MWMK0001 - Assign external number to Storage Unit through MWMK0001

Hi all,
During Goods Issue, I need to set the SU number using an external numbering. In particular I need to set the SU number equal to the material batch number.
I've found the user-exits contained in MWMK0001, in order to do this. Unfortunately these user-exits don't contain any data regarding TO.
I've also seen the user-exits MWMTO003 but I need only to change SU number, not the destination storage bin too.
Is it possible to do this?

Hi,
Check the data in the Transfer Order, the item (such as the quant number, storage bin or storage type) does not belong to the storage unit number that you entered.
For more check the link:
http://help.sap.com/saphelp_45B/helpdata/en/c6/f83e194afa11d182b90000e829fbfe/content.htm
Regards,
Biju K

Similar Messages

HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT

HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT
Regards,
Kumar

HAI..
External number assignment
If you want the user to assign the numbers, enter "EX" in the 'NR' field. The number ranges are then indicated by the letters "EX".
Number assignment for plan version 10 / object type S: Subgroup 10S

Assign External Number to BP

Hi Experts.
We are using Standalone SRM.
In this how to assign external number to business partner.I have checked in BUT000 table for my Business partner, in this i can't get any external number assigned to business partner.
Please tell me how to assign external number to BP.
Regards,
Chandu

Hi Chandu
External number range means some external system provides number range for vendor other than EBP
Plz visit BUCF - tcode for BP no range. for eg you pulled same vendor number from r/3 to ebp and it must flag in srm as external.
also see this.cross apllication components->SAP business partners>Business partners>basic setting> number ranges and grouping>Define grouping and assign numbe ranges.
What is your master vendor database system ebp or some external system. if you create a vendors in srm then it is internal only .if you get a vendor from external system then only external possible.
regards
Muthu

Exit for assigning external number range to sales document

hello friends,
can anyone help with this issue.in tcode 'vn01' we are assiging internal number range but we dont want that number range that is external number range rather than using internal number for sales document.i.e the number range should start with 'ufc'followed by some number range.
plz reply as soon as possible .
thanks and regards,
siri

Hi Sirisha,
I believe you can assign external number range manually by using transaction SNRO and then assign the number range before entering into the main screen of VA01 or saving the document.
The number range is linked to the order type (VBAK-AUART), this is done in customizing.
For different sales area it need to have different number ranges for the same order type.
Please see that the same sales doument number should not be linked to several sales orders which are to be created,if I am not wrong
Regards,
Naresh
****Please do reward points if found useful

Assigning mobile number to Business Partner through BADI

Hi Experts,
I have to create a business partner(organization) through a badi with the fields like name name1,name2,street, house number,telephone,email,mobile number. I am stuck in mobile number. I was able to create business partner with all the other fields but i dont know how to get hold of mobile number.Please suggest me functional module or the process of assigning mobile number to the BP.
Edited by: anurag112 on May 18, 2011 2:36 PM

Hi Anurag,
There is a field called R3_USER in the telephone structure(IT_ADTEL). If this field is populated with 2 or 3 which means it is a mobile number. You can use BUPA_CREATE_FROM_DATA FM to create BP.
Regards,
Lakshmi.Y

External Storage units to be entered in the Creation of Transfer Order

Hi Experts,
We have a scenerio where the business creates the Storage units in advance, creates the PO and assigns ithe SU's to the Purchase Order in the custom table. Then creates the Goods reciept using a BAPI which creates a Transfer requirement. Now while creating the Transfer Order for this material document ,
The main issue here is that the businedd needs that if there are any number of Storage units in the Custom table say 3 SU's then the 3 SU's should be entered in the Transfer Order which is created in the bcakground using a BAPI.
please guide us how todo it
Thanks in advance

Hello Kirankumar,
It is possible to assign external number ranges for Storage unit, so maintain storage unit number range to assign SU number externally.
Now when you create Transfer order for material document at that time you can assign SU number externally.
Hope this helps.
regards,
Arif Mansuri

Re : No bin types have been assigned to storage unit type WM3

Hai
I am doing warehouse configuration. While creating transfer order i am getting the following error
" No bin types have been assigned to storage unit type WM3 "
How to solve this.
Thanks
Anto

Hi,
It seems there is some problem with configuration, check in the given path below for configuration.
SPRO-IMG-Logistics execution-Warehouse management-Strategies-Activate Storage Bin Type Search,
here in the first step you have to define storage bin types & in the next step you have assign it to your storage unit type.
Bin types are when you have bin of different dimensions.
Regards
Ravi Shankar.

Creation of HU in auto mode with external number range

Dear Experts,
         I'm stucking in a scenario related to HUM
There are two handling units -
1. Bag
2. Pallet
through T code HU02 , it's possible to create an HU and assign it internal generated number.
But as per our requirement , we want to assign the external number to the HU (which is barcode number of bag or pallet)
Can you pls let me know the process of assigning External number range to HU.
Also we want to create the HU automatically after GR in production (MIGO,101) , instead of manually via HU02.
Pls explin the process of creation of HU automatically also...
Thanks in advance..

Check with FM BAPI_HU_PACK.For packing an item into HU.
For external number range you need configure external number range
SPRO>Logistics - General>Handling Unit Management>Basics>Technical Basics-->Define Number Ranges for Handling Units.
After GR for production you need to confighre internal number range for perticular packing material type then system will automatically pack and place in HU location.
Please find some FM info
=========================
HU_BASIC_BAPIS                 Basic BAPIs for HUs
BAPI_HU_CHANGE_HEADER          Change Handling Unit Header Data
BAPI_HU_CREATE                 Create Handling Unit with Items
BAPI_HU_DELETE                 BAPI for Deleting Handling Units
BAPI_HU_DISPLAY_HISTORY        Displays HU History
BAPI_HU_GETLIST                Read Handling Units from the Database
BAPI_HU_GET_LIST_MSG           Select Handling Unit Output
BAPI_HU_PACK                   BAPI for Packing an Item into an HU
BAPI_HU_PROCESS_MSG            HU Output Processing
BAPI_HU_PROCESS_MSG_DIRECT     Select and Process Handling-Unit Outputs
BAPI_HU_REPACK                 Repack HUs and HU Items
BAPI_HU_UNPACK                 BAPI for Unpacking an Item from an HU
BOR_HU_DISPLAY                 Display an HU in Dialog Mode
===================================

How much storage units can be added in the single bin.

Hi all,
Can anybody tell me how much storage units can be added in the single bin.
Dev

Hi Dev,
AS Prashant & Abhijit mentioned above the maximum storage units in a single bin is based on various factors such the putaway strategy & capacity check you have set for your storage type as well as palletization data.
Now in case of Bulk Storage which you have mentioned above, please go through the below F1 help for the block structure.
In bulk storage, you need to define for each block (or row) how many
storage units fit into the block. For this purpose, you must define
both the number of columns as well as the maximum stack height. *The*
product of these factors usually gives the maximum number of storage
+units and is determined automatically by the system. However, it is+
possible to change the maximum number of storage units to a lower number
if the storage bin or the material features require this.
Hope it helps.
Thanks & Regards,

Customer external number problem

i have given customer external number range
for ex, cna10000 to cnz9999 as i want to know customer by c, and n for north region and a for the alphabet, but system is allowing me to input
cnnnnn100, and other wise also,
how can i restrict that the system
thanks

Dear varada rajan,
If i understood your question correctly that U need to assign external number range with charecter + number .
If this is correct , then
1. Go to SPRO -- Logistic general -- busines partners - Customer -- control -
A. Define Account Groups and Field Selection for Customers :
copy your existing account group and in general data maintain A1 ( you can mention as per your logic ) .
B.Define and Assign Customer Number Ranges -
i. Maintain CNA1000 to CNA2000 and mark tick in External number range
ii. Assign Number Ranges to Account Groups : here you assign the number range against the account group.
Now , you can create customer number range between
CNA1000 to CNA2000.
saravanan

BAPI PO creation by using External Number

Hi ,
I want to create Purchase order with some external number.By using BAPI_PO_CREATE1 i can able to create purchase orders but its generating system generated(internal) purchase order number.In Header Parameters i assigned external number even though system is created Purchase order with the internal number sequence.
Kindly give me the solution for this.
Thanks in Advance
regards,
kishore.

If you pass the BAPI header and headerx structures EBELN fields and the order type has been configured to use external reference numbers, then there should be no problem doing this. What happens if you try to create an order for the same order type in ME21N? Do you get a system generated order number or can you enter it yourself?

How to set external number for SAP shipment ?

How to manually assign external number in alphanumeric like AB07089999 for SAP shipment (via VT01N) ?
Edited by: MicMic on Sep 19, 2011 6:13 AM

Hi,
As i know there is no possibility if alphanumeric number range in sap.You check with any exit before updating the no in database.check this and post .
Regards,
Madhu.

Bapi with external number range

i am using bapi_goodsmvt_create.i want to assign external number range.how it possible?

It depends on whether you have a service master or not.
1. If you have service master, then there will be a service number (just like a material number). You can use that identify which one has to be deleted.
2. If NOT, then they would still send the text for the Service lines (I guess this will be unique for each line item). So, you will have to identify the line to be deleted by that.
Makes sense?
A question - You are saying you will get information to update the PO, but how does the system know which PO to be updated, how are you going to identify which PO needs to be changed?
Regards,
Ravi
Message was edited by: Ravikumar Allampallam

Storage unit error

Hi,
Im doing a transport order and we enter a SU existant. The system display the following error message:
"Storage unit 1000000000 is not consistent with other transfer order data".
We think that we can include in the same SU many materials, storage bin and quant number. It is posible?
Thanks in advance for the help.
Regards
Enzo

Hi Enzo,
In the WM system SU is always unique errspective of material, but you can store multiple material in one storage unit using mixed SU management consept .
For E.x: Two different materials or Two different batch materials can be placed in a single storage unit in this case two quants will be placed in a storage unit.
for the second question, If the stocsk available for the delivery quantity,it can be create single TO for any number of storage units for all the stocks, in this case quants will be different.
Thanks,
Madhu

External number range for Billing Document

Hi Gurus,
Can you please let me know how to get the external number for the invoices? I know there is no standard way but if there is a way around to determine it. And the external number should be first 2 places are alphanumeric and dynamic and the next 2 places are also alphanumeric but constant and the rest of the digits should be a serial number of length 7. So, the total length of the number range should be 11. Please let me know if there is way to determine it this way.
Example:
AB + HY + 1000001
CD + HY + 1000002
Like wise.....
Thanks in advance.
Regards,
Gangi

hello, friend.
you can define your number ranges using VN01. in here, you can set up alpha numeric ranges and specify external.
technically, you can assign this set to the billing type using VOFA.
however, it is not best practice to assign external number ranges to billing types, as it is possible to 'jump' the sequence of the numbering. you do want to keep track of the sequence of billing docs.
a possible exception is if you have an external billing software which generates a number, which you will then capture in SAP. barring exceptions, it is best to retain internal assignment.
regards.

MWMK0001 - Assign external number to Storage Unit through MWMK0001

Similar Messages

Maybe you are looking for