MX472 won't recognize new ink cartridges code 1401

I recently needed to replace my ink cartridges on my MX472 and immediately following the install, I received several beeps and a code on the LCD display of 1401. That code means ink not installed. Consequently, I cleaned the contact strips with alcohol, did a hard reset of holding the stop button for 5 seconds, another type of reset of holding the stop button for 2 seconds, then pressing and holding the power button followed by pressing the stop button 5 times. I also unplugged the printer for 5 minutes with the cartridges out of the printer and plugged it back in, reinstalled the cartridges and still received the 1401 error code Check Ink. I went and bought another set of authentic Canon ink thinking the first set was defective and still a no go on the second set. Is my printer ready for the trash can? Its only 6 months old! Anyone have any other thoughts or ideas? Thanks in advance.
Solved!
Go to Solution.

Hi Gregg1,
Since you continue to receve the error after performing the troubleshooting steps you have mentioned, the printer will require servicing. Since you purchased the printer within the past year, it is still within the warranty period; please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

C7200 all in one won't recognize new ink cartridge

The all in one screen is requesting that I change one of the color ink cartridges. I have purchased three, but it will not recognize any of them. In reading other posts and trying to glean solutions, I have done a power reboot, wiped the contacts with alcohol, and updated drivers. I don't think all three of the new hp cartridges could be the culprit. Is there anything else to try?

Hi,
PLease follow the steps mentioned in the link
Open www.hp.com and search for the document c02005923.
If the issue is still not resolved,it could be an issue with the Printheads.Please call HP to confirm the same.
If the issue is resolved,please click on Accept as Solution or Kudos
Though I am an HP Employee,the answers given are to my knowledge
Regards,
Ronnie_N
Distinguised Professor

D7355 won't recognize new ink cartridge

I ran out of yellow ink and replaced it but it still shows zero ink level. Any ideas?
Thanks Jeff

My wife installed it the first time and she thought she might have done just that. But, She bought another one and I installed with the same result. I tried to print a test page it only prints in gray scale. This is what it says: Cannot Print
The ink in the following ink cartridges is depleted.
YellowReplace the following ink cartridge to resume printing.
For HP product return and recycle information, visit us at: www.hp.com/recycle
Message Edited by JeffT on 12-13-2008 12:52 PM

Printer does not recognize new ink cartridges

The printer stopped printing in black even though I did not receive a low ink indicator. I checked the display screen and there was nothing showing in the black or photo columns. The cyan, magenta, and yellow all have colors showing with a yellow warning triangle toward the top. I went ahead and replaced both the black cartridge (564XL ) and the photo cartridge (564). The display screen still does not indicate an ink level in either slot and it does not print in black.

Hi - First question - are you using HP cartridges or are they refills. If they are refills, you'll want to try an genuine HP cartridge. If you are using HP cartridges, try resetting the printer:
Reset the printer:
CAUTION:
Do NOT perform any other type of reset on the printer before the ink initialization process has been completed.
Without turning the power off, remove the power cord from the back of the printer and from the wall socket.
Wait 30 seconds and reconnect the power cord to the printer and to the wall socket. Turn the unit on if it is not already turned on.
Check the printer for the error message. If the error message still displays, go to the next step.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Printer won't recognize new cartridge

My printer (All-in-one, 1200 series) won't recognize a new cartridge.
When the present one ran out of ink, I purchased a brand new Hp cartridge. When I installed it, it says E (error) and won't do anything. Thinking there was something wrong with this crtridge, I purchased another one....same thing.
I put in the empty cartridge, and it prints, but nothing comes out as it is empty.
Today, I called HP tech support, and they told me my printer was old and that I need to buy a new one!!!!!
Some help!
I didn't have any refill black ink, but I do have colored. I put blue ink in the empty black cartridge, and it is printing again beautifully.
Can anyone tell me why the printer won't print with the brand new cartridges????

Hey Foldy,
Welcome to the HP Forums!
For the printer not recognizing the new ink cartridge that is installed, I have included two documents for you to follow. The first one is 'Check Print Cartridge Light Blinking'. Some of the steps you have already completed, please do the steps that you have not done already.
The second document is 'The Print Cartridge Detected is the Wrong Type'. Again some of the steps you will have already completed, please complete the steps that you haven't.
If you are still having the same issue after this, please let me know if the error has changed, and what lights are blinking on the printer.
Looking forward to your reply.
I worked on behalf of HP

How can I get my HP DeskJet 6540 to recognize the new ink cartridges I installed?

Hi everyone. I have an HP DeskJet 6540 printer and I replaced the ink cartridges. After I replaced the cartridges, I aligned them and then did a test print. I noticed that the blank ink didn't print. I opened system preferences, and then I opened the printer utility. It says, "Device Status : Pen Failure." Current Supplies Levels says, "The current levels for the selected printer are shown below...Cartridge on the left (tri-color 97) is unknown and the the cartridge on the right (black 96) is missing." Oh, I forgot to mention that the print cartridge light on the left side is flashing. I went to the HP support website and it says that the problem could be an incorrect print cartridge, incompatible print cartridge, or problem with the (left/right) print cartridge. The solution they offered was to remove, inspect and reseat the problem cartidge. It also said to clean the problem cartridge contacts. I did that and it still gives me the same results. I even reset the printer but still got the same results...
So the next thing I try is the OTHER cartridges listed as compatible with my printer which is 94 (black) and 95 (tri-color). I bought the new cartridges, placed them in the printer and I still got the same message from the print utility. I took the latter cartridges back and got a refund and explained that none of the compatible cartridges are working with my printer. I kept the 96 and 97 cartridges in the printer and the light on the left continues to flash so now I'm here asking if anyone knows how I can get my printer to recognize the new ink cartridges I installed? Are there any other solutions that I have besides throwing the printer out of the window? :-)
Thanks everyone ;-)

With all that you have done it does sound like the printer has a fault. If you haven't tried turning off the printer for several minutes, then this would be worth trying (maybe you have done this when you say reset the printer?).
If the cartridge light on the printer flashes when you turn the printer back on then it sounds like a hardware fault - not the driver or the operating system. And this is not usually something a user can resolve so it would need repair. And for the cost of a new printer, why would you bother.
If you plan of sticking with HP and getting another model that can use the 96 & 97 cartridges (let's face it, they often cost more than the new printer), then take the two existing cartridges to the store and see if they will let you check they are okay. No point throwing them out also if they still have a fair bit of ink still in them.

Epson RX580 won't recognize new cartridge

While this is not 'officially' a Mac problem, I'm hoping someone can help. My RX580 will not recognize the new black ink cartridge. I had this same problem in the past and someone on this board suggested removing and putting back all 6 cartridges, which cleared the problem. This time, that isn't working, after several tries. I've also turned the printer off and on, removed the printer cable and reconnected it. Epson Support has no other ideas, so are sending me a new cartridge to see if that is the problem. So I'm without a printer for a few days, unless there's anything else I can try, and then if the new cartridge doesn't work . . . ARGH! Sometimes technology makes no sense. . .

Hey Foldy,
Welcome to the HP Forums!
For the printer not recognizing the new ink cartridge that is installed, I have included two documents for you to follow. The first one is 'Check Print Cartridge Light Blinking'. Some of the steps you have already completed, please do the steps that you have not done already.
The second document is 'The Print Cartridge Detected is the Wrong Type'. Again some of the steps you will have already completed, please complete the steps that you haven't.
If you are still having the same issue after this, please let me know if the error has changed, and what lights are blinking on the printer.
Looking forward to your reply.
I worked on behalf of HP

New ink cartridges in Deskjet 5525 but black won't print or prints in light gray

I installed new ink cartridges. Black prints as very light grey or not at all in some instances

Hi @rhare
I see you are having troubles with your black ink.
Please complete all of the steps in the following document; Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages Although I hope this resolves the issue, it might not. As you have a 5525, If the issue persists, I would suggest calling HP Phone Support, even if your printer is out of warranty, as you may require a replacement printer.
The number to call HP is 1-800-474-6836 for Canada and US, or you can Contact HP Worldwide.
Please let me know if the document resolves the issue, or if you called HP and the outcome of the call. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

New ink cartridges installed

I have installed all new HP940 ink cartridges color and black. It is telling me ink is low and won't print.

Hi @NAN7541,
Welcome to the HP Forums!
I understand that your HP Officejet pro 8500 printer is saying your new ink cartridges are low and will not print on Windows 7. I am happy to help!
I would suggest to go through this guide, Fixing Print Quality Problems for the HP Officejet Pro 8500 All-in-One Printer Series (A909).
If the guide does not resolve your issue, then please call our phone support at 800-474-6836 for your replacement/upgrade options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP Officejet Pro 8500 A910 - all new ink cartridges, black and blue ink not printing?

HP Officejet Pro 8500 A910 - all new ink cartridges, black and cyan ink not printing?
Cleaned printer heads w/no luck.

Welcome to the forums @corAtrum1 ,
I read your post about your Officejet 8500 no longer printing in black and cyan ink. I would recommend that you try out the steps in the guide below for this problem.
I hope this helps!
Printer Does Not Print Black Ink or Color Ink, or Prints Blank Pages
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

New ink cartridge is not being recognized

I just installed a new ink cartridge in my np officejet pro L7580. All the ink works great except the black.

Ok, I just figured out so I´ll post it here in case someone has the same issue. I turned off my iPod while connected to the computer. Afterwards, the "other" connection showed up again in the device manager but this time it stayed there without disappearing and with the exclamation point on. I then proceed with one of the instructions in this posting to install the driver for the apple mobile which then showed up in the USB section of the hardware (it was never there until now). Bingo! I got my iPod Touch to connect for the first time! But seriously, why should it be so hard???? I'm concerned with the number of postings here. It looks as if Apple is selling the hottest toys but not be the best ones in terms of quality...

How to align with new ink cartridges, deskjet F4480

I am having trouble with my printer doing the alignment after I put in 2 new ink cartridges. The help section to align gave me instructions but they didn't work. I just downloaded/installed my printer device driver update to see if that would help. NO luck so far. Mu printer is a F4480 Deskjet

Hello @huidel,
Welcome back to the HP Support Forums! I see you are trying to align the cartridges on your HP Deskjet F4480, you have tried following the steps and updating the driver with no success.
1. What is your current Operating system, Windows or Mac and which version?
2. How did you install the DJ F4480, using the software CD or download?
Click here to download and run the HP Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
I look forward to hearing from you!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

My eprinter will not print in proper clolour even after new ink cartridges install cleaned nossles p

my eprinter will not print in proper in colour even after new ink cartridges installed cleaned nossles as new cartridges still not printing properly
This question was solved.
View Solution.

Which printer do you have specifically? HP makes several eprinters and I want to make sure I get the best information for you that I can.
Also, have you tried doing a self test print to see if the issue is hardware related versus being software related?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Itunes won't recognize new credit in Itunes

itunes won't recognize new credit in itunes store and goes straight to billing page so I cannot purchase anything; also play button won't activate when in itunes stor. Susanne

Hi Chris
Thank you for your help sorry it has taken me so long to reply to you.
I solved my problem with Itunes gift card after many frustrating hours. I went to purchase another song it did the same thing as before (went straight to the billing page) but this time I hit a credit card icon it asked me to bring up details; I deliberately entered wrong numbers so forth and so on. I deleted all the credit card details and hit NONE and I found I could then exit the page. That action seemed to trigger a correction for purchase; and I could then download without too much trouble.
Cheers
Susanne A

I put in four new ink cartridges, now photos are dripping with ink, literally dripping.

My ink was low so I put four new cartridges in - Photo, Cyan, Magenta, Yellow. Using HP Advanced Photo Paper Glossy, and photos are dripping with ink. Please advise.
This question was solved.
View Solution.

Four new ink cartridges caused my photos to drip with ink.

MX472 won't recognize new ink cartridges code 1401

Similar Messages

Maybe you are looking for