Mx922 confused- pc and mac environmant

mx922 installation was difficult.    set up the pc - ok - can print and scan.    set up the mac- had to fight with it- then 3 hours later just posp up.   can print from mac, not from pc.
reset printer - can print ffrom pc- not from mac.
rest again- scans from pc great- faily quick.   Print from pc- printer sounds likeit has having digstive issues for two minutes (I tiemd it) - then doesnt print page.   page is not in queue.
been fighting this for a week, unless i can fix this in rwo days it goes back - open to suggerstions.
Len

Hi lenkearney,
To try and resolve the issue, we will want to ensure that the printer has proper wireless communication occurring. For proper wireless communication to occur, it is important that network devices are suitably located. Please ensure the following:
1. The printer and the access point are located within the wireless connectivity range with no obstacles between them.
2. The distance between the printer and the access point is not too far. If they are too far, move them closer together.
3. There is no barrier or obstacle between the printer and the access point. In general, connection performance decreases for communications through walls or between different floors. Adjust the locations to avoid such situations.
4. There are no sources of radio interference near the printer and the access point. The wireless connection may use the same frequency band as microwave ovens and other sources of radio interference. Try to keep the printer and the access point away from such sources.
5. Check if the radio channel of the access point is close to that of other access points nearby. If the radio channel of the access point is close to that of other access points nearby, the connection performance may become unstable. Be sure to use a radio channel that does not interfere with other access points.
Once these items have been verified, if you still experience difficulty, please call or email us using one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • I recently purchase an ipad2.  I also have a mac laptop.  Now, when I facetime call using my iphone to my ipad2 or mac, it states busy.  how can i fix this problem?  I have the same apple id e mail for both ipad2 and mac.  it might be getting confuse now.

    I recently purchase an ipad2.  I also have a mac laptop.  Now, when I facetime call using my iphone to my ipad2 or mac, it states busy.  how can i fix this problem?  I have the same apple id e mail for both ipad2 and mac.  it might be getting confuse now.  I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling.  Thanks.

    thanks.  your answer was correct, clearer.  I have another question, maybe you can answer.  I just purchase my ipad2 2 days ago.  yesterday, there was a sound.  today there is no sound.  there is a sound only in movies and you tube and music.  but no sound on all apps and keyboards.  I look it up and seems like ther are few that have this problem.  I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that.  I tried rebooting it and still won't work.  Should I just restore it?

  • IWeb and .mac confusion

    I was hoping someone could enlighten me on the difference between these two URL's:
    http://web.mac.com/twood20/iWeb/Site/NYC.html and
    http://web.mac.com/twood20/iWeb/Videos/Our%20Day%20at%20Boomers.html
    and how they relate to my .mac homepage. I created and published these two files in iWeb but on two different Macs.
    When I sign in to my .mac homepage under "My Pages" I have two links.
    The URL's for those links are
    http://web.mac.com/twood20/iWeb/Site/Disneyland%202006.html and
    http://web.mac.com/twood20/iWeb/Site/UK%20Soccer%20Camp.html
    obviously neither of these URL's match the two URL's I first spoke about.
    However, from within iWeb I can see and visit many of the other pages/sites that I've built. If I type the URL http://web.mac.com/twood20 then it takes me to yet another page/site that I built(which incidentally, when I type in the URL and hit enter the URL changes to http://web.mac.com/twood20/iWeb/Site/NYC.html
    I guess to make a long deal short, I don't understand how iWeb and .mac work together in order for me to publish any or all of the pages/sites I want to make sure get published. If anyone has some useful information for me so that I can get all of my pages/sites published that would be great. Thanks in advance.

    First take note of iWeb's Help viewer advice about naming your web pages:
    Browsers convert spaces in site names to "%20." To avoid these symbols, use an underscore, hyphen, or some other character instead of a space. Also avoid non-Roman characters; many get converted to numbers when you publish.
    Other characters aren't recommended for use in website names, including: forward and backward slashes (/ \), brackets ([ ]), tilde (~), exclamation point , question mark (?), "at" sign (@), number sign (#), dollar sign ($), ampersand (&), asterisk (*), colon (:), equal sign (=), comma (,), and double quotation marks ("). Using these characters may result in names with strange numbers in them.
    Also take a look at this Apple document:
    Publish to your .Mac account from more than one computer...
    http://docs.info.apple.com/article.html?artnum=303045
    In general the format of your URLs is this...
    http://web.mac.com/twood20/iWeb/OneOfMySites/APageWithinThatSite.html
    I'm not sure what the significance is of the pages listed in "My Pages" on .Mac, when or why that list is updated and, anyway, only you will see that list. What really matters is when someone types in your site name, does it go to your site? I suggest you clean up your page names to avoid the %20's, read that Apple document, then if you still have a specific question post back here.

  • Sharing files between users and macs

    My husband and I share an iMac. I have a MBA for traveling and my husband a PC laptop (though he rarely uses for private stuff). We both have iPhones.
    We are looking for a way to:
    - Share our photos (we don't use iPhoto) and some files. We would like to have this in one shared folder, that we can access from both accounts in the iMac, the MBA and ideally (though not a must) the PC and iPhones. We would both need to have admin rights to edit documents, etc.
    - Have access to all the information in my account on the iMac from the MBA. Ideally, same thing for his and the PC.
    - Have access to all the data remotely when traveling.
    - Have all the data backed up locally (we already have a cloud backup, but we'd like to have a local backup too as it's easier and quicker to access)
    We have read a lot about configuration, NAS, time capsule... but we get more and more confused, as we are obviously no tech experts.
    Dropbox is not our preferred choice. We already have a cloud backup system. We'd rather have the files stored and accessed locally for everyday use.
    Using a NAS to store shared folders and backup the rest sounds good, but they either seem very complicated to set up, or they have mixed reviews in terms of stability, especially to access files remotely.
    Timecapsule seems easier and more straightforward, but I'm not sure it would solve the "sharing files between users and macs with admin rights"? It seems to be more focused on backing up the main drive and then providing access to the backed up files. (Though I might be completely mistaken!)
    We just can't manage to have one shared folder between both accounts in the iMac. We need to grant admin rights document by document. We don't manage to make it work automatically so we both have one folder to access with full rights for all the contents inside it. And this seems to me like something that should easily be done...?
    Any help, advice, proposals... would be greatly appreciated!!!

    Move any file you want to the other user to access to the Shared Folder. Anything you put in that folder is available to all users.
    The shared folder is here:
    Macintosh HD > Users > Shared

  • Can I use Photoshop on both my windows and Mac PC's

    I purchased Photoshop CS5 in May for my Windows PC.  I also want to install it on my Mac, However the download they provided me with doesn't have a Mac version.  Can I get Adobe to provide me with a cost free Mac version?
    I bought Lightroom 3 and was able to get both versions and have it running on both PCs...want to do this with CS5...

    Michael Riordan wrote:
     A user would need 2 licenses of Photoshop to run on their Mac and their PC, even if they had a mac and wanted to run windows on that hardware set, they'd still need separate licenses for the PC side and the Mac side.
    You are confusing hardware and operating systems.
    If you are running the Windows OS on Mac hardware, you are running Windows.
    comtsguy01 wrote:
    ...then when logged on in the Windows mode, I could install my Windows based verison of CS5 with my Windows based serial number and it should work...right?
    Yes. That will work fine.

  • Sharing FCPX Pro Res 422 .mov master file with both Ps and Macs

    I'm using FCPX 10.1.4 on Mac OS 10.10.2. I want to put a FCPX Pro Res 422 master file on a data DVD so it can be read and poled on both a Mac and PC using Quick Time 7. I tried using Toast 12 to create a data DVD playable on both a PC and Mac but it would not open on the PC. Any ideas what the problem might be or an alternative way to do this?
    Thanks

    One additional possible point of confusion: I think you wrote (or meant to write)  "so it can be read and played."
    A playable DVD is a very specific standard of filenames & compression sufficient to fit a two hour movie into 4.7GB of standard def video.  Simply writing any video file onto a disc (maybe marked as "DVD-R") never creates a DVD that is playable in standard DVD players.
    Given that, you can transfer any file (up to 4.7GB) by writing it onto a data "DVD" disc.  However, as others point out, ProRes isn't windows-friendly (or good for small files) and just for seeing the video on other platforms, H.264 would be the right choice.

  • Can't Get MacBook Pro and Mac Pro to Network

    I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
    Thanks in advance for any ideas you might have on  how to fix this.

    I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

  • Want to use a Lacie External Hard Disk with Windows and Mac? Can I?...

    Hi, I've just purchased a Lacie Extreme D2 external hard disk, I'm looking to use it to move film clips from my Mac G5 to my Sony Vaio laptop. I'll connect the Mac using Firewire 1 and the PC using USB 1.
    I understand there is an issue with setting the compaitibility of the hard disk to either Mac or Windows format but I'm wondering if I can set it to both, so it's possible to transfer these files? The hard disk is Windows and Mac compatible but does it have to be partitioned a certain way?
    Any help is much appreciated.
    Thanks,
    Alex

    Format the drive as FAT or use the Mac format (HFS Extended) and install MacDrive on the PC.

  • My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?

    I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that  are causing the problem.
    I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
    Kernel Extensions:
              com.oxsemi.driver.OxsemiDeviceType00          Version: 1.28.7
              com.rogueamoeba.InstantOn          Version: 6.0.2
              com.rogueamoeba.InstantOnCore          Version: 6.0.2
              com.Cycling74.driver.Soundflower          Version: 1.5.3
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
                 [not loaded] com.adobe.fpsaud.plist
                 [not loaded] com.adobe.SwitchBoard.plist
                 [not loaded] com.bombich.ccc.plist
                 [not loaded] com.dymo.pnpd.plist
                 [not loaded] com.intego.BackupManagerPro.daemon.plist
                 [not loaded] com.micromat.TechToolProDaemon.plist
                 [not loaded] com.microsoft.office.licensing.helper.plist
                 [not loaded] com.orbicule.witnessd.plist
                 [not loaded] com.sierrawireless.SwitchTool.plist
                 [not loaded] com.stclairsoft.AppTamerAgent.plist
                 [not loaded] org.macosforge.xquartz.privileged_startx.plist
                 [not loaded]          pcloudd.plist
    Launch Agents:
                     [loaded] com.divx.dms.agent.plist
                     [loaded] com.divx.update.agent.plist
                     [loaded] com.epson.epw.agent.plist
                     [loaded] com.lacie.raidmonitor.daemon.plist
                     [loaded] com.lacie.safemanager.daemon.plist
                     [loaded] com.micromat.TechToolProAgent.plist
                     [loaded] com.orbicule.WitnessUserAgent.plist
                     [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
                 [not loaded]          .DS_Store
                     [loaded] com.adobe.AAM.Updater-1.0.plist
                     [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                     [loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
                     [loaded] com.divx.agent.postinstall.plist
                     [loaded] com.google.keystone.agent.plist
                     [loaded] com.propaganda.dejavu.dvmonitor.plist
                     [loaded] com.valvesoftware.steamclean.plist
                     [loaded] com.zeobit.MacKeeper.Helper.plist
    User Login Items:
              iTunesHelper
              Synergy
              TomTomHOMERunner
              Dropbox
    3rd Party Preference Panes:
              Déjà Vu
              Flash Player
              Flip4Mac WMV
              GR-55
              Paragon NTFS for Mac ® OS X
              Perian
              Printopia
              TechTool Protection
              Witness

  • HT204291 Airplay mirroring. Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions

    Airplay mirroring.
    Macbook 2012 retina display. Unable to see desktop on television, audio works perfectly. Both OS on ATV and Mac are running latest versions.
    Firewall set correctly (allow incoming...)
    When I click mirroring to turn it on, teh Apple TV screen goes blank (from its home setting)
    Any help appreciated.

    Hi!
    I figured it out! It was a firewall issue.
    I use Handsoff and I checked it before i wrote here. There was no "user defined rule" that denied the communication but when i changed to "All rules" the program displayed several rules regarding AppleTV and its IP.
    So if anybody has the same problem make sure you see all rules of your firewall and get rid of the AppleTV related rules generated by the program itself. You dont need to update to the latest iOS on the AppleTV!
    I hope that I can help some people with this info to fix the problem.

  • Flash (is it for me?), Wacom Cintiq 22HD, and Mac Mini

    I have Flash as part of the CS6 Master Suite, which I purchased primarily for InDesign, Photoshop and Premiere, but as yet I haven't opened Flash. I'm hoping someone here can save me time by advising me whether Flash is suitable for my purposes. I'm not a professional, just a keen amateur, but I do want to use quality software and equipment to do the finest job I can.
    Answers to a previous post in the Illustrator forum (Re: Animation – is Illustrator what I should be using?) suggested that I try Flash.
    Background
    I'll be using Premiere for converting my audio-visuals to HD format. Back in the 1980s I was right into three-screen slide shows. As part of the transforming, I'll be introducing a small number of video clips (hence my need for Premiere) and also short animation sequences, probably 10 seconds at most. The animation will be done by an artist friend who is keen to extend his talents into computer art. If I buy the computer (some sort of Mac), a Cintiq, load the appropriate software, and then loan it all to Steve and show him how to use it, he'll happily spend as much time as required for the animation. We're bartering: he gets to use a computer and tablet for as long as he wants, I get animation.
    A typical animation might involve Steve drawing outlines at appropriate intervals, over a background, then having the software generate the in-betweens. Watercolour-style shading (i.e. not fill-type, monotone colour) would be added, probably manually for each frame, unless the tweening can competently handle watercolour-style shading. For some of Steve's doodlings on his iPad (simplified versions of what we're aiming for), check out http://www.mediafire.com/download/sj731c17co55g5w/Steve's_iPad_Work.zip
    We're both new to this and recently spent an afternoon together looking at videos on Flash and the Cintiq. The combination looks like it will work for us, but I have a few questions which I'm hoping some of the experts on this forum can answer. A simple yes or no may save me hours of reading documentation only to find out that something won't work as I want. I'll also include some questions about the Cintiq and Mac Mini in case someone who uses them with Flash can provide answers. I live in a place where I have no access to these devices before I buy. I have to buy 'cold'. Thus my wariness.
    Please note: I'm not an artist and Steve isn't computer literate. So some of these questions might appear pretty dumb to an experienced user of Flash/Cintiq.
    Ques 1
    Is Synfig Studio (as suggested at the end of my Illustrator thread) something I should consider? Or is Flash a better bet?
    Ques 2
    Does Flash have vector tools that mimic a watercolour paintbrush like in Photoshop? Or is that not possible as a vector, and such effects have to be done outside Flash and then imported as background (or other method)?
    Ques 3
    When a Flash animation is finished, how is it exported, for example, to Premier? Do you export as h.264?
    Ques 4
    It is not clear to Steve and I after viewing three Cintiq videos, how the Cintiq interfaces to Flash. Does the Cintiq know about Flash, and appropriates certain drawing tools automatically? Or do you have to tell Flash (or the Cintiq) that this button on the Cintiq now operates this tool in Flash?
    Ques 5
    Do Flash and Cintiq work well together – and easily?
    Ques 6
    Do I need a monitor to be able to use Flash with the Cintiq? Or would a Mac Mini be a suitable computer – with the Cintiq acting as monitor? Steve won't ever be using this setup as a computer. He'll be treating the Cintiq as a canvas on which to draw and paint.
    Thanks in advance for any replies.

    Hi Guy,
    I thought I was the only one around who was old enough to have worked on wide screen multi-image slide shows!
    Flash may be the right product for you and Steve. I use Flash with an Intuos 4 tablet and it works fine. What you want to do is to search the Flash forums for references to Cintiq. There may be some problems that interfere with your intended use, or it may work exactly as you want. The important element for working with any Wacom product is to be sure that you are using the latest drivers for the Wacom product.
    If you choose to use a mac mini, get a new one, one that can use a lot of memory, you'll need it.
    You can export Flash files to video in most any file type and compression is installed on the computer. So, if you're going to use a Mac, install Quicktime Pro and you should have everything that you need.
    I have never heard of or used Synfig Studio, so I can't comment on that.
    Flash's paint tools are different from Photoshop and more similar to Illustrator's. You will have all of the flexibility of the Cintiq to control painting effects, it will take some practice, but you should be able to get the effect that you're describing.
    Hope this helps with your decision.

  • How to connect a 23" Cinema display and mac mini to an AV Receiver?

    I am trying to get my 23" Cinema display and Mac Mini to a Yamaha RX-2700 AV Receiver. I am on first name terms with the guy in Maplins because I tried to get an Xbox 360 working with this display before and gave up in the end.  The AV receiver has upscaling capability so I thought I'd try again.  I tried connecting a HDMI - DVI adapter to the HDMI Out on the receiver and a HMDI to DVI cable from the Mac Mini to the HDMI in with a optical cable for the sound.  The sound works fine but I get no display - the LED on the monitor flashes three times with a blank screen so it can't read the signal.  Another option suggested was to use a VGA Converter connected to a VGA - HDMI cable but I would like to find out if that would work before going down that route?
    I am looking for some advice about whether this type of configuation is possible with the 23" ACD and if so what do I need to buy to make it work?  I love the quality of my ACD to avoid having to replace it with a TV to get my multi media life in order.
    Many thanks

    The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

  • Im new to the iCloud and Mac in general. After experincing a hard drive crash out of the blue, I lost everything. I want to make sure this doesn't happen again. I show backups for my iPhone and my daughter's iPod but my mac doesn't exist. How do I fix tho

    I'm new to the iCloud and Mac in general. After experiencing a hard drive that went out of the blue, I lost everything. I wanted to use the icloud to back my documents up. I went into the iCloud under settings but it only shows my iPhone and daughter's iPod. How do I get my Mac to back up too? Is there something I need to use to have the documents back up?

    You cannot back up your Mac to iCloud. Even backing the whole thing up to another online service would be dubious because it would take a very long time. You should buy an external hard disk and back up to that - even better, buy two and use one to make a Time Machine backup and the other to clone your Mac from time to time, thus giving you a backup from which you can boot in an emergency.
    If you wanted to back up a suitably sized selection of data to an online service there are a number of third-party methods available, some of which are examined here:
    http://rfwilmut.net/missing3

  • Quicktime encoding using x264 encoder failing in AME 6.0.2.81 and Mac OS 10.8.2

    I'm trying to encode an x264 codec Quicktime using AME 6.0.2.81 and Mac OS 10.8.2. I also tried it with two versions of the x264 encoder which I downloaded from here: http://www.macupdate.com/app/mac/24173/x264encoder
    This encoder works 100% fine and better than the h264 encoder when using Apple Compressor and Apple QT Pro V7. I've been however trying to transition all of my video encodes to AME due to a number of reasons: dynamic link to AE, Premiere and the interface to name a few.
    Everytime I start an encode it gives me an error and I hear that blasted sheep. lol. This is what the log displays, which is frankly probably no help to anyone.
    - Encoding Time: 00:00:00
    01/13/2013 04:48:10 PM : Encoding Failed
    Export Error
    Error compiling movie.
    Unknown error.
    I've also tried to specify the bitrate and have had no luck. Whether I specify the bitrate or not, I still get the error. The source video has been PNG sequences and ProRes movies at 1920x1080, 29.97fps. Both result in the same unknown error.
    Any suggestions? Thanks!

    I know this is pretty old now, but I thought I'd add a reply for those who are having this issue. I just had AME CC 2014 fail on me today, and this is the FIRST thing I've ever tried to render with it. I'm using a TGA sequence and exporting to an X264 codec Quicktime MOV file at 720p. I restarted a few times, repaired permissions etc. and nothing worked except for the following.
    I went to:
    Library/Preferences/Adobe/Adobe Media Encoder/8.0/
    I deleted the entire 8.0 folder (or you could delete whatever version you are having problems with). I then restarted AME and the preferences were recreated and I could successfully use the x264 codec again. Hope this helps someone.

  • Multi coloured spinning cursor and mac air keeps freezing?

    multi coloured spinning cursor and mac air keeps freezing?

    Force Quit .
    Press command + option + esc keys together at the same time for 3 seconds.  Wait.
    When Force Quit window appears, select the application if not already.
    Press Force Quit button at the bottom of the window.       Wait.
    Application will quit.
    http://support.apple.com/kb/HT3411
    Start up in Safe Mode.
    http://support.apple.com/kb/PH11212?viewlocale=en_US

Maybe you are looking for