MWI on mobile phones (CUC 8.5)

Hey.
Anyone played with getting MWI information from the Unity connection (8.5) to a mobile phone
I have it running on a unity 4.x on the windows platform, but i can se any documentation on the informix on the CUC
Can anyone help??
Best regards
Thomas Johannesen

Hey,
We are using the NowSMS gateway (http://www.nowsms.com/) for this.
For this to work, we are export the MWI status on every IP Phone to an external DB (this status is in a table on the unity server), and compare it with an DB with the status of the MWI on the mobile devices (this db is updated from unity every 30 sec). If there is an difference in the Unity MWI tabel and the Mobile device MWI table, we are sending the new status to the nowSMS server, thats sending the new status to the phone.
MWI activate on mobile:
http://NOWSMSserverIP:8800?PhoneNumber=12345678&VoiceMail=1
MWI deactivate on mobile:
http://NOWSMSserverIP:8800?PhoneNumber=12345678&VoiceMail=0
This works on almost every mobile device (We have it running on Nokia, Blackberry, LG, Samsung, Iphone, HTC at our customers.)

Similar Messages

Ipad 2 is associating with mobile phone # instead of it's own #

Hi I recently update to iOS 6.1 on my iPad and when it was all finished with the update i was distracted when it asked me about my phone # for facetime and messaging and i just hit ok then later I realized it pulled my mobile phone # into it instead of it's own number and I can't get it out of there. I restored it back to factory settings and a back up before I turned on my data plan and added it's own number and I still can't get rid of my mobile phone number or change it back to it's own data plan # HELP!

That doesn't solve the problem. I have all those defaults. But in Firefox, it won't let me select for "Portable Document Format" to "Use Adobe Acrobat (in Firefox)" which it used to let me and which is what the Mozilla Firefox help stuff says to do. I can select Adobe Reader but then it downloads it and opens it in a separate reader window rather than using the plugin. If I select to let Firefox "Preview in Firefox", then the Firefox built-in PDF reader will display it. I have added an add-on "pdfViewerSwitcher" which then lets me display in the Adobe Reader plug-in but only after first displaying it in the Firefox preview. So that verifies that the Adobe Reader plug-in works. But I can't set it to always use the Adobe Reader plug-in.
I have some reasons for wanting to use the Adobe Reader plug-in. I use Nuance Power PDF Pro for editing and doing other things with pdfs.
This all used to work and stopped working at some point in the last couple months. And if you search the web, you will find I am not the only one with this complaint.
I don't know whether it is Adobe's fault or Mozilla's fault but at least one of them is broken. And I think it is Firefox since it won't even let me select it but does let me select it for Adobe Forms.

Error when trying to sign in on mobile phone

Dear Admin,
I want to browse the ORACLE ADF FORUMS in my mobile phone (nokia x2-01 with UC and Opera mini Browser), the forum page opens correctly but when i try to signin it gives me error.
ORACLE ACCESS MANAGER
ERROR:
System error. Please re-try your action. If you continue to get this error, please contact the administratorIts strange that when i try to do same using my PC it works......
Any Ideas?? Can any one there resolve this issue....
Regards,
Santosh

Probably because Opera is a non-supported browser on Oracle sites...

Can not see the contacts in E63 mobile phone

Hi,
I amusing E63 mobile phone. I am not been able to view the contacts in the mobile, so not been able to use the same. But when an incoming call comes in I do get the name resolution of the person calling and his mobile no which is stored in the contacts.
I tried backing up the mobile and all the time the backup of contacts could not happened and besides Contacts rest all is backed up....
Pls do let me know how to resolve this issue..
Thanks in advance...

Hey kartik_sh
Welcome to the forum, your contacts are on the sim card and they will need to be either copied to Contacts on your phone for easy access.
It is not clear from your description what could be causing this issue, so I will present a couple of possibilities. The first is that the contacts that you cannot see are stored on the SIM card and not in the phone memory, to remedy this you can follow these steps to copy your contacts into the phone memory:
Menu>Communic.>Contacts>Options>SIM contacts>SIM directory>Options>Mark/Unmark>Mark all>Options>Copy to Contacts
If this is not the case, and if after selecting Contacts you see the options Go Online and ChatServiceBuddy, it means that the ”Ovi Contacts Chat” service is selected as the default view. This service has been discontinued and replaced by Nokia’s new Chat service powered by Yahoo. You can set your default Contacts view back to the contact information stored in your phone by following these steps:
•Select Menu>Communic.>Contacts
•Press the left navigation key to select the central field at the top of the screen, then press the centre of the navigation key to open the menu, and finally select Phone
•You should now see the contacts stored in phone memory. To make this the default view, select Options>Settings>Default contact list>Phone
If you are interested in the new Chat application, you can switch the Contacts view back to the Ovi Contacts view, select Go Online and sign in with the same user identity and password that you use to log into this forum. Your phone would then remind you that Ovi Contacts Chat is discontinued and take you through the steps to download and install the new Chat application. We would recommend that you use a WLAN connection for this.
If the two suggestions above do not resolve your issue, we can investigate further.
Out of interest, when you say that creating a back-up did not successfully back-up contacts, do you mean that you created the back-up with Nokia Suite and the report displayed at the end of the process indicated an error? If there was no error during the back-up process, it is likely that the back-up was successful and we still need to work out whý the information is not appearing in your phone.
Let me know if it works
Kind regards
Carl
If this post answers your question, you can help others by clicking the green accepted solution' button.
Please ask your questions to the main board and not to my mailbox. Thank you.

How do I know if my Edge Animate compositions will scale up or down to fit each mobile phone platform's resolution? iPhone 3s, 4, 4s, 5, and 5s all have different resolutions. Do I use .png or svg?

I want to use Edge Animate to create native app in PhoneGap Build. How do I know if my Edge Animate compositions will scale up or down to fit each mobile phone platform's resolution? iPhone 3s, 4, 4s, 5, and 5s all have different resolutions. And do I use .png or svg?

If you use responsive scaling it will definitely scale .
For best practises regarding graphics refer
Edge Animate Help | Best practices for graphics in Adobe Edge Animate

How do I use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?

We are attempting to use SharePoint 2010 in combination with Exchange 2010 to implement shared calendars and contact lists throughout our organization. We are able to connect the lists to Outlook 2010, but have been unsuccessful in viewing
the calendars and contact lists from our mobile phones. How do we use Active Sync to view SharePoint Lists (Contacts and Calendars) on a Mobile Phone?
In trying to answer this question, we have come across a few different possibilities, all of them falling just short of a long term solution for us. After doing research, we found that Active Sync will only show the default folders of the account. To
solve this, we downloaded an Add-In for Outlook (CodeTwo FolderSync) to synchronize folders and synchronized our SharePoint list with a new Contact list in the default folder. The issue we came across with this method is that the Add-In we are using
is not capable of automatic synchronization. There is a button and it must be clicked after every update is made, which is not ideal for our solution. We then went to the company (CodeTwo) and found server side software (Exchange Sync) that they
offer which will automatically synchronize the folders. After installing that on the Exchange Server, we now are running into the issue of not being able to locate the SharePoint lists on the Exchange Server.
Does anyone happen to know how we can get to the SharePoint lists from the Exchange Server? Has anyone else been able to use shared contacts lists and calendars from SharePoint on their mobile phones using Active Sync? If so, are we in the right
direction with what we have found so far?
Thanks,
Brad

You cannot use ActiveSync for that, but there are SharePoint clients for the iPhone. Windows Mobile 7 natively supports SharePoint with SharePoint Workspace Mobile, part of Microsoft Office Mobile. Android and BlackBerry might also have some apps.
Use Microsoft SharePoint Workspace Mobile
http://www.microsoft.com/windowsphone/en-us/howto/wp7/office/use-office-sharepoint-workspace-mobile.aspx
iPhone SharePoint Apps Shootout
http://www.codeproject.com/KB/iPhone/iPhoneSharePointApps.aspx
Comparing SharePoint iPhone Apps
http://blog.praecipio.com/2010/11/02/comparing-sharepoint-iphone-apps/
MCTS: Messaging | MCSE: S+M

Using HP ePrint with mobile phone internet connection

Hello, I have a peculiar problem.
I have an HP Officejet 4630 e-All-in-One series printer and I want to set up HP ePrint.
I have internet connection for my laptop computer, which is the computer I use. It too is a HP. To set up your HP ePrint account you need the printer's code number which can be printed from the printer's control panel. Once you have the printer code, you can then enter it in to your account to add your device. My problem is that my interent connection is the mobile phone which I use to connect my laptop to the internet. The printer is then connected to the computer using either the direct wireless feature or using the supplied USB cable. Because of this, I can't obtain the printer's code, from the printer's control panel. I do not use landline internet connection as the mobile phone is used as a modem.
What do I do?????????
Can I just phone technical support and ask them to email my printer code??????
This question was solved.
View Solution.

Jagaccountant wrote:
... Can I just phone technical support and ask them to email my printer code??????
Hi,
No, this is not going to work and WON'T work at all. Your printer MUST be connected to the internet to allow ePrint to work. No point to send an email to printer and it is NOT there.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

My nano SIM works in my Nokia mobile phone but "No SIM" when in my iPad mini

I've been around the support loop a few times with varying levels of success, here is my story.
Basically I expect to only occasionally require mobile data services so would like to move my nano SIM from my Nokia mobile phone to the iPad mini as and when required. I have a 500Mb data allowance on my current contract with Vodafone UK which I never use but would like to access with my iPad mini.
The first time I tried it worked! I never tried to surf using it but it registered with Vodafone UK OK and had a good signal level. The second time “No SIM” or “SIM not installed” popup at bootup.
Now irrespective of contracts, tariffs, data plan etc I expect the iPad mini to recognise there as being a SIM present every time and never give “No SIM” except of course when there isn’t one physically in the thing.
Playing along to support and forum suggestions I’ve done a couple of device resets (software reinstalls) and various setting resets. But still “No SIM”.
I’ve also spoken with Vodafone UK and am investigating whether this is in fact some restriction where they’ve restricted the technology so SIM swapping is not allowed. My Nokia E51 is not locked as have had it years.
I just cannot get past the “No SIM” message though!

Do have the details as to why that is?
The single time it recognised the nano SIM and showed as being connected to Vodafone UK I tried to ring it to see what would happen, it just rang out until voicemail picked up but nothing happened on the iPad mini whatsoever.

How to connect PC to a mobile phone to make a call.

Hi all,
I want my PC to control the mobile phone (its a CDMA phone). I want to connect the phone with my PC through some cable, then I want to control the phone using the program running on my PC.
Like, I want my program running on PC to make calls through the mobile phones.
Does anyone have any idea that how can I do it, what API should I use, any sample code or example.
Thanks.

Except TextNow is another Voip service. Just like Skype, Viber, etc. It may be a good Voip product but it doesn't use the mobile cellular network which is what the OP was interested in.
http://support.textnow.com/entries/20588531-What-is-the-Difference-between-A-Tex tNow-Phone-Number-and-TextNow-Address-
Many iPad models now have exactly the same hardware as iPhones and should be completely capable of making and receiving calls and texts using a cellular network. Yet they cannot, because Apple limits this functionality through the ios.

Satellite M40-237: How to connect the mobile phone with Bluetooth

I have a new Noki 62333 and I have a Satellite Toshiba M40- 237. I have a big problem with the conection between them. I don t know how to turn on bluetooth on my pc. Can you help me????

Hello Iva
A friend of mine has Satellite M40 and I know that this unit is delivered without BT module. If the unit has BT module you will find BT label on the bottom side of your notebook.
To establish BT connection with his mobile phone he uses BT USB stick.
By the way: does Iva comes from Zagreb, Croatia?
Bye

Mobile menu works on pc but not on mobile phone

If I test the link, below, on my PC (it is my mobile phone menu), it works fine.
If I test it on my Galaxy S5, however, it seems to cycle back to menu without displaying the link.
Can anyone help me with this?
Glenn's Photographs
Thanks,
Glenn
Here is the actual code:
<!doctype html>




<html class="">

<head>
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1">
<meta name="description" content="Photographs and Paintings">
<meta name="keywords" content="photographs, creative photographs, art, painting, paintingst">
<meta name="author" content="Glenn Abelson">
<title>Glenn's Photographs</title>
<link href="../../boilerplate.css" rel="stylesheet" type="text/css">
<link href="../../index.css" rel="stylesheet" type="text/css">



<script type="text/javascript">

</script>
<script type="text/javascript">

if ((navigator.userAgent.match(/iPhone/i)) || (navigator.userAgent.match(/iPod/i))) {
   location.replace("index_mobile.html");
</script>
<script src="../../respond.min.js"></script>
<style type="text/css">
-->
body {
    background-color: #3b424d;
    background-image: url();
body {
    background-color: #3b424d;
#apDiv1 {
    position: relative;
    width: 200px;
    height: 115px;
    z-index: 1;
    left: auto;
    top: 1px;
#bkgrnd {
    position: absolute;
    width: 326px;
    height: 637px;
    z-index: 1;
    left: 4px;
    top: 12px;
a:link {
    color: #9FF;
a:visited {
    color: #FF9933;
a:hover {
    color: #FFC;
#apDiv2 {
    position: relative;
    width: 289px;
    height: 84px;
    z-index: 2;
    left: auto;
    top: 233px;
    color: #FFF;
</style>
</head>
<body><img src="images/index_mobile2.fw.png" alt="Glenn Abelson Photographs" usemap="#Map" longdesc="http://www.abelson.com">
<map name="Map">
<area shape="rect" coords="16,8,50,29" href="../../index_mobile.html">
<area shape="rect" coords="30,247,211,271" href="creative_part1/index.html">
<area shape="rect" coords="30,277,213,293" href="creative_part2/index.html">
<area shape="rect" coords="32,323,111,345" href="landmarks/index.html">
<area shape="rect" coords="27,296,109,320" href="animals/index.html">
<area shape="rect" coords="32,351,112,368" href="landscapes/index.html">
<area shape="rect" coords="32,422,98,444" href="people/index.html">
<area shape="rect" coords="32,444,118,465" href="perspectives/index.html">
<area shape="rect" coords="30,471,123,495" href="street_scenes/index.html">
</map>

</body>
</html>

All the menus are image maps. Three out of four work.
My div text menu on top of an image gave me similar problems.

Sending text message/SMS from mobile phone to Skyp...

Hi,
This is going to sound rather complicated but I'll try to explain my question as clearly as I can. I'm currently in Singapore and using Skype to keep in touch with my boyfriend in the U.S. I set up a Skype caller ID number several days ago so that when I call my boyfriend through Skype, he can see that caller ID number and know it's me. My question is, is it possible for my boyfriend to text me on that caller ID number using his mobile phone? And if so, will I have to be signed into Skype to receive his message? How will I be charged?
Thanks.

hi,
SMS API(WMA) is an optional package. It is not a MIDP1.0 or MIDP2.0 api's.
There are phones which has WMA api with MIDP1.0 support .... Nokia 3650
Seimens has some phone with their own api's to send sms.Check out seimens site for more info
BTW, What do you mean buy sending SMS to Server????
If you want to send message to server you can do it with Http.
HTH
phani

Print from mobile phone

How can i print from my smart phone. App already installed and computer is on

Hi atubens,
Depending on what mobile phone and what printer you have, the solution could differ.
If you have an ePrint capable printer, universally you could email a print job to the printer's ePrint address.
If you have the HP ePrint Home and Biz app, you can print photos, documents and from the web over the local wireless network from within the mobile app.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How to use mobile phone number on iPad mini after iOS8 update?

I updated my iPad Mini to iOS8, but not my iPhone 4 because I'm getting the 6 in a few weeks. Now, I can't send/receive iMessages from my mobile phone on my iPad. Any suggestions on how to fix??
Thanks!

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Troubleshooting Messages http://support.apple.com/kb/TS2755
 Cheers, Tom

How to move iMessage account to different mobile phone number

Hello
I am going to change mobile phone number and I would like to know how
1) move iMessage/faceTime to this new phone number
2) how to transfer the "history" (old messages) from my old phone number to the new one
thx

Hello, matteos72.
Thank you for visiting Apple Support Communities.
Make sure that your new number is updated in Settings > Phone > My Number. Once this done, follow the steps in the quoted section below. Next, sign back into iMessage and FaceTime. The history will not be modified as no data is deleted.
Unlink a phone number
To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages. If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
Note: If you no longer have access to the iPhone that is using the number you want to remove, reset your Apple ID password.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
Jason H.

MWI on mobile phones (CUC 8.5)

Similar Messages

Maybe you are looking for