Changes had to be made to the project and the files were compressed in compressor with the same settings and now they do not work. The audio is AC3 dolby. Is there some setting that needs to be changed in DVDSP? What am I missing here...
I am using FC Studio 2.
Thanks!
Natalie

I don't know exactly what the total length of the video is in minutes, but I do know that it is 6.8GB for a dual layer. Probably at least 3 hours. I don't know what the target bit rate is? Is what you are referring is to what the compression I used in compressor?
I am using the setting DVD Best Quality 150 minutes 3.7mbps for video and the AC3 for the audio.
I am recompressing all the videos again just in case there was a problem with one of the compressions. I don't understand why it isn't working this time when none of the settings or compression had changed.
Thanks!!

"bit rate too high" in menus with overlay files

Hi
I opened in DVDSP4 a project I was working in DVDSP2.
In DVDSP2 the project could build without a problem but now on DVDSP4 during build the program either gets stuck or gives the message "Muxer Bitrate Too High" when it reaches a menu with an overlay file (tiff or jpeg / advanced colors).
I didn't add any new assets to the project, just used transitions between buttons and menus available in DVDSP4.
As soon as I remove the overlay file, build continues succesfully.
Anybody has an idea about why this is happening?

Thank you for looking into this issue
Here is something I tried out:
I set the same file used for the overlay, as background image, and build was successful, which probably means that DVDSP can handle this type of file
Ps. Originally the files were tiff (they worked fine in DVD studio pro 2)
When the build problem started in DVDSP4, I converted them in jpeg but I had the same results.

MUXER Bit rate too high

Similar Messages

Maybe you are looking for