MX460 VTP & W2K video in/out problem

Hi,
i have bought the card as described but i can't activate the nView (tv out) function in Windows 2000.
I've tried to install and uninstall a lot of drivers but tothing happen.
Wath must i do ?
Drivers 30.82
Bios 30.06
WDM Drivers 1.1.6
Thanks

Quote
Originally posted by Adde
Hi,
i have bought the card as described but i can't activate the nView (tv out) function in Windows 2000.
I've tried to install and uninstall a lot of drivers but tothing happen.
Wath must i do ?
Drivers 30.82
Bios 30.06
WDM Drivers 1.1.6
Thanks
X( i check out at tv tool web page an i discover that the gforce 4 mx is not supported by that soft. so please to the developers of the graphic card give th specs so we can switch between vga and tv

Similar Messages

Persistent Subpanel - Video Pop out problem.

I want to have it a video display on my main vi that can be "popped out" when a button is clicked. To do this I thought to run the pop out window as a subvi and embed it in a subpanel on the main vi until the user presses the pop out button. However, I can't figure out how to make it so that when the vi isn't running for the subpanel to show the front panel of the subvi. Is this persistent subvi subpanel behaviour possible?
Regards,
Craig

Hi There!
It's not possible to do this, however I've written you a possible work around to explain how you can immatate this. Basically, you overlay a picture ring on top of your SubPanel - you can then hide it's label and index. Take a print screen of the subpanel when it's running and input that into the ring. when you start the program have the visability set to true (so it can be seen) untill you change the picture, then set it to false. Finally, at the end of the program make it visable again.
This seems to me the only way we can replicate what you're after, please find it attached.
Thanks!
Max
Attachments:
TopLevel.vi ‏16 KB
SubVI.vi ‏9 KB
FPImg.JPG ‏16 KB

MSI MX460-VTP tv-out problems

I just buy one MSI MX460 with VIVO, but TV in/out only works with the supplied drivers (Detonators 27.20). Installing any other version only appears one cyan screen in the TV.
The same thing with video capture, installing WDM drivers 1.19 the video in don't works, only with the supplied drivers (WDM 1.11)
Please help me!
My system:
- MSI MX460-VTP 64MB DDR
- WinXP SP1
- AMD TBird 850
- Soyo K7VTA-B KT133
- Micron 512MB RAM
- SoundBlaster Live! 5.1

do you uninstall the drivers before installing the new ones?, if not try that as drivers can be picky at times

The Video Out Problem...Fixed?

I know Wikipedia can be edited by virtually anyone with membership and an opinion, but I had to know.
It said that an itunes update 1.0.2 fixed the video out problem...does that mean that videos can now be connected to a TV and play on the TV? They fixed that?
I am still ever in the market for the nano, just waiting until the right ammount of money to purchase one. Thanks

I think it is currently working according to this knowledgebase article: http://docs.info.apple.com/article.html?artnum=300233
That is, for the new Nano, you can use the older iPod Universal Dock (ie the normal one that has been available for a couple of years) together with an iPod composite video cable or an SVideo cable (ie all currently-available stuff you may have already bought for a previous-series video iPod), OR you can use the brand new "Apple Universal Dock" with the brand new Apple Composite AV Cable or with the (new) Apple Component AV Cable, OR you can use one of those brand new Apple AV Cables directly with the Nano (without the new Apple Universal Dock).
What you cannot do is connect an old video cable or accessory, which was expecting to get composite video from the RCA/audio jack on the Nano, because it looks like (on the new Nano and the Classic) the audio out jack is now just for audio out and video is only available via the dock connector on the iPod.
ted.h.

Horrible video skip / lag problem - once per second in all apps!

I built a new system last month (my first AMD) and I am having a really aggravating problem. In all games and all video playback I get an annoying skip once per second, every second. It affects sound during gameplay but not during movie or mp3 playback. It even happens with the visualization mode in Windows Media Player.
My system is as follows: MSI K8N Neo4-F, A64 3200+ venice core, MSI 6800GT 256MB PCI-E, two sticks of Corsair valueselect DDR400 512MB each, 500 watt PS, 160GB 7200 SATA HDD. Most recent NVIDIA drivers for everything. WinXP Pro with SP2 and all updates, DX9C. Nothing overclocked, all settings standard.
I have tried the following solutions:
1) BIOS upgrades, started with 1.4, installed 1.5, MSI tech support gave me 1.6b2 and I installed that. No luck with any of them.
2) Memory, installed per MSI directions, but I've tried all legal combinations, including one stick at a time. No change.
3) full format and reinstall of WinXP. No luck.
4) Switching between WinXP IDE drivers and NVidia drivers, with and without RAID drivers, No luck.
5) Removal of 6800GT PCI-E card and replacing with Ancient 8MB PCI Permedia2 video card. Problem still persists.
6) Disable onboard sound and LAN. No luck.
7) Running Fedora core 4 on second partition. Installed Nvidia video drivers, tried some games. THIS WORKS! No hitch, no skip, no nothing. Framerates are noticably slower but very stable. In WinXP I saw framerates bounce all over the place, from 230 FPS down to about 70 with one game. That same game on Linux ran smoothly at about 166 FPS with only occasional slight drops. The big FPS drops in Windows usually came right after one of the skips but didn't occure after every skip.
Right now I'm stumped. Linux uses totally different drivers for sound, LAN and SATA support. Some of those drivers don't fully use the Nforce4 chipset's features, maybe that's part of the difference.

Thanks TireSmoke:
I had found that sticky, but I took your advice and went thorugh it in detail last night. Lots of great info, fixes tweaks and tools, sadly none of them fixed my problem. The lag problem most people are reporting is not really like the wierd problem I am having. I have tried the recoommended fixes with ablsolutely no change in my system's behavior.
I am beginning to suspect a faulty motherboard component.
Russ_XP:
I think you are correct about fast writes. I googled the heck out of that last night and couldn't find any reference to enabling or disabling fast writes on PCI-E.
The drive is SATA-1. The Neo4-F is not SATA-2 enabled (there is a hack for it though). From memory I think it's a Western Digital WD1600-something, 7200 RPM dirve. I've tried it on both SATA buses and tried disabling the unused bus in BIOS.
I'm pretty sure I can dig up an old PATA drive somewhere and give that a try.
Gpalmer:
True enough, and I don't have these problems under Fedora. Sadly this is a cross-platform game development box, I need both XP and Fedora working.
Black_God:
Nope, this is a clean install. Although I wonder, could any of the built in XP update and security tools be causing this? I have disabled Windows firewall and virus protection monitoring.

GeForce2 MX - MS Starforce 818 S Video - TV Out not working ?

Hi,
I'm using MSI GeForce2 MX Nvidia MS Starforce 818 which have an S-Video video out port in it. A few while back, I try to use this TV Out port for the first time with the S Video cable given upon purchase. Since I have no idea how to use this TV Out port before, I was skimming through everything, and found out that I can use it by clicking on the "Display" properties of windows, go to the "Settings" tabs, and I can choose the display that I want to use, whether a regular monitor I'm using, or to the tv when the S-Video TV Out cable is plugged in. Yesterday I try to do the same thing, and suddenly on the "Display" properties, on the settings tabs, I can't choose where do I want the display to be, and plugging in the S-Video cable only cause the monitor to blank out.
I haven't tried uninstalling the video card, since I can't find the cd that comes with it when I bought the video card about 4 years ago.. and I can't seem to find the drivers on the net as well. I'm using win xp sp 2.
Anyone know how can I use the TV Out port aside from the "Settings" tabs of the "Display" properties of windows ? I'm lost right now, and dunno what is wrong.
Sorry if my english is hard to understand, do let me know if there's anything u can't understand.
Thanks,
Djoni

Now that Nview detects my TV I was hoping that maybe I could select the clone options and use the dual monitor option of my card. Nope, Nview detects the monitor and the tv but all the other options are greyed out. So I cannot use anything else than Standard (Dual View).
Ok. I think i have same problem. I have solved it by connecting my analog monitor to to DVI output with DVI to analog conector that came with the vga card. And it worked. Only now i have another problem. Vga card can't recognize my tv as PAL/G but as M/NTSC. Everytime i reboot my computer it goes back to M/NTSC. I am using detonator drivers 40.72 and with original MSI drivers it worked OK.

Ipod Classic 120gb TV out problem

Hi all,
I've been searching the web for quite some time now and the problem I have has gotten me fairly fustrated. I have searched the apple site, forums and support as well as other ipod-related sites, to no avail.
This is my problem.
After a fair amount of researching (more than I ought should be necessary) I found the right cable for my ipod's TV out fucntion.
After having purchased my cable (http://store.apple.com/us/product/MB129LL/B) several initial problems arose.
First of all, the ipod states that the cable is not connected. I hook up the cable though the iPod connecting port at the bottom, plug in the red, white and yellow tulips in the TV and the USB either in the charger or computer. In either case the cable will not be recognised.
From there on I have started my search for a solution. Several ways have been offered on the internet, none of them worked. One, however, lead to some progress.
When I reset my device (through holding select+menu) and enabled my TV out signal in the video playback settings menu, the signal works, but for a mere 30 seconds max. After that, the video out signal stops, my ipod goes back to the video selection menu and when I try to reinitiate the video it goes back to saying something in the likes of "TV out enables, please connect a video assesory", where problem I first encountered.
This means it is NOT the cable, as it cleary works after a reset. Something in my iPods soft- or hardware is blocking the signal after 30 seconds, and by now I really, REALLY want to know why.
So please, if there is anybody who can tell me why this is happening, it would be GREATLY appreciated, as this is starting to drive me mildly insane.
Thanks in advance,
Kind regards,
John
Message was edited by: palooza90210

Yes, I bought the dock so I could hook it up to my tv. Then I had to buy the cable, I didn't get the cable from Apple. at the time the cable was $50, I went to ebay & found the same cable for about $20. Just like you, I could not find an answer about why the dumb thing wouldn't work, so I just had do my own experiments. Good luck getting Apple to do anything. They don't seem to want to give anything away or replace merchandise.
Take care!!
H

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

Video & Audio out of sync after update

Ever since I updated my MacBook Pro to OS X Yosemite v10.10 last week, all videos are out of sync with the audio. It wasn't just on Safari while playing YouTube videos or DailyMotion videos, but also when playing videos files on my computer. For short videos, the audio is just a second ahead or behind the video, but for long films it can be minutes apart.
Does anyone else have this problem? Can anyone tell me what caused this and how can it be solved? Thanks so much!!!

I have the same issue and it started 3 days ago. This happens with anything I'm watching, netflix, huluplus, youtube, crackle, anything that has audio and video. The biggest issue is that it's also affecting iMovie and Final Cut pro X. This is a MAJOR issue given that I make a living editing video. I hope somebody can find a solution for this issue.

Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doe

Hello. The Youtube videos I placed in a site made in Muse, don't have sound and don't auto play in my Android phone. Can anyone tell me why? The same video has no problems when I watch it at the youtube site on my phone. It has sound on an iphone, but doesn't auto play either. Thanks!

Hi Mariana,
Please make sure you have the autoplay checkbox selected from the fly-out options:
Regards,
Akshay

Photo Booth Audio and Video are out of sync?

Hi. So there is this glitch that when I take videos on Photo Booth the audio and video are out of sync. This started after I upgraded to Mountain Lion, and since I use Photo Booth a lot, I really do care. Is there anyway that I can fix this until Apple fixes this bug? Thanks.
Extra Info: The first video I took was not out of sync, but after that they got more and more out of sync.

I've read all the forums. It's a big problem for most Photobooth users, Apple acknowledges it, but does not yet have a fix.
The best solution I have come up with is to dump Photobooth (I know - it was a great program, wasn't it? But so was Hypercard) and use Quicktime to make videos. You'll have to spend a little more work savings or exporting, but at least Quicktime is free.
Just open Quicktime Player and under the File menu you'll see "Record New Movie."
The downward slide continues...

Geforce 4 MX460-VTP vs ECS K7S5A

Hi there - here are my current system specs.
K7S5A rev1 MoBo with NEW BIOS update (as of today)
Athlon XP 1700+ with Zalman Flower Cooler
256Mb SDRAM
Creative Riva TNT2 32Mb AGP graphics
Creative Live Value Sound Card
Creative Blaster 56K Modem (brand loyalty???)
3com 10/100 PCI network card
Hauppage WinTV card
plus a DVD drive, CD-RW drive and two HDDs
All powered by a Q-Tec 550W PSU
I tried to replace the Riva TNT2 with a new (and tested) Geforce 4 MX460-VTP by MSI. I get 8 error beeps (VGA error) and fail to get the board to POST. Ive tried adding the new SIS AGP drivers (rev. 1.14), changing the RAM, removing EVERY component from the board and power chain (even the CPU cooler, as it doesnt need the fan) tried PCI graphics cards (which work - plus Im using an AGP card now) dropping the AGP down to 1x and nothing. I know the card works because it boots in three other machines (none of which have K7S5A boards) and I just cant get the board to POST.
If ANYONE has any suggestions please let me know, because the Geforce MX460 is an impressive card (and I only paid £45 for it) and the K7S5A has served me well this past year, and I dont want to have to choose between them. Please tell me whats going on before the geforce ends up on eBay

Well I changed my cards around abit and ended up with an IRQ setting like this :
5. MSI MS-Starforce GeForce 4 Ti 4200 with AGP8X
5. SIS 7001 PCI to USB Open Host Controller
11. Creative AudioPCI
11. Realtek RTL8139 Family PCI Fast ethernet NIC #2
11. SiS-900 PCI fast ethernet adapter
12. SIS 7001 PCI to USB Open Host Controller
Now the problem within #5 - is that "SIS 7001 PCI to USB Open Host Controller" appears to be my USB ports, which are onboard and I can't just move them around like my Netcard and soundcard - my GFX I can't move either, since I only have one AGP slot.
It still does the same freeze up however.
Also, I would really like to know how to remove the fan on the GFX, since I can't really clean it properly if I do not remove it. (It's a little dusty, and it will decrease heating if I get it cleaned properly)
~x~ Janine ~x~

DC111 - XBMC WIFI and Audio,Video drop outs

Hi
I'm using Linux XBMC on DC111. I found some issue when I'm playing movie, form time to time I have audio and video drop outs, but it's only appears when the WiFi card is on. But when I disable the WiFi by software (rfkill) the drop out disappeared. I found this one solution on web but there wasn't any explanation. Any suggestion it's hardware or software problem?
Thanks.

Hello @WBHNYC,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post (serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/How-to-check-your-messages/t...
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Nokia 808 Video mode - Jerking problem

The Jerking only happen when video mode happen on all setting 1080p,720p,360p. So I guess someone really happen in the hardware itself. Yes I tried touch screen zoom in this video and also volume button in the middle of the video. Both having the jerking 2 to 3 times starting from 1/3 of the zooming.
Zoom function is work perfectly find on photo taking mode tested on 8mp 5mp 2mp.
I have taken a sample here
http://www.youtube.com/watch?feature=player_embedded&v=kYsYaQRkrYw
I don't think its normal to have the jerk. Is my set having problem?

ok guys. I had sent my set to Nokia service centre for repaired. It factory reset everything and upgrade to FP2. Now the camera looks smoother I notice video stablisations 'on' will cause the shaking of video zoom.
On video mode ,the jerking problem is back.
To fix the problem I try to go to picture mode and off the stablisation and test swype the zoom afew times and back to video mode the problem is gone.
So the problem is:
It will jerk everytime I try to zoom in video mode. Picture mode not so obvious since it zoom very fast and don't takes video. Only video mode will be affected.
temporary solution found
go to picture mode and off the stablisation and test swype the zoom afew times and back to video mode the problem is gone for a while.
If i try to use the zoom often like 30times or more, somehow it triggle it to cause the jerking and have to disable stablisation and go picture mode and swype zooming afew times which somehow will recover from the unstable zooming. back to video mode and test it should be ok now.
Is anyone out there having the same issue too?

HELP!! Lumia 710 Video recording/saving problem

So I'm having my Nokia Lumia 710 from 2012 February. I tried to record videos but there are 2 different ways how my phone handles it
1. After making a video, it freezes (The screen freezes, the last picture of the video is visible, it's probably saving) and than, the video is gone. The phone locks itself, and the video+music library doesn't contain my video
2. The phones saves my video (happened only a few times...) , but when I'm looking it back (on PC and on phone) it's lagging, and pictures fall out... Seconds fall out from the video, but the sound is running. The picture freezes sometimes, and the sound is running.
The longer the video, the bigger problem.
HELP ME PLEASE!!!

I'm experiencing the same problem (1) with my Lumia 800. It started recently and does not always occur.

MX460 VTP & W2K video in/out problem

Similar Messages

Maybe you are looking for