MX922 hangs, power switch won't turn it off. Can I get it going without just pulling the plug?

The printer seems to do this to me about once a month. If I pull the plug and then reconnect it, that resets everything and gets the printer going again, but I get a nasty error message that I'm not supposed to do that. But what else can I do when absolutely none of the front panel buttons do anything at all? And the printer doesn't respond to any computer commands either.

Hi williamauer,
If it appears that none of the buttons are stuck on the printer and an error message is not displaying and you are unable to turn off the printer normally, the printer may require servicing; please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • I have a Mac pro. A mini disc has got into the disc drive. Eject won't work. How do I get it out without damage to the disc drive?

    I Have a MacBook pro laptop. A mini-disc has got into the disc drive. The eject won't work. How do I get it out without damage to the disc drive?

    Alternatively, you could try some of these suggestions (at your own risk of course):
    https://www.ifixit.com/Discuss/thread/4563

  • My iphone4s wi fi won't turn on how can I get it to work

    Hey . Mi iPhone4s wi fi  won't turn on . I would like some assistant in to make it work .

    First thing you should try is pressing on the sleep/wake button to turn the device off. Once pressing on this button slide the button the reads slide to shut off. Restart your device. Check wi/fi. If this does not help go to settings/general/reset/reset network settings. When resetting your network settings you will need to know your wifi/router password. When you know your wifi/router settings you then can reset network settings.
    Once you have reset network settings you will then go back to settings to wifi and then attempts to rejoin wifi with your wifi name and password. If this does not resolve the issue go to the same area in settings to join wifi and click on other to forget wifi address and click on forget. Once you've click on forget go back to wifi area and type in the name of your wifi and password. If this not sucessful go to your wifi router appliance and unplug the device leaving it off for not less than 5 minutes and then plug back in to reset your wifi router.
    Good luck .

  • I shut off my ipad, and now I have had a black screen with the "busy wheel" spinning for 3hours. Can't turn it off, can't get it to turn on! Is there a reset button somewhere?

    I shut of my Ipad and now i have a black screen with the "busy wheel" spinning on a black screen for 4 hours! Can't shut it off, can't turn it on!!! Is there a reset button somewhere?

    HI,
    Reset iPad.
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appear
    See Here:
    If iPad won't turn on, or the display stops responding
    From Here:
    http://www.apple.com/support/ipad/basics/

  • I have an old ipod that i have not used in a very long time, ive had it on a charger now for over an hour and i still cnnot get my ipod to turn on, how can i fix my problem, i just downloaded the new version of itunes aswell, so i know its not my itunes.

    i have an old ipod touch that i have not used in a very long time, and im having trouble gettign it to turn on. ive had it on a charger for over an hour now and still nothing hs changed. i just updated my itunes to the current version they haev so i know its not an itunes problem its rather a problem with the old ipod touch itself. im leaving for deployment soon and im trying to get this fixed without having to send it in. If anyone has any ideas on how to get this thing turned on it would be greatly appreciated.

    Well, two thoughts.
    The battery has completely discharged and will take overnight to recharge, so don't expect much in an hour.
    The battery has deep discharged and is now dead. It will never recharge and should be replaced.
    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task. Start with Google to search for these.
    The flat fee for a battery exchange is, I believe, $99.00 USD.

  • My 2nd generation ipod touch has a damaged dock connector and won't turn on. Can I get it replaced at the apple store?

    my friend gave it to me so i don't have warranty.

    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price              
    A third-party place like the following isless. Google for more.
    Simple and Affordable iPod Repair Services and parts from iResQt
    However, I consider it is not worth the cost for the old 2G iPod

  • ITunes Match used all my data after I turned it off; can I get a refund?

    Here's the sequence:
    This morning, I had used 700 MB of my 2GB data plan.  I was at home, on wifi, and decided to try turning on iTunes Match on my iPhone 4S.  Again.  Even though the service has seriously made me angry in the week since I got it.
    I decided maybe it would work better if I erased all the music on my phone, first, then downloaded everything I wanted to listen to via Match.  So I had it start downloading some songs (again, on wifi) and I turned OFF "use cellphone data" to make sure it wouldn't download stuff over 3G (oh, sorry, 4G).  Then I went out and started listening to it in the car.  I noticed my smart playlists were completely broken (showed the wrong songs, they were braindead smart lists), got irritated again, and turned off iTunes Match.  Then deleted the music (I was still out) and just listened to a podcast.  Again, "Use cell data" was turned off AND SO WAS ITUNES MATCH.
    Well, I noticed the data spinner was spinning the entire time I was listening to the podcast, but nothing was being downloaded as far as I could tell, my music database was completely empty, and stayed that way.  Then I checked the iPhone's built in data usage and noticed it had gone UP by 600MB in about a half hour (!!!) and the phone was getting very warm.  So I turned off the phone's "use cell data" completely because I knew something was broken.
    Too late.  A little while later (after I got home and was back on wifi) I got a "You've used 65% of your data!" text from AT&T.  Then not 5 minutes later I got a "you have gone over  your 2GB limit" text.  This is not AT&T's fault, so I can't see how I can ask them for the $10 back.  I place this squarely on Apple and their incredibly broken, buggy implementation of iTunes Match.
    So, my question: has anyone successfully gotten a refund for iTunes Match?  It is SO broken, it is useless on my phone (yay, 256K for songs I could have converted to 256K myself since I don't actually pirate my music).  The whole reason I got it was so I could get my whole library anywhere.
    Bah.

    Michael Allbritton wrote:
    Yes, folks have gotten refunds even though the TOS says all sales are final. You'll need to contact iTunes Store support and politely make your case that you're just not satisfied with the service.
    I've got kind of a radical suggestion, if you want to try it. In cases like you describe a full OS restore, then setting the iPhone up as a new device can fix all these little glitches. It is a lot of trouble, I know, but if you do want to use the service this is one method that should clear it all up for you.
    Thank you, it's good to know that Apple does offer refunds.  I want it to work, if it does what I would like the $25 would be more than worth it.
    I thought clearing my music and starting up iTunes Match with an empty music library might do the equivalent of a full reset... I can't say I really feel like doing that, and I'm skeptical it would clear up all of the issues I've had (play counts, play lists, album art, data usage when I told it to bloody well not use the data).
    Thanks for the input!

  • HT1386 My Iphone 5 suddenly won't sync with Itunes, can anyone help me? I just downloaded the new Itunes, and now it won't recognize my phone

    It said that I had an update, so I updated  it and now my Iphone won't connect to Itunes. Please help!

    It has been shown there are problems with the latest update of iTunes and Windows computers. What you need to do is remove and reinstall iTunes, and make sure that you follow the steps in this support document exactly. http://support.apple.com/kb/ht1923. If you do not follow them exactly, you will just compound your problems. Once you do this, you should have no trouble having the phone recognized in iTunes.

  • HPE-400Z start switch won't turn on

    The power switch will not turn the PC on. 
    The power supply and motherboard lights are on, but not the power switch light. 
    I have no clue as to what the problem is, or what to look for.  Has anybody had this problem, and found a fix for it?  Is there anything that can be ruled out, or is there anything that has likely caused this symptom?
    This question was solved.
    View Solution.

    Even though the light on the power supply unit is on, I still suspect that it may have failed.  Here is a guide to help you troubleshoot it:
    http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bph06788
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    See this article:
    http://support.apple.com/kb/ht3964
    Find the section that applies to your computer, and follow the instructions.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • Tried to open my old MacBook.  Couldn't remember password.  Followed suggestion to reinstall hardware.  Now startup disk is stuck in computer and it won't turn on.  I keep getting a message saying I need to restart the computer.  Any ideas?

    Tried to open my old MacBook.  Couldn't remember password.  Followed suggestion to reinstall hardware.  Now startup disk is stuck in computer and it won't turn on.  I keep getting a message saying I need to restart the computer.  When I hold down power button, I get the same message over and over.  Any ideas?

    Hello m.goo, and a warm welcome to the forums!
    To eject the Disc, hold the Mouse button down, (or what passes for it on a Laptop), while powering up, if you also hold the Option key down at the same time it should eject & give you a chance to insert your install disc & wait for it to shw as a Boot option.
    "Try Disk Utility
    1. Insert the Tiger Mac OS X Install disc , then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, *you must select your language first.)*
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
    If it appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, APPs, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120
    Be sure to use Preserve Users & Settings.
    To check if AppleCare applies, AppleCare Products Overview...
    http://www.apple.com/support/applecare/overview/

  • Ipad won't turn on itunes can't connect error OxE800024

    ipad won't turn on itunes can't connect error OxE8000024

    This Apple doc has some tips that can help you fix that problem -> iOS: Unknown error containing '0xE' when connecting to a Windows PC
    If it won't turn on, you could try connecting it to another power outlet or computer.

  • My Mac book pro won't turn on at all and when i put it to charge the light blinks, what should I do?

    My Mac book pro won't turn on at all and when i put it to charge the light blinks, what should I do?

    Yes if your model MBP has a removable battery.  If it does not: 
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    http://support.apple.com/kb/HT3964

  • My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens

    My iPhone4 won't turn on even after being charged for 1 hour and when I plug it into my computer nothing happens. PLEASE HELP

    I have a similar (if not the exact same) problem! Here are some more details if they are helpful.
    My iPhone 4 died earlier today and will not turn back on. It seemed that the battery died while it was not in use. I attempted to charge it on one charging cord in multiple wall outlets and none worked. Assuming it was a malfunction in the cord, I took my phone home to try charging it there.
    Again, I attempted charging it in multiple outlets with a different cord than previously used. None of these seemed to work, though they would flash the Connect to Power screen for a brief moment before returning to a black screen. I assumed that my phone was simply so depleted of battery that it needed a long charge.
    I charged it for 30+ minutes without any success, then attempted to charge it through my MacBook instead of through a wall outlet. iTunes did not even recognize that my phone plugged in (and still hasn't). I've attempted charging it for an extended period of time (1+ hour) with no luck. Sometimes when I press the Power button it will flash the Connect to Power screen once more before returning to black.
    The Apple logo never appears, nor does any apparent progress on charging. I have attempted holding down the Power and Home buttons simultaneously for 10 - 30 second increments. Still no luck. There is no reason anything should be happening with this phone that I can identify.
    I have no warranty and just recently replaced my previous phone which had had similar problems before completely crashing. This is a phone new to me that was previously used but in almost new conditions and factory reset by Apple prior to my purchase.
    Does this mean that my phone battery is dead?
    Is there anything else I can do??

  • I have a new ipad.  I can't get support without my serial number.  Ipad won't turn on.  I ordered it from Target so I have no receipt.  I can't get telephone help without serial number.  What to do?

    I have a new ipad.  I can't get telephone support without my serial number.  The ipad won't turn on.  I order it from Target and there is no serial number on the invoice.  How can I get telephone help without serial number?  Please help!

    The Serial Number is on the back of your iPad.

Maybe you are looking for

  • Is there a maximum number of e-mail addresses in a group?

    imac G5 1.8   Mac OS X (10.4.3)   I have a group of 50 addresses in a group but I am having difficulty in sending a message to them. I get an error message that I can't use the current server and need to chose a new server? Does anybody know what thi

  • Diferent password expiration days for different users in the same system.

    Hi sdn gurus, We need to configure different password expiration days for different groups of users in the same system. We know how to configure the system to define a password expiration time for the complete system (parameter login/password_expirat

  • Listening to Events from inside loaded swf

    In Flash Builder 4 I have a swfLoader with which I load swf files. The swf files that get loaded get created in Flash Pro, and I would like to be able to listen for events from the level that they get loaded from. What would I have to specify in the

  • What is the Application Server with less errors in the installation phase?

    Hi all! According to your experience, what is the trial version that has less problems to install? Is it for Windows or Linux? thanks!

  • ADF, toplink and 2 database users

    Hello, I'm pretty new in creating web based applications. So I did some tutorials about using ADF and Toplink. These tutorials are really helpful, but all examples I found use only one database user. I wonder if there is a way to handle 2 or more dat