Mvt 541 with MB1B and ME2O.

Hi,
I don't understand the difference between the above 2 trxs MB1B and ME2O and why
in ME2O there are two buttons ("Post goods issues" and "Create delivery").
Best regards

Hi,
MB1B transaction code is mainly intended for transfer postings from one storage location to another.
ME20 specially designed to process a subcontracing goods issue.
In MB1B we have to input the mvt type as 541 to supply a goods to a subcontracing vendor whereas in a ME2O transaction, system defaults the movement type as 541 which easens the task of remebering the mvt type while doing a subcontracing goods issue.
Post goods issue - Directly transfers the stock to Material provided to vendor.
Whereas Delivery option can be used if you want to process the material issue through a delivery process ie thorugh SD route. In short, PGI will be used when it follows MM route, whereas delivery option will be used when it is to be processed through the SD route.
Regards,
RitiG

Similar Messages

  • Difference between Mb1b 541 Mov type and ME2O

    Hi,
    I want to know difference between Mb1b 541 Mov type and ME2O.
    Thanks and regards
    Gitesh

    Hi,
    ME20 has 2 options one to directly transfer, that is without delivery.  And, anotehr is with delivery.
    Option 1 will create a material document in ME20 transaction.
    With option 2 it will create a delivery note.   you have issue the material in vl02n if delivery note is created and then material documetn will get generated.
    regards
    alexandro.

  • MB1B and mvt 541 with reference to a PO.

    Hi,
    I created a PO for subcontracting when I send
    the goods to vendor with trx MB1B and mvt type 541
    if I perform again the process system allow with the same
    PO sending goods to vendor.
    The process can be repeated without end
    How can I solve the problem?
    Best regards

    Hi
    In MB1B, If you issue material to SC Vendor useing 541 movement type....you are not referring the Sub-Contracting PO....that is why the system doesnot understand how much qty. you have to send to SC Vendor...
    For this purpose only you have to use ME2O transaction.....here you can issue according to the SC-PO requirement...After completion of the work if the Sc Vendor needs more material....then you have to do subsequent adjustment and issue the needed material in MB1B useing 541 movement type,.
    Reward if useful
    Regards
    S.Baskaran

  • MB1B or ME2O for issuing components to Sub Con Vendor

    Hi friends,
    I am configuring Subcontracting process.
    I have one doubt..
    In the process, after creating PO --> which method we generally adopt while issuing components to Subcon Vendor (Global Practice)
    Mvt Type 541 in MB1B OR ME2O ???
    What is the merit of these two methods??
    Could you please throw some light on it...
    Regards,
    Jackie

    Hi Experts,
    Thanks for your prompt reply & clarifying my doubt.
    I am able to create Subcon PO & issue components to vendor, Receive FG from Subcon Vendor & then settle Invoice for Assembly charges.
    But i am unable to issue componenst using ME2O.
    My shipping point is not picked up automatically.
    I followed all the config steps mentioned in this forum.
    Do we have to issue components using Delivery in ME2O?
    Regards,
    Jackie

  • Link for MSEG and EBELN for Mvt 541.

    HI,
    Actually I need link to get the mataerial document numbers against Sub contract Po for mvt 541.
    I need to develop a program to capture the material document nos against Subcontract PO and calucate reamain components against each po with respect to GR for that PO and line item.
    Please provide link for MSEG and EBELN link for mvt 541.
    Thanks
    Venkat

    Hi Venkat,
    Check EKBE table. U will find Material doc no corresponding to the PO no.
    Reagrds,
    Amitava

  • Quality Inspection with Parts Provided to Vendor - Mvt 541

    Hai All,
    The scenario, Material stock is available in Quality Inspection stock. For final operation this has to be sent outside to a Subcontractor.
    With Mvt type 541 in MB1B, unable to create the transfer document with Inspection stock for that material. Mvt 541 doesn't recognize the Quality Inspection stock of Material.
    I created new movement type by copying mvt 541 in OMJJ. But unable to enter "Inspection Lot Origin" value (OMJJ - New movement type --> Update control / WM movement types --> select line & goto Details) which will trigger Insp. lot creation during material movement.
    Kindly help me.
    Regards,
    Jags

    Hi,
    Can you explain the business need to do something like that? Because the logic is once the stock is in QC it has to be cleared for you or your sub-con vendor to use it. i am sure you would not want to use sub-standard parts either inhouse or by your sub-con for your products.
    So clear the inspection lot first & then once in unrestricted then issue the material to sub-con.
    Await your inputs.
    Regards,
    Vivek

  • MIGO instead of MB1B ..for MVT 541

    Dear all;
    Can anyone tell me how to activate migo-transfer posting-to purchase order with movement type 541 (transfer components to subcontractor) Instead of using MB1B,that's because the release strategy doesn't appear in MB1B.
    Please note that my customer doesn't support EHP4.

    Dear All;
    Thanks for your reply, but my customer use subcontract po with item category L with release strategy to issue the components to subcontractor.
    when I post components with movement type MB1B the components are posted without restricting release of PO.
    Please note that this issue is solved in EHP4 that's you can post components with MIGO-Transfer posting-PO.
    The issue that MB1B doesn't restrict release strategy .
    Is any solution to restrict posting with MB1B when the subcontract po is not released or activate any function module to acticate migo-transfer posting-Po to old version?

  • MIGO mvt 541.

    Hi,
    how performing mvt type 541 with MIGO?
    Best regards

    Hi ,
    Sorry for Interruption after closing the Post also.
    This is just for Information
    We can do the 541 mvt type Transfer Postings through MIGO also.
    You have to select the Transfer postings option and select the Others and change the mvt type in where tab to 541 then system will ask for Material, qty, Plant, Vendor, and Str location.
    Check and confirm on the same.
    rgds
    Chidanand

  • Issue in bringing up CRS on ATG 10.1.1 with MySQL and Weblogic 10.3

    Hello,
    I am trying to bring up Commerce Reference Store as part of my evaluation using MySQL (bundled with ATG) and WebLogic 10.3.
    I followed the ATG Documentation on CRS with WebLogic and MySQL and I could not proceed because of the below error log. I keep getting error in OnlineCreateServerInstanceTask of CIM. I believe it should be some configuration problem, but could not think of any.
    As part of the installation, I use C:\jdk1.6.0_25. I verified my weblogic server is up through the admin console. I started MySQL before running the eval batch. Apart from starting MySQL server, I did not make any datasource/database configuration changes for ATG. I have not run any other scripts to configure MySQL too.
    Please guide me to resolve the problem.
    C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval>configureEval.bat
    Do you wish to run the CRS evaluation installation? [Y/N]: y
    Do you wish to use an existing database for the CRS evaluation? [Y/N]: n
    The CRS evaluation install will attempt to create the database. Press [Return] t
    o continue or any other key to quit:
    Enter mysql database connection details
    Enter user name: admin
    Enter user password: admin
    Enter database name: crsprod
    Enter 'root' user password:
    Creating database...
    Finished database creation
    Enter weblogic admin server URL: http://localhost:7001
    Enter weblogic admin server username: weblogic
    Enter weblogic admin server password: weblogic123
    Buildfile: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\evalbuild.xml
    all:
    [copy] Copying 1 file to C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval
    [delete] Deleting: C:\ATG\ATG10.1.1\CommerceReferenceStore\Store\eval\cimOut.
    cim.tmp
    BUILD SUCCESSFUL
    Total time: 0 seconds
    Application Server: weblogic
    The following installed ATG components are being used to launch:
    ATGPlatform version 10.1.1 installed at C:\ATG\ATG10.1.1
    Created "C:\ATG\ATG10.1.1\home\CIM\startDynamo.jar" in 15,273ms.
    Nucleus running
    atg.cim.productconfig.productselector.ProductSelectionContextTask starting...
    (Searching for products... done.)
    atg.cim.productconfig.productselector.ProductSelectionContextTask finished.
    atg.cim.productconfig.appserver.AppServerSelectTask starting...
    atg.cim.productconfig.appserver.AppServerSelectTask finished.
    atg.cim.productconfig.appserver.AppServerPathTask starting...
    atg.cim.productconfig.appserver.AppServerPathTask finished.
    atg.cim.productconfig.appserver.DomainPathTask starting...
    atg.cim.productconfig.appserver.DomainPathTask finished.
    atg.cim.productconfig.appserver.UrlTask starting...
    atg.cim.productconfig.appserver.UrlTask finished.
    atg.cim.productconfig.appserver.UsernameTask starting...
    atg.cim.productconfig.appserver.UsernameTask finished.
    atg.cim.productconfig.appserver.PasswordTask starting...
    atg.cim.productconfig.appserver.PasswordTask finished.
    atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask starting...
    atg.cim.productconfig.appserver.AppServerSelectionPersistenceTask finished.
    atg.cim.database.CreateSchemaTask starting...
    atg.cim.database.CreateSchemaTask finished.
    atg.cim.database.ImportDataTask starting...
    Combining template tasks...Success
    Importing (1 of 1) /CIM/tmp/import/nonswitchingCore-import1.xml:
    /CommerceReferenceStore/Store/Storefront/data/pricelists.xml to /atg/commerce/pr
    icing/priceLists/PriceLists
    /CommerceReferenceStore/Store/Storefront/data/stores.xml to /atg/store/stores/St
    oreRepository
    /CommerceReferenceStore/Store/Storefront/data/catalog-i18n.xml to /atg/commerce/
    catalog/ProductCatalog
    /CommerceReferenceStore/Store/Storefront/data/pricelists-i18n.xml to /atg/commer
    ce/pricing/priceLists/PriceLists
    /CommerceReferenceStore/Store/Storefront/data/sites.xml to /atg/multisite/SiteRe
    pository
    /CommerceReferenceStore/Store/Storefront/data/sites-i18n.xml to /atg/multisite/S
    iteRepository
    /CommerceReferenceStore/Store/Storefront/data/promos-i18n.xml to /atg/commerce/c
    atalog/ProductCatalog
    /CommerceReferenceStore/Store/Storefront/data/seotags-i18n.xml to /atg/seo/SEORe
    pository
    /CommerceReferenceStore/Store/Storefront/data/wishlists.xml to /atg/commerce/gif
    ts/Giftlists
    /CommerceReferenceStore/Store/Storefront/data/inventory.xml to /atg/commerce/inv
    entory/InventoryRepository
    /CommerceReferenceStore/Store/Storefront/data/users.xml to /atg/userprofiling/Pr
    ofileAdapterRepository
    /CommerceReferenceStore/Store/Storefront/data/orders.xml to /atg/commerce/order/
    OrderRepository
    /CommerceReferenceStore/Store/Storefront/data/orders-i18n.xml to /atg/commerce/o
    rder/OrderRepository
    /CommerceReferenceStore/Store/Storefront/data/storetext-i18n.xml to /atg/store/s
    tores/StoreRepository
    /CommerceReferenceStore/Store/Storefront/data/claimable-i18n.xml to /atg/commerc
    e/claimable/ClaimableRepository
    ... > Success
    All Imports Completed Successfully
    atg.cim.database.ImportDataTask finished.
    atg.cim.worker.common.PropertyFileClearPersistanceTask starting...
    atg.cim.worker.common.PropertyFileClearPersistanceTask finished.
    atg.cim.productconfig.serverinstance.ServerInstanceNameTask starting...
    atg.cim.productconfig.serverinstance.ServerInstanceNameTask finished.
    atg.cim.productconfig.serverinstance.PortBindingsSelectTask starting...
    atg.cim.productconfig.serverinstance.PortBindingsSelectTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.worker.common.MapPropertyFileCreatorTask starting...
    atg.cim.worker.common.MapPropertyFileCreatorTask finished.
    atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask starting.
    atg.cim.productconfig.serverinstance.MakeServerInstanceFromPatternTask finished.
    atg.cim.productconfig.appassembly.EarFileNameTask starting...
    atg.cim.productconfig.appassembly.EarFileNameTask finished.
    atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask starting...
    Error Executing Batch File
    atg.cim.worker.TaskException: Error deploying to weblogic
    atg.cim.worker.TaskException: Error exececuting batch file
    at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
    130)
    at atg.cim.Launcher.startCimFlow(Launcher.java:278)
    at atg.cim.Launcher.main(Launcher.java:99)
    Caused by: atg.cim.worker.TaskException: Error deploying to weblogic
    at atg.cim.worker.Task.handleException(Task.java:72)
    at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
    execute(OnlineCreateServerInstanceTask.java:159)
    at atg.cim.headless.HeadlessExecutorImpl.executeTasks(HeadlessExecutorIm
    pl.java:150)
    at atg.cim.headless.HeadlessExecutorImpl.populateAndExecuteHeadlessTasks
    (HeadlessExecutorImpl.java:140)
    at atg.cim.batch.BatchChooserExecutor.populateAndExecuteHeadlessTasks(Ba
    tchChooserExecutor.java:169)
    at atg.cim.flow.CimFlow.headlessFlow(CimFlow.java:116)
    at atg.cim.flow.CimFlowCreator.startHeadlessCimFlow(CimFlowCreator.java:
    120)
    ... 2 more
    Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:348: The following
    error occurred while executing this line:
    C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following error occur
    red while executing this line:
    C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
    at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
    tHelper.java:541)
    at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
    a:394)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
    a:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.Target.execute(Target.java:357)
    at org.apache.tools.ant.Target.performTasks(Target.java:385)
    at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
    at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
    at atg.cim.task.ant.utility.AntExecutionWrapper.executeAntTarget(AntExec
    utionWrapper.java:167)
    at atg.cim.worker.AntTask.executeAntTarget(AntTask.java:115)
    at atg.cim.productconfig.deploy.weblogic.OnlineCreateServerInstanceTask.
    execute(OnlineCreateServerInstanceTask.java:155)
    ... 7 more
    Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:254: The following
    error occurred while executing this line:
    C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned: 1
    at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
    tHelper.java:541)
    at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
    a:394)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
    a:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
    a:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
    a:391)
    ... 20 more
    Caused by: C:\ATG\ATG10.1.1\CIM\plugins\Base\ant\cim-ant.xml:214: exec returned:
    1
    at org.apache.tools.ant.taskdefs.ExecTask.runExecute(ExecTask.java:636)
    at org.apache.tools.ant.taskdefs.ExecTask.runExec(ExecTask.java:662)
    at org.apache.tools.ant.taskdefs.ExecTask.execute(ExecTask.java:487)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
    a:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
    at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
    at sun.reflect.GeneratedMethodAccessor132.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.jav
    a:105)
    at org.apache.tools.ant.Task.perform(Task.java:348)
    at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.jav
    a:391)
    ... 34 more
    Nucleus shutting down
    Nucleus shutdown complete
    Thanks.

    This error is resolved after following the logs in C:\ATG\ATG10.1.1\CIM\log\cim.log. The root cause is I used http as protocol instead of t3 while specifying weblogic admin url.
    http://localhost:7001 instead of t3://localhost:7001
    Thanks.

  • Can I add text on the GR/GI Slip while performing MvT 313 in MB1B ?

    Hi
    When i use movement type 313 in Tcode MB1B, with Print and Collective Slip marked, is it
    possible to add a text that comes visible on the GR/GI Slip ? The text is suppose to be
    as an additional note to the other information on the slip.
    I think i have tried to enter text in a couple of fields in MB1B but have never seen any of
    this text on the printed Slip.

    http://help.sap.com/saphelp_nw70/helpdata/en/d6/0db303494511d182b70000e829fbfe/frameset.htm

  • Integration with MM and SD

    Hi experts,
    tell how to integrate with MM and SD module as t.code i know obyc.but i know how its really work in real time  , where GL is assign and what type of GL have to make.its asked in interview , tell me abt valuation class .
    thnaks,
    arti singh

    MM-FI integration will be done in T.Code OBYC.  SD-FI integration will be done in VKOA.
    OBYC - GL accounts has to be assigned based on the valuation class as detailed combination:
    Transaction                   Valuation Class                  G/L Account for
    BSX                         as per Material master        INVENTORY POSTING
    WRX                                                                  GR/IR CLG
    GBB-VBO/VBR/VKA                                                  CONSUMPTION
    GBB-VAX/VAY                                                  COGS
    GBB-AUA/AUF                                                  ORDER SETTLEMENT
    AUM                                                                  ST.TRANSFER
    FRL                                                                  SUB. CONTRACT CHARGES
    PRD                                                                  PRICE DIFF
    GBB-INV                                                                  PHY. INV
    UMB                                                                  INV. REVAL
    GBB-VNG                                                                  SCRAPPING
    BSV                                                                 CHANGE IN STOCK
    ZOB                                                                 501 MVT. GR WO PUR. ORD
    ZOF                                                                 521 MVT. GR WO PRDN ORD
    BSR

  • Output for MB1A , MB1B and  MB1C

    Hi Experts ,
    My client needs Output (Prinout) for MB1A , MB1B and  MB1C , I would appriciate if anybody could  guide me through correct procedure to set up .
    Thanks in advance

    Hi Greetings
    Please find the following steps
    1) Creation of Message out put type with application ME. You can use standard access sequence 0001
    SPRO --> MM --> Inventory Management and Physical Inventory --> Output Determination --> Output Determination
    2) Assigning the output type to Output Determination Procedures
    SPRO --> MM --> Inventory Management and Physical Inventory --> Output Determination --> Maintain Output Determination Procedures
    3) Maintaining Condition in Transaction MN21
    5) User setting.
    Transaction SU3 --> Parameters --> Parameter ID "NDR" --> Parameter value 'X'
    Gobinathan G

  • Is there a way to create a year at a glance with detail and print?

    Is there a way to create a year at a glance with detail and print?

    To do what Dave indicated you need to do, it depends on what version of Acrobat you have:
    Acrobat 8: Advanced > Enable Usage Rights in Adobe Reader
    Acrobat 9: Advanced > Extend Features in Adobe Reader
    Acrobat 10: File > Save As > Reader Extended PDF > Enable Additional Features
    Acrobat 11: File > Save as Other > Reader Extended PDF > Enable More Tools (includes form fill-in & save)
    I wonder what it will be next time?

  • I've just found that three movies I've bought from iTunes on on my iPad are not showing up on Apple TV or anywhere other than that iPad.  What's up with that and will I lose these films if I reset this iPad?

    I've just found that three movies I've bought from iTunes on on my iPad are not showing up on Apple TV or anywhere other than that iPad.  What's up with that and will I lose these films if I reset this iPad?

    Thanks.  The reason this has become an issue is that I recently bought a new Macbook Air that the iPad is not synced to.  The one is was synced to was stolen.  If I want to sync this iPad to the new Air, won't it be wiped before I'm able to copy these films or am I wrong about that?

  • Problem with xfce and/or mouse and keyboard

    Hi!
    Two days ago I've turned on my laptop with Arch and the display manager Slim has frozen immediately. Later on Single-User mode I've uninstalled it. Now in normal mode when I type "startxfce4" everything is showing up, but the mouse and keyboard don't work. I know it's not frozen, because animation of mouse and CPU Frequency Monitor is on.
    Strange fact is that laptop is not connecting with the Internet, so now I don't know where the problem is.
    It's happening when I start xfce both from user and super user.
    Just before those troubles I've updated everything with "pacman -Syu", but I haven't seen anything strange. Also the computer could have been roughly turned off (by unplugging power supply), when was turning on.
    Thanks,
    Gaba

    Sorry for not replying, but I didn't have access to my laptop by this time.
    On grub I have only normal mode and 'fallback' mode, so I have result from 'journalctl' from normal mode.
    I'm sending the fragment of this file where you can see everything after I typed 'startxfce4' in console:
    http://codepad.org/8pYIj8qC
    I see that something is wrong, but after some attempts I don't know how to fix this ^^
    Edit:
    Oh, I forgot to write, that I've tried activate some drivers from 'lspci -k' (there were no "Kernel driver in use:..." in almost every device), but it didn't fi anything.
    Last edited by gargoyle (2015-03-15 23:20:18)

Maybe you are looking for

  • What is difference between 2 characters Glyphs?

    Sample data : Dropbox - test.indd If I copy content of TextFrame to Excel or Notepad, only first character can display. Why? What is difference between 2 characters Glyphs? How can set Character 2 can display the same character 1  if copy to Excel or

  • How can I reduce the file size in Adobe Reader 9?

    My wordpress isn't allowing me to upload files larger than 2MB. How do I resize my PDF in Adobe Reader 9 so that it is <2MB? Thank you very much for the help!

  • How to create j2me project using jump developer desktop

    Hi, iam not understanding how to launch sun emulator when i execute my j2me project in jump developer desktop, and it asks for the main() function to execute, and i write main() the control stops in main() and the control doesn`t go to startApp()....

  • Oracle 8i Enterprise Edition 8.1.6 not installing on Pentium-IV Mahcine

    We have Legal version of Oracle 8i Enterprise Edition 8.1.6 & we are trying to install the same on Pentium-IV Mahcine with Specification M/B ODSSY 82845, CPU - 1.4 GHZ, 128 MB RAM, 40 GB HDD. But it not installing and also not showing any error. Plea

  • J2ee setenv.sh doesn't work in Solaris8

    Dear all, I tried to use the /j2sdkee1.3.1/bin/setenv.sh to setup the env, especially the J2EE_HOME, but it failed to do so. My OS is Solaris8. I ran the script under /bin/csh. I found that the setenv.sh is actually wrote in BournShell. I added the f