MX711 - Prints fine for the first few jobs then prints with no ink

Pixma MX711
- Prints fine for the first few jobs
then after 10 minutes or so it prints but no ink is on the page.
I replaced the ink cartridges and did all the nozzle clean, priming, alignment etc.
Questions.
1. What is the process to do a factory reset?
2. Any other troubleshooting steps I can do myself?

Hi tda43,
Performing a factory reset of the printer will likely not resolve the issue of the inks not printing; however, you can perform the following steps to reset the settings of the printer:
1. Press the MENU button.
2. Select SETUP, then press the OK button.
3. Select DEVICE SETTINGS, then press the OK button.
4. Use the arrow buttons to select RESET SETTING, then press the OK button.
5. Use the arrow buttons to select SETTINGS ONLY, then press the OK button.
6. Press the HOME button to return to the main menu after the settings have been reset.
When inks do not print correctly, we recommend performing at least one cleaning and two deep cleanings on the printer to try and get the ink to print. If you still experience difficulty, the printer will require servicing. Please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option).

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

My macbook pro loads webpages fine for the first few minutes but after that the internet freezes and will not load anymore webpages. What can I do to fix this?

I let Firefox sit on my desktop for about five minutes, and it finall allowed me to use it. That is EXTREEEMELY slow. What is the problem?

Itunes freezes on my mac mini?? its okay for the first few minutes then freezes. i just then get the colour wheel and have to 'force close'

hi there, i have major problems with itunes freezing on my mac Mini, its okay for the first minute or two then it freezes and i get the spinning colour wheel and i have to force close.
can anyone help?

I suspect that you'll have to mount that volume at boot time and not at login time as you're doing now. If you can arrange that, then the volume should be available to all users.
Unfortunately, there doesn't seem to be an easy way to do a boot-time mount. I tried searching for "mount drive startup mac" (without the quotes), but most of the results described how to mount a volume at login time. Ignore any advice that mentions "Login Items".
I did find this discussion, but it's very sketchy. You also have to be careful that any advice you find applies to the version of OS X that you're using.

The sound was lost suddenly while listening to a pre-aired program on National Public Radio that I accessed from a link from an email from my sister. Everything sounded fine for the first 10 minutes then the sound from the 4S iphone speakers just stopped.

I lost the speaker sound suddenly while listening to a previously aired radio program. Cannot hear any sounds on my Apple 4S iPhone since it happened. Cannot even hear Siri anymore. Can only hear any sound at all using my ear buds. No speaker sound whatsoever. Any suggestions? I've already restored the whole system using iCloud as my backup. I've also rebooted the phone several times. The sound functions well using headphones (which i was not using when the speaker sound all of a sudden stopped working in the middle of the program). I tried cleaning any debris from the speaker and other crevices using a toothbrush and have tried blowing any debris out too. I pressed up on the charging dock using a pen and tapped on the speaker side to dislodge any debris. I even stuck my phone in a plastic bag and put it in the freezer as someone suggested. Any other ideas? I even deleted an app to free up some space. Any other suggestions please?

it's a hardware issue read more here
https://discussions.apple.com/thread/1343532?start=315&tstart=0
and here
https://www.google.dk/search?q=iphone+stuck+in+headphone+mode&oq=iphone+stuck+in +&aqs=chrome.3.69i57j69i65j69i61j69i59j0l2.4192j0j7&sourceid=chrome&es_sm=93&ie= UTF-8

My LG G3 has stopped receiving email from my pop3 road runner account. It just has an "updating" message. It worked fine for the first two weeks and nothing now. Any advice?

My LG G3 has stopped receiving email from my pop3 road runner account. It just has an "updating" message. It worked fine for the first two weeks and nothing now. Any advice?

This started about 3 days ago. I could manually push email through in the last few days but can no longer. I have deleted the account and re-entered the settings but I get a message that I cannot connect to the server.

My I tunes jumps for the first few seconds of the track.

ITunes is jumping for the first few seconds of the track. It doesn't happen to all tracks but most of them. Anyone got any ideas.
Mark

Skipping around track change can be associated with certain virus checkers especially NOD32. Try briefly disabling virus checking. If it cures the problem, exclude iTunes Library.itl and iTunes Music Library for checking.
Is Disk transfer set to DMA rather than PIO see video playback article.
http://docs.info.apple.com/article.html?artnum=303706
Otherwise there are general performance issues, is your computer short of memory? Are you playing music over a wireless network/ external disk?
ALso you can get funny effects from Cross Fade. Try turning it off in Preferences>>Playback if you are using it.
That's about it from me, this can be a difficult one.

Hey my little sister pressed something on my ipod and ever since some o f my songs are playing only for the first few seconds how do i solve this problem

hey my little sister pressed something on my ipod and ever since some o f my songs are playing only for the first few seconds how do i solve this problem

BaconBits is right to ask if the files are protected or not.
DRM files can only be transferred using Windows Media Player, Creative MediaSource or Nano Media Explorer so that the licenses are transferred. Do not try drag'n'drop with Windows Explorer on porotected files. This is explained in the Help file manual on your CD.
Also do not use Audible Manager to transfer music files.
PB

My Iphone 4 just updated to the iOS6. I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto. However, although Iphoto recognized my phone, it shows no photos to upload or backup. ??

My Iphone 4 just updated to the iOS6. I've connected it to my computer for the first time since then, and wanted to back up my photos in iPhoto. However, although Iphoto recognized my phone, it shows no photos to upload or backup. It lists my phone in the "devices" category on the left bar, but no longer shows any of my photos.
Does anyone have any suggestions?

I've reread your question several times and am not sure I understand it.
Are you trying to basically start over, as if you just took your iPhone out of the box? If so, do:
Settings > General > Reset > Erase all content and settings

I just bought a Shuffle for my wife. I have a Touch. When I plugged the Shuffle in for the first time it sync'ed with all my Touch stuff and filled up. I have created a playlist that I would like to install on the Shuffle. How do I keep the Shuffle from s

I have a Touch. It sync's automaticly when I plug it in. I like this.
I bought a Shuffle for my wife today. I want to put a playlist on it. When I plugged it in for the first time, it sync'ed with all my Touch stuff and is now full.
How do I empty the Shuffle.
How can I plug the Shuffle in if it automaticly fills up with my Touch stuff?
I have windows xp.
Thanks,
Jeff

Some apps that you download on your iPhone may possibly be to new for the iPod touch 2nd gen. I have a iPhone 5 and a iPod touch 2nd generation myself. If you plug his ipod into iTunes and restore it from a backup of your iPhone than it will download the paid apps and music that are compatible with his ipod. Hope this helps.

I plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

i plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?

Try restoring from the backup created at the beginning of the sync process:
Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
Select Restore from backup, choosing your most recent backup to restore from
Disconnect your phone and confirm that your photos are back
Go back to iTunes>Preferences>Devices and re-enable automatic syncing.

I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

I just purchased an ibook for my mac for the first time and it started with two pages then switched to one with notes and i can't change it back. Anyone else having this problem?

Up the top where the three buttons are (red yellow green) are three images. Click on the third image that looks like a notepad (not the first which is a library book), and that should get rid of 'Notes'. To read using two pages make the window bigger.

Setting up a Time Capsule for the first time and replacing it with an existing Router

Hey there,
I have got a new TC which I will be setting it up for the first time. I have a very old beetle router. I would be using the TC as a wireless hard drive and also as my WiFi Router. After reading the setup guide, I am confused about which option to choose. Moreover, available references on the internet do not provide any clear-cut solution.
My basic aim is to replace my router with the TC and use its in-built WiFi hardware. Since I have an EPSON printer which is connected to my router wirelessly, I am not willing to change its settings. Please guide me which option to choose regarding the same.
Thanks in advance

Since you have a modem/router, you must continue to use the Beetel modem/router on your network.
The Time Capsule can connect to the Beetel modem/router using a wired Ethernet cable connection and produce a separate wireless network. You would NOT want the Beetel router and Time Capsule to both try to produce the same wireless network if they are located close together, since this will likely create interference problems that may prevent devices from connecting to either the Beetel orTime Capsule wireless network.
The exception to having the Beetel modem/router and Time Capsule produce the same wireless network would be if you can locate the Time Capsule at least a room or two away from the Beetel modem/router. An Ethernet cable can be run up to 300+ feet or about 100 meters with no signal loss, so you should be able to locate the Time Capsule anywhere you want.
Are you able to consider this option?
Another option.....if you cannot locate the Time Capsule in another room......would be to configure the Time Capsule to use the same wireless network name and password as the Beetel network and turn off the wireless on Bettel modem/router.
Important.....there is no guarantee that the printer will be able to connect to the Time Capsule wireless network, so you should expect to start over and set up the printer again.
Yet another option would be to turn off the wireless service on the Time Capsule and use the Beetel wireless to back up your computers to the Time Capsule, which will act as a wired hard drive for the network. If you select this option, the Time Capsule can be located close to the Beetel modem/router.

Airplay stutter for the first few seconds

Hi
I just bought the new airport express. It is connected to my hifi with a spdif cable. Problem is, when i stream music it stutters the first 3-4seconds(as if it tries to buffer or something). I've streamed music from PC, Ipad, and iphone.. all with the exact same problem. My friend has the old airport express, and it doesnt have any problems at all . It is very annoying!
plz help

Hi - I am assuming that your setup is correct because it is working - otherwise it wouldn't be working at all - it is normal to have a slight delay but 3-4 seconds with a stutter is unusual - I consulted with my son who has 5 sets of speakers on his Airplay setup and a lot of experience with it and he didn't have any reason why it is occuring - under these circumsatances, I recommend a factory reset and re-configure from scratch - sorry I couldn't have been more help.

I bought my photoshop elements 10 box from Costco and I entered in the serial number for the first disk. Then, I removed the disk and put in the second one. I entered it in again, but it said that it was an invalid number. It worked on the first disk, but

It keeps saying that it is invalid for the second disk, but the first disk worked fine!

See if this sheds any light:
FAQ: Installing Elements 10, or What do all these disks do?

MX711 - Prints fine for the first few jobs then prints with no ink

Similar Messages

Maybe you are looking for