Mvt Type

Hi Friends,
                I have some clarification in mvt type - 121
121-Sebsequent settlement of stock with subcontarct order.
I tried in GR with respect to Subcontacting P.O with Mvt type -121  for the reconsilation stock from Vendor...
System throws the error message-  This Mvt type not done by manualiy...
Moreover i want to know, that reconsilation stock are normally collect by  this Mvt type(wihout exice,57F4 challan)
From sas....

hi,
subsequent adjusmnet are done for adjusting the component consumption done in SC process.
when u craete the SC PO, u r paying the conversion charges for component conversion.
here u will do 101 for in coming material and auto matically system proposes consumption of component by 543.
after booking the consumption by 543, in later stage if u find there is a deviation in actual and planned, u can go fo sub sequent adjustment.
here 101 qttttty will remain same & u r using 121 mvt type incoming material where the qty will be zero during sub sequent adjustment, only component consumption has to change and it will be effectedby 543/544.
pl. check in ur dev or quality client
stocks are not collect by 542/545
consumption is done by 543/544
(receipt of sc by-product is 545)
Edited by: SURESH SHENOY on Jan 17, 2008 8:52 AM

Similar Messages

  • Report for Mvt Type 103 & 105

    Dear Gurus,
    Is there any report which will show the corresponding material document of 105 MVT/ 104 MVT type  for 103 MVT type Material document
    Regards,
    Rajesh

    Hi,
    What you have to do is:
    Enter Tcode MB51...Enter Mvt type 103  and in to enter 105..
    Now clcik on F8 Button...It will display you the result as per what you have expected..
    Cheers!!
    Utsav

  • Mvt type 103 and 105

    Dear all,
    I am doing GRN through 103 mvt type of 100 Qty. But at the time of 105 Mvt type qty found 90 that means 10 Qty still pending in block stock. How to process with 10 Qty in block stock which is due to vendor mistake. Please suggest exact procedure and accounting effect on the same.
    Regards
    Atul

    While posting the document against the movement type 103, no FI documents get generated becasue there is no valuation for the materials at the blocked storage Location. The FI document is generated with the movement type 101 and 105.
    In this case, you can cancel the material document number created by the movement type 103 by 104. Then again you will have to do the GRN in 103. The quantities in the material document number created by 103 movement type can't be modified.
    Secondly, if you have the final GRN against the 103 document, then you will have to return the stock by movement type 122.
    Still any queries, revert back.

  • Report to check the stock transfer through 303 mvt type

    Hi,
    I understand that the stock transfer can be done through two ways
    1. Using 351 against UB PO and go MIGO using 101 --> Can be checked in the report MB5T, for stock in transit
    2. Using 303 and 305 mvt type --> the stock lies in Stock trans(Plant)
    When we do 303 mvt type, is there any standard report to check the stock in stock trans (Plant) ? Please let us know.

    hello
    for this you can use MB51 only. same report you can give the movement types as 313 & 315.
    Laxman

  • Auomatic TO creation and confirmation from PCN with 321 MVT type

    Dear Friends,
    I am facing following WM issue, Kindly go through it and reply me with your valuable solution.
    In my plant QM is active, so while receiving goods against any Purchase Order (MVT TYPE 101), all my stock goes to quality. After UD check, 99% material move to unrestrictd stock (321 mvt.type) and 1% used for quality (331 mvt. type).
    For an example if I have received 1000 kg material (which initially goes to quality), after UD 995 kg material come to unrestricted stock and 5 kg used for quality check.
    In my existing system for material document with mvt. type 321, one PCN is generated in the background, and using LT05 we make TO from PCN and confirm it.
    But is it posible to create the TO and confirm from the PCN (Mvt. 321) in the backgroung itself, i mean to say that while my QM user is doing UD, material document with mvt 321, one PCN and TO will be generated and TO will be confirmd in the background itself.
    I don't want to use LT05  separetely to make TO from PCN.
    Please reply me soon.

    You need to make the config settings here in ur system.
    SPRO > Logistics execution >  WM > Interfaces > Inventory Management > Activate Automatic TO Creation
    Assign the relevent setting to movement types...
    Hope thsi helps
    Thanks & regards
    AHP

  • Automatic TO Creation and Confirm for the 321 Mvt type

    Hello Experts,
    Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
    I have already activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe
    2.TO item to be confirmed immediately
    3.Propose confirmation
    Table T333 -AUTTA
              T333-SQUIT &
              T333-VQUIT is activated.
    Please let me know any other settings to be performed
    Regards
    Krishna

    Hello Experts,
    I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
    I made the below settings
    I have activated in OMKZ as below
    1.Automatic TO for 321 mvt ytpe   -"A"
    2.TO item to be confirmed immediately  - tick mark
    3.Propose confirmation   - tick mark
    Table T333 -AUTTA
    T333-SQUIT &
    T333-VQUIT is activated.
    I have activated in OMKX as below
    Table T321-TBFKZ Immediate TO Creation with "A"
    T321-TAFKZ TR creation with "X"
    After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
    Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
    Thanks & Regards
    Krishna
    Edited by: Hariharan krishna on May 25, 2011 8:01 AM

  • Error while doing GR for mvt type: 501

    Hai
    Whenever i do a G.R with out P.O (mvt type 501) i encounter the following error
    "field selection for mvmt type 501 / acct 895000 differs for vendor goods movement (014)"
    How to fix this?
    Thanks

    Hi,
    Check the G/L account 895000 in t-code FS00, whether the G/L account's Field status group seems t0 be inconsistency in it.
    Goto FS00, put your G/L & company code, goto tab Credit/Bank/Interest- DOuble click on filed ststus group.
    Check filed selection there.
    Make it mandatory /suppress/optional for both as per the requriment..

  • Automatioc TO creation with mvt type 331(WM)

    Dear Friends,
    I am facing following WM issue, Kindly go through it and reply me with your valuable solution.
    In my plant QM is active, so while receiving goods against any Purchase Order (MVT TYPE 101), all my stock goes to quality. After UD check, 99% material move to unrestrictd stock (321 mvt.type) and 1% used for quality (331 mvt. type).
    For an example if I have received 1000 kg material (which initially goes to quality), after UD 995 kg material come to unrestricted stock and 5 kg used for quality check.
    In my existing system for material document with mvt. type 321, one PCN is generated in the background, and using LT05 we make TO from PCN and confirm it.
    But is it posible to create the TO and confirm from the PCN (Mvt. 321) in the backgroung itself, i mean to say that while my QM user is doing UD, material document with mvt 321, one PCN and TO will be generated and TO will be confirmd in the background itself.
    I don't want to use LT05  separetely to make TO from PCN.
    Please reply me soon.

    Use RLAUTA11 SAP Report - Create transfer orders for posting change notices automatically.
    Thanks & Regards,
    Sudhakar

  • IR of WITHOUT PO (WITH MVT TYPE 501)

    HELLO EXPERTS,
    when I go for GR without PO with movement type 501, i dint find any delivery note field in MIGO SCREEN.
    so can anybody help me how to get it.
    If it is not possible than how to do MIRO (invoice verification), with any reference document, like delivery note,vendor or something else.
    because my project is in GO-LIVE phase, there is some GR WITHOUT PO.
    so if I don't have any reference document, my data entry will get doubled (GR,than IR)
    SO can anybody suggest me , if there is some other way..so that while i m going for IR data is not required,i e. there is some reference document from which I can copy my data.( like PO BASED IR )
    kindly help me out.
    regards..
    Raghu

    Hi
    You can upload the initial balance of inventory (GRed but not Invoiced) in MM and let FI upload initial vendor balances (to be paid to vendors - open invoices). There after FI can match these two  (intial upload accounts). Or else do GR with mvt type 501 and then post FI invoice - debiting consumption account and crediting vendor account. But result is same as explained above.
    Thanks

  • Automatic creation of Purchase order not possible for 103 mvt type

    Hi,
    If i could configure "create p.o automatically", while doing G.R for mvt type 101,
    why cannot i do the same with 103 mvt type.
    I checked the checkbox "create p.o automatically" for movement type 103 and tried to do G.R for others using Mvt type 103.
    It is throwing error as "Update control of movement type is incorrect (entry 103 x x).
    Which entry controls the above my requirement?
    Please advise .
    Thank you.

    Hi,
    These are std which is provided my SAP, you can configure for automatic PO creation for 101 movt type only..........

  • Automatic creation of Batch using mvt type 311

    when i am trying to transfer material from one storage location to another using mvt type 311. the system is not creating the batch automaticcally.
    I have already maintained allthe basic configuration required for this.even in IMg ->logistic general->batch management---->creation of new batch in this path also for mvt type 311 i mainatined (automatical/manual without check)batch creation.but still the system is not generating the new batch.
    Can anybody help in this issue.
    Thanks in advance

    Hi,
    When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
    You need to use following user exit at batch creation
    EXIT_SAPLV01Z_001
    EXIT_SAPLV01Z_002
    Hope this helps, reward if useful,
    Best Regards VS

  • Error while doing GI to cost center (201 Mvt type)

    Hi,
    While I tried to do Goods Issue to Cost center through mvt type 201. I get the following error.
    "Account type K is not defined for document type WA"
    Kindly help reg it.
    Regards,
    Vimal

    Hi,
    Go to OMB6 and maintain the Entry in this field is optional.
    Thanks & Regards,
    Kiran

  • Goods Receipt Mvt Type 501

    Hi Guru,
    I did a Goods Receipt for NonValuated Materials with Mvt type 501. When displaying the Material Document, I noticed when I clicked on Doc. Info. tab that in front of Transaction Code: Goods Movement box, there is MIGO_GI sign instead of MIGO_GR as expected (since it is a goods receipt). Could you please tell me what to do to get the correct sign MIGO_GR?
    Thx in advance.
    BD

    Hi,
       The MIGO header will show the transaction code and its description only. The transaction code is the transaction code used for posting the doc and the description is maintained in table TSTC against the transaction code. There will be only one description for a transaction code and the description for MB0A or MB01 is maintained as "Post Goods Receipt for PO" in TSTC table. Hence the same is available in MIGO header, if the transaction code is MB0A or MB01.
        The movement type differentiate whether the goods movement is for PO or without PO. Still the transaction code and the description will remain the same.
    Hope its clear.
    Regards,
    AKPT

  • Accounting documents not getting generated for mvt. type 221 Q

    Hi friends,
    When goods are issued for consumption for project accounting documents are not getting generated.
    I have tried with mvt. type 412 Q, 211 Q,
    by mvt type 412 Q, the stock is transfered to project stock, it shows the stock of material in project stock, by movement type 211 Q the project stock gets consumed. So at the time of consumption of consumption account should hit and relevent accounting document should get generated. this is not happenning.
    When i check material document and check for accounting document, message flashses that movement is not rrelevent for accounting.
    Can any one throw more light on this?
    Thanks and regards
    SAP MM

    Hi,
    Please check in PO item details Delivery tab. In that GR Non-valuated checkbox might be checked.Generally for account assignment category asset it is ticked.
    If you tick GR non-valuated check box then at the time of GR accounting document will not be created.Accounting document will be created only at the time of IR.
    or
    Have you mantained Chart of accounts.
    have you mantained Valuation area settings
    Transaction event key
    Valuation class settings.
    Check your material master data in accounting view have mantained Valuation class.
    Check your back ground settings OMWN.

  • Is it possible to create double grn (material document) against a 103 mvt type (gr blocked stock)  .  how  to  restrict  it  in system.

    Actually  we  have gate entry  system  (103  mvt  )  during  migo  and  make  105 mvt  against  the 103  material  doc.
    and  also  have restriction to make  double  entry  against  the same material doc (103).
    In po the amount  is  let 100  qty   ,   but  how  po  allow  to  make  200  qty.
    Kindly point  out  What  is  the cause  for  it  and  how  to  restrict  it.
    The above showing  the Line  item no 1500  Double  GRN is  made against 103 mvt  type  bypass error msg. and  po  qty.

    Yes  Abhishek,
    You  are right i also agree with you , it is a standard  sap , System never allow to change the error to
    warning , i also tested in quality client it's ok.

  • Special stock indicator O to mvt. type 201?

    Dear All,
    The requirement is to clear the outside vendor stock against a cost center via migo.
    Can we add special stock indicator O to mvt. type 201 ?
    Can you also throw some light on the background of the process.
    Thanks in advance.

    Hi
    You will not be able to add Special Stockindicator O to 201, even of you copy the movemnt & create a new movemnt , you will not be able to add the new entries.
    Best way is to get back the Stock into Unrestricted use using 542 & then Post the goods issue using 201.
    Thanks & Regards
    Kishore

Maybe you are looking for