MWST calculation on .... which partner function?

Hello everyone,
Can someone help me with MWST calculations?
On which partner function are they based? my test say that MWST is based on data from the PAYER (Tax category 0 or 1).
However, the field "country of destiny" does is not taken from the PAYER.
Does someone know where is the link between MWST calculation and partner function?
Can it be customized?
If yes, where?
Any help would be highly appreciated,
Regards,
F

Hello,
The system copies the tax classification from the tax information stored in the customer master record of the ship-to party. During pricing, the system uses the tax classification together with the country key (identifies where the customer is located) to calculate relevant taxes.
I hope this helps!
Thanks
Pramila

Similar Messages

  • Need to determine which partner function level is pulling in the currency (

    need to determine which partner function level is pulling in the currency (sold to, ship to , bill to or payer)on sales invoices
    Also I my requirement is to have different currency based on different ship to party for same sold to..then how set up the same

    Hi,
    Yes, that is true. The field borders are not drawn when there is no data for that field.
    Here's a workaround though. Create this formula and use this formula field instead of the original database field on the report
    if isnull({database_field}) or not({database_field} > 0) or not({database_field} = "") then
    space(1) else totext({database_field})
    You can then apply borders on this field and you'll see that the field draws the border when there is no value.
    If the field that is in the Subreport, then it needs to be done in the Subreport, otherwise in the Main Report.
    -Abhilash

  • How to decide which access sequence goes for which partner function ?

    how to decide which access sequence goes for which partner function ?

    Hi Padmaja,
    If i understand your question correctly, below is my answer.
    Lets take a example : In your requirement ..while creating Sales / service order (for ex if you are creating from preceding document)
    you have to pick up the Contact person from preceding document & Employee responsible from responsible organization
    For this in partner function assign Access sequence as below.
    same way if the partner(here ex: Ship to party) has to be picked up from "Current partner" change the access sequence to "Current partner Sold to party"
    Hope this gives better understanding, still for better understanding check the below links
    http://www.guru99.com/partner-processing-in-sap-crm.html

  • Service ORG determination based on partner function

    Hi
    Pls let me know - How to tell from the config which partner function from a transaction say case or complaint, is being used to determine the service ORG unit at the header level of the transaction?
    Also
    Suppose I have 2 partner functions
    1. A - std partner function - rule = "User"
    2. B - custom partner function - rule = "User"
    Which one will the system use?
    Thanks

    Hi,
    You need to define Partner Determination Procedure (PDP) where u r partner function should have 004USER as access sequence, then u can use "User orgunit" rule in org detemination rule to determine service ORG unit at the header level of the transaction.
    If u have define more than one partner function as user in u r transaction system will set the same user in both place on the basis of u r PDP.
    Hope it'll help u.
    Regards,
    Dipesh.
    Edited by: DD's on Nov 11, 2008 6:27 AM

  • Partner function relevant for the credit management.

    Hi,
    Which partner function is relevant for the credit management.
    Regards
    Prabudh

    Hi Prabudh,
       Check this link.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0fde72f-8216-2a10-6e87-e69ab79cb24f
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23
    Much Regards,
    Amuktha.

  • ChaRM: Partner function types

    Hi!
    I would like to set up ChaRM with Service Desk in Solman. One of the prerequisite is to create business partners.
    The questions:
    which partner function will be used within ChaRM?
    which partner function types will be used within ChaRM?
    what is the assignement of ChaRM-role (requester, tester) to partner function  type/partner function?
    Should the transactions/tables such  "CRMC_PARTNER_FCT", "CRMC_PARTNER_PFT"  be customized?
    Thank you very much!
    regards
    Thom

    Hi,
    You need to define partner and then partner determination procedure. Then assign it to transaction type SDCR.Partner function are such as creator,developer,change manager,developer,tester,change advisory board etc.
    Inspire by rewarding for more details.
    Regards,
    Nikhil

  • Trading partner functionality

    Hi Gurus,
    Can you tell me about how the trading partner functionality in customer and vendor master is used.
    How is this  useful  for inter company balance reconciliations
    Regards,

    Hi,
    Trading partner is any entity with which the organization does any kind of business transaction.
    Business partners are used  to define the rights and responsibilities of each business partner in a business transaction. You assign partner functions when you create a master record for a business partner.
    Features
    The following are examples of trading partner functions(as customers)  that are defined in the standard system:
    ●     Partner functions for partner type customer
    ○     Sold-to Party
    Contains data on sales, such as the assignment to a sales office or a valid price list
    ○     Ship-to Party
    Contains data for shipping, such as unloading point and goods receiving hours
    ○     Bill-to Party
    Contains the address and data on document printing and electronic communication
    ○     Payer
    Contains data on billing schedules and bank details
    ●     Partner functions for partner type vendor
    ○     Ordering address
    ○     Invoice presented by
    ○     Goods supplier
    ○     Alternative payee
    ●     Partner functions for other partner types, for example, personnel (HR master records)
    Customer partner functions
    The company or person who places an order can be the same company or person who receives the goods and the invoice and pays. Because this customer assumes all partner functions, you create one master record for the customer. You create a customer master record for the sold-to party in which you enter data required for the other partner functions.
    A subsidiary office can place an order and its head office can pay the invoice. In this case, you divide partner functions among the different offices. You need a corresponding number of customer master records. In one master record you enter, for example, the address of the sold-to party for correspondence, in the other, the address of the ship-to party for delivery. You establish a link between the partner functions in the customer master record of the sold-to party by entering the customer number of the respective partner functions.
    Prerequisites
    When creating master records, you define the partner functions for business partners by assigning an account group. For partner types customer and vendor, you define which account group can be used for which partner function. You do this in Customizing in the following activities:
    ●     Customer
    In Customizing for Basic Functions (SD) in the activity Assign partner functions on the debit side to account groups.
    ●     Vendor
    In Customizing for Purchasing (MM) in the activity Define permissible partner roles per account group.
    The partner determination procedure specifies the partner functions that are allowed or mandatory for processing a particular business transaction, such as a sales or purchase order.
    Analogous is business partner from vendor point of view.
    Hope this helps.
    Rgds
    manish

  • You cannot maintain the address (partner function 'Ship-to party' is empty)

    Dear Experts,
          I create one outbound delivery but when I click on address ( Symbol next to ship to party) it is showing below error.
    You cannot maintain the address (partner function 'Ship-to party' is empty)
    Message no. VPD017
    I also check customer master , address is maintain properly.
    in partner functions Sold-to party , Bill-to party , Payer , Ship-to party all are same. ( example: if bill to party is ABC then payer , ship to pary , bill to party all are ABC).
    Please help.
    Regards,
    Nirav Desai

    Hii Nirav Desai,
    You do correctly "configure automatic partner determination". The steps are as below -
    Customer Master
    Sales Document Header
    Sales Document Item
    Delivery Type
    Shipment Type
    Billing Header
    Billing item
    Sales Activities
    1.     How to define partner?
    A grouping of partner functions. The procedure specifies which partner functions are allowed for a particular business transaction (for example, for processing a sales order) and which of those partner functions are mandatory.
    Use
    You define partner determination procedures in SD Customizing through Functions -> Partner determinat.
    u2022     In sales documents, for example, you can specify the partner determination procedure according to sales document type and item category. During order entry, the system first proposes partners from the customer master record of the sold-to party. If this information does not exist in the customer master, the system automatically proposes the mandatory partners from the partner determination procedure that you specify in the document header.
    u2022     For billing documents, for example, you can specify a partner determination procedure where the sold-to party, bill-to party, and payer are mandatory but the ship-to party is not (for billing, you are more interested in who orders and pays for the goods than in who receives them).
    Thanks and Regards,
    Santanu

  • Partner function for ChaRM approach in Solman 7.0

    Hi!
    I would like to set up ChaRM with Service Desk in Solman. One of the prerequisite is to create business partners.
    The questions:
    which partner function will be used within ChaRM?
    which partner function types will be used within ChaRM?
    what is the assignement of ChaRM-role (requester, tester) to partner function type/partner function?
    Should the transactions/tables such "CRMC_PARTNER_FCT", "CRMC_PARTNER_PFT" be customized?
    Thank you very much!
    regards
    Thom

    Thom Heinemann wrote:>
    > which partner function will be used within ChaRM?
    Anand: The partners funtions used depends on which partner determinations is assigned to the CHARM transaction type ( standard for CHARM transaction type is SDCR and the standard partner determination procedure is SDCR0001 ) and so all the partner funtions assigned to the above partner determination procedure will be used in CHARM.....
    So can also create you own partner functions and assign it the some partner determinations procedure and then finally assign that partner determination procedure to the relevant transation type....
    Make sure that you dont change any standard partner determination procedure, just make a copy of it and then include the partner functions u desire in that Z partner determination procedure....and then assign this partner determintion proc to trans type SDCR..
    > which partner function types will be used within ChaRM?
    Anand: This depends on the partner determination procedure assigned to the transaction type for CHARM (SDCR)..
    All the partner function included in that partner determination proc will be used....
    > what is the assignement of ChaRM-role (requester, tester) to partner function type/partner function?
    Anand: Refer SPRO path Solman-> Scenario specific settings->Service desk->Partner determination Proc-> Define partner funtions.. Just go thru it and scroll down to find out SDCR0001, SDCR0002 and so on...
    Basically CHARM role is mapped with this partner function types mentioned as above ...
    > Should the transactions/tables such "CRMC_PARTNER_FCT", "CRMC_PARTNER_PFT" be customized?
    Basically the SPRO path mentioned above refer the same tables......They can be customized....only if the requirements demands....
    Inspire ppl by rewarding !!
    Regards,
    Anand

  • How can the system automatically assign lead(Sales Prospect) to sales manager which is one of the partner function

    How can the system automatically assign lead(Sales Prospect) to sales manager which is one of the partner function ?

    Hi Deep,
    you can go through below links if you have not gone through already.
    Lead Distribution - Lead Management - SAP Library
    How to Distribute Leads Automatically to Partners in SAP CRM?
    Rgds
    Hari

  • Automatic assignment of Partner Function (Dealer) based on Postal Code?

    Hi Experts,
    We are realizing a project in the Bathroom-Product Industry. Responsible for the service to the end-clients are authorized dealer. When creating a service ticket the responsible dealer has to be assigned automatically to the ticket on the basis of the postal code where the IBase (the product) is installed.
    The process is:
    1. The client is calling the Interaction Centre and first the IC Agent has to identify the account and the Installed Base (The     installed base contains the postal code where the product of the client is installed) of this account.
    2. An Interaction Record is created to record this inbound call.
    3. Afterwards a Service Ticket is created as a follow-up Document of the Interaction Record. In the moment of the creation of the Service Ticket the correct dealer has to be assigned automatically to the Service Ticket (as a Partner Function not as a Service Organization) on the basis of the postal code of the installed base.
    I have the following question! Which are the steps to assign automatically a Business Partner Function to a Service Ticket? We also need to create a Z-Table with the postal codes for which every dealer is responsible.
    Example:
    Dealer 1 is responsible for the postal codes: 08040 - 08045 and 08056 - 08059. If a client is calling and his product (Installed Base) is installed in Postal Code 08042 or 08054 the dealer 1 has to be assigned to the service ticket.
    I hope I could make myself clear ;-)? Anybody can give me a hint how to do that? What are the basic steps?

    Slightly similiar, originally being an R/3 customer before implementing CRM our dealer equated to sales office.
    In the CRM Org model (PPOMA_CRM) in the attributes of the sales office we entered the Regions & Postal codes for that dealer (pain in the arse to do) and in CRM the sales office in the org creates a BP.
    We used a org rule for the IR record based on country, region, postal code to determine the appropriate sales org, DC, div, and sales office based onthe zip code.  We created a custom partner function to represent the partner number of the  BP from the org model.  Then we configured a custom relationship "ZORG" "Is partner of sales office" and went into the BP master and assigned the actual dealer number as a partner to BP from the org model that = sales office.  From that we configured a custom access sequence to pull the actual dealer number from the org model office relationships.
    We looked at territory management, but our dealer is an "org BP" and territory management appeared to want to drive to a person BP number.

  • I can not see all "Divisions" in BP Rel.--Partner Function Assignment

    Hi,
    When I edit "Partner Function Assignment" in BP reliationship such like BUR011("Employee Responsible"),
    I can not see all "Divisions" in list which I can see in configuration via SPRO-->Customer Relationship Management->Master Data->Orgnizational Management->Division Setting->Define Divisions.
    E.g., in configuration, I can see 7 records of divisions from "001" to "007", but in "Partner Function Assignment" of BP relationship, I can only see "002" to "004".
    Do you know why? Thanks a lot!
    Best regards,
    Long

    hi
    that should not be happening,if they are visible in one client then should be there in another too
    do one things try run  this
    hrbc1_atributes_buffer_update
    it will refresh the buffers of your org structure and then you may be able to add this
    also check the check box where it is mentioned that"object determination should be permitted"
    remember it will run only for once after you run this the check box will be unchecked again
    i guess it may solve your probs
    also try to structure your org structure index
    use t code
    crmd_index_om
    and withtin the object type give O
    and execute
    best regards
    ashish

  • Can we view  SH's partner functions in Sales Order?

    Hi All,
    SP has a different SH and FA is assigned to SH in master record. When we create order we can see all the partner functions of SP but we can't see partner functions of SH. User wants to see which FA is assigned to SH. We can only view partner functions of SH in delivery document. Is it possible to view partner functions of SH in sales order as well? Please suggest the ways to configure this setting.
    Thanks!!

    Hi,
    Yes, you can view . Check the Partner determination procedure, include the partner function SH to your partner determination procedure assigned for your sales order.
    Regards,
    Murali

  • Partner functionality in release order

    Dear Gurus,
    I have created a contract with partner functionality.
    I created a Purchase Requisition referring contract (Using source of supply). I need to create Po in ME21N by adopting PR. System copies all the other details but not partner details. I need to enter partner details manually in PO.
    But  When I create a PO in ME21N by adopting the same contract, partner details are automatically copied from contract.
    Please suggest me what should I do If my PO should copy partner details of contract (while creating PO adopting PR)
    Regards,
    Sastry

    i hope , if u have created the vendor master , then PO will take all details of partner form vnedor master .
    SO check the which details u are updating manually, the same as its maintained in master data or not.
    IF not maintain it in vendor master .
    Thansk
    SAP-MM

  • PO and partner functions of a contract

    Hello,
    We have the following problem:
       In our system, we maintain partner functions in the partner functions of the vendor.
    And for this vendor we have a contract. However, we don't maintain partner functions in the contract.
    But when we create a PO for the vendor and the contract, the system looks for partner function in the contract and doesn't look any more for the partner functions in the vendor. but, as we have no partner functions in the contract....partner functions in PO are empty.
    I can't find customizing point to indicate that we don't want to look partners functions in contract. Is it possible?
    Thanks,

    the data is always taken from the most specific source, which is the contract in your case. it is not possible to use contracts and omit at the same time the partners (or not available partners) from the contract.

Maybe you are looking for