Mvt type 311 posting - automatic dummy printout needs to be disabled

Hello Friends,
We have a custom program to post transfer postings. whenever 311 type GR documents are created , a dummpy printout occurs in the printer ( printer configures in user's profile ) .
I am not able to find the corresponding form associated with this. also , I need to deactivate this.
Please guide with some clues.
I tried searching the posts , Many are similar to my problem - but none of them solved my issue.
thanks
Raghu V

Hello Ramakrishna,
thanks for your inputs.
i have checked OMB5  - option 1 is marked for 311 movt. type .  i guess removing this might stop trigerring the printout for all 311 movt. types .
but my question here is how to find which form is getting triggered ? because it contain junnk data and emptyr values in the printout.
also , In transaction : OMLV , i see that print code assigned is 02 for movt. type 311. whats the significance  of this ?
many thanks,
Raghu V

Similar Messages

  • Automatic creation of Batch using mvt type 311

    when i am trying to transfer material from one storage location to another using mvt type 311. the system is not creating the batch automaticcally.
    I have already maintained allthe basic configuration required for this.even in IMg ->logistic general->batch management---->creation of new batch in this path also for mvt type 311 i mainatined (automatical/manual without check)batch creation.but still the system is not generating the new batch.
    Can anybody help in this issue.
    Thanks in advance

    Hi,
    When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
    You need to use following user exit at batch creation
    EXIT_SAPLV01Z_001
    EXIT_SAPLV01Z_002
    Hope this helps, reward if useful,
    Best Regards VS

  • Mvt type 311

    Dear All,
    I have transfer material sloc to sloc using mvt type 311, our requirement is to control the mvt type.
    can i assign release strategy to this time.
    Thanks
    Shital

    There is no provision to assign Release Strategy to material Doc. However this can be restricted at Authorisation level for T code MB1B / MIGO_TR.
    Regards
    Bhavesh Mistry

  • Issue with Mvt type 311

    Hi friends,
    I have a issue with stock transfer from one storage location to another with transaction MB1B using movement type 311.
    When ever we transfer stock for a material, it transfers from unrestricted to quality restricted stock. eg. if a trasfer from 0001 sloc to 0002 sloc, then it will transfer 0001 unrestricted to 0002 quality inspection.
    Can plese some one tell me where these settings are maintained?
    Thanks,
    Rohit

    Hello,
    This is not the SAP Standard Practice,
    While transfer of material from one storage location another stoarge location thorugh 311 movement type, the stock type should be same in both the storage locations.
    you can directly transfer from Unrestricted  0001 storage location to 0002 Storage location (quality inspection), before that you should match both stock type , through respective movement type 321 or 322.
    then you can transfer one storage location to another (stock type should be same)
    Regards
    Mahesh Naik.

  • Inspection lot for Mvt type 311 between two storage location only

    Hello all,
    I want to create an inspection lot only whenever my material transfer between two particulars storage locations. e.g if i have multiple storage locations, then i need an inspection lot to be created whenever my material transferred from say X S.Loc to Y S.loc only. For other transfers i don't need to create an inspection lot even from Y to X.
    For more clarity, suppose i have ten storage locations. i have also created one storage location for my Lab. So I want an inspection lot to be created only when my material transfer to my Lab storage location from any other storage location, not when i transfer from my LAB to any other S.Loc or between two S.Loc other than LAB.
    I have activated inspection type 08 but it does not have a restricition on S.Loc.
    So please suggest some solution for the same.

    Dear Amit
    In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
    So whenever you want inspection lot to be created use Z11.
    You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
    Regards
    Gajesh

  • Movement type 311- get value against a material

    Hi All,
    I can get a report of stock value and qty against a material from MCBE report.
    But for movement type 311,I am getting only the stock qunatity but not value.
    Will there be associated value for this movement type.
    Is there any other way where I can see associated value.Please suggest.
    Thanks in advance.

    Hi,
    Mvt type 311 is the transfer between storage location to location in the same plant. Only quantity will be updated and no value will be updated because the valuation area in the same plant.
    Here only material document will be generated and no accounting document.
    You can see the stock report in t code  MB52 locationwise stock with value.
    Regards
    Ram
    Edited by: ramachandran subramanian on Apr 6, 2009 10:02 AM

  • IM Mvt Type Reversal - any info on Function Codes?

    Hi, can anyone point me in the direction of some documentation that explains the usage of function codes in IM Movement Type Reversal customization? Thanks in advance.

    OK, when you customise a Movment Type in Inventory Management and Physical Inventory the Mvt Type has a number of linked movements for reversals i.e. a reversal of a 101 is a 102 for function Code ST and 101 for Function Code SN: -
    Mvt     FCode     Description          Mvt     Type of Posting
    101     RL     Return Delivery     122     1
    101     SN                                   101
    101     SS     Reversal (Detail)     102     2
    101     SSR     Return Del. (Detail)     122     1
    101     ST     Reversal          102     2
    101     WERE     Returns Item          161
    I cannot find any help with regards to what the useage is for the different function codes as seen in the table above......can anyone help?

  • Goods Issue not possible with ref to Reservation using 201 mvt type when reservation created by 311 movement type

    HI MM Folks,
    My requirement is reservation should be created with 311 movt type. When we do good issue with 201 movt type with reference to reservation
    system is throwing an error "Goods movement not possible with mvmt type 311". Due to MRP run we should create a reservation using 311 movement type but not 201 mvt type, (If we create a reservation 201 movt type, during MRP run automatically reservation quantity also taking into consideration, to avoid this we will be creating reservation as 311 movt type). Is there any enhancement to available to reach the requirement. If it is possible give me guidelines.
    your help will be highly appreciable.
    Regards
    Vinay

    Dear,
    Movement type 311 is for doing transfer posting from storage location to storage location with single step.But Movement Type 201 is to have consumption entry with respect to cost center etc...
    You are creating a reservation using 311 movement type and while posting the entry you are selecting the"Executable action in MIGO" is "A08-Transfer Posting" so system will always use the movement type used at the time of reservation only.Here you can not change.
    And more over if you process entry with 201 movement type system creates accounting documents but with movement type 311 system will not create accounting documents.
    Regards,
    Pardhu

  • Why mvt types needed

    Please tell me what is the use of mvt types in sd.
    I have seen so many mvt types like Normal Delivery - 601
    Consignment Fillup - 631 etc.
    why we need them? without them what will happen.
    please tell me with an example why it so needed.

    Hello,
    When you enter a goods movement in the system, you must enter a movement type to differentiate between the various goods movements. A movement type is a three-digit identification key for a goods movement. The movement type is important because it controls the screen layout, adjustment of inventories, the GL account for financial purposes etc.
    Eg: 601 Goods issue for delivery In Shipping, this movement type is created automatically with the Goods issue for delivery function. The quantity is taken from unrestricted-use stock.
    631 Transfer posting unrestricted use - customer consignment stock (Shipping) The quantity is transferred from unrestricted-use stock to consignment stock at customer.
    Prase

  • Automatic TO Creation and Confirm for the 321 Mvt type

    Hello Experts,
    Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
    I have already activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe
    2.TO item to be confirmed immediately
    3.Propose confirmation
    Table T333 -AUTTA
              T333-SQUIT &
              T333-VQUIT is activated.
    Please let me know any other settings to be performed
    Regards
    Krishna

    Hello Experts,
    I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
    I made the below settings
    I have activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe   -"A"
    2.TO item to be confirmed immediately  - tick mark
    3.Propose confirmation   - tick mark
    Table T333 -AUTTA
    T333-SQUIT &
    T333-VQUIT is activated.
    I have activated in OMKX as below
    Table T321-TBFKZ Immediate TO Creation with "A"
    T321-TAFKZ TR creation with "X"
    After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
    Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
    Thanks & Regards
    Krishna
    Edited by: Hariharan krishna on May 25, 2011 8:01 AM

  • Automatic Posting accounts are posting to Dummy Profit center....

    Hi experts....
    We are configured New GL
    Generally we are creating Customer Invoice (T. Code: VA02) and
    Vendor Invoice (T Code. MIRO) for WBS Element only. While posting the
    customer/Vendor Invoice System is not checking that CO Object (WBS
    Element) in main line item (Sales/GRIR) as well as Automatic Account
    assignment setting (T. code: OKB9). System is showing the Error. If
    that G/L Account is not a cost element then system is posting to DUMMY
    Profit Center in place profit center assign to that WBS Element
    Requirement:
    We need to post tax and Customer/Vendor line items in document
    against WBS Element which should be picked up from Sales/GRIR Line Item
    of the same document. If there is no CO Object (WBS Element/Cost
    Center) in Sales/GRIR line item in document then based on Automatic
    Account assignment configuration (Valuation Area is Mandatory) system
    has to post to Cost Center/Profit Center
    We are not maintained any derivation rule of PC & Edit Constants for Nonassigned Processes in New gl config. then also system posting to Dummy PC only.
    We can delete that dummy?
    or any configuration changes needs for it. plz give me ur valuable suggestions
    Please Do needful
    Thanks
    Bhagiradha

    Hi,
    You have to maintain Dummy profit center, it is mandatorily for configuring profit center accounting . If u have not maintain Default profit center to that cost element, it will directly flow to Dummy Profit center. Better to maintain default profit center and u cannot delete  the Dummy profit center.
    Regards,
    Sreekanth

  • Automatic PO for Mvt type 101 & 161

    Hi All,
    I need to creates Automatic PO for Goods Receipt with movement type 101 & 161.
    I have set Automatic PO check for both the mvt types.
    Vendor Master & Material Master has Auto PO check.
    Let me know how do i use 101 mvt type, which T-code should i use.
    Regards
    Raghavendra

    Hi,
    Follow these steps for autopo at GR
    1. OMJJ - Activate "Atuomatic PO" indicator for movement type 101,161
    2. SPRO > Enterprise Structure > Assignment > Materials Management > Assign standard purchasing organization to plant
    3. SPRO > Materials Management > Purchasing > Define Default Values for Document Type > Assign PO DOcument Type for e.g. "NB" to TCode "MB01"
    4. MM02 - Under "Purchasing" view of Material, activate "Auto PO" indicator.
    5. XK02 - Under "Purchasing Data" Screen of Vendor, activate "Auto PO" indicator.
    6. ME11 - Create Purchase Info Record for Material and Vendor combination under Plant and Purchase org.
    7. MIGO - Choose Goods Receipt-PO,Than go to the Plus(+) icon in document overview of MIGO screen and click on that.Than fill up the material code ,Plant code and quantity etc as is being done in normal GR. Also fill up the vendor code against whom Auto PO check has been done .Also choose the movement type as per your requirement. Than save . Now the PO will be generated in the background.
    Dhruba

  • MB1B, Mvt Type 351 not posting to "stock in transit"

    Hello Experts,
    I have created the STO. Now I am executing MB1B with mvt type 351. When I open the material document created, I look at the financial documents, the stock value has been relieved from the supplying plant and posted to the receiving plant. I thought  using the 351 mvt was to put the stock in a status of "stock in transit". Only when the receiving plant performs the goods receipt should the stock value post in their plant. Am I using the wrong mvt type or is there a setting I must do to be able to post a material to "stock in transit" status?
    Thanks in advance for your help!

    Hi
    check follwoing links
    [stock transit 351 movement type;
    )Make sto with t code:me21N at receiving plant.
    2)go to MIGO make goods issue agaist the above sto from the supplying plant (movement type:351)
    3)go to migo and make GR(movement type:101) at receiving plant agaist material issue document no or sto
    For this you need to maintain some configuration at
    SPRO: MM > Purchasing > purchase order > set up Stock transfer order
    check your settings at this node:
    "Assign document type . one step procedure, undelivery tolerance" mention supplying plant,
    receiving plant, document type and tick required check boxes
    Regards
    Kailas ugale

  • Excise Posting in Mvt Type Sample Withdrawl

    Hi
    1) client is manufacturing goods in batches.
    2) They keep sample for testing from each batch, Since it is finish goods and consider as exciseable material.
    3) Every sample are posted through Mvt Type 333 to Consumption account.
    3) Actual requiremnt is create new Mvt Type for the Sample withdrawl, For which two accounting posting done in the system.
    One for the material and
    second for the Excisable document.
    I have copied Mvt Type 333 and created new Mvt Type 733.
    At where i can do customizing for the Excise posting.
    Please help
    Thanks

    Hi,
    As I believe youu2019re mentioned about finished goods and 1st decide, when excise going to be applicable:
    Once finished goods manufactured in the factory
    OR
    Once finished goods goes out from factory premises.
    If excise applicable for  finished goods when goes out from factory premises, then no need to worry ,just after production you can take sampling where you will have two accounting enter which reduces from inventory stock of  finished goods  by debiting G/L account of sampling.
    If excise applicable for finished goods when just finished manufacturing in the factory, then you need to find how to do it , which & when register (RG1) to update with which movement type and then think about sampling.
    But if for sampling excises need to be updated, then movement type must be added to update excises.
    NOTE:
    Movement types specified relating to goods receipts involve excise invoices & which excises register need to be updated in the following path
    SPRO ---> Logistics general -> tax on Goods Movements-> India -> Business Transactions-> Specify Which Movement Types Involve Excise Invoices
    Regards,
    Biju K

  • Automatic creation of Purchase order not possible for 103 mvt type

    Hi,
    If i could configure "create p.o automatically", while doing G.R for mvt type 101,
    why cannot i do the same with 103 mvt type.
    I checked the checkbox "create p.o automatically" for movement type 103 and tried to do G.R for others using Mvt type 103.
    It is throwing error as "Update control of movement type is incorrect (entry 103 x x).
    Which entry controls the above my requirement?
    Please advise .
    Thank you.

    Hi,
    These are std which is provided my SAP, you can configure for automatic PO creation for 101 movt type only..........

Maybe you are looking for