MX 920 Printer Not Responding - One Solution That Worked For Me

I phoned Canon customer support and they walked me through fixing my problem.  We use wireless LAN at the house.
Background:
I have a mac, my wife an iPad.  We would be able to print a document, then after aprx 10 minutes I'd have to enter our router password again.  Our home office was not so printer friendly.  Our printer was located in an adjacent room aprx 25ft away.
Solution to OUR Problem:
Well, I finally phoned Canon Customer service and she ran me through a function test that printed out a report to check the signal strength from our router to the printer.  Well, our signal strength was at 84%.  
Here is the process they walked me through in order to see my signal strength and confirm my settings.
Click "Menu" , then click "Set Up" (the tool icon), then click "Device Settings", then click "LAN Settings", then click "Confirm LAN settings", then click "Print LAN settings"...then click "Yes" to Print Network Configuration Page
On that page verify:
1. that you have a IPv6 IP Address & Default Gateway (dont ask me how or what that all means...she just advised me that I should make sure that there is one in there...if there was not one in there then there was something wrong with my router or my actual connection/password)..
2. Signal Strength
She advised that it should be as close to 100% as possible..  Again, ours was at 84% and she said, "yup, thats your problem"..
Solution Day 5
The printer has been working flawlessly.  I can print something out in the morning, go to the gym, come back an couple of hours later and I can print again...Before, I would have to re enter our router LAN password.
Hope this help some of you out...  

Base Station Firmware: 7.2
Airport Utility: 5.2.1
Wireless Radio: 802.11n only (5.0 GHz)
Channel: Automatic
Wireless Security: WPA2 Personal
Under 'Disks' File Sharing is enabled with a disk password (as opposed to accounts or base station passwords). Guest Access is not allowed. The rest are the defaults.
Now I've been having interesting problems with USB external drives mounting on my iMac. One never did (but was always successful with FireWire) and a second one was inconsistent. The drive that I have attached to the AEBS at the moment is one that I finally made fully functional with my desktop so I don't know if that is related. I'm going to have to run a number of additional tests.
Note: my wireless is pure .n - not a mixed environment. I also had a speed issues with the iMac (wired ethernet) until I changed it from manual (100BaseT, full duplex for use with my old Belkin) to Automatic and re-enabled IPv6 which is enabled on the AEBS.

Similar Messages

  • Slow Airport disk - one solution that worked for me

    I reformated my USB disk to "Mac OS Extended" format.
    Do not use "Mac OS Extende Journaled"
    Now I have at least 1 MB/s transfer rate. Before I had just a couple of KB/s

    Base Station Firmware: 7.2
    Airport Utility: 5.2.1
    Wireless Radio: 802.11n only (5.0 GHz)
    Channel: Automatic
    Wireless Security: WPA2 Personal
    Under 'Disks' File Sharing is enabled with a disk password (as opposed to accounts or base station passwords). Guest Access is not allowed. The rest are the defaults.
    Now I've been having interesting problems with USB external drives mounting on my iMac. One never did (but was always successful with FireWire) and a second one was inconsistent. The drive that I have attached to the AEBS at the moment is one that I finally made fully functional with my desktop so I don't know if that is related. I'm going to have to run a number of additional tests.
    Note: my wireless is pure .n - not a mixed environment. I also had a speed issues with the iMac (wired ethernet) until I changed it from manual (100BaseT, full duplex for use with my old Belkin) to Automatic and re-enabled IPv6 which is enabled on the AEBS.

  • KT6 Delta Rebooting Issues - Solution that Worked for me

    Hi
    Solution that worked for me: Enabled SATA Controller which takes a while for it to detect SATA Drive and giving time for the system to warm up.  I don't get that annoying message asking to restart Windows in safe mode, normal, & etc.  
    I've been having this rebooting problem lately. I tried everything from BIOS settings, checking drivers for problems, checking Windows XP, Power Supply, Checking Motherboard,and etc. I installed a fresh copy of Windows but still had that rebooting problem. When I got this MB 3 months ago, it was working perfectly and had no rebooting problmes. But its now fall in my place and the temp a bit cold.
    I read about the temperature issue (20C). I disbaled the SATA controller because i don't have a SATA Drive.  
    Hope this will help others as well and for MSI to Fix the Problem.
    Barton 2500+
    Ati Radeon 9000 Pro
    Maxtor DiamondPlus9 80 gig
    Western Digital WBC 120 gig
    LiteON 52x24x52
    360W PS

    No, i`m sure that trick it`s not working for me and for rest of us.
    I did try all trick in the bios, and...

  • Thinkpad yoga - limited connection - intel 7260AC (with solution that worked for me)

    limited connection issue
    i'm new to the forum, sorry for bad english
    i've a brand new rhinkpad yoga, with win 8.1 and intel ac 7260 wifi card
    first of all the solution that worked for me is moving from WEP to WPA2 protection with the router
    the problem was that i wasn't able to connect to internet using wifi
    i got "limited connection" and i wasn't able to access internet at all
    windows validated the connection and obtained an ip, but it wasn't then unable to access internet at all, i also wasn't able to access or ping the router.
    i also got an error stating the lack of the default gateway, but this one seems to be resolved by windows check and repair procedures
    my router had wep protection, and i used it with no issues with 2 android smartphones, an android tablet, a mac and a linux system, and in the past with windows 7 and vista systems.
    i've searched for solution all the night and checked everything
    - system and driver update (via usb thetering)
    - various command to reset network configuration
    - unchecking selected check box in energy saving tab inside wireless property panel
    but the only one solution that worked was the move from WEP to WPA2
    hope this helps
    my first post, be patient...

    From what I gathered, about the Y2P Limited Wifi issue, this problem is solved by configurating a router to meet the computer needs. Once done, to fully implement this fix, it is adviced  that you carry this configured router and use it every where you go, like a power cord. When you go to Statbuck in the monrining, be sure they hook up your router and return it when you leave. Alternitively, this can be done at other venues like the airport, hotel, school, work, etc. 
    I really don't know why people keep wasteing their time. Lenovo has chimed in and said this is a router issue. That said, the aformentioned advice is a formulated fix.  Shall we put an end to thiese topics and get the forum moving again past the wifi issues? Like said many times, this issue has been fixed using the above reccomendation.

  • Premiere elements12 will not accept ADOBE ID that worked for photoshop elements 12, help

    premiere elements will not accept ADOBE ID that worked for photoshop elemets 12

    katmama
    From one of your prior threads, you appear to be working in Windows 8.1 64 bit with your Premiere Elements 12.
    Where are you when you say that Premiere Elements 12 will not accept your Adobe ID - are you at the Sign In dialog step of the end of the
    installation? Whatever the location, what is being rejected or not recognized specifically - can you tell if it is the Adobe ID or password?
    Are you working with antivirus and firewall(s) disabled?
    Please check out the following troubleshooting steps and let us know if any of them worked for you
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
    Do you have more than one Adobe ID with Password Account?
    We will be watching for further developments and will have more comments based on your reply.
    Thank you.
    ATR

  • How to show one prompt that works for both Graph and Table views?

    Have an analysis with a graph and a table. The information in the table and graph are different so cannot use a pivot table w/graph.
    Each view has a view prompt for Year and Month (tried both separately and also as one combined column ‘201001’) so user can easily change months.
    Too much data to use the slider because it will not graph.
    Page prompt does not allow user to switch dates easily.
    Since this will be a link from a dashboard, do not think making this a dashboard from a dashboard would be good so not a dashboard prompt.
    Saw something about Master Detail linking, but does not appear to work with graph prompts.
    How would the analysis be configured to show one prompt that works for both the Table and the Graph?
    One prompt would change both the table and the graph.

    Master Detail Linking almost works.
    Table view can show all the results without error.
    Graph view needs to be limited or errs with "Exceeded configured maximum number of allowed input records."
    Is there a way to set the initial Master Detail Linking value to the top sorted value?

  • Airtunes audio drop out solution that worked for me! :)

    setup is DSL modem, AEBS main base station (software v5.6), AE (software v6.2), AE is in WDS mode as a remote base station. I am running OSX 10.4.3, and all software (itunes, etc) is updated current as of 6Nov2005.
    using airport admin utility, i set both base stations to "g only" and still had audio drop outs. Then I left both of them on g only and set both of them on channel 5, (was on channel 10 before.) no airtunes drop outs!!
    I have been audio drop-out free for a few days now and am cautiously optimistic- enough to post my solution. hope it works for you, too!

    Thanks Bryan! Glad to hear you found a solution that works for you. Your suggestions are also among the many solutions previously posted in the mother of all discussions on this topic found at:
    Muhannad Al-Khurafi, "Audio Drop while using airtunes", 10:38pm Jul 21, 2004 CDT

  • PDF Printing without BI  - a solution that works

    I have used the instruction givein in the follwing post:
    http://carlback.blogspot.com/2007/03/apex-cocoon-pdf-and-more.html
    Below are my steps
    1.) Install java sdk
    2.) Create environment variable JAVA_HOME that points to this dir. : JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20
    3.) Extract c:\zipfiles\apache-tomcat-6.0.29-windows-x64.zip to the directory where the program will be executed.(D:\ApexPDFPrintserver)
    4.) Do the same with cocoon-2.1.11-src.zip and fop_post.zip.
    5.) Open a CMD and go to that directory.
    6.) Check if the java home is set: (set J should show all environment variables starting with J)
    7.) Change directory to the cocoon installation: (D:\ApexPDFPrintserver\cocoon-2.1.11)
    8.) Compile the cocoon app by typing the following : D:\ApexPDFPrintserver\cocoon-2.1.11\build war
    9.) Copy the cocoon.war file from D:\ApexPDFPrintserver\cocoon-2.1.11\build\cocoon to the appache web apps directory => D:\ApexPDFPrintserver\apache-tomcat-6.0.29\webapps
    10.) Edit the server.xml (D:\ApexPDFPrintserver\apache-tomcat-6.0.29\conf) file to change the port on which the server would be available to:8085 (8080 is used by APEX) on this installation
    11.) change dir to D:\ApexPDFPrintserver\apache-tomcat-6.0.29\bin and enter startup
    12.) Apache will now create a cocoon webapp.
    13.) Copy the fop_post dir to D:\ApexPDFPrintserver\apache-tomcat-6.0.29\webapps\cocoon.
    14.) You can now test you Tomcat installation: http://localhost:8085/
    15.) And the cocoon installation.: http://localhost:8085/cocoon/.
    14.) Configure the APEX installation to use this printserver. http://localhost:8080/apex/apex_admin.
    15.) The settings can be found at manage Instance => Instance settings = > Select the report printing tab.
    16.) Print server: Standard
    17.) Print server protocol: HTTP
    18.) Printserver host address: this machine's IP
    19.) Print server port :8085
    20.) Print serverScript: /cocoon/fop_post/
    21.) Happy printing!!
    Remember to give the parsing user right to access the network.
    I have used the same script provided with the APEX installation to give the APEX_0400 user rights to the network.
    Have fun
    JJB

    mgangav wrote:
    insanemal wrote:
    change to lanuching gdm from your inittab using run-level 5
    or remove agetty from tty2
    both will resolve the issue.
    Actually, how will running gdm from inittab help with this issue?
    And I didn't understand what you meant by "remove agetty from tty2"
    You know, I am pretty sure that the issue has to be with xorg. I was having this issue a lot a month ago, but then, a certain upgrade of xorg fixed the issue. I was fine for a few weeks. My computer never crashed. But, unfortunatly, a package in that same upgrade was broken and I ended up upgrading the system again a few weeks ago. xorg also upgraded at the same time. Now, my computer keeps crashing randomly and in random ways.
    I think that the best thing to do is to keep up with the xorg updates, find one that works for your system and have pacman ignore all upgrades to xorg after that.
    Actually, if anyone can tell me how to downgrade xorg to its state 3 weeks ago, it would be absolutely awesome.
    Thanks
    Because if you use runlevel 5 you dont have agetty on TTY2 so it won't try and kill xorg all the bloody time
    The problem is caused because GDM is starting so fast the XORG server it loads up checks for free VT's and finds TTY2 is empty and starts on it. THEN your inittab fires up agetty on TTY2.. which promptly causes hell to arrive in a handbag.
    You really need to be less critical of people offering you advice.. and possibly even check what they have posted in the past.. like the threads from months ago dealing with this issue. (search is great you know)

  • IPod classic error 50, 53, 69, etc solution that worked for me

    Giving back to the community that I spent so long searching in for a solution to this problem--even though I ended up with my own solution that may or may not work for you.
    I bought a 6th gen 160GB iPod classic and tried to sync it to my massive 14,000(+)-song library. The sucker would give me all sorts of errors (50, 53, 69) and never complete my sync. It said my files were corrupted or that an unknown error occurred yada yada. I looked on the forums for a solution and none of them worked. I sent that iPod back and got a 7th gen 160GB instead. SAME ISSUE. MY GOD. My only guess was that since both iPods came from a Mac computer there was some issue with it connecting to Windows--ever after reformatting it.
    So, I knew about formatting my iPod and then restoring it to try and resolve the issue that turingtest2 often would point out in many threads similar to this: iPod Classic
    What I never did was a full format. But more specifically, I never did a full format and waited for it to finish.
    The fix that worked for me was this (and I'm giving my exact order, even if the steps were unnecessary--as the fact that it worked was like a dream come true):
    1) Go to My Computer, right click on Computer in the sidebar and click on Manage.
    2) After the window pops up, click on Device Manager and then Universal Serial Bus Controllers.
    3) Make sure your iPod is plugged in, and right click Apple Mobile Device USB Driver and uninstall it.
    4) Now go to Disk Management in the sidebar. Right click on the iPod and select Format
    5) For format options, select file system as NTFS (I know, I know--but it worked for me), and UNCHECK Quick Format.
    6) Format it, and WAIT for it to finish. It will take a really long time.
    7) After formatting, plug the iPod back in and wait for the driver to install. Open iTunes and restore the iPod.
    8) Wait for the iPod to restore and then sync the music!
    If everything was done correctly it should work, possibly.
    My hard drive specs before this were:
    Retracts: 34
    Reallocs: 9344
    Pending Sectors: 0
    So, the specs were pretty bad, but it still worked for me.
    I actually just got done doing another sync and it still seems to be working fine.
    Good luck!

    I have had success with this method also, but it is not full-proof. Try the movie "The Incredibles". The audio will be about 10-seconds out-of-sync. (BTW, I own this movie).

  • No Alarms Work/ical alarms not firing. I have a solution that worked for me

    If anyone has had a look at this thread and still not found a solution...
    http://discussions.apple.com/thread.jspa?threadID=1215043&start=30&tstart=0
    try this (busycal)...
    http://www.busymac.com/index.html
    I was having serious problems with my iCal alarms. They just weren't firing reliably, and I tried so many things to get it fixed. Nothing worked until I installed busycal. it's perfect! It's been totally rock solid for 20 or so days and I just purchased a full licence. Has very neat features like LAN sharing and google cal syncing. Even if it didn't need these features, I'd still use it because I rely on alarms firing, and busycal does it without issues. Support is also excellent (they email quickly, with accurate/helpful replies, and they've even made suggestions to me about settings I can change to make everything run more smoothly. amazing!) the quality of support, frequent updates and reliable alarms is worth the small registration price along!
    and no, i don't work for them, i'm just a very happy user and hopefully it will help some other frustrated ical users out there!
    alex =)

    try busycal support. they really are excellent and i'm sure they can help u work towards a solution. click "email support" in the busycal help menu.
    alex

  • Solution that worked for iPad connection to "n" nework!

    So, reading of the many wireless issues with the iPad, specifically connecting to, and maintaining a stable connection to an 802.11'n" network, I decided to do some research. Many solutions here, suggest altering the radio mode to "g" only, as this is what the Ipad seems consistently able to "talk" to.
    After applying the steps below, my iPad now has a completely stable connection to my "n" network. I should mention that I have a dual-band network setup at home, one (b/g) via an older "domed" Airport Extreme Base Station; the other is via an original Time Capsule (circa 2008), which was set to an "802.11n only 5GHz" mode. Using Airport Utility, I could see that in the Wireless tab, the TC "channel" option, was set to "automatic." NOTE: this is BEFORE my modification that solved the issue.
    After reading up on the subject, I learned that the5GHz range of a router can be significantly shorter compared to 2.4GHz; one can move a short distance away from the 5GHz router and your connection will dwindle or drop all together, whereas with a "g" radio mode, in the 2.4GHz mode, the distance allowed, seems far greater. Now, with the channel option of the TC set to "automatic",(under the "wireless" option in Airport Utility setup), it is quite possible that the device is selecting a lower channel, when none is specified. The lower the channel, the lower thepercentage of the transmission rate, which in turn drastically reduces the signal strength, leading to the endless loop of dropped connections, or even worse, the "n" network being invisible to the iPad altogether.
    Here is what I did to produce a totally excellent connection to an 802.11n network, using an Apple Time Capsule (TC). The secret is in forcing the base station to operate ONLY on a higher channel!
    1) Using Airport Utility, use the "manual setup" option to reconfigure the TC. Select the "Airport", then "Wireless" tab.
    2) Select the "Radio Mode" to _802.11n only 5GHz_
    3) Important step! Look at the "Channel" tab - if it is set to "Automatic", this is what needs to change! In the original TC, you will need to hold down the Option key to see the other available channel selections:
    I selected 153, but anything over 149 (including), should produce the desired results. Remember, in the 5GHz range, the higher channel will produce a higher transmission rate.
    4)Still in the Wireless tab, click "wireless options". Make sure that "Use wide channels" is checked.
    5) After the above steps are completed, update your Time Capsule.
    6) Now go to your iPad, open your Settings/Wi-Fi.
    Select your "n" Nework, >configure> select to "Forget this Network".
    Now connect to your "n" network again, you will be prompted for your password, enter it and voila! you should have stable connection "n", without having to resort to the "g" only regression!
    Just for your info, my wireless encryption is set to WPA2 Personal.
    I really hope this works for others as well as it has worked for me. This setup was done over 4 hours ago, and I have experienced consistently excellent range/signal all over my house (4,800 sq ft), through closed doors, on different floors, even the garage!
    Message was edited by: Lauren R
    Message was edited by: Lauren R

    Thanks for the suggestion. I followed them to the letter. I have a time capsule and a base station. I switched the time capsule as you suggested. I got rid of the previous connection on the ipad and connected. At first when it started I had full bars. I walked to the opposite side of the house (2000 sq. ft house) was going strong and it dropped to one bar. If I turn the ipad off for awhile full strength comes back. Unfortunately, in my experience no joy.

  • Encoding Audio - Solution that worked for me

    Hi all,
    As some of you may or may not have known, i was having trouble with my iDVD project hanging at the encoding audio stage for about 24 hours.
    Yesterday i decided to try out a suggestion that i had seen on another thread somewhere. Appologies as i cannot recall where i saw it. However it worked for me.
    This is what i did
    I saved my iMovie project as normal (containing 160 clips and 5 songs from my iTunes library) and then closed iMovie.
    I then opened up iDVD and chose 'new project'. I selected the theme i wanted, and then i opened up the 'DVD map' function. I then clicked the plus sumbol and chose 'add new movie'. I then opened up finder, browsed to my iMovie project file and dragged it into the tile i had just created.
    All the scene menus populated as it would have done if i had 'exported' to iDVD from iMovie. I then added some background pictures etc, and burnt the project to 'disc image'.
    The audio encoding part hung for about 2 hours as normal with the beach ball of death but i could see that the iDVD project file in finder was getting larger (a helpful tip that several of you taught me).
    Then the beachball dissapeared and the encoding bar began to fill up blue. And then the image was created.
    All in all it took 4 hours which, for a workaround is fine by me (although a fix would make me happier)
    So i think the trick was to not use the 'export/share to iDVD' option in iMovie.
    On a side note. This method also eradicated the audio lagging that i was experiencing before where the songs at the end of the project were suddenly 2 seconds behind the film when viewed in iDVD.
    I hope that this method works for others experiencing this frustrating problem.
    Kind regards
    LJ

    Hi M
    Thank You for stating an advice I often give as so many else does.
    Nice to see that it works for You to.
    And a good and well writted description !
    All Good Luck !
    Yours Bengt W

  • AppleTV2 - home sharing issues - (solution that worked for me)

    I have been unable to connect to home sharing for a few weeks. I was speaking to a customer today that just so happened to be an Apple employee (wearing her badge). I told her about my problem, she told me to reset my router. So, I came home an took a paper clip and pressed the reset button. Within a minute my Apple TV2 could see my iMac music library, etc.

    No, i`m sure that trick it`s not working for me and for rest of us.
    I did try all trick in the bios, and...

  • Airport extreme and Printing : a solution that works for me

    I post a new topic in order to avoid people going throught various topics.
    _Explanation of the problem I had :_
    When I plugged directly my printer (xerox 6110) to the usb of my PowerBook it worked fine. When I connected the same printer with the same cable to the usb port of my airport extreme (square model), I was Apple to install it throught bonjour on my laptop and my IMac. But I was only able to print trhourght textedit, and not throught word, excel, safari, etc. When printing from this application, after a while I had a page print with a timeout problem.
    Solution (thanks to the following post : http://discussions.apple.com/thread.jspa?threadID=1201663&tstart=0 )
    After trying drivers, and lot of other things, I tried what suggested in the topice above : I changed my USB cable that was connecting my AE to my printer : and now IT WORKS.
    It is strange because I was able to print directly throught USB using the same cable, but not using my AE.
    But anyway It work now !! This is the most important ! a lot of thanks for your help.
    Hope it will help some of you

    Ohhhh, Silly, silly moi. Ok, got it. Now I see "Partition". Thanks! Will try again. Downloading Windows support software as I type.
    Thank you.
    One more thing - while attempting installation the first time (before I stumbled on this thread) - I looked up YouTube re how to create a USB bootable ISO (which included editing the info.plist file in Boot Camp Assistant).
    When I tried installing 8.1 from the ISO, the installation aborted saying "cannot find resources" (something like that) - this occured after the first stage, i.e. while "preparing files to install Windows".
    Assuming I get this again (I hope not!), is it because of a corrupted ISO?

  • Web page entries not responding in Firefox that work on Safari.

    1.
    http://www.buytickets.firstgreatwestern.co.uk/combinedmatrix.aspx?Command=TimeTable
    After selecting 'Show prices' page does not move on. Using 'Back' to show prices and selecting ticket no 'Next' button appears.
    2.
    https://uk.virginmoneygiving.com/fundraiser-web/donate/makeDonationForFundraiserDisplay.action?fundraiserActivityId=181498
    On selecting 'Other' the amount box shows steady caret and will not accept input from keyboard, though the message box will show flashing caret and accept input.
    The page does not freeze. Cache has been cleared.
    These problems do not happen when using Safari 5.1.2

    Hi,
    Please also check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Maybe you are looking for