MX710 - I can print but I cannot scan

I just got a new Mac and cannot figure out how to set up scanning.  I am using MP Navigator EX to scan and it does not recognize the scanner.  Wireless printing is working just fine though.  
In the Printers/Scanners tab, it shows the Canon MX710, but hangs there when I try to scan from that application.
I am pretty sure it is an "order of installation of drivers" thing, but I can't seem to figure this out.  
Any assistance is appreciated.
Solved!
Go to Solution.

I found the solution:
In the MP Navigator MX software, click on preferences and in the Product Name drop down, selecting 'MX710 series Network', rather than 'MX710 series'.

Similar Messages

  • Xsane and Photosmart C4280 I can print but don't scan

    hey,
    after some problems with hplip i'm finally able to print, but when i try to scan i get only this reply
    scanimage: open of device hpaio:/usb/Photosmart_C4200_series?serial=MY79LMM3DT04VP failed: Device busy
    scanimage -L shows the scanner
    device `hpaio:/usb/Photosmart_C4200_series?serial=MY79LMM3DT04VP' is a Hewlett-Packard Photosmart_C4200_series all-in-one
    "sane-find-scanner", too
    found USB scanner (vendor=0x03f0 [HP], product=0x5c11 [Photosmart C4200 series]) at libusb:005:002
    i already tried
    #If you want to use this driver with sane: # echo "hpaio" >> /etc/sane.d/dll.conf
    but it doesn't work, so what can i do, or what do you need know further?

    See my reply here: http://bbs.archlinux.org/viewtopic.php?id=65431
    And wasn't hpaio something deprecated?

  • "I can only print but I cannot scan from my CM1015/CM1017 MFP in Windows 7. What do I do?"

    This product series does not have a product-specific driver for Windows 7. Some HP product software created for the Windows Vista operating system can be run on a Windows 7 PC in compatibility mode to enable product software functionality. There is a support document with instructions on how to do this for the HP Color LaserJet CM1015 and CM1017 Multifunction Products (M.... This is considered the best driver option in Windows 7 for these product series. 
    Regards,
    affableLJ
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution
    I am an HP employee!

    Try downloading the drivers from hp.com instead of using the disk. Also before you do another install, make sure you have uninstalled all previous attempts, deleted all drivers from your download folder and recycle bin, and rebooted your computer.
    Once you have downloaded the drivers from hp.com, make sure you follow the steps in the document. There is a twain/scan driver that has to be marked.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • I can print from my Canon ir3080 to my MacBook Pro, but I cannot scan from the Canon printer to the MacBook. Suggestions?

    I can print from my Canon ir3080 to my MacBook Pro, but I cannot scan from the Canon printer to the MacBook. Suggestions?

    Contact Canon.

  • Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help .  regards Cindy

    Hi can anyone help me. I have a apple macbook laptop OSX 10.5.8 . When i push print, it shows my printer but says cannot communicate with printer. (epson stylus nx125). Do I need new drivers? Please help .  regards Cindy

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Some basic printer troubleshooting steps before worrying about a printer driver:
    1. Have you tried turning the printer off and back on?
    2A. Is the printer attached with a cable?
         If yes, have you tried unplugging and re-plugging both ends of the printer cable?
         If that does not help, can you test the printer with another cable?
    2B. If your printer is not connected to the computer with a cable, have you tried restarting your printer (assuming wireless connection)?
         Have you tried restarting your wireless router?
    3. Have you tried restarting your MacBook? (Be sure to save your work first.)
    4. Does the printer have ink? (Doesn't usually generate a 'communications error' though)
    5. Have you updated OS X or the program you're trying to print from recently?

  • I can print but can't scan

    I have a HP Officejet Pro 8500A.  I can print but I can't scan.  I am running windows 7.  I am attempting to scn by clicking on the icon.  When I click the icon, I get this error message:  "The HP Officejet Pro 8500 A 910 was not found".  Please help. 

    MurryLaw
    Welcome to the HP Community Forum.
    Icons are nothing more than links to programs -- and a link is a pointer, not an actual program.
    It may be that the printer software is not working properly or that the Icon you are using is just not connected, that is, pointing to -- anything useful.
    You can perhaps correct the whole mess by installing (reinstalling) the Full Feature Software for the printer.  The installation process may take care of the broken Icon and whatever else is going on elsewhere that is keeping the scanning function from working properly.
    General Instructions to Install the Printer Software
    Reminder:
    In most cases, the Solution Center has been replaced by the Printer Assistant.
    The Printer Assistant shortcut will be installed on your Desktop during the last part of the installation.
    Windows Operating System:
    Create Restore Point:   Create a Restore Point – Win7 OR  Create a restore point Win8
    Open HP Drivers & Downloads
    Enter your Printer Model information
    Select your Printer from the “Results” list
    OR
    Open HP Officejet Pro 8500A e-All-in-One Printer series - A910
    Enter your Operating System in the Drop-down menu
    Click NEXT and Scroll down
    Look for category Driver - Product Installation Software
    Select the Basic Driver, e-print, or Full Feature Software
    Save the *.exe installation package(s) on your computer
    The file(s) will likely save to the "Downloads “folder.
    Be sure to look for Updates as needed for your installation. If available, you may download the Print and Scan Doctor and / or other programs from Category – Utilities.
    If you have ‘Admin’ control, you may highlight the package and “double-click” to install it, else Right-Click, Select run as Administrator and install.
    NOTES: 
    Look at the bottom half of the main webpage for your printer for helpful videos to assist with the installation of the printer software!
    Scroll the video list back and forth until you find the video that most closely matches your situation.
    If using a USB connection: Download and install the driver software before connecting a USB cable.
    Ethernet: Connect the printer to the network and (Optional) assign the printer an IP address at the router. Once the printer is connected to the network, be sure the printer is switched on and then install the printer software.
    After the initial installation is complete and working, check / install Category - Update
    There is valuable information at the support website, including sections for Manuals, Troubleshooting > How-to, Troubleshooting > Solve a Problem, plus alerts and notifications for your printer.  Be sure to take an extended look at what is available.  Bookmark the page.
    Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
    Click Accept as Solution when the Answer is a good Fix or Workaround!
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan.  Anyone out there know what to do with this?

    I just hooked up my Canon MP830 printer/scanner/fax to my MAC and can print but can't scan.  Anyone out there know what to do with this?

    Have you downloaded the approriate Snow Leopard drivers for that printer? Make sure you get the appropriate and latest MP Navigator, as you start scans from the computer, not the all-in-one.  Get them from http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp830#DriversAndSoftware

  • HT1338 I have updated my new MacBook Pro for HP Photosmart All-in-One, but it still will not scan - it will print, but will not scan. How can I fix this?

    I have installed the updates for my HP Photosmart All-in-One c309a.  It prints, but will not scan.  Tells me to update - I did that, but still won't scan.  Any suggestions to make the scanner work?
    This all worked perfectly with my old 2008 MacBook Pro.

    Have you tried scanning from Image Capture or Preview?
    A current driver is shown to be available for Mavericks (auto-downloaded):
    http://support.apple.com/kb/ht3669#HP
    But many people have found that manufacturer scanning control software doesn't work. They have to use the Apple-provided software.

  • Just installed my B110a works ok for normal wireless printing but i cannot print apps and on ePrintc

    Just installed my B110a works ok for normal wireless printing but i cannot print apps and on ePrintcenter is says NO CONNECTION, how do i solve this?

    Hello schmittl,
    Please let me take a moment to say "Welcome" to the HP Forums.
                                            I hope you enjoy your experience!
    I see that you are having an issue when it comes to scanning to the computer.
    The error that appears when attempting to scan is accurate. I suggest that if you are using a anti virus protection or firewall, you disable the protection and reboot the computer and the printer and attempt your scan again.
    With the anti virus and/or firewall disabled, please fun the HP Print and Scan Doctor once again as well.
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thank you for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • TS3276 I have my email set up, I can send, but I cannot receive mail.  What could be wrong ?

    I have my email set up, I can send, but I cannot receive mail.  What could be wrong ?

    SMTP is the protocol used to send mail, where IMAP and POP are the protocols used to receive mail.  ISPs can have different servers for these protocols. 
    In this case, the specified receiving (IMAP or POP) server, or the receiving user and password credentials, are likely incorrect.
    What does the Connection Doctor diagnostic tool report?
    Mail.app's Window menu > Connection Doctor
    To check or change the settings, select Mail.app's Mail menu > Preferences... > Accounts and select the account you need to edit in the left column.
    The receiving information will be displayed for the selected Account, with either POP or IMAP shown.  Confirm with the ISP that your POP or IMAP mail settings are correct per the ISP's recommendations, as well.   And in general, IMAP is preferable to POP, if you have the option of using either of those with your ISP.

  • I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

    I cannot send some emails, I can reply but I cannot start an email, an error comes up in outbox stating 'does not allow relaying' please help?

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • I have an old MAC using OS 10.5 (does not have Intel processor). I need a new printer, but i cannot find one that will work with such an old operating system. Is there a new printer that will work with this old system?

    I have an old IMAC using 10.5, and it cannot use any newer operating system. I need a new printer, but I cannot find one that is compatible with this old system.
    Is there a new printer out there that will work with 10.5?
    Thanks,
    Niles Stroh

    Canon Pixma iP4950 works great with my PPC G5 iMac on Leopard. Maybe other of their models do as well.

  • In Photoshop Elements 12 I can print but not scan..error message "Cannot find Wia compliant device".  It can find the device or else it wouldn't print.  How do I get it to scan??

    I have tried everything to get the program to see my printer.  By reinstalling divice drivers for printer to reinstalling program several times.  Still I can print from my printer but not scan. Any help would be appreciated.

    Hi,
    Thanks for the update.
    If you can scan with the HP software then at least we know the system can see the scanner.
    Can you try the organizer to see if that works any differently. Once you load the organizer, go to the Edit menu and select Preferences -> Scanner - see if that sees it.
    Since you are on Elements 12, you still have the twain option available to try. See the following document which describes moving the twain driver.
    https://helpx.adobe.com/photoshop-elements/kb/twain-installed-photoshop-elements-11.html
    Brian

  • HP Photosmart 7510 - I can print but not scan

    Hello,
    I bought my HP Photosmart a few months ago. It worked fine, and I could print wirelessly from my desktop to the printer, and I could scan from the printer to the desktop computer. In fact, last week I was able to scan.
    Today, I wanted to scan something, and I could choose my computer in the list, but got the message that I needed to connect my computer to the printer. I checked what might be wrong, but everything looked okay. I downloaded the scan doctor, and received the message that DeviceSetup.exe could not be found. Which is odd, because when I look in the map, the file is there. I then rebooted the printer, which didn't work. Then I tried to reinstall the drivers on the hp website for my printer, but again got the message that DeviceSetup.exe could not be found.
    Next, I removed the printer completely from the computer, reinstalled, and still had the same issue. Except this time in the list to scan to a computer, my desktop is no longer there and I get the message that "on windows, scan to computer will automatically be activated" (I'm translating from Dutch, so in English it could be slightly differently worded). 
    I retried the scan doctor, and this time I received the message that DeviceSetupLauncher.exe couldn't be found. Again, this is in the directory where it should be. I can see it in the map, but when I click on it, I again get the same notice!
    Needless to say, I'm at a loss as to what I could do to fix it. The file I need is right there, but my computer acts like it's not. I'm a student and really need my printer. So I'd be very grateful for any advice on how to fix this problem!
    Thanks in advance!

    Hi,
    For Windows 7 and Windows 8 machine, please keep the printer connected, download and run the following tool:
       http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe
    Can you see HP Scan when click Start (Windows 7) ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I can print but I can't scan with my air express ?

    like I said I can print fine but I cant scan using airport express why ?

    Only the print function is supported at the USB port of the AirPort routers.  Advanced features like copy, maintenance, scan etc are not supported.
    If you need these options, you will need to connect your All-in-One directly to the USB port on your computer.
    Reason....printer manufacturers have not provided full function network USB drivers....so far.  You might want to lobby your printer manufacturer if you would like to see this type of USB functionality from them.
    If your All-in-One can connect using wireless only, or by wired Ethernet connection to the AirPort router, all of the features will be available to you.

Maybe you are looking for

  • Error while creating new project number

    Hi Folks, I am getting the below error while creating a new project number. "Oracle Projects failed to generate unique project number. Please contact your system administrator to setup the next number field for automatic project numbering in implemen

  • PO_HEADERS_V return null rows

    I want to make a report but problem is this when i query to PO_HEADERS_V. It shows null rows.

  • Error while installing SAP ERP 2005 SR2

    Guys, Pleas ehelp me solve this error. I checked OSS Notes and implemented few, but no solution yet. Thanks. ERROR - Filename - SAPAPPL2.log G:\usr\sap\PD1\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080529124730 G:\usr\sap\PD1\SYS\exe\uc\NTI386\R3

  • Desktop software and blue tooth connection for text messaging

    Hello, I'm a new Blackberry Torch user and have really gotten used to using the desktop software that came with the Nokia phone I had previously. I assumed that Blackberry would have the same or better desktop to phone compatibility, but have found t

  • Apps installed on the iPhone cold not be determined

    I searched my question, but never found an answer.  How can I fix this?  Apps installed on the iPhone could not be determined.