MV45AFZZ USEREXIT_SAVE_DOCUMENT Change VBEP-ETTYP Value

Greetings,
   In VA01/VA02, credit check processing seems to occur after userexit_save_document_prepare leaving me only with userexit_save_document. In userexit_save_document, I am trying to change the schedule line category depending on VBUK-CMGST value.
My question is whether I need a BADI or is there some other formula/user-exit available. I have tried to change the value in userexit_save_document and it changes but the change does not carry through to the database. When I leave the user-exit, the value is ok but somewhere down the road it gets lost.
Here is my current userexit code for the include called from within userexit_save_document:
form zz_zv45cor_credit.
check sy-tcode = 'VA02' or sy-tcode = 'VA01'.
check xvbep[] is not initial.
loop at xvbap
    where updkz <> 'D'
      and ( pstyv = 'TAC' or pstyv = 'TAN' or pstyv = 'TAS' ).
    clear xvbep.
    loop at xvbep where posnr = xvbap-posnr
                    and wmeng <> 0
                    and updkz ne 'D'.
      if vbuk-cmgst = 'B' and xvbep-ettyp ne 'Z0'.
        if sy-tcode = 'VA02' and xvbep-updkz is initial.
          move-corresponding xvbep to yvbep.
          append yvbep.
          xvbep-updkz = 'U'.
        endif.
        xvbep-ettyp = 'Z0'.
        modify xvbep.
      elseif vbuk-cmgst = 'D' and xvbep-ettyp ne 'CP'.
        if sy-tcode = 'VA02' and xvbep-updkz is initial.
          move-corresponding xvbep to yvbep.
          append yvbep.
          xvbep-updkz = 'U'.
        endif.
        xvbep-ettyp = 'CP'.
        modify xvbep.
      endif.
    endloop.
endloop.
endform.                    " zz_zv45cor_credit
Any help or ideas is appreciated..
Thanks,
Tim

Hello Brian,
This was a long time ago and I don't really remember the specifics anymore. We ended up divesting the company that this code was intended for and as such this code or requirement is no longer in our system. However I seem to recall that I was not able to change the XVBEP table in this user exit no matter the XVBEP values - but don't hold me to that. Sorry I can't be of more help. I did try to look through version management, etc but I just don't see that I have this code so perhaps I was doing this in a sandbox instance.
Thanks,
Tim

Similar Messages

Changing the Condition value in Quatation only and not in Order

Hi Gurus,
We have a Requirement from Client in which the Client should be Able to change the condition Value PR00 in the Quotation and not in Sales order......can someone please let me know how's that possible?
Because if we try to make Changes in Condition Type in V/06 it will also allow changes in Sales Order....

Hi
You can use user-exit USEREXIT_PRICING_PREPARE_TKOMP in the include MV45AFZZ.
IF VBAK-AUART = (Your quotation type)
LOOP AT XKOMV.
IF XKOMV-KSCHL = 'PR00'.
SELECT * FROM T685A INTO TABLE I_T685A WHERE KSCHL = 'PR00'.
READ TABLE I_T685A WITH KEY KSCHL = XKOMV-KSCHL.
I_T685A-KMANU = 'C'.
MODIFY I_T685A INDEX SY-TABIX.
MODIFY T685A FROM TABLE I_T685A.
REFRESH I_T685A.
ENDIF.
ENDLOOP.
like this discuss with your abapper and build the logic
regards
Prashanth

BAPI_CUSTOMERQUOTATION_CHANGE - error while changing a condition value

Hallo Gurus,
I am trying to use tshi BAPI BAPI_CUSTOMERQUOTATION_CHANGE to change a condition value of a condition record of a quotation.
Every time I execute the BAPI, instead of the condition tyoe being changed, a new record is added to the list of conditions!
Can someone please help!
Thsi is my piece of code::
itab_BAPISDH1X-UPDATEFLAG = 'U'.
append itab_BAPISDH1X.
itab_BAPICOND-ITM_NUMBER = '10'.
itab_BAPICOND-COND_ST_NO = '31'.
itab_BAPICOND-COND_COUNT = '00'.
itab_BAPICOND-COND_TYPE = 'ZST3'.
itab_BAPICOND-COND_VALUE = '15.00'.
itab_BAPICOND-COND_UPDAT = 'X'.
append itab_BAPICOND.
itab_BAPICONDX-ITM_NUMBER = '10'.
itab_BAPICOND-COND_ST_NO = '31'.
itab_BAPICOND-COND_COUNT = '00'.
itab_BAPICONDX-COND_TYPE = 'ZST3'.
itab_BAPICONDX-UPDATEFLAG = 'X'.
itab_BAPICONDX-COND_VALUE = 'X'.
append itab_BAPICONDX.
CALL FUNCTION 'BAPI_CUSTOMERQUOTATION_CHANGE'
EXPORTING
    salesdocument                = p_vbeln
QUOTATION_HEADER_IN          =
    quotation_header_inx         = itab_BAPISDH1X
tables
    return                       = itab_BAPIRET2
   CONDITIONS_IN                = itab_BAPICOND
   CONDITIONS_INX               = itab_BAPICONDX
Thanks!
Mukta

Hmm...
Change the following....and check..
itab_BAPICONDX-ITM_NUMBER = '10'.
itab_BAPICOND-COND_ST_NO = '31'.
itab_BAPICOND-COND_COUNT = '00'.
itab_BAPICONDX-COND_TYPE = 'ZST3'.
itab_BAPICONDX-UPDATEFLAG = 'X'.
itab_BAPICONDX-COND_VALUE = 'X'.
append itab_BAPICONDX.
"change the above to.....
ab_BAPICONDX-COND_TYPE = 'X'.
append itab_BAPICONDX.
The BAPICONDX.. should contain only X.. in the fields which you want to update.. try this change..and let us know if it works.
Also have a look at the FUNCTION MODULE DOCUMENTATION for this bapi in SM37.
Cheers...

BI-IP: Change of characteristic value in ABAP EXIT planning function

Hi
I have created a planning function of the type EXIT with reference data without blocks. In method IF_RSPLFA_SRVTYPE_IMP_EXEC_REF~EXECUTE I am going to implement my code.
Now, one of the purposes is to update the VALIDTO of an existing record. Is it possible to modify the characteristic values directly in C_TH_DATA (thus allowing me to just update the date directly on the record) or can I only append records?
Cheers!
/Karsten

Hi Larse,
Yes you can change directly your value in a record withou appending a new one,but still it will create 2 records in the delta buffer ready to be save to the cube.
Reagrds,
Eitan.

How to Change a Default Value from Drop Down Box displayed in Web Dynpro?

Hi,
How to Change a Default Value from 'High' to 'Low' in a Drop Down Box for RANGE field displayed in Standard Web Dynpro Component. I saw a Default Value set for a RANGE field in View Context When I select that field and click on Display. I am seeing Default Value set it to 'HI'. Please let me know how to change from HIgh to Low.
I appreciate your help!
Thanks,
Monica

hi,
use the set_attribute( ) method now to set the attribute with a particular key eg HIGH in ur case
// u can use the code wizard( control +f7) this code will be auto generated when u select the
//radio button to read the context node
DATA lo_nd_cn_node TYPE REF TO if_wd_context_node.
DATA lo_el_cn_node TYPE REF TO if_wd_context_element.
DATA ls_cn_node TYPE wd_this->element_cn_node.
* navigate from <CONTEXT> to <CN_NODE> via lead selection
lo_nd_cn_node = wd_context->get_child_node( name = wd_this->wdctx_cn_node ).
* get element via lead selection
lo_el_cn_node = lo_nd_cn_node->get_element( ).
* set single attribute
lo_el_cn_node->set_attribute(
name = `ATTribute name.`
value = 'LOW' ).
it will solve ur query ..
also refer to this component
wdr_test_events -> view dropdownbyidx and dropdownbykey ->method name onactionselect.
regards,
amit

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

How to change the column value which is coming from DO by a calculated field?

Hi all,
I want to change a column value based on my calculated field value. I have a column which is coming from DO which is based on External Data Source. I have a calculated field in my report. When there is any change in the calculated field then the column which is coming from DO needs to be changed. It means the DO needs to get updated when there is a change in the calculated field. Or like if the calculated field meets some condition then I need to change/update the same in the DO. This has to be done on the fly. the report should not submitted for this. when there is a change in the calculated column the DO column needs to get updated.
Thanks,
Venky.

Ok, I've been a customer for very many years, I'm on a fixed retirement
income. I need to reduce my bills, my contract ends in Dec. I will be
pursuing other options unless I can get some concessions from Verizon. My
future son-in-law was given this loyalty plan, so I know this is a
reasonable request. My phone number is (removed) acct number
(removed)
>> Personal information removed to comply with the Verizon Wireless Terms of Service <<
Edited by: Verizon Moderator

How can I change the initial value of the field approve_or_reject?

Hello Workflow Gurus
We are using SRM 5.00(SRM SERVER 550) and as per the requirement, I have to make the Reject radio button as default checked on the Approver's screen.
We are using the SAP Standard Workflow WS14500015.
I found out the Standard task TS14508044 (SC approval per Item)which has one field in its container i.e. approve_or_reject ,based on the Initial value of this field , the radio button is behaving...
approve_or_reject EQ 0 i.e. Approve
approve_or_reject EQ 1 i.e. Reject
Now my requirement is to change the initial value of this field from 0 to 1 so that Reject radio button comes as checked by default into this standard SAP workflow task TS 14508044...
Kindly help me and let me know the procedure to change this.
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE CHANGES INTO STANDARD SAP WORKFLOW ???
Thanks and regards
Ankur Goyal
09823448654

Well Iam not much sure about how you are trying to approve the shopping cart workitem b ut last week i faced a similar issue while apporving the workitems I was able to update the contianer element Apporve_or_reject element by using the FM BBP_PDH_WFL_WI_APPROVE and BBP_PDH_WFL_WI_REJECT ... These two fm will take the responsibility of updating the element with respective value as, if you approve the it will be populated with 0 and if you reject the the element will be updated with 1....
Please check the thread where I updated the thread in [SRM Workflows|Problem while approving SC from Blackberry !;
PLEASE LET ME KNOW THAT IS IT WISE TO MAKE THE
CHANGES INTO STANDARD SAP WORKFLOW ???
Modifying the standard workflow is not recommended.....

How can I change the default value of a command ?

I want to be able to change the default value of a comand when the vi
is running. (I know how to do that with a right click when the vi is
not running).
In fact I would like the user of the vi to be able to choose a new default value for a command.
How can I do that ?

You can't do this on a running VI. If you have an idle VI, you can open a reference to that VI and use an invoke node with the Make Current Values Default method, but that will only work in LV (i.e. not in an EXE) and will affect all the controls. What you can do is save the values to a file and load them when the program starts. OpenG's File I/O package includes some VIs which will help you with that.
Try to take over the world!

Is it possible to change the display value of a domain-based attribute?

Hello,
I've selected a domain-based attribute for one of the leaf member attributes in the same entity, aka parent id, since it's a self-referencing entity. However, I cannot find a way to display anything but the code value in the drop-down (see below).
Is there a way to change the display value so that I can choose the attribute from the entity from which I want the user to choose? In other words, I would like to display the hierarchy name instead of the code, which is really just the primary id.
Thanks in advance!
Ben Lezin

1. In the explorer page, settings dialog, you can change the display format to show only name.
2. We cannot use other freeform attribute as DisplayFormat, rather than Code Name. So there are 2 option here:
a. Remove HierarchyName attribute and just use Name attribute. In the next release, we will allow give Name, Code attribute a displayname, so you can give Name display name as "HierarchyName" in the SQL Vnext release.
b. Make a Business Rule to update Name when HierarchyName is changed.

How to change the variable value in fox formula?

Hi All,
    Please help me achieve this scenario,
         in the variable selection screen , i wil give some i/p like, calyear(0calyear) = 2008.
      In planing function using FOX formula, i must be able change the variable value to 2009.
Will it be possible to achieve this, can we change a variable value using FOX formula, if possible
please let me knw how to achieve this.
Thanks n Regards,
Priya.

Hi Priyadarshini,
i dont know what is your requirement exactly.If you can give a better explanation of ur requirement we can help you. But to answer your question yes we can get new values for the variable in the planning function.
for this you need to couple the planning function together with the planning filter in a planning sequence. This planning filter should have the variable that you wanted to change. In the WAD when you want to call this planning sequence there is an option to call variable screen. If you enable this, it will pop up the variable screen to get this value again.
Guess this was helpful.
Regards.
Shafi.

Unable to change the parameter value in the configtool

Hi All,
Error
In the Configtool I have changed the custom value to u2018TRUEu2019 of the key u201Cume.superadmin.activatedu201D under Cluster-data -> instance -> server -> services -> com.sap.security.caore.ume.service. Now I am trying to change the value again to u2018FALSEu2019 but the value is not getting updated even after the server is restarted OS level. Please advise.
System details:
SAP: PI 7.0
DB: MS SQL 2000
OS: Windows 2003 server
Thanks in advance.
Regards,
Dinesh

Hi Dinesh,
There are a variety of reasons why this is not getting reflected :
1) When you make changes if you use an AS ABAP or LDAP directory as the data source. The default values of the UME properties assume the database of the AS Java as the data source. This requires you to reconfigure the data source before you can restart the AS Java.
2) The cluster nodes have not been restarted after the changes
3) Changes apart from global configuration have also been made elsewhere.
4)properties as described in Editing UME Properties.
Editing UME Setting:
a) Start the Config Tool by executing
\j2
ee\configtool\configtool.bat.
b) In the tree, navigate to Global server
configuration services com.sap.security.core.ume.
service.
The list of UME properties appears.
Regards
joel
Edited by: joel trinidade on Apr 15, 2009 12:29 PM

How to change the characteristic value in a item of sales order by FM?

Hi experts,
I guess the FM BAPI_SALESORDER_CHANGE can implement my requirement. But I have made many testing program, that's all failed. I don't know which part is not correct. So could you give a very simple sample to me? Just change the characteristic value in a item of sales order, not do any change for other parts. Thanks in advanced.
Regrads

Hi Birendra,
Thanks for you explain. I follow your guide to wirte abap program. But related characteristic value still not changed in SO main screen. could you give me some suggestion? Thanks a lot!
type-pools: IBCO2,
            IBXX.
data: l_CUOBJ type CUOBJ_VA,
      l_ibase type IBCO2_IBASE_REC,
      l_CONFIGURATION type IBCO2_INSTANCE_TAB2,
      w_CONFIGURATION type IBCO2_INSTANCE_REC2,
      l_ROOT_OBJECT type IBXX_BUSINESS_OBJECT.
data: t_IBCO2_VALUE_TAB type IBCO2_VALUE_TAB,
      w_IBCO2_VALUE_REC type IBCO2_VALUE_REC.
select single CUOBJ
into l_CUOBJ
from VBAP
where VBELN = '0020030609'
    and POSNR = '000020'.
CALL FUNCTION 'CUCB_GET_CONFIGURATION'
    EXPORTING
      INSTANCE                           = l_CUOBJ
    IS_BUSINESS_OBJECT                 =
    IV_MOMENT                          =
    IV_WITH_DB_INSTANCE                =
   IMPORTING
     IBASE                              = l_ibase
     CONFIGURATION                      = l_CONFIGURATION
    EO_CBASE_REF                       =
EXCEPTIONS
    INVALID_INPUT                      = 1
    INVALID_INSTANCE                   = 2
    INSTANCE_IS_A_CLASSIFICATION       = 3
    OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at l_CONFIGURATION into w_CONFIGURATION.
l_ROOT_OBJECT = w_CONFIGURATION-OWNER.
t_IBCO2_VALUE_TAB[] = w_CONFIGURATION-values[].
read table w_CONFIGURATION-values into w_IBCO2_VALUE_REC with key ATINN = '0000000222'.
w_IBCO2_VALUE_REC-ATWRT = 'TMP'.
modify w_CONFIGURATION-values from w_IBCO2_VALUE_REC index sy-tabix.
modify l_CONFIGURATION from w_CONFIGURATION index 1.
clear: w_CONFIGURATION.
endloop.
CALL FUNCTION 'CUCB_SET_CONFIGURATION'
EXPORTING
    ROOT_INSTANCE                      = l_CUOBJ
IS_CBASE_HEADER                    =
CHANGING
    CONFIGURATION                      = l_CONFIGURATION
EXCEPTIONS
INVALID_INPUT                      = 1
INVALID_INSTANCE                   = 2
INSTANCE_IS_A_CLASSIFICATION       = 3
OTHERS                             = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CUCB_CONFIGURATION_TO_DB'
EXPORTING
    ROOT_INSTANCE                       = l_CUOBJ
    ROOT_OBJECT                         = l_ROOT_OBJECT
FORCE_NEW_INSTANCE                  =
IV_WITHOUT_COMMIT_UPDATE            = ' '
IV_MATERIAL                         =
IV_LOCATION                         =
IV_TECHS                            =
IMPORTING
NEW_INSTANCE                        =
TABLES
EXP_NEW_NESTED_CUOBJS               =
EXCEPTIONS
INVALID_INSTANCE                    = 1
INVALID_ROOT_INSTANCE               = 2
NO_CHANGES                          = 3
ALREADY_REGISTERED_FOR_UPDATE       = 4
INSTANCE_IS_A_CLASSIFICATION        = 5
OTHERS                              = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Fm to change the condition value in sales order pricing

Hi Friends,
I need a FM to change the Pricing value that is auto calculated in the sales order. It needs to be overwritten. BAPI_SALESORDER_CHANGE I don't think will do it. It can be used only to update the condition type and the condition amount but not the condition value.
Can someone please help me. I've been stuck with this for quite sometime.
Thanks,
Dikshitha G

Try these BAPI's
BAPI_LISTING_CONDITIONS,
BAPI_AGREEMENTS
Regards,
Rajasekhar Reddy.

BADI for Changing Deployment Rounding Value

Hello All,
During my Deployment run I need to consider the rounding value from the /sapapo/marm table and not from the product master. So I need a badi or user exit to change the rounding value for deployment run. Do let me know how I can achieve this.
Thanks,
Siva.

Dear Tiemin,
Thanks for your reply. But I need a BADI which needs to work when there is no Fair Share situation. It will be great if you provide me which suits for it.
Thanks,
Siva.

MV45AFZZ USEREXIT_SAVE_DOCUMENT Change VBEP-ETTYP Value

Similar Messages

Maybe you are looking for