Mview refresh and ORA-12008 error
I am getting the following when I try to refresh a materialized view. This error occurs the first time I try to refresh, then if I try again, the refresh is successful.
Most of what I have been able to glean about this error is that it is related to M$log changes, however, this view does not use nor build upon an other views that use, mview logs. Any ideas?
ORA-12008: error in materialized view refresh path
ORA-01555: snapshot too old: rollback segment number 13 with name "_SYSSMU13$" too small
ORA-02063: preceding line from db1
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2537
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2743
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2712
ORA-06512: at line 2
Hi j_70!
I'm not exactly sure about the answer, but I guess that the ORA-01555 is the main problem. Have you tried to grow your Undotablespace? I think that the refresh of the MVIEW takes a long time (like a long SELECT-Statement) and if there are many UPDATE and INSERT-Statements while the refresh is in progress than ORA-01555 may be the consequence.
If you have Oracle 10g use the Undo-Advisor to look for the problem.
Hope this helps!
Similar Messages
-
ORA-12008: error in materialized view refresh path with ORA-01652
I have a temp tablespace with 2 tempfiles of 2GB each (total 4GB) but still refresh of materialized view is failing with following error:
5646690 - BIS Materialized View Refresh Program
ORA-12008: error in materialized view refresh path
ORA-01652: unable to extend temp segment by 128 in tablespace TEMP1
I checked and temp ts is completly filled
SQL> select TABLESPACE_NAME, BYTES_USED, BYTES_FREE from V$TEMP_SPACE_HEADER;
TABLESPACE_NAME BYTES_USED BYTES_FREE
TEMP1 2147483648 0
TEMP1 2147483648 0
My question is how do I find out how much space I need for temp tablespace. what 's the best practise to size temp tablespace when running refresh. refresh is done by client who is submitting a request thru ebiz apps so I 'd like to size it correctly without having to keep guessing.
Thanks so much in advance for any helpHello,
Temp tablespace size depends how much sort by , order by operation your application performing. You can create new temp tablespace and drop old one with bigger file size
CREATE TEMPORARY TABLESPACE TEMP02 TEMPFILE '\mypath_to_temp\TEMP02' SIZE 256M REUSE AUTOEXTEND ON NEXT 256M MAXSIZE 8192M EXTENT MANAGEMENT LOCAL;
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP02;
Drop tablespace temp including contents; -- Make sure you delete on temp data files.Here is link for your reading purpose
http://www.idevelopment.info/data/Oracle/DBA_tips/Tablespaces/TBS_3.shtml
Regards
Edited by: OrionNet on Mar 6, 2009 6:15 PM -
Materialized View, ORA-12008: error in materialized view refresh path
I want to refresh a materialized view, but I get an ORA-12008 error.
Does anybody have an idea? I do not find any errors in my refresh statement.
CREATE MATERIALIZED VIEW scott.dummy_mv
TABLESPACE test
BUILD IMMEDIATE
USING INDEX TABLESPACE idx_test
REFRESH
START WITH sysdate
NEXT ROUND(SYSDATE)+5/24
WITH PRIMARY KEY
ENABLE QUERY REWRITE
AS
SELECT KM.ID ID
,KM.USERNAME USERNAME
,KM.ABTID ABTID
FROM my_table KM
scott@orcl>desc dummy_mv
Name Null? Typ
ID NOT NULL NUMBER(4)
USERNAME NOT NULL VARCHAR2(30)
ABTID NOT NULL NUMBER(4)
scott@orcl>
BEGIN
SYS.DBMS_JOB.REMOVE(6579);
COMMIT;
END;
DECLARE
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
( job => X
,what => 'dbms_refresh.refresh(''"scott"."dummy_mv"'');'
,next_date => to_date('07.01.2009 05:00:00','dd/mm/yyyy hh24:mi:ss')
,interval => 'ROUND(SYSDATE)+5/24 '
,no_parse => FALSE
SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
COMMIT;
END;
scott@orcl>exec dbms_refresh.refresh('dummy_mv');
BEGIN dbms_refresh.refresh('dummy_mv'); END;
FEHLER in Zeile 1:
ORA-12008: error in materialized view refresh path
ORA-00947: not enough values
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 820
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 877
ORA-06512: in "SYS.DBMS_IREFRESH", Zeile 683
ORA-06512: in "SYS.DBMS_REFRESH", Zeile 195
ORA-06512: in Zeile 1
scott@orcl>crupper wrote:
I get the same error:
scott@orcl>exec dbms_mview.refresh('dummy_mv','c');
BEGIN dbms_mview.refresh('dummy_mv','c'); END;
FEHLER in Zeile 1:
ORA-12008: error in materialized view refresh path
ORA-00947: not enough values
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 820
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 877
ORA-06512: in "SYS.DBMS_SNAPSHOT", Zeile 858
ORA-06512: in Zeile 1
I would first check the "query" information of the DBA_SNAPSHOTS/DBA_MVIEWS dictionary views if it reveals anything obvious.
But it looks more like an internal error while processing the refresh. You can get more information about the error by tracing the session. A "alter session set sql_trace = true;" before running the refresh should be sufficient. Disconnect afterwards and check the generated trace file for errors either using "tkprof" and checking the output or by manually searching for "err=" in the trace file.
Which 4-digit version of Oracle are you using?
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/ -
ORA-12008: error in materialized view refresh path ;;; PLZ HELP ME
Hi all,
I 'm using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0; I got these errors when I tried to refresh my materialized view ;
ORA-12008: error in materialized view refresh path
ORA-01555: snapshot too old: rollback segment number 5 with name "_SYSSMU5$"
too small
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2255
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2461
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2430
I don't understand what mean these errors and why i got them?
Someone can help me please ?
Thanks
regards,thank you Justin,
I found in my alertDB.log this line ;
Mon Aug 20 03:00:54 2007
ORA-01555 caused by SQL statement below (SQL ID: 64a7sdbbvknta, Query Duration=1021 sec, SCN: 0x0004.4a145344):
Mon Aug 20 03:00:54 2007
INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO "MANAGEMENT"."MVIEW_COMPUTERS"("ID","WINVERSION","ANTIVIRUS","GUID","INSTALLDT","CONNECTION_TYPE","GROUPID
","QUOVACOUNTRY") SELECT "C"."ID","C"."WINVERSION","C"."ANTIVIRUS","C"."GUID","C"."INSTALLDT","C"."CONNECTIONTYPE","C"."GROUPID","C"."QUOVACOUNTRY"
FROM "MANAGEMENT"."COMPUTERS" "C"
So i execute this query to found the TUNED_UNDORETENTION value ;
SELECT *
FROM V$UNDOSTAT v
WHERE v.MAXQUERYID = '64a7sdbbvknta'
and i have this result :
BEGIN_TIME 20070820 02:53:42
END_TIME 20070820 03:03:42
UNDOTSN 1
UNDOBLKS 51242
TXNCOUNT 5012
MAXQUERYLEN 1060
MAXQUERYID 64a7sdbbvknta
MAXCONCURRENCY 21
UNXPSTEALCNT 0
UNXPBLKRELCNT 0
UNXPBLKREUCNT 0
EXPSTEALCNT 14
EXPBLKRELCNT 51392
EXPBLKREUCNT 0
SSOLDERRCNT 1
NOSPACEERRCNT 0
ACTIVEBLKS 606920
UNEXPIREDBLKS 19896
EXPIREDBLKS 612728
TUNED_UNDORETENTION 1841
I don't know exactly which value i should set my parameter?
Message was edited by:
HAGGAR -
Materialed View Refresh Error ORA-12008: error in materialized view refresh
Hi,
I am trying to refersh the following materialized view with the below command and getting the below error
begin
DBMS_MVIEW.REFRESH('GLVW_MIS_ADB');
end;
The following error has occurred:
ORA-12008: error in materialized view refresh path
ORA-12840: cannot access a remote table after parallel/insert direct load txn
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 803
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 860
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 841
ORA-06512: at line 2
Please advice on this.
Thanks & Regards,
Kartik$ oerr ora 12840
12840, 00000, "cannot access a remote table after parallel/insert direct load txn"
// *Cause: Within a transaction, an attempt was made to perform distributed
// access after a PDML or insert direct statement had been issued.
// *Action: Commit/rollback the PDML transaction first, and then perform
// the distributed access, or perform the distributed access before the
// first PDML statement in the transaction.
$ -
Error: ORA-12008: error in materialized view refresh path
Hello Dba' s
We are on 12.0.6 EBS with 10.2.0.5 DB on Sun solaris SPARC 64 bit.
We are getting below error while Refreshing Materialized View.
Start of log messages from FND_FILE
Error: ORA-12008: error in materialized view refresh path
ORA-00600: internal error code, arguments: [kcblasm_1], [103], [], [], [], [], [], [] Occured while Refreshing Materialized View
End of log messages from FND_FILE
Not sure how to proceed.We have just upgraded our database from 10.2.0.3 to 10.2.0.5.
Also we still have our test instance with 10.2.0.3 database ,there refreshing MV completed successfully.
Also refreshing through TOAD gives below error:-
BEGIN
DBMS_SNAPSHOT.REFRESH(
LIST => 'XXPPL.XXPPL_OPM_TRANSACTIONS_MV'
,PUSH_DEFERRED_RPC => TRUE
,REFRESH_AFTER_ERRORS => FALSE
,PURGE_OPTION => 1
,PARALLELISM => 0
,ATOMIC_REFRESH => TRUE
,NESTED => FALSE);
END;
Error at line 2
ORA-12008: error in materialized view refresh path
ORA-00600: internal error code, arguments: [kcblasm_1], [103], [], [], [], [], [], []
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2256
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2462
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2431
ORA-06512: at line 2
Please advice.
Thanks,
Edited by: user12209274 on Nov 23, 2010 2:10 AMthank you Justin,
I found in my alertDB.log this line ;
Mon Aug 20 03:00:54 2007
ORA-01555 caused by SQL statement below (SQL ID: 64a7sdbbvknta, Query Duration=1021 sec, SCN: 0x0004.4a145344):
Mon Aug 20 03:00:54 2007
INSERT /*+ BYPASS_RECURSIVE_CHECK */ INTO "MANAGEMENT"."MVIEW_COMPUTERS"("ID","WINVERSION","ANTIVIRUS","GUID","INSTALLDT","CONNECTION_TYPE","GROUPID
","QUOVACOUNTRY") SELECT "C"."ID","C"."WINVERSION","C"."ANTIVIRUS","C"."GUID","C"."INSTALLDT","C"."CONNECTIONTYPE","C"."GROUPID","C"."QUOVACOUNTRY"
FROM "MANAGEMENT"."COMPUTERS" "C"
So i execute this query to found the TUNED_UNDORETENTION value ;
SELECT *
FROM V$UNDOSTAT v
WHERE v.MAXQUERYID = '64a7sdbbvknta'
and i have this result :
BEGIN_TIME 20070820 02:53:42
END_TIME 20070820 03:03:42
UNDOTSN 1
UNDOBLKS 51242
TXNCOUNT 5012
MAXQUERYLEN 1060
MAXQUERYID 64a7sdbbvknta
MAXCONCURRENCY 21
UNXPSTEALCNT 0
UNXPBLKRELCNT 0
UNXPBLKREUCNT 0
EXPSTEALCNT 14
EXPBLKRELCNT 51392
EXPBLKREUCNT 0
SSOLDERRCNT 1
NOSPACEERRCNT 0
ACTIVEBLKS 606920
UNEXPIREDBLKS 19896
EXPIREDBLKS 612728
TUNED_UNDORETENTION 1841
I don't know exactly which value i should set my parameter?
Message was edited by:
HAGGAR -
ORA-12008: error in snapshot refresh path
I am getting this error even i am specifying to use other rollback segment
ALTER ROLLBACK SEGMENT R02 SHRINK;
SET TRANSACTION USE ROLLBACK SEGMENT R02;
alter materialized view PAY_REV_BREAKUPWITHWOFF NOLOGGING;
BEGIN dbms_mview.refresh('PAY_REV_BREAKUPWITHWOFF') ; END;
ERROR at line 1:
ORA-12008: error in snapshot refresh path
ORA-01562: failed to extend rollback segment number 1
ORA-01628: max # extents (505) reached for rollback segment SYS_RBS
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 617
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 674
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 654
ORA-06512: at line 1The reason why it's still using SYS_RBS seems to be that since you are refreshing a materialized view, it might be doing parallel DMLs. In this case the clause of specifying a particular rollback segment is ignored.
In addition to the above, try taking the rollback segment offline by executing
alter rollback segment SYS_RBS offline;
and then drop it by running
drop rollback segment SYS_RBS;
Then create new one and see if it works.
if the above mentioned doesn't work somehow...
try to change the extents storage parameter by running
alter rollback segment sys_rbs storage (MAXEXTENTS 1000);
Can't be sure as i currently don't have access to my system
Hope this helps
Message was edited by:
thrilller -
ORA-12008: error in materialized view refresh path... Bug?
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
PL/SQL Release 11.2.0.3.0 - Production
CORE 11.2.0.3.0 Production
TNS for Linux: Version 11.2.0.3.0 - Production
NLSRTL Version 11.2.0.3.0 - Production
SQL> drop materialized view log on test_tbl;
Materialized view log dropped.
SQL> drop materialized view mv_test_tbl;
Materialized view dropped.
SQL> drop table test_tbl;
Table dropped.
SQL> create table test_tbl(
2 test_id number(10) primary key,
3 test_name varchar2(10) not null)
4 ;
Table created.
SQL> insert into test_tbl values (1,'bob');
1 row created.
SQL> insert into test_tbl values (2,'joe');
1 row created.
SQL> insert into test_tbl values (3,'john');
1 row created.
SQL> commit;
Commit complete.
SQL> create materialized view log on test_tbl
2 with primary key , rowid, sequence
3 (
4 test_name
5 )
6 including new values;
Materialized view log created.
SQL> create materialized view mv_test_tbl
2 refresh fast on commit
3 as
4 select test_id,
5 test_name
6 from test_tbl;
Materialized view created.
SQL> update test_tbl set test_name = 'hello' where test_id = 1000;
0 rows updated.
SQL> commit;
Commit complete.Ok, so that's all good. Now if I create the materialized view log with the COMMIT SCN option:
SQL> drop materialized view log on test_tbl;
Materialized view log dropped.
SQL> drop materialized view mv_test_tbl;
Materialized view dropped.
SQL> create materialized view log on test_tbl
2 with primary key , rowid, sequence
3 (
4 test_name
5 ),
6 commit scn
7 including new values;
Materialized view log created.
SQL> create materialized view mv_test_tbl
2 refresh fast on commit
3 as
4 select test_id,
5 test_name
6 from test_tbl;
Materialized view created.
SQL> update test_tbl set test_name = 'hello' where test_id = 1000;
0 rows updated.
SQL> commit;
commit
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-01006: bind variable does not exist
SQL>Committing an update that updates no rows against a master table for a single table fast refreshable materialized view results in the error above when the materialized view log on the master table is created with the COMMIT SCN option. I'm guessing that this isn't how things are supposed to work. Or am I missing something here? Anyone else encountered this before?
Cheers.
Edited by: Stain on Jan 25, 2013 1:27 PMQuery Rewrite is an option for a Materialized View, not a Materialized View Log. Also, query rewrite is used as an optimization technique which "transforms a SQL statement expressed in terms of tables or views into a statement accessing one or more materialized views that are defined on the detail tables". I don't think it plays any role in the refresh path.
Regardless, it made no difference.
SQL> create materialized view mv_test_tbl
2 refresh fast on commit
3 ENABLE QUERY REWRITE
4 as
5 select test_id,
6 test_name
7 from test_tbl
8 ;
Materialized view created.
SQL> update test_tbl set test_name = 'hello' where test_id = 1000;
0 rows updated.
SQL> commit;
commit
ERROR at line 1:
ORA-12008: error in materialized view refresh path
ORA-01006: bind variable does not exist
SQL>Edited by: Stain on Jan 25, 2013 2:06 PM -
ORA-12008: error in materialized view refresh path in 10g
Hi, all.
The database is on 10gr2.
I am testing materized view refresh.
However, I got the following errors.
exec dbms_refresh.refresh('"STGFAB"."MV_OPTION_TEST_HO1"');
ORA-12008: error in materialized view refresh path
ORA-01008: not all variables bound
ORA-02063: preceding line from L8ZFAB
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2254
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2460
ORA-06512: at "SYS.DBMS_IREFRESH", line 683
ORA-06512: at "SYS.DBMS_REFRESH", line 195
ORA-06512: at line 1
Thanks in advance.
Best Regards.Subject: Materialized View Refresh Fails on Second Attempt With ORA-01008 'Not All Variables Bound' Error
Doc ID: Note:472261.1 Type:
--MM -
ORA-00001 and ORA-06512 error on DBMS_WM.ResolveConflicts
We are getting unique constraint error in Production Database. We are able to merge most of the workspaces with no issues. One workspace is givign errors on merge.
Here is the code
begin
dbms_wm.gotoworkspace('denialletterspoc_onmzpulp');
dbms_wm.setdiffversions('denialletterspoc_onmzpulp','LIVE');
dbms_wm.SetConflictWorkspace('denialletterspoc_onmzpulp');
commit;
DBMS_WM.BeginResolve('denialletterspoc_onmzpulp');
DBMS_WM.ResolveConflicts(
workspace => 'denialletterspoc_onmzpulp',
table_name => 'MCM_MESSAGE',
where_clause => ' id in (8403026,10134822,8259485,8259488,8426289,8426287,10186643,8426288) ',
keep => 'CHILD'
exception when others then
DBMS_WM.RollbackResolve('denialletterspoc_onmzpulp');
raise;
end;
ORA-00001: unique constraint (T2.MCM_MESSAGE_PK) violated
ORA-06512: at line 16
I looked at the date in XXX_lt tables and it does not look suspecious. Please help us understand
ORA-00001 and ORA-06512 error.
Amit GangwarHi, Ben
Our OWM_VERSION is 10.2.0.4.3.
I tried disable and enable constraint MCM_MESSAGE_PK. But didn't fix our issue.
Split where clause from " id in (...) " syntax to " id = ... " syntax will reduce performance heavily. And I did some test that " id in (...) " syntax works well in our dev env.
I opened our trace file and get below plsql block. When I perform it get same error with our original codes. Please notice the part of "forall wm_indx in WM_rowids.first .. WM_rowids.last execute immediate 'begin insert into T2.MCM_MESSAGE_lt ... ...", error occurred here. But if I change the "forall" syntax to normal " for ... loop" syntax then no error here. Can you give me some advice or suggestion?
DECLARE
WM_rowids wmsys.lt_ctx_pkg.rowidTabType;
WM_rowids_vt wmsys.lt_ctx_pkg.rowidTabType;
WM_curver wmsys.lt_ctx_pkg.int_tab;
WM_vtRow wmsys.lt_ctx_pkg.int_tab;
WM_nextver wmsys.lt_ctx_pkg.nextver_tab;
WM_found integer := 0;
BEGIN
dbms_wm.gotoworkspace('denialletterspoc_onmzpulp');
dbms_wm.setdiffversions('denialletterspoc_onmzpulp','LIVE');
dbms_wm.SetConflictWorkspace('denialletterspoc_onmzpulp');
/* update the auxilliary table of snapshots */
/* These are rows in the current version that have already been resolved once */
update T2.MCM_MESSAGE_aux st
set (snapShotChild, snapShotParent, versionParent) =
(select p.WM_childds, p.WM_parentds, p.WM_parentver
from T2.MCM_MESSAGE_pkc p
where p.ID = st.ID),
value = '0',
wm_opcode = 'CC'
where st.versionChild = 614
and (ID) in (select ID
from T2.MCM_MESSAGE_pkc p
where (id in (8403026,
10134822,
8259485,
8259488,
8426289,
8426287,
10186643,
8426288)));
select distinct WM_ridchild bulk collect
into WM_rowids
from T2.MCM_MESSAGE_pkc
where (id in (8403026,
10134822,
8259485,
8259488,
8426289,
8426287,
10186643,
8426288))
and WM_childver != 614;
if (WM_rowids.first is not null) then
WM_found := 1;
forall wm_indx in WM_rowids.first .. WM_rowids.last
update T2.MCM_MESSAGE_lt
set retireTime = wmsys.owm_9ip_pkg.activeTimeForDML,
nextver = wmsys.lt_ctx_pkg.getNextVer(nextver,
614,
version,
'denialletterspoc_onmzpulp',
'CRS_LEAF',
22)
where rowid = WM_rowids(wm_indx)
returning wmsys.lt_ctx_pkg.getCurNextVer bulk collect into WM_nextver;
/* These are the rows that have not yet been resolved after the latest BeginResolve */
forall wm_indx in WM_rowids.first .. WM_rowids.last execute immediate
'begin insert into T2.MCM_MESSAGE_lt(ID,DPS_APPLICATION_ID,TYPE_ID,NAME,PRIVILEGED,CAMPAIGN_ID,TEXT,FILE_NAME,GRAPHIC_WIDTH,GRAPHIC_HEIGHT,DESCRIPTION,ACTIVE,INCLUDE_IN_LIBRARY,MESSAGE_FILTER_ID,OP_USER_ID,OP_WORKSPACE,OP_TIME,version,createtime,retiretime,nextver,delstatus,ltlock)
(select t1.ID,t1.DPS_APPLICATION_ID,t1.TYPE_ID,t1.NAME,t1.PRIVILEGED,t1.CAMPAIGN_ID,t1.TEXT,t1.FILE_NAME,t1.GRAPHIC_WIDTH,t1.GRAPHIC_HEIGHT,t1.DESCRIPTION,t1.ACTIVE,t1.INCLUDE_IN_LIBRARY,t1.MESSAGE_FILTER_ID,t1.OP_USER_ID,t1.OP_WORKSPACE,t1.OP_TIME,614, wmsys.owm_9ip_pkg.activeTimeForDML, null,:1, sign(delstatus)*(abs(delstatus)+1),
wmsys.lt_ctx_pkg.checkngetlock(''C'', t1.ltlock, t1.nextver, ''denialletterspoc_onmzpulp'', 0,
''MODIFY'', t1.version, t1.delstatus, 0, 1)
from T2.MCM_MESSAGE_lt t1
where t1.rowid = :2); end;'
using WM_nextver(wm_indx),
WM_rowids(wm_indx)
end if;
if (WM_found = 1) then
wmsys.lt_ctx_pkg.update_modified_tables('T2',
'MCM_MESSAGE',
614,
'denialletterspoc_onmzpulp',
22);
end if;
if (WM_found = 1) then
forall wm_indx in WM_rowids.first .. WM_rowids.last
delete from T2.MCM_MESSAGE_aux
where (ID) in (select ID
from T2.MCM_MESSAGE_lt
where rowid = WM_rowids(wm_indx))
and childState = 'denialletterspoc_onmzpulp';
end if;
/* now insert new syncing information about these rows */
execute immediate 'insert into T2.MCM_MESSAGE_aux (
select ID,
p.WM_childstate, p.WM_parentstate,
p.WM_childds, 614, p.WM_parentds, p.WM_parentver, ''0'',''CC''
from T2.MCM_MESSAGE_pkc p
where ( id in (8403026,10134822,8259485,8259488,8426289,8426287,10186643,8426288) ) )';
END;
Thanks
Amos -
Ora - 01110 and ora 01157 error
Hi,
I am using linux 9i and solaris 5.8 .while i am connecting to the database it shows the ora - 01110 and ora 01157 error.i moved the temp datafile to some location after that only i receiced that error.then i moved the temp file to the particular location.after that what i can to do to resolve the error.
plz in detail sql query.
Thanks
gobi.Can you detail how you are moving the file? Are you using one of the following methods:
With the database down
move/rename the file with OS commands
mount the database and issue the following
alter database rename file '<original path and file name>' to '<new path and file name>';
Open the database
or
With the database open take the tablespace the contains the files to be moved/rename offline.
move/rename the files with OS commands.
alter tablespace <tablespace name> rename datafile '<original path and file name>' to '<new path and file name>';
Bring the tablespace back online. -
Ora-00604 error and ora 01000 error while report generation.
hi all,
I am trying to generate the multiple reports of same template through a program.
While this job is running, i get the following error at the BIP console and the reports don't get generated.
[101711_044115578][][EXCEPTION] java.sql.SQLException: ORA-00604: error occurred
at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-00604: error occurred at recursive SQL level 1
ORA-01000: maximum open cursors exceeded
ORA-01000: maximum open cursors exceeded
Kindly help.
Thanks.Lots of resources with a simple search to see what this is about, for example:
http://www.orafaq.com/wiki/ORA-01000
ORA-01000: maximum open cursors exceeded
Cause: A host language program attempted to open too many cursors. The initialization parameter OPEN_CURSORS determines the maximum number of cursors per user.
Action: Modify the program to use fewer cursors. If this error occurs often, shut down Oracle, increase the value of OPEN_CURSORS, and then restart Oracle.
open_cursors parameter
http://download.oracle.com/docs/cd/E11882_01/server.112/e25513/initparams160.htm#REFRN10137
Oracle support note:
OERR: ORA-1000 maximum open cursors exceeded (Doc ID 18591.1) -
A question about PreparedStatement and ORA-03115 error
Dear all,
I have an issue with JDBC and I would appreciate if you could kindly give me a hand.
I'm using:
- Oracle Database 11g Enterprise (Release 11.1.0.6.0)
- JDBC thin driver version: ( 11.1.0.7.0-Production)
- JDK 1.6
- Operating system: Linux (Ubuntu 8.10)
Here is my code
import java.sql.*;
public class Main
public static void main(String[] args)
String dbURL = "jdbc:oracle:thin:@localhost:1521:mydatabase";
String username = "scott";
String user_password = "tiger";
try
Connection connection = DriverManager.getConnection(dbURL, username, user_password);
String query_text = "SELECT * FROM mytable";
Statement statement = connection.createStatement();
ResultSet query_result = statement.executeQuery(query_text);
connection.close();
catch (SQLException e)
for (Throwable t: e)
t.printStackTrace();
}This works pretty well without any problem. But when I want to use PreparedStatement instead of Statement I receive the ORA-03115 error message, that is, when I replace the Statement with PreparedStatement in the following way:
String query_text =
"SELECT first_name, ?, id, ?, job_title, salary FROM mytable "+
"WHERE id IN ('id14', ?, 'id17', 'id18')";
PreparedStatement prepared_statement = connection.preparedStatement(query_text);
prepared_statement.setString(1, "last_name");
prepared_statement.setString(2, "birthday");
prepared_statement.setString(3, "id02");
ResultSet query_result = prepared_statement.executeQuery(query_text);I get the following:
java.sql.SQLException: ORA-03115: unsupported network datatype or representation
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:133)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:206)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1034)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:194)
at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:791)
at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:866)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1377)
at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:387)
at mysqlpackage.Main.main(Main.java:33)Therefore, right after
ResultSet query_result = prepared_statement.executeQuery(query_text);the exception is thrown,
why it works with Statement but not with PreparedStatement? I tested with several other queries, insert a new row, delete a row, everytime it works well, but when I want to use PreparedStatement instead of Statement, again I have this error message.
Any idea?
Thanks in advance,OK, I found myself the answer.
First error, I had use ? also for column names, which is not accepted as the SQL query has to be precompiled.
Second error: Instead of writing
ResultSet query_result = prepared_statement.executeQuery(query_text);I had to write:
ResultSet query_result = prepared_statement.executeQuery();I tested with the following
String query_text =
"SELECT first_name, last_name, id, birthday, job_title, salary "+
"FROM myenterprise "+
"WHERE id IN (?, ?, ?, ?) ";
PreparedStatement prepared_statement =
connection.prepareStatement(query_text);
prepared_statement.setString(1, "id02");
prepared_statement.setString(2, "id04");
prepared_statement.setString(3, "id08");
prepared_statement.setString(4, "id09");
ResultSet query_result = prepared_statement.executeQuery();And it works pretty well now! :) -
Ora 600 and ora 7445 error in oracle 10g r2
hi all,
we are using Oracle 10g r2.
os is windows 2003 server,
ram is 4 gb.
front end is java .
we got a below mentioned errors.
i got the RA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], [],
and ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
and Error 0 in kwqmnpartition(), aborting txn errors.
for aug 3 11.42.47 we got a ora 600 error after that through front end (java) users can't able to connect the database.the not able to executed the query session disconnected error.
what is reason for theis error . how it will rectifiy.?
pls advice.Below i attached the alret log message .
Sun Aug 02 04:04:24 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:48:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 05:49:10 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:38:49 2009
Thread 1 advanced to log sequence 1732
Current log# 3 seq# 1732 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Sun Aug 02 07:44:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 07:45:14 2009
Error 0 in kwqmnpartition(), aborting txn
Sun Aug 02 22:00:26 2009
Thread 1 advanced to log sequence 1733
Current log# 1 seq# 1733 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO01.LOG
Mon Aug 03 07:08:15 2009
Thread 1 advanced to log sequence 1734
Current log# 2 seq# 1734 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO02.LOG
Mon Aug 03 09:28:23 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 09:30:27 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 11:42:47 2009
Errors in file e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc:
ORA-00600: internal error code, arguments: [qerghFetch:inc], [], [], [], [], [], [], []
Mon Aug 03 13:20:00 2009
Thread 1 advanced to log sequence 1735
Current log# 3 seq# 1735 mem# 0: E:\ORACLE\PRODUCT\10.2.0\ORADATA\ORCL\REDO03.LOG
Mon Aug 03 16:07:07 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x61F04AC9] [ADDR:0xC] [UNABLE_TO_READ] []
Mon Aug 03 16:07:11 2009
Process m000 died, see its trace file
Mon Aug 03 16:07:11 2009
ksvcreate: Process(m000) creation failed
Mon Aug 03 16:08:37 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 16:10:40 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:25:05 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:27:11 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:32:19 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 17:33:24 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:52:08 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 18:54:09 2009
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:05:33 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Mon Aug 03 19:09:02 2009
Errors in file e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_5132.trc:
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [unable_to_trans_pc] [PC:0x7C34126B] [ADDR:0x0] [UNABLE_TO_WRITE] []
Mon Aug 03 19:10:27 2009
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txn
Error 0 in kwqmnpartition(), aborting txnHi reshumakur
As this is your PRODUCTION system THEN_ The best help to offer in case of ORA-600, and ORA-7445 is to open SR with metalink. Submit with the SR the following
1- Alert log
2- Trace files (in ur case e:\oracle\product\10.2.0\admin\orcl\udump\orcl_ora_6012.trc: and e:\oracle\product\10.2.0\em_2\rdbms\trace\orcl_ora_4756.trc:)
3- Describe what was happening when you had these errors.
Try to avoid free help when you have ORA-600 and ORA-07445. This errors could be becuase of BUGS. Oracle Support will know this from the call stack in the trace file.
Then Do your best to patch 10.2.0.4 and the latest CPU patch.
Good Luck -
ORA-01157 and ORA-01110 errors
Dear all,
I was getting "ORA-00205: error in identifying controlfile" error while starting the database
This had happened during the investigation of the IMPORT_ABAP phase failure, during our system copy (Import)
I found out in alert_SID.log that control file was missing in 3 locations /oracle/SID/origlogA, /oracle/SID/origlogB and /oracle/SID/sapdata1
So I copied the control file from /oracle/GRD/saparch/cntrl to the above 3 locations. Now I am able to mount the database but not able to open it.
Getting the below mentioned error
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: '/oracle/SRD/sapdata1/system_1/system.data1'
Any suggestions?The control file from /oracle/SRD/saparch/cntrl was an old file so deleted it from the 3 locations as mentioned earlier
Now there is no control file in origlogA, origlobB and sadata1
Now I am getting the below mentioned error
ORA-00205: error in identifying control file, check alert log for more in
any suggestions?
Maybe you are looking for
-
How do I download my Music and Movies from my Apple TV to my MacBook
How do I download my Music and Movies from my Apple TV to my MacBook
-
I am running version 10.8.3 on mountain lion, and I'm sure it has something to do with bathe network settings, but have no idea how to fix it.... Everything has been set on automatic, but now doesn't seem to work. I'm confused.... iPad, iPhone, works
-
Display broken - set external display as default
my powerbook g4 screen is kaput. the computer is working fine otherwise and detects the external display i plugged in, but i'm not sure how to set the external display to be the primary display without being able to see the 'system preferences' menu
-
My computer shows that I have both a Drive E for CDs and a Drive F for the USB but I cannot figure out how to change the destination when I try to burn to the USB instead of the CD. Does anyone have an answer? Thanks, ClintsMomma This question was s
-
Hi, I believe I set the JAVA_HOME and path variable correct, but when I type command line command "javac" and "javadoc", they are not recognized. But the command "java" is recognized. Anybody would let me know how to sort it out? Thanks