Muzzle flash and similar?

MUZZLE FLASH
is there a muzzle flash effect?

You should be able to find what you want here http://www.detonationfilms.com/Stock_Directory.html
Some are free, some for sale.
I used their Shotgun pack to make this
http://www.youtube.com/watch?v=TBvQPuOFaYA

Similar Messages

Bios Flashing and Recovery

BIOS FLASHING
We do not recommend using the MSI LiveUpdate tool to update your BIOS! It may be okay for updating your drivers, but please do not use it to flash the BIOS in Windows!
Windows-based flashing - If you REALLY insist on flashing the BIOS under Windows, if you encounter any error during flashing, whatever you do, DON'T restart your PC! Try again until the flash is successful, otherwise your board will not start! Disable any anti-virus program (along with any other programs) prior to flashing.
Boards with built-in M-Flash function - While M-Flash work's properly most of the time, it has still proved to be less reliable than the forum tool / manual flash.
Before flashing your BIOS, you must ensure your system is fully stable! Any instabilities can cause a bad flash and create an expensive paper weight. Included with the forum flash tool is MEMTEST, we recommend running this for 2 or more passes prior to a flash.
If you do not understand what your BIOS is, or what it does, please read: >> BIOS. What it is, and all you need to know <<
Our first choice we recommend you use is our own USB flashing tool, developed by Svet.
It is important to note, that the only way to flash the ME extension of the BIOS of modern Intel boards is through the use special processes. The bios versions posted by moderators here: >>BIOSes<< include the additional files to accomplish this. These bios are all official and are directly from MSI.
>>>MSI Forum HQ USB Flashing Tool<<<
If you are unable to use the MSI HQ USB BIOS Flashing Tool
>>How to create a dos bootable USB stick>>
It is important to note that if any BIOS, EC FIRMWARE or any other type of FIRMWARE downloaded from MSI for a manual flash contains an BAT file it must be used. Not doing so will cause the flash to fail and require RMA.
For Intel Users, flash via FPT
Socket LGA 1150 : >>ME 9 FPT files & Instruction>>
Many of the bios versions posted here: >>BIOSes<< Contain a .bat file. All you need to do is extract all of the contents of the archive into the root directory of a DOS bootable USB stick and run the bat file from pure DOS.
Socket LGA 1155 & 2011: >>ME 7&8 FPT Files and instruction<<
Linux users
See this topic: >>Flash your BIOS, the Linux way! [beware the dangers!!]<<
Modified and BETA BIOSes
Use only at your own risk! All BETA BIOS versions posted by the moderators of this forum are directly from MSI and will not effect your warranty.The use of user modified BIOS versions may damage the board and may void your warranty. Exercise extreme caution in regards to user posted BIOS versions. Please also be aware that MSI and this forum can not be held responsible if you trash your mobo by using a modded, beta or otherwise incorrect BIOS.
WHEN IT ALL GOES WRONG...
BIOS RECOVERY
In many cases, provided the 'bootblock' of your BIOS is not corrupted during a bad flash, the BIOS can often be recovered by following the recovery procedures detailed below. NOTE: this recovery method should not be followed for normal practice of updating your BIOS!
For Modern MSI Systems, refer to:
<<Multi-Bios Equipped Mainboards>>
<<Single-Bios Equipped Mainboards>>
Legacy Systems:
For Award BIOS
Make a bootable floppy disk*
Copy the Award flash utility & BIOS file to the said floppy disk
Create an autoexec.bat with "Award_Flash_Utility BiosFilename" in the content (e.g. awdfl823K w6378vms.130)
Sample on how to create an autoexec:
a. On Windows, open the notepad
b. On the notepad, write "awdfl823K w6378vms.130" (without the " ")**
c. Save the file as autoexec.bat
Boot up system with the said floppy (it will take less than 2 minutes before screen comes out)
Re-flash the BIOS & reboot.
*Need a bootable floppy disk? Look here: http://www.bootdisk.com
**Make sure you enter the correct filenames for your flasher program and BIOS ROM file!
For AMI BIOS
Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A569MS23.ROM to AMIBOOT.ROM
Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
When 4 beeps are heard you may remove the floppy disk and restart the computer.
For new boards with AMI BIOS core 8 (4MB)
Discovered by Jack The Newbie:
Of course, the steps are similar to the standard AMI BIOS Recovery Procedure for internal floppy drives (rename corresponding BIOS File to AMIBOOT.ROM, hit CTRL + HOME after starting the system).
What has to be done (tested on P45 Platinum):
1. An optical SATA Drive needs to be connected to one of the Intel ICH10R SATA ports. {After a lot of testing, I found that it does not work with the same optical drive connected to the SATA Ports hosted by the secondary JMicron Controller. Also, using an optical drive on the JMicron IDE/PATA port does not help either.}
2. A proper BIOS File has to be renamed to AMIBOOT.ROM and burned on an empty CD.
3. CMOS-Clear with main A/C power cable removed from PSU has to be performed. {If this step is not done, the system will reboot after pressing CTRL + Home and will not proceed with recovery procedure.}
4. Press CTRL + Home to trigger BIOS Recovery. -> The system should enter BIOS Recovery Routine. {Will basically work with both USB & PS/2 keyboard. However, a PS/2 Keyboard is recommended as the system will respond earlier to PS/2 Keyboard than to USB Devices.}
What should happen now:
1. After pressing CTRL + HOME the LED Status should change to "Intializing Hard Disk Controller" and there should be access to the optical drive connected to the Intel ICH10R SATA ports.
2. It can take up to 30+ seconds until the BIOS File that was renamed to AMIBOOT.ROM is found. {Drive Bay can be opened to try a different CD without turning off or restarting the system.}
3. When the system finds the BIOS File, LED Status will change to "Testing RTC" and there should be a message on the screen indicating that the Flash Recovery Procedure has started.
4. Since the BIOS File is 4MB in size, it will take a while until the BIOS is actually reflashed.
Its also possible that BIOS recovery on boards with AMIBIOS8 can be done using a FAT-formatted USB stick, containing the renamed BIOS file. Be warned, in some circumstances it may take several moments before recovery procedure actually begins. See Bas' reply below for further information.
BIOS recovery on Wind netbooks
See this post here:
https://forum-en.msi.com/index.php?topic=130509.msg982711#msg982711
BIOS recovery on non-UEFI notebooks
In order to recovery this type of system you will need an FAT32 formatted USB stick.
Download the applicable bios from MSI's website and rename this bios.
It must be re-named to either AMIBOOT.ROM or xxxxIMS.ROM / xxxxAMS.ROM You may need to try each way to determine which one is necessary.
Then place the renamed bios onto the root directory of the FAT32 formatted USB stick.
Now you are ready to cover the Notebook.
To do this, remove the AC power cord and battery. Once that has been completed, install the USB stick you prepared earlier.
Now, apply AC power (leaving the battery disconnected) and turn on the notebook. Recovery should begin after 5 minutes.
IF ALL ELSE FAILS...
Locate the BIOS chip on your mainboard. If it is soldered directly to the PCB like...
...then you have no choice but to return the board to your supplier, or to MSI, for replacement.
To request an RMA from MSI, open a support ticket at https://register.msi.com/ocss/
If your BIOS chip is in a socket, like...
...then you may be able to source a replacement BIOS chip, either from MSI, or from a website such as www.badflash.com
Updated 11/21/2013, original post by Stu

A.) Download >>this<< bios archive and place it on your desktop. Do not decompress.
B.) Download and install the >>MSI HQ Forum USB flasher<< .
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB from working bios B.
G.) Once it booted successfully switch to bios A without powering down or rebooting
H.) Now follow the directions and let the tool flash bios A with desired version

What's With Flash and IE7 ?

I have noticed a number of posting of Flash and IE7 troubles,
but they are not close enough or succinctly worded enough to suit
me to glom onto their post with my problem, and I noticed that the
ones who have a problem similar to mine are not being answered. So,
I take it that there is definitely a problem with Flash and IE7,
but no one knows the answer and Microsoft has not risen to the
problem of dealing with a problem that affects hundreds of
thousands of users. I have posted the following on a Microsoft
forum, but have received no reponses there as of yet. Hopefully the
Flash gurus here will be able to rise to the occasion more quickly
than their Microsoft IE counterparts.
If you look at the home page for
http://www.townofstarprairie.com/
using FireFox or IE 6 (with security settings lowered), you'll
notice a scrolling flash text box at the top, and an exact
duplicate of that text box at the very bottom of the page.
If you use IE 7, the one on top does not show but the one on
the bottom of the page does. These two Flash boxes are identical in
every way.
I have toyed with my IE 7 settings to the point where IE was
screaming at me that the world was going to come to an end due to
my low security settings, and still the one on top does not show.
What ever could be the problem with this?
Thank you for any help you can provide!

Nickels55, you are correct....mostly.
One of my acquaintances busted into the weather.com code and
sent me the source. After much trial and error, I found that by
removing the STYLE block completely, I no longer had a problem. I
even tried removing the styles between the STYLE block, but that
didn't work. I had to remove the STYLE tags, too. I tried linking
out to a style page to no avail , btw.
For a while, you can see a bust of this problem at
http://www.townofstarprairie.elitecyberdesign.com/index.cfm?optionid=5877
What's really weird is that this problem only affects the
Flash code ABOVE the Weather.com widget (you would think it would
affect below, but such is not the case), and only in IE 7.
Very strange.

Hello guys..does anybody know how to install and use adobe master collection with the new lion? I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem... I am a new mac users and I'd like t

Hello guys..does anybody know how to install and use adobe master collection with the new lion?
I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

Lab79 wrote:
Are you on Apple's payroll?
well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
good luck with apple dude..
Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
<The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
Great suggestion. You should go with that one, but good luck getting a refund.
Bye

Color correction, muzzle flares and smoke questions

A couple of days ago I directed an action sequence called 'Silent takedown' using Premiere CS5 and After Effects. The goal was to do a very fast paced editing style but still within the realm of 'classic' action films from '90 like Face/Off and Mission Impossible 2. I've got some question regarding visual effects done in After effects. Tell me if you thought they were good or bad. Also the color correction was done in AE and PP. Does the overall movie look good?
Here's a full link again: http://www.youtube.com/watch?v=O62_hYOmlaY
Thanks for watchin'

Well, aside from it being quite disturbing to have a team of 14 year olds turning everyone to blood soup it's got some great camera work.
Your first mistake might have been thinking there's anything worth copying in mission impossible 2. Sorry, had to be said.
Todd's right. The clouds of blood is comical. Maybe tone that down? Right now it just looks like a string of video copilot tutorials one after another. You need to hide effects, and make them feel seamless.
Ask yourselves what are you trying to showcase. If it's post production, you have to tweak those effects and make them look classy. There are shots where bullet holes are appearing in glass and there's little breakage, and no reaction from the actors. You can't just glue in effects. If the actors don't react, you can't use the shot, or it should be changed so you don't notice. Add a shake etc.
If it's editing, then that has to be solid too.
You've got time shifting all over the place without it being stylistic. For example, the guys who walk up off the top are shown in a wide shot that you re-use for the security cam. They enter, put their masks on, walks softly up to the guards and take them out, but then we are inside and the scarface guy is watching action that happened minutes ago on the monitor. If you're going to jump around in time, you need to find a stylistic way to do that. Why not bring the scarface guy's scenes into the lead up, show the monitor, (drop that long shot at the top) to introduce the guys sneaking up. This introduced tension (will scarface notice???) gives you an idea of who the guards are watching out for and drops that opening super wide of the two kids going up against the wall. That shot doesn't work because when you show them super-wide, you get a feeling for how exposed they are and what a terrible job they're doing of "sneaking" up. But it works as security cam footage...
Another example is when you have one of your agents say "good morning gentlemen. He says something strange to men who are in masks and they give him enough time to put a gun to his head and pull the trigger in spite of the face that they're holding their own guns. Then you have the camera exposure flash cuts to the other agent sneaking up...
If you want to make this effect work, you need to use editing to explain why the second guard didn't reflexively shoot the first agent. have the agent say, "good morning gentleman" and start the action of raising the gun. Then flash cut to the other agent sneaking up, then back the the first agent shooting, then back to the second guard being shot. Then all of a sudden you have a frenetic action scene. Right now the pacing feels slow and unrealistic.
The effects go off the rails a bit at the end. The muzzle flashes don't aim in the right direction, and the particle smoke becomes very obviously added in post. One shot in particular is a dude walking through a black smoke cloud from behind a van. Loose that smoke in the second to jump cuts. And if oyu're going to have a smoky enclosed space. you have to add atmosphere in other shots.
If you're not going to use practical effects for the gunshots, you need to cut away. Having a guy explode with particles and stock footage will always be "funny" without having some squibs on set. I know it makes it harder and more complicated, but you have to have the whole package, or it'll always just look like kids messing around and...
... oop, my render is done.

Drop Down in ALV Flashes and Disappears.

Hi All,
I have a strange issue going on. In an ALV (built on CL_GUI_ALV_GRID) I have got an editable field with a drop down option.Now lets say I have 10 rows in an ALV. I chose an entry from the drop down in one of the rows (this happens OK) and immediately after that I go on a click on drop down for any other row. What happens is that the drop down for the new row that I am in flashes and disappears. Now if I click for the drop down again the drop down appears. Basically whenever an entry is selected in one of the rows, drop down function immediately after that does not work. I have a feeling that it has something to do with the data _changed event but I am not sure how to handle that event.
I saw a similar thread [ALV Menu Flash|ALV HANDLE_DATA_CHANGED_FINISHED; but could not figure it out.
Any suggestions ?
Thanks
Anuj

Hi,
Let us see the code and check it
Make the necessary changes at the fieldcatalog
clear ls_fcat.
ls_fcat-fieldname = 'COURSE'.
ls_fcat-col_pos = 5.
ls_fcat-coltext = 'Course'.
ls_fcat-outputlen = 10.
ls_fcat-DRDN_HNDL = 25.
ls_fcat-edit = 'X'.
APPEND ls_fcat to lt_fcat.
and in the class cl_gui_alv_grid we have one method SET_DROP_DOWN_TABLE
and it is having one parameter called iT_DROPDOWN of type LVC_T_DROP
generate the internal table and call the method set_drop_down_table
clear ls_drop.
ls_drop-handle = '25'.
ls_drop-value = 'ABAP'.
append ls_drop to lt_drop.
clear ls_drop.
ls_drop-handle = '25'.
ls_drop-value = 'CRM'.
append ls_drop to lt_drop.
clear ls_drop.
ls_drop-handle = '25'.
ls_drop-value = 'WEBDYNPRO'.
append ls_drop to lt_drop.
CALL METHOD o_grid->set_drop_down_table
EXPORTING
it_drop_down = lt_drop.
Thanks & Regards.
Raghunadh.K

Why the painted content flash and disappear?

I try to run a simple code example from java almanac site but the painted content just flash and disappear. Can any people help to find the reason? Thanks in advance.
Below are the code:
package font;
import java.text.AttributedString;
import java.awt.*;
import java.awt.font.LineBreakMeasurer;
import java.awt.font.TextLayout;
import javax.swing.*;
public class DrawParagraphDemo extends JPanel {
    public DrawParagraphDemo() {
        this.setPreferredSize(new Dimension(500,500));
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        //Create and set up the window.
        JFrame frame = new JFrame("Demo");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        DrawParagraphDemo demo = new DrawParagraphDemo();
        frame.setContentPane(demo);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        demo.drawParagraph((Graphics2D) demo.getGraphics(), "One line of test string", 400);
    public void drawParagraph(Graphics2D g, String paragraph, float width) {
        LineBreakMeasurer linebreaker = new LineBreakMeasurer(
            new AttributedString(paragraph).getIterator(), g.getFontRenderContext());
        float y = 0.0f;
        while (linebreaker.getPosition() < paragraph.length()) {
            TextLayout tl = linebreaker.nextLayout(width);
            System.out.println(tl);
            y += tl.getAscent();
            tl.draw(g, 0, y);
            y += tl.getDescent() + tl.getLeading();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}

Hi i have similar problem and i have followed Camickr's suggestion but it looks like my image was still being painted over here's my code
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import javax.swing.filechooser.*;
* FileChooserDemo2.java is a 1.4 application that requires these files:
*   ImageFileView.java
*   ImageFilter.java
*   ImagePreview.java
*   Utils.java
*   images/jpgIcon.gif (required by ImageFileView.java)
*   images/gifIcon.gif (required by ImageFileView.java)
*   images/tiffIcon.gif (required by ImageFileView.java)
*   images/pngIcon.png (required by ImageFileView.java)
public class Asst4 extends JPanel
                              implements ActionListener {
    static private String newline = "\n";
    private JTextArea log;
    private JFileChooser fc;
     private JPanel display,button;
     JButton load,grey,color;
     private Image image;
     static JComponent newContentPane;
    public Asst4() {
        super(new BorderLayout());
        //Create the log first, because the action listener
        //needs to refer to it.
          display=new JPanel();
          display.setOpaque(true);
          button=new JPanel();
          load=new JButton("Load Image");
          grey=new JButton("Greyscale Image");
          color=new JButton("Color Image");
          load.addActionListener(this);
          //display.setBackground(Color.BLACK);
          //System.out.println("displayable: "+isDisplayable()+" visible: "+isVisible()+" valid: "+isValid());
          //System.out.println("displayable: "+display.isDisplayable()+" visible: "+display.isVisible()+" valid: "+display.isValid());
          display.setSize(500,500);
          button.add(load, BorderLayout.WEST);
          button.add(grey, BorderLayout.CENTER);
          button.add(color, BorderLayout.EAST);
          add(button,BorderLayout.NORTH);
          add(display,BorderLayout.CENTER);
          setVisible(true);
    public void actionPerformed(ActionEvent e) {
               //Set up the file chooser.
               if (fc == null) {
                    fc = new JFileChooser();
                    //Add a custom file filter and disable the default
                    //(Accept All) file filter.
                    fc.addChoosableFileFilter(new ImageFilter());
                    fc.setAcceptAllFileFilterUsed(false);
                    //Add custom icons for file types.
                    fc.setFileView(new ImageFileView());
                    //Add the preview pane.
                    fc.setAccessory(new ImagePreview(fc));
                    //Show it.
               int returnVal = fc.showDialog(Asst4.this,"Load Image");
               //Process the results.
               if (returnVal == JFileChooser.APPROVE_OPTION) {
                    File file = fc.getSelectedFile();
                    Toolkit toolkit = Toolkit.getDefaultToolkit();
                    image = toolkit.getImage(file.getAbsolutePath());
                    MediaTracker mediaTracker = new MediaTracker(this);
                    mediaTracker.addImage(image,0);
                    try {
                       mediaTracker.waitForID(0);
                    } catch (InterruptedException ie) {
                       System.err.println(ie);
                       System.exit(1);
               } else {
                    System.out.println("Loading cancelled by user." );
               fc.setSelectedFile(null);
    protected void paintComponent(Graphics g)
          super.paintComponent(g); // this paints the background
          if(image!=null)
          drawImage(image);
    private void drawImage(Image image){
          Graphics2D g=(Graphics2D)display.getGraphics();
          g.drawImage(image,0,0,null);
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        JDialog.setDefaultLookAndFeelDecorated(true);
        //Create and set up the window.
        JFrame frame = new JFrame("Compsci_375_Assignment_4");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        newContentPane = new Asst4();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.setBounds(50,50,500,500);
           //frame.pack();
        frame.setVisible(true);
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
}Can anyone tell me what's going on and also why if i pack the frame my display panel is disappear?
Thanks a lot

FINAL CUT PRO X (the latest version). I'm trying to upload my video to Youtube, I am getting flashing and orange bar in the frame timeline. How to make it STOP!?

FINAL CUT PRO X (the latest version). I'm trying to upload my video to Youtube, I am getting flashing and orange bar in the frame timeline. How to make it STOP!? It looks like it's rendering somthng but I just want it to stop flashing. I hope it didn't mess up the video...

You're in totally the wrong place... this is the Mac Pro (no Book) forum for hardware. You want
Final Cut Pro X: Professional Applications: Apple Support Communities
Hopefully, FCP X has an autosave feature Like Final Cut Pro Studio so that you may already have a recent copy. If I were in your shoes, I'd try an ESC or something similar before going to a Forced Quit.
Good luck

Adobe flash and iBook G4

I'm trying to view videos on websites that apparently require Flash Player 10, which is of course incompatible with my iBook G4 running on OS X 10.3.9 . However, I've been trying to at least install Flash Player 9 on my computer but it doesn't seem to be working. The .dmg file shows up in my downloads, I mount the disk, but then when I click on the file to start the installation, no installation starts. I went through the process of uninstalling the earlier Flash Player that was already on my computer and now I can't view any videos online. I'm I missing something with FP 9 or is it not compatible with my 10.3.9 ?

If the java and java script versions are available to
and seen by the system, you may need to see if
a different browser can be used to see those web
pages online which seem to fail now. Camino is
Panther 10.3.9 friendly and works well, it can also
replace the older Safari as a default browser as a
preference setting, as a later Safari isn't supported.
Camino brower download: http://caminobrowser.org/
If using the Safari browser, see if resetting it helps.
An earlier and similar topic discussion thread:
http://discussions.apple.com/thread.jspa?threadID=2083013&tstart=0
Hopefully your current issues are soon to be resolved.
Good luck & happy computing!

Flash and Chromium + Sound (ALSA) issue~

I am not able to find out why, but once in a while sound within flash will stop in my Chromium, and I need to shut down the browser and open a new one. It's annoying since I keep browsers open a long time with important websites open etc.
Does anyone have this similar problem? It appears to only happen with flash and everything else works fine.

Try my config.
Ok, used your config as ~/.asoundrc and the problem changed.
Now there's sound but occasionally the sound in flash get's stuck in something like intervals of the length of a second.

Image width difference from flash and photoshop while rotating

Hi,
     ->     I have loaded a image in the flash and a copy of a image in photoshop.
     ->     Then i have checked the width of a image in both the application and they look same.
     ->     In flash window>transform>angle i have given angle 0.7
     ->     In photoshop Image>Image Rotation> Arbitary i have given angle 0.7
     ->     I have checked width of a image in both the application and they are not same.
     Couldn't able to figure it out the reason for the change. Could any one assist me for the same to acheive the same.
Thanks and Regards,
Kamesharan A.

Something like 0.7 won't really show up very well for an example so here's PS CC and Flash CC rotating (approx) 200x200 px red square 20 degrees. They look pretty exact to me (although drawing and placement was done by hand so the slight difference in position is me). Rotation looks good.
Here's what I get from measuring width (but of course the width is of the rotated object), 256px or so on both:
For hand drawn 200px squares (one is 199.2px, etc) that's showing you it's pretty exact.
Mind you if you do a Image Rotation (I did a transform) then it will rotate in Photoshop via a different point. The rotation of the object itself looks the same (and the width is 257) but it's just positioned differently.
Your results should be similar.

Captivate with Flash and Audio Problem

hi there,
I am having lot of flash files and all the audios inside the
flashfiles are "Event" Sync and not default "Streaming" which
brings out more problem like slow in clicking buttons and overall
project speed. but when i change it to Event it works fine at the
same time i cannot do any audio synching and other audio relatted
ewordl....
Please hlp me/...

I am having a similar problem where flash audio loops plays again on the slide after the one with the flash swf. Like it's replaying the sound twice, looping is not turned on... I've had multiple problems with flash and captivate like the new CS4 3d transitions just make it go balistic.

32-bit flash and java plugins freeze firefox and gnome on 64-bit linux

I have installed FC13 64-bit and am running 32-bit firefox 3.6.8 so that I can run flash plugin.
When I start 32-bit firefox 3.6.8 and go to site with flash or java applet, firefox locks up my gnome desktop necessitating a reboot of my computer.
Firefox 3.6.8 32-bit
Flash 10.1r82
Java jdk 1.6.0_15 32-bit
I have used a similar configuration on 32-bit FC13 with 32-bit Firefox 3.6.8 and everything works fine. No lockups.

Hi!
I finally solved this problem. The 32-bit libflashplugin required a 32-bit libcurl library that is not installed by default on 64-bit linux systems (at least not on Fedora). Once I installed 32-bit libcurl libs, flash and java plugins starting magically working.
In my opinion, 64-bit Fedora has done a poor job with 32-bit compatibility viz a viz 32-bit libs. I will submit an improvement ticket to Fedora folks about installing more 32-bit libs on 64-bit distros.
Bobby

Flash and Standards

I'm a big promoter of web standards when it comes to (X)HTML
and CSS. I like to write meaningful code that will work across each
browser/platform.
This is where the question comes in: If I was to learn Flash
and Actionscript, where would I start? I would want my code to be
as meaningful and 'standards' promoting as possible.
Does anyone have some beginners resources to learn standards
based flash? Thanks in advance.

On 2007-04-05 07:56:23 -0700, "Mike Vitoroulis"
<[email protected]> said:
> I'm a big promoter of web standards when it comes to
(X)HTML and CSS. I like to
> write meaningful code that will work across each
platform.
>
> This is where the question comes in: If I was to learn
Flash and Actionscript,
> where would I start? I would want my code to be as
meaningful and 'standards'
> promoting as possible.
>
> Does anyone have some beginners resources to learn
standards based flash?
> Thanks in advance.
There are not necessarily standards in Actionscript. In order
to have
standards, generally you need two or more similar products
(like
browsers) that are competing in the market place. Instead,
like most
programming, there are design patterns. If you want to write
robust
code you should be taking advantage of Actionscript 2.0 at
least. And
to leverage all of it's capabilities you should try to start
writing
classes.
Here is a book I recommend. It is a really good one if you
have any
sort of programming background.
http://www.friendsofed.com/book.html?isbn=1590595947

Outlook "Manage Rules and Alerts" flashes and wont fully open

Hi ,
one of my custom got a tricky problem. His rules flashes on every PC. have tried change pc, reinstall outlook for several version (2k3,2k10,2k13). For server side, Exchange2010, have tried move user to another mailboxdabase. but nothing worked.
Each time i click "manage Rules and alerts", a log will recorded in windows app log "operation fail", Event id 27(not sure the exact words in english version. it is “操作失败” in chinese). detail message :
System
Provider
[ Name]
Outlook
EventID
27
[ Qualifiers]
16384
Level
4
Task
0
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-04-08T00:58:05.000000000Z
EventRecordID
740183
Channel
Application
Computer
XXXXXXXXXXX.com
Security
EventData
操作失败。
I think it is a server-side problem, until i found OWA works fine. which really drive me crazy.
after some google, and search in forum, i found a similar thread: http://social.technet.microsoft.com/Forums/office/en-US/f6b75a36-9af9-4153-a5f9-57061a5729c0/outlook-2010-manage-rules-and-alerts-only-flashes-and-wont-fully-open?forum=exchangesvrclientslegacy
After follow the advise to delete all rules via MFCMAPI tool, seems still not help. i could only post a question here.
thanks for any advise
Go Patriots

Glad to hear that. For the "Stop Processing More Rules", you can refer:
http://www.outlook-tips.net/tips/tip-42-stop-processing-more-rules/
http://www.msoutlook.info/question/340
Best Regards,
Steve Fan
TechNet Community Support

Muzzle flash and similar?

Similar Messages

Maybe you are looking for