MWST --Maintaining Access sequence -- UK tax Config

Could some body assist me in here. I configured the input and out VAT tax codes for UK (Tax procedure TAXGB). However when i post an invoice  it throws an errors saying"Acess sequence not maintained". I then tried  to configure the access sequence (MWST (access code10 table 3). It would not allow me to create the access code 10, saying that"Choose the key from the allowed name space".I dont understand what this name space is nor do I know where to look for the "allowed name space".
If anybody throw some light what should be my next step, that would be helpful and I will reward points
Thanks
sapsri

Hi,
When you went to T Code (OBYZ) (SPRO -> IMG -> Financial Accounting -> Financial Accounting Global Settings -> Tax on Sales/Purchases -> Check Calculation Procedure) and selected activity 'Access Sequences', did you find MWST or not?  This is standard - when you highlight MWST line and double-click on Accesses, you should see access number 10 / condition table 3 there, you do not need to create them.  I am surprised how it is missing in your system which warranted you to CREATE it.  Obviously, when you try to create standard things like this which are missing (for some strange reason) in your system, system will throw the error that you cannot define things in its reserved namespace.

Similar Messages

  • Error with Material type/Tax code access sequence in Tax procedure

    Hi,
    I am trying to create an access sequence with Material type/tax code combination for my tax procedure. While I can generate the condition table successfully, I cannot create an access sequence. The access sequence gives me the pop up message " select a document field for MTART". I searched in the field catalog and its absent. However MTART exists in the table KOMG.
    How can I include the field MTART ( material type) in the field catalog. The tax code field is shown as green. Please help.
    Thanks and regards,
    Soumya.

    The field MTART was included as standard in the table . I didn't have to add anything. Further, i couldn't find any standard access sequence for tax procedures that include material type.
    I am really stuck with this!!
    Regards,
    Soumya

  • New Access Sequence for Tax based on material Group

    Hello All,
    Our requirement is that we tax our employees on apparel only if the value is greater than $50.00.
    To achieve this, we created a new tax condition table (953 which is copied from 053) and assigned it to access 09 in the access sequence ZTX1 (created w/ref from TAXJ). We added material group (MATKL) to the condition table and selected exclusion indicator for the access.
    We created the condition record in FV11.
    When we created the sales order, the new access sequence (09) is not being accessed. It gives a message "Access not made (initialized field)" Message 102(VE).
    Please advise if we are missing something.
    Thanks,
    Leela

    Hi Leela,
    Are you creating sales order in the same system like
    You have created table in Development system in same system your are creating sales order
    If you are creating here you just go to V/07 transaction then slect your access sequence go in to the tables detail screen here you select your table 953 then click on fields here you check all the fields are available correctly or not then save the changes.
    Now try
    or
    You transported these confugaration to other system like Quality or Production here and you are creating the sales order,
    If you are creating here you need to create condition table again then try.
    I hope it will help you,
    Regards,
    Murali.

  • Access Sequence Precedence

    Hello All
    Currently our access sequence MWST has one key with below values
    10   3   Tax Classification
    I have added a new key with below values
    5   935     Dest Country/Region/TaxCl1Cust/TaxCl.Mat
    In the pricing procedure of a sales item I still see my original Access key and not my new key I have added. How to let the system know that it should first pickup my sequence and not the original? How is it determined ?
    I appreciate your response.
    Thanks
    Venkat

    Dear,
           I think you have not maintain access sequence in Condition Type.
           Please go via this link. It will help you,
          SPRO ---> Basic Functions  ---> Pricing ---> Pricing Control ---> Define Condition Types ---> Maintain Condition Type ---> Select your pricing condition and go in details -
    > Maintain Access Seq. Tab with which you create as new pricing condition.
    Regards,
    Sandip

  • Regarding access sequence

    hi Gurus,
    I am working on TAXINN. I have a error in access sequence. i have created acesss sequence JEXC in which i maintained standard table 40 for country,region,customer classification, and material classification.But at the time of creating condition record in VK11 and VK19 I am facing error "*access sequence can not find the fields "* in pop and exits from the transaction.
    i have maintained access sequence in conition type in both V/06 and OBQ1 And also maintained the fields in OVK3 And OVK4.
    Kindly guide me where i am going wrong for access sequence.
    Regards
    Hemant

    Dear Hemant
    Go to V/07, select the condition type JEXC and execute.  There block the table 40 and double click on "Fields.
    Now check whether you have maintained the following
    Condition:::DocmtStru:::::Doc.field::::Long field label
    ALAND:::::::::KOMK::::::::::ALAND:::::::::::Country
    REGIO:::::::::KOMK::::::::::REGIO:::::::::::Region
    TAXK1:::::::::KOMK::::::::::TAXK1:::::::::::TaxClass1-Cust.
    TAXM1:::::::::KOMP::::::::::TAXM1:::::::::::Tax class. material
    Also please note that all excise / tax condition types for TAXINN should be maintained in VK19 where you have to input TX for the field "Application"
    thanks
    G. Lakshmipathi

  • Why self-defined access sequences of free goods can not work?

    Hi gurus,
    I have maintained access sequences of free goods self-defined.but when i creat the SO it does not work!
    when i used the standard access sequences ,it is OK .
    Can anybody tell me why?
    thanks in advance

    Dear Sandy,
    Go to V/N1 transaction select your self defined access sequence then go in to the accesses and fields and check all fields are activated.
    Make sure that these fields are flowing in your sales order.
    I hope this will help you,
    Regards,
    Murali.

  • Problem Downloading Source Structure for a Access Sequence for Pricing

    Hi,
       We are using SAP CRM and ERP version 5.0.
    We have maintained Pricing Procedure in SAP ERP and the Same has been downloaded in SAP CRM and is been used in Sales Order dor Pricing Determination.
    We have maintained Access Sequence ZKP0 and has Accesses as
    1.Site Price <Table SAP071>
    2.Price List Price <Table SAP155>
    3.Sales Org Price <Table SAP073>
    Now when we checked for the Accesses for theTable SAP155 in the Option in the Field for
    Price List the Structure Entry is Missing and it should have been "CRMT_ACS_H_SEL"
    Now the Same is Present in ERP and i want it in CRM so i Tried Downloading the Condition Types for the Pricing via Filter "DNL_CUST_CONDALL" but still the Entry has not populated in the Feild.
    Pricing Detrmination via Site Price is happening in ERP whereas in CRM it says Record not Found .
    The Entry for the Price Lsit has been succesfully Downloaded in the Price List Table but still due the absence of the Structure is doesnot appear in CRM
    Please Suggest some Fruitfull way to Resolve this issue...
    Thanks and Regards,
    RK.

    Hi RK,
    Pelase retrigger the initial download of DNL_CUST_CNDALL object alone using R3AS. This will create all the structures necessary.
    Also after the download of this object is complete(This object will bring all the customizing in one shot i.e all cond tables,accesses etc), you can check in SLG1 transaction for any errors for this initial download.
    Then if you have defined some Z fileds please do the mapping according to the note 514952.
    Regards,
    Abishek

  • Service Tax Condition record - Table-3 and access sequence MWST

    Dear All,
    For maintaining the service tax conditon record , it is required to have the condition record to maintain under Tax classification table, which is available in access sequence MWST or we can add this condition table( table no :3) in any other access sequence and that access sequence needs to be assigned in Service tax condition type i.e JSRT, becasue system will check the rates from the table A003 while doing the service tax transfer from intermediate account to service tax account in report RFUMSV50.
    But the issue in there is NO validity period defined in the condition table : 3 , which signifies that we can not maintain the service tax condition record along with the validity period.
    Is there any way , we can add validity period field in Tax classification table.
    and how can we see the maintainace of Taxes table , is there any T.code avaiable for the same, as I could't find the same.\
    Please suggest.
    Thanks & Regards
    Nitin

    Hi Nitin,
    SD can give validity period for a tax code either for an individual customer or for all the customers through their pricing conditions.
    Aravind

  • Access sequency for Input Service Tax Condition

    Dear All,
    I am running the deferred tax transfer programme in ECC 6.0 but I am facing some problem with the Service Tax Conditions. Now existing we have configured for all input service tax conditions access sequence JTAX.
    If I use the MWST instead of JTAX...system does not calculate the Service Tax it gives error.So please provide me any solution or option for this....
    Regards,
    Sandeep

    Hi
    Maintain the Condition Record % at Tax code: FTXP
    Regards
    Prasanna R

  • Update condition table A846 belonging to the MWST access sequence

    Hi.
    I´m working with CRM 3.0, and we had a TAX change in R/3, now when we try to update de table A846 (R/3 table) in crm, with Tx r3as the table clears all records and don´t write the new records! this table concerns to a access sequence for condition MWST.
    I think the problem could be in the zdnl_cond_a846 filters, but I don´t know wich were the original filters.
    Thanks

    Hi,
      Did you downloaded DNL_CUST_CND, DNL_CUST_FGD, DNL_CUST_PRC?
      After downloading DNL_CUST_TAX  verify your tax load in CRM using report CRM_TAX_CUST_VALIDATE.
    If you have any issues in Tax Settings in CRM, tax related data will not be loaded into CRM.
    Regards,
    Bhanu

  • Tax condition table for an access sequence

    Hi,
    I serched in the forums to find t.code or menu path for creating a tax condition table for MWST tax condition type, but no body has given any specific answer.  most of them have given the SD or MM related condition tables.
    My requirement is, I want to create a key combination for "MWST" TAX condition type.  Please let me know the process of creating the key combination for TAX condition type. 
    Thanks in advance.
    Anil

    Hi
    MWST is the standard progarm access sequence
    condition type  is base to calculation of main the tax procedure
    but the thing the access sequence and conition type are pure MM, SD Work,
    if you need to table :
    T685,T685A,T685T,
    are else you use Z table with the help of technical consultants'
    Thanks
    Madhu

  • Migração: Tax Group in Access Sequences

    Boa Tarde experts!
    Algum de vocês já passou por um problema parecido?
    - Criei um novo Tax Group de MM para PIS e COFINS somente
    - Associei as Conditions Tables corretas para o Tax Group
    Quando vou fazer a migração desse Tax Group nas sequencias de acesso, obtenho o seguinte erro: "Access Sequence , application TX does not exist" (ICC_CONDTAX014).
    Verifiquei a tabela T682 e vi que existe uma entrada na aplicação V com a access sequence branca. Porém, se eu entro na configuração das sequencias de acesso (tanto de SD quanto de MM via J1BTAX) não encontro nenhum registro branco.
    Alguém tem alguma dica de como proceder ou já teve algum problema parecido?
    Fico no aguardo!
    Muito Obrigada!
    Luciana

    Boa tarde Luciana
    Eu estou com o mesmo problema, como você conseguiu fazer a correção ?
      Obrigado
          Luciano Storti

  • Access Sequence for Plant/Tax code Combination  for JTAX

    Dear All
    i want to create a new access sequence for "Plant/Tax code" Combination.
    Please let me know the process for the same
    Regards
    Amey

    Hi,
    Goto- M/05.
    Create the condition table by selecting the fields Plant & Tax code.
    Assign this condition table in the Access sequence JTAX as per ur requirement.
    Create condition records (FV11) by choosing the requirec access sequence.
    Regards,
    Satpal

  • How to maintain code of 'requirement' of access sequences in SD pricing???

    Hi everyone,
    I have an assignment to maintain the code of 'requirement' of access sequence in SD pricing procedure...
    and I know that the 'requirements' are  pieces of code attached to an access sequence to determine whether or not a certain
    access level should be executed.
    And we can display the codes of SAP predefined 'requirements' with the TCODE VOFM,
    but when i try to enter new requirement number , it just terminated with a ERROR msg: u r not allow to maintain SAP standard requirement...blabla... So i am confused how to do this
    please help me, thanks...
    Richard

    Hello,
    This is due to requirement numbering...
    1 - 899 numbering reserve for SAP standard to be used...
    900 -> onwards are for customer specific enhancement
    Please try to use this...
    Thanks.

  • Which Access sequence will use for sales tax condition type for TAXINN

    hi.,
    which Access sequence will use for sales tax condition type for TAXINN procedure.pls give one example (Access sequence) and give fields.
    Because i couldnot create the condition record,the system not accepted for tax indicator.
    Regards.,
    lakshmanan

    We also got the same problem with our client and escalated it to SAP.
    they advised to use the access sequence <b>JIND</b> which consists of condition tables in the order given below
    <b><u><i>Step    Condn Table</i></u> 
    10            354
    20            355
    30            40</b>
    Attach this to your condition types.
    Rewards if it helps.
    Regards,
    Anbu

Maybe you are looking for

  • How Do I stop Calendar from Updating a Subscribed Calendar?

    I have a calendar that I do not want updated.  I am subscribed to it, have it stored in iCloud, and have set auto-refresh to 'No'.  However it continues to update itself at least once a day.  How do I stop that?  And what, exactly, does the auto-refr

  • Speakers to Apple TV 2nd generation

    I would like to get an Apple TV this week. I was wondering if anyone knew if I can plug-in external speakers directly to the Apple TV? If so can it be any speakers with a 3.5mm jack? If not can you please let me know what speakers would work? Thank y

  • Homesite 5.0-5.5 and Customer Service sucks balls!!!

    It is obvious that Adobe does not look through their own Forum Message board crap, as they requested for me to go for support. If so, they would have answers to the questions that I would need; in which I see ppl having the same problem as I do back

  • To read EXNUM field while MIGO

    Dear All, I need to read the EXNUM field value (for excisable material) while doing MIGO. I am unable to find the related structure that contains this value. IS_GOHEAD-exnum is always blank. Where and when does this field get populated? Any pointers

  • Best way to export a 720p project to a 1080 file for film festival

    I have a 4 year long project, in FCP7, with a 720/24 timeline. Most footage was shot 720, though some later was shot 1080... the film is complete, and now has been accepted into film festivals. (YAY!) Now I need to create a 1080/24 Pro Res file for a