MX460 Run dll as an App failure

Help Help!!!
Just built Athlon 1800+
ASUS A7S333
MSI Geforce 4 MX 460
XP Pro
Unable to access MSI display properties, "run dll as an app encountered a problem".
AppName rundll32.exe
Appver 5.1.2600.0
ModName mscicpi.dll
Am able to access all other display options.
Installed Medal of honor. If start in 640, runs fine. Increase to 1024, runs fine. Start in 1024, black screen-system hang.
Have re-installed card, updated drivers via MSI,NVidia and win XP update ASUS etc... Unable to find any reference in MSI or technet.
Thought rundll32 was win 9.X call???
Any suggestions?
THX

Tried re-formatting, but XP drivers don't recognize the card.
Tried with WIN2K Pro. similar errors.
I suspected Win98SE would run better, but it's an Athlon 1800XP chip and would run better on XP. It's all for a friend.
Think I'll recommend an ATI video card....
Thanks anyway!

Similar Messages

MSI Ti4200 Run DLL as an app. error

Hi all,
Sorry if this has been answered before.
I have an MSI Ti4200 VTD-8X (128mb) with VIVO running on a 2.4Ghz, 512 mb, Asus P4S8X motherboard, PC running Windows XP.
The problem is that when I try to access the MSI Settings tab in the control panel I get a " Run.DLL as an application error" message. The error message was more detailed before I upgraded to service pack 2 and said something about 'system 32' but now all I get is the above message. I can access all other options under the control panel but not this one.
Tried all latest and different drivers as well as un-installing re-installing Windows to no avail. Problem has been present since I bought the PC (about a year and a half ago).
Any help would be appreciated.

Cheers for the prompt replies.
The problem was there even when the computer was brand new and the only drivers that had been installed were from the MSI disc. Have since tried all combinations of uninstalling/re-installing MSI drivers and XP itself to no avail. Uninstalling the old one as opposed to installing the new one over the top as well. Currently using the latest Forceware driver (5.6 or 6.something?) and find that to be pretty good (fixed another problem I had with capturing video) but still didn't fix this problem.
Forgive me, as I know very little about this sort of thing, but could it be a conflict with the card and motherboard (even though Asus list the card as compatible) ? Or a bios thing ?
Tried in vain to get help from MSI with no luck. Frustrating as I'd like to tickle the old girl up a bit. I hear you can get them running the same specs as Ti4400's.
Thanks again.

Windows Server 2008: Sysprep Error: Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]

I have a base template (which has never been sysprep'd) from which I create linked clones. After the linked clone comes up, I run the following command:
c:\windows\system32\sysprep\sysprep.exe /generalize /oobe /reboot /unattend:c:\windows\panther\unattend.xml
This works fine for the first few linked clones, but after about 3-4 linked clones are running, I start to hit "A fatal error occurred while trying to sysprep the machine."
****c:\windows\panther\setuperr.log****
2013-03-29 16:40:07, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]
2013-03-29 16:40:07, Error      [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x80070020[gle=0x00000020]
****c:\windows\panther\unattend.xml****
<?xml version='1.0' encoding='utf-8'?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UILanguageFallback>en-US</UILanguageFallback>
            <UserLocale>en-US</UserLocale>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Enabled>true</Enabled>
                <Username>Administrator</Username>
                <Password>
                    <Value>ca$hc0w</Value>
                    <PlainText>true</PlainText>
                </Password>
            </AutoLogon>
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <NetworkLocation>Work</NetworkLocation>
                <ProtectYourPC>3</ProtectYourPC>
            </OOBE>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>ca$hc0w</Value>
                    <PlainText>true</PlainText>
                </AdministratorPassword>
            </UserAccounts>
            <TimeZone>Pacific Standard Time</TimeZone>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ProductKey>7M67G-PC374-GR742-YH8V4-TCBY3</ProductKey>
            <ComputerName>*</ComputerName>
        </component>
    </settings>
</unattend>
****c:\windows\panther\setupact.log****
2013-03-29 16:40:07, Info       [0x0f004d] SYSPRP The time is now 2013-03-29 16:40:07
2013-03-29 16:40:07, Info       [0x0f004e] SYSPRP Initialized SysPrep log at c:\windows\system32\sysprep\Panther
2013-03-29 16:40:07, Info       [0x0f0054] SYSPRP ValidateUser:User has required privileges to sysprep machine
2013-03-29 16:40:07, Info       [0x0f0056] SYSPRP ValidateVersion:OS version is okay
2013-03-29 16:40:07, Info       [0x0f005e] SYSPRP ScreenSaver:Screen saver was already disabled, no need to disable it for sysprep
2013-03-29 16:40:07, Info       [0x0f007e] SYSPRP FCreateTagFile:Tag file c:\windows\system32\sysprep\Sysprep_succeeded.tag does not already exist, no need to delete anything
2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'GENERALIZE'
2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'OOBE'
2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'REBOOT'
2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'UNATTEND'
2013-03-29 16:40:07, Info       [0x0f004a] SYSPRP WaitThread:Entering spawned waiting thread
2013-03-29 16:40:07, Info                         [sysprep.exe] UnattendFindAnswerFile: Looking at explicitly provided unattend file [c:\windows\panther\unattend.xml]...
2013-03-29 16:40:07, Info                         [sysprep.exe] UnattendFindAnswerFile: [c:\windows\panther\unattend.xml] meets criteria
for an explicitly provided unattend file.
2013-03-29 16:40:07, Info                  SYSPRP SysprepSearchForUnattend: Using unattend file at [c:\windows\panther\unattend.xml].
2013-03-29 16:40:07, Info                  SYSPRP SysprepSearchForUnattend: [generalize] pass in unattend file [c:\windows\panther\unattend.xml] either doesn't exist or passed
validation
2013-03-29 16:40:07, Info                  SYSPRP WinMain:Found unattend file at [c:\windows\panther\unattend.xml]; caching...
2013-03-29 16:40:07, Info                  SYSPRP WinMain:Processing unattend file's 'generalize' pass...
2013-03-29 16:40:07, Info                  SYSPRP Sysprep is running a generalize pass with the following unattend file: [%windir%\panther\unattend.xml]
2013-03-29 16:40:07, Info                  SYSPRP RunUnattendGeneralizePass: Sysprep unattend generalize pass exits; hr = 0x0, hrResult = 0x0, bRebootRequired = 0x0
2013-03-29 16:40:07, Info       [0x0f003f] SYSPRP WinMain:Processing 'cleanup' request.
2013-03-29 16:40:07, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]
2013-03-29 16:40:07, Error      [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x80070020[gle=0x00000020]
2013-03-29 16:48:52, Info       [0x0f004c] SYSPRP WaitThread:Exiting spawned waiting thread
2013-03-29 16:48:52, Info       [0x0f0059] SYSPRP ScreenSaver:Screen saver was originally disabled, leaving it disabled
2013-03-29 16:48:52, Info       [0x0f0052] SYSPRP Shutting down SysPrep log
2013-03-29 16:48:52, Info       [0x0f004d] SYSPRP The time is now 2013-03-29 16:48:52

Hi,
This is typical of an OEM license issue.
To avoid this in the future you should look at site/volume licensing.
Anyway.
so, first check if you can re-arm by runing the
slmgr.vbs /dlv and check the re-arm counter, if it set to zero.. you need to do the following :
http://support.microsoft.com/kb/929828 (set the <SkipRearm>1</SkipRearm> like in the example, note: this option will make the product key window to appear in the setup process).
you can also try running : slmgr.vbs -rearm, to rearm Windows.
after that, let's come back to the sysprep process.. for syspreping already syspreped machine we have to change few keys in the registry :
HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus\GeneralizationState\
CleanupState:2
HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus\GeneralizationState\
GeneralizationState:7
After done with the registry, do the following :
Start -> Run : msdtc -uninstall (wait few seconds)
Start -> Run : msdtc -install (wait few seconds)
Restart the machine
Check the registry for the right registry keys values
sysprep with the new XML answerfile.
Source: Olegm
If you find my information useful, please rate it. :-)

RMMR1MRS-When run in background cause update failure errors looking

hi,
RMMR1MRS report when run in background cause update failure errors .
There are few below reason for the error log.
1. for the PO invoice already generated - (its right if already invoice generated. should not happen again)
2. In MIGO, entire quantity has been reversed and also invoice generated with zero value - ( its right , should not happen invoice again )
3. Particular PO line item deleted - (its right if the PO line item deleted. ERS settlement not require)
For the all above reason, the update error occurs. But the mean time the program "RMMR1MRS" should not through the update error log.
Note: The job was not terminated due to this update error and also no harm because of the error log
can you please help on this update failure why it occurs.

Have you found a solution already? If so, please, share it with the community and close this thread.

Error in running oracle report on APPS due to print style

Hi
i have an oracle report which displays about 550 rows of data...When i try to run it with oracle apps i selelect landwide but i get an error as the defined style can not print that much amount of rows.Is there any toher style which prints this many amount of rows or i have to create a new print style.
thanks
isha
Edited by: 791666 on Aug 30, 2010 8:33 AM

Please tell us about your product, version and Application Server type. You may also want to note that Oracle Apps is different from Oracle Application Server .
Also intriguing is the error you report. Where and what exact error do you get? Error codes/messages need to be reported exactly (not paraphrased).
Was that in displaying the info or in printing it to a printer?

What is Apple doing to fix iPhone app failure

This problem looks like a bad MS conflict error... One of the biggest reasons I got away from PC.
I have a new (now 4 days old as of this posting) 3G iPhone with all updates. It has been registered with Apple and synced with my iTunes. I have loaded free apps on my iPhone with the reasoning being that if the free apps don't work, I surly will not buy an app from the designer of a non working free app.
I have done the reset and reboot, which "some" of the apps did work fine. But all, non standard iPhone apps, crash on startup following a sync section with iTunes.
Without claiming to be a programer or even a technician, it appears that the cause of the down loaded app failure stems from the sync with iTunes and maybe poor app design. Anyone from the PC world will recognize this as a "conflict error".
At the iPhone introduction Keynote address, I feel Steve Jobs lead me to believe that is would not happen with the 3rd party development of apps. It's just not the "Apple" way. I maybe wrong in that it is not an actual "conflict error" but something else, still, it is not what I have come to expect from Apple and hope that this problem is not a sign of the future with Apple. It also appears that better "quality assurance" is needed with app development and iPhone syncing.
My question is:
What, if anything, is Apple doing to solve this massive problem with downloaded apps and the iPhone and syncing with iTunes?
If someone could show me a link with an Apple reply to solving this problem besides reset/reboot/reload I would be a little more confident in knowing that I didn't waste good money and "TIME" in getting the iPhone.
This boot-reboot, reset, wipe it clean approach is not good, to much like living in the MS world, not Apple.

Going to the local Apple store this morning...
My problem is not uncommon as the board is showing signs of this happening to many others as well. That is where I found the restore and reboot information to try to solve the issue of crashing apps.
I understand that Apple will not "give away the cow", but letting iPhone users know that the problems they are having are being addressed by Apple is a little more comforting than nothing at all. Other wise, all the apps in world are useless and even more importantly worthless, if a person has to reset/reboot/reload just to get them to work.
IF Apple can not address the basic problems with todays iPhone apps, why should one believe that the iPhone 3.0 OS is any better? Using a PC comparison, which is better, XP or Vista. If the current iPhone OS of 2.2. what ever is not working that well (as related to down loaded apps and iTunes), will OS 3.0 be any better?
The waste of time I refer to is in going to the apps store and downloading the apps... Again why by apps if the free version does not work?

Server Error: Unexpected Error when running Napa SharePoint 2013 App

I am getting an error "Server Error : Unexpected error" when I try to run a SharePoint 2013 app in Napa Development environment.
It starts the process normally but after it shows "Uninstalling previous version" it throws the error. This has been happening since yesterday.Someone help

I have a solution to the problem. I had a folder with a JSON file. On renaming the file to .txt, the app ran normally. I believe .json files are not supported in SharePoint hence the error.

How to schedule ETL jobs to run periodically after BI Apps is up and runnin

Hi,
How do you schedule ETL jobs to run periodically after BI Apps is install and configured? Is there document out there that explains how the ETL scheduling is setup?
Thanks

Using DAC we can schedule the ETL to run periodically. In DAC Execute -> Scheduler you can set the date and time for the ETL which need to be scheduled. You can get detail information in guide 'Oracle® Business Intelligence Data Warehouse Administration Console User’s Guide'

Can I use ClassLoader to limit the number of running instances of my app?

Hi
I want to limit the number of running instances of my app to 1 (like what IDEA and... do), can I do that with a class loader? How?
Thanks in advance,
Behrang S.

No.
If you search the advanced forum you will find several discussions on how you can do it.

Getting error message: "Run DLL" There was a problem starting. C:\users/John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll

Keep getting the error message below every time I start my computer:
Run DLL
There was a problem starting
C:\users\John\AppData\Local\Conduit\BackgroundContainer\BackgroundContainer.dll
The specified module could not be found.

RunDLL is a legitimate Windows file that executes/loads .dll (Dynamic Link Library) modules which too can be legitimate or sometimes malware related. A RunDLL "Error loading... message usually occurs when the .dll file that was set to run at startup in the registry or as a scheduled task has been deleted. Windows is trying to load this file(s) but cannot locate it since the file was mostly likely removed during an anti-virus or anti-malware scan. However, an associated orphaned registry entry still remains and is telling Windows to load the file when you boot up. Since the file no longer exists, Windows will display an error message. You need to remove this registry entry so Windows stops searching for the file when it loads.
To resolve this, download AutoRuns and save it to your Desktop from this site:
http://technet.microsoft.com/en-us/sysinternals/bb963902
and follow these Steps
* Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there.
* Open the folder and double-click on autoruns.exe to launch it.
* Vista/Windows 7/8 users right-click and select Run As Administrator.
* Please be patient as it scans and populates the entries.
* When finished scanning, it will say Ready at the at the bottom and list all entries under the Everything tab.
* In the top menu, click File > Find... and type the file name (backgroundcontainer.dll) related to the error message, then click Find Next.
* Alternatively, you can scroll through the list and look for any entry related to backgroundcontainer.dll and conduit.
* If found, right-click on the entry and choose delete.
* Exit Autoruns and reboot your computer when done.
'''An alternate method to resolve this issue is as follows:'''
1. Go to Start > Control Panel > Administrative Tools.
2. Open Task Scheduler and click on Task Scheduler Library.
3. Look through the list for an entry related to BackgroundContainer.
4. If found, right-click on it and select Delete.
5. Exit all programs and reboot the computer when done.
Also Scan your system with the tools listed in this Article:
[[Troubleshoot Firefox issues caused by malware]]

Can you run SCO UNIX platform apps on 10.4?

Just wodering if it is possible to run SCO UNIX platform apps on a Mac?
I have 2 applications designed to run on SCO UNIX and I would be interested to see how they work.
I don't know anything about the us of UNIX BTW
G4 Mac OS X (10.4.4)

Hi Atlantean,
   It's certainly not possible to run a precompiled binary and SCO isn't exactly known for their open source community spirit. They'd probably sue you. I'm a little surprised that you'd mention them in polite company.
Gary
~~~~
   "Spare no expense to save money on this one."
         -- Samuel Goldwyn

C:\Windows\ehome\ehuihlp.dll Run DLL error message

When I start my laptop (HP Pavilion dv6-3120us Entertainment Notebook; 64-bit operating system; AMD Turion II P540 dual-core processor, 2.40 GHz) , the following Run DLL error message appears: "There was a problem starting C:\Windows\ehome\ehuihlp.dll.
The specified module could not be found." I wonder if this is related to my uninstalling (or attempting to uninstall) Windows Media Center, because it would take such a long time to open, and I didn't know how to disable it from automatically starting.
Do I need to reinstall the file? I don't think I have any original software separate from what came with the laptop. I do have a Recovery Disc Set from Feb. 2011. Is there another way I can download the file and/or fix this?
Thanks.
SL

Thanks very much for the reply. I did uninstall the software by using the Add/Remove Programs from the Control Panel. I went in and unchecked the box for Windows Media Center and when I rebooted, the message didn't come up again.
I also started getting another similar DLL error message, but it was under our Users folder: AppData\Roaming\newnext.me\nengine.dll. I unchecked it ("Next Live") the same way as for the Windows Media Center and when I rebooted, it didn't come up. I didn't
uninstall or do anything else, so do I need to do so? (I don't know what "Next Live" is.)
Thank you,
SL
SL-7

{run DLL} THERE WAS A PROBLEM STARTING "C/USERS/OWNER" runDLL

I keep getting this error message.....why? "
{run DLL} THERE WAS A PROBLEM STARTING "C/USERS/OWNER" runDLL
This question was solved.
View Solution.

I understand you are getting an error message relating to a runDLL.
What is the product number of the notebook? This can typically be found on a label on the underside of the notebook or in the battery compartment. This label should also contain the serial number.
NOTE: Do NOT provide the serial number.
What OS is the system using? For example, Windows 7 or Windows Vista.
Did this happen after a particular program was installed or uninstalled?
RunDLL errors can be the result of malware. Have you scanned the system for malware using an updated anti-virus program?
Does it happen in a clean boot state? This document details how to enter a clean boot state.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Unable to run native iOS7 Mail app and Gmail app at same time on iPhone 5s

Got a new iPhone 5s. Installed the Gmail app, it collects mail just fine. BUT I'd like to run the native Mail app that came on the phone at also, as a backup...just in case. The native Mail app keeps telling me that either the username or password are incorrect. Anyone with help to fix this would be appreciated. Thx.

That would be a gmail issue. From other threads there is a two-step verification when using gmail..Log into your account on a browser and double check the security.

My MBpro has been running some kind of app in the background upon turning on, heating up for no cause. Is this normal since Snow Lepard? It's been updated and I also have anti-virus software too.

My MBpro has been running some kind of app in the background upon turning on, heating up for no cause. Is this normal since Snow Lepard? It's been updated and I also have anti-virus software too.

you're welcome....
also check activity monitor - all processes - see what's using up most of your cpu resources under % CPU....
highlight anything that's really high and hit quit process......anything over 10% is considered high - unless it's your browser....
good luck...

MX460 Run dll as an App failure

Similar Messages

Maybe you are looking for