MX922 scanner problem message: set the pc to start scanning

I am trying to scan using my MX922 printer. I am getting a message: "set the pc to start scanning." Can't find what this means.

I ran into this... Suddenly the scan function from the Canon didn't work, I just got "Set the pc to start scanning." WT??? Why work all this time and suddenly not? Under scan>save/forward>select pc, only "local (usb)" appeared. No pc. Yet the wireless connectivity was there (I checked, under WLAN set up). Plus, I could print wirelessly, and could scan wirelessly if I initiated the scan from the computer via Canon utilities. So it suddenly no longer could find the pc to scan from the unit, even though clearly the wireless connection was there. Turned it on and off several times as suggested by another post. Finally I went to Canon Utilities,> IJ Network Scanner Selector EX > Scan from Operation Panel Settings (button was already selected) > MX920 series already had box checked, so just said ok. i.e. I didn't change a thing, but somehow that got it to work again, and I can now go back to scanning via the unit itself, specifically Scan button > Start on the MX922, instead of having to initiate the scan from the computer. Hope this makes sense!

Similar Messages

MG6320 Scanner Stopped Working - "Set the PC to start scanning" WINDOWS 8.1

I had this issue when I was on Windows 7, and resolved it by doing what Ramona suggested:
"The Canon IJ Network Scanner Selector EX will need to be running on your computer to scan using the operation panel of the printer. To launch the program, from the Start Menu on your computer, select All Programs, then Canon Utilities, then IJ Network Scanner Selector EX (folder), then IJ Network Scanner Selector EX (program). Once launched, the program will be displayed in the notification area of the taskbar. "
Now I have a new computer with Windows 8.1, and can't find "All Programs, then Canon Utilities, etc."
Can someone please help? I asked this question at the end of my other post, and it's had 39 views, but no responses.
Thanks to anyone who can help.
Solved!
Go to Solution.

Hi GlassHalfFull,
To launch the IJ Network Scanner Selector EX from Windows 8.1, from the Windows Start screen you can just start typing "IJ" to bring up the Search window, then in the drop-down section above the text field, select "Everywhere" and continue typing "Network Scanner Selector EX" until you see the program show up as an option to click on. Once you click on "IJ Network Scanner Selector EX", it should launch the program.
Another method you could use would be to go to the Windows Start screen, then near the bottom of the window below the tiles you should see a down arrow in a circle. Please click on the arrow, then scroll over and look for the Canon Utilities section and click on the icon for the IJ Network Scanner Selector EX.
Hope this helps!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Set the Printer to start Scanning

I get a message "Set the PC to start scanning". How do I do that? I have an ASUS laptop with Windows 10 and I have reloaded the printers driver...still not scanning.Mike

Hi rcmike63! Welcome to the Canon Community and thank you for your post!
So that the Community can help you better, we will need to know exactly what Canon equipment you're using, as well as the way you connect to your device (USB or networked via WiFi or Ethernet).
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.
Thanks and have a great day!

Problem in setting the smtp in a apple mail account.

Can anyone help me resolve a problem in setting the mail preferrences? I have multiple email accounts and the smtp address is being deleted to a none smtp in an account then when I fix the problem in one account it deletes an smtp address in another email account. When I fix that account it deletd another smtp address and so on an so forth. Is this a virus or is there a fix for this problem?

Mail in IOS iPhone or OS X?
Anyway You select each account and assign or create new smtp.

My scanner is stopping in the middle of a scan. it then gives me an error message

my scanner is stopping in the middle of a scan. it then gives me an error message that communication cannot be established and to restart my printer. restarting printer/scanner did not gelp

What printer?
Can you make a copy from the front panel of the printer?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

¿How do I set the calendar to start week on Monday and not Sunday in my iphone?

¿How do I set the calendar to start week on Monday and not Sunday in my iphone?

The jewish calendar does not have names for the days of the week. The week ends with the holy Sabbath (Saturday) and therefore the Sunday is the first days after Sabbath (Yom Rishon), the Monday the second day after Sabbath (Yom Sheini), etc.
The Christians believe that Christ was raised on the first days of the week (Mathew 28:1, et al) AFTER the Sabbath was over. So their holy day is the Sunday and the working week starts on a Monday.
The business days in the western world are numbered starting with the Monday as day number 1 (Timetables of Airlines, Calendars, even Microsoft Windows...).
Unfortunately in the United States religious freedom extends to a level which is not understood easily by the rest of the world. Since the MAC OS X allows to change the first day from a Sunday to a Monday, one might wonder why Apple decided to give the iPhone a jewish touch.
It could be supposed that this is the way of the least resistance. Only few complain about this issue, but if it were the other way around a lot of people would complain...
PS: I agree with the others here: It is very, very annoying and more than once I entered an appointment into the wrong day...;-)

After publishing an adobe captivate 8 file that has a video I got this message when the video slide starts, I'd appreciate if you have any useful suggestions. Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=

After publishing an adobe captivate 8 file that has a video I got this message when the video slide starts. I'm using Adobe media encoder and it outputs the file as f4v formate and when inserted into the adobe captivate 8 project, I found that I'm still getting the same error message after publishing the project. I'd appreciate if you have any useful suggestions.
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2036: Load Never Completed. URL: file://C:\Users\User\AppData\Local\Temp\Rar$DIa0.291\haloSkin1_as3_progressive.swf"]
Thanks in advance
Warm Reagrds

After publishing an adobe captivate 8 file that has a video I got this message when the video slide starts. I'm using Adobe media encoder and it outputs the file as f4v formate and when inserted into the adobe captivate 8 project, I found that I'm still getting the same error message after publishing the project. I'd appreciate if you have any useful suggestions.
Error #2044: Unhandled skinError:. text=[IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2036: Load Never Completed. URL: file://C:\Users\User\AppData\Local\Temp\Rar$DIa0.291\haloSkin1_as3_progressive.swf"]
Thanks in advance
Warm Reagrds

Problem while setting the selected value of h:selectOneMenu to bean

Hi all,
I am new to JSF. I am working on application where i have combo boxe on the page. I am setting some values to the combobox from database using <f:selectItems> tag and one value using <f:selectItem> tag. The value combobox value selected by user is set to the bean property which is String. I am able to display all the values in the combobox but when clicked on button (present at the end of form) i am getting following error-
ERROR HtmlRendererUtils:354 - Error finding Converter for
component with id interviewStageOneForm:acceptanceChannelList
I am setting the combobox selected value to the to the bean property which is String and the value selected in also String. Then which converter it is asking for. I am not able to find out what is the problem.
Your suggestions will be really appreciated.
Here is my code snippet:-
JSF:-
<h:selectOneMenu id="acceptanceChannelList"
     value="#{interviewStageOneBean.index}">
     <f:selectItem itemValue="Select" itemLabel="#{Message.combo_select}" />
     <f:selectItems value="#{MasterDataBean.acceptanceChannelList}" /> 
</h:selectOneMenu>Bean:-
public class InterviewStageOneBean {
     private String index;
     public String getIndex() {
          return index;
     public void setIndex(String index) {
          this.index = index;
}

Hi!
First I would try next:
Try to leave out
<f:selectItem itemValue="Select" itemLabel="#{Message.combo_select}" />
line. And check if it works after that. If it didn't repeat step but you leave in message selectItem and dump out database selectItem line.
Second:
I would check acceptanceChannelList creation and what type of objects you put while doing setValue and setLabel on UISelectItem
Probably selectItem value has been assigned an object of type the engine doesn't know how to convert from String to it.

Problem in setting the parameters for an OASingleSelectionBean

Hi,
I have created an advanced table, for which I have to allow single selection or mutliple selection according to my requirements ie dynamically. So, for single selection, I have created a OASingleSelectionBean dynamically and add this to my advanced table bean.
I also want to set Action for the single selection option. I have set the action using
setPrimaryClientAction() which takes an argument of oracle.cabo.ui.action.FirePartialAction class. Now I also want to pass certain parameters when the single selection event happens.
For that, I have taken an object of FirePartialAction class and but using the FirePartialAction class .setParameters(oracle.cabo.ui.collection.Parameter[]) function. I am setting the parameters using
Parameter class object.setKey
Parameter class object.setValue
But my problem is that I want the value for the parameters at runtime, for which I intend to use SPEL. But I am not able to use SPEL using the setValue method.
So it goes like this in short:
OAAdvancedTableBean.setTableSelection(OASingleSelectionBean)
OASingleSelectionBean.setPrimaryClientAction(FirePartialAction)
FirePartialAction.setParameters(Parameter[])
Parameters.setKey(String)
Parameters.setValue(String) --- In case of value I want to give SPEL as an argument as I get the value at rutime
Is that any other way in which I can set the value for the parameters using SPEL?

Hi,
I got ur point.
Although i have never tried.........Can you try using method
Parameters.setValueBinding(new OADataBoundValueViewObject(<single selectionbean>,<vo attr>))
In this way without the use of SPEL, you will be able to achieve the functionality!
Try this and get back to me!
--Mukul
Message was edited by:
Mukul Gupta

Problem in setting the resultset recordset

hi all,
i am trying to do paging in my website .. i want to set the records fetched from the resultset...i am using the "rs.setFetchSize(3)"
i want to show only 3 records per page...
code is shown below.. problem is it is showing
"java.sql.SQLException: Invalid Fetch Size"
exception.... please help me out...
package demo;
import java.sql.*;
public class fetchrecord {
     public static void main(String[] args) {
          Connection con =null;
          try
          Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
          con=DriverManager.getConnection("jdbc:odbc:chandan");
          Statement st=con.createStatement();
          String q1="Select * from Table1";
          ResultSet rs=null;
          rs=st.executeQuery(q1);
          rs.setFetchSize(3);
          System.out.println("Details are as follows");
     System.out.println("\n");
          while(rs.next())
          String Name = rs.getString(1);
          String School = rs.getString(2);
          System.out.print(Name+" ");
          System.out.print(School);
          System.out.println("\n");
          }catch(Exception e)
          System.out.println(e);
          try {
          con.close();
          catch (SQLException e)
          e.printStackTrace();
thanks
chandan sharma

as per the api documentation, an exception occurs when the condition 0 <= rows <= Statement.getMaxRows() is not satisfied

Problem in setting the target property to _SELF of LinkToURL UI Element

Hi,
I have a LinkToURL UI Element in my web page which has to open up another page in the same window.
I tried setting the target property to _SELF, but it's not working.Instead the page is opened in a new child window.
Please tell me whether to set any other property to get that.
Thanks and Regards,
Padma Usha.

Hi,
Please give the target value in lowercase "_self".
Regards, Anilkumar

Problem in setting the background color of jtable with Nimbus

Hi
I have created a java swing application. In which I am using JTable.
When creating a simple JTable and displaying with Nimbus, the row background color alternates between white and a light blue-grey.
I want the table with single colour. Only the first column should be grey colour and other should be white.
I used this code to set the background and foreground colour.
public Component prepareRenderer
    (TableCellRenderer renderer, int index_row, int index_col){
            Component objComponent = super.prepareRenderer(renderer, index_row, index_col);
            Color objGreyColour = new Color(240,240,240);
            Color objWhiteColour = new Color(255,255,255);
            if(index_col == 0){
                objComponent.setBackground(objGreyColour);
                objComponent.setFont(new java.awt.Font(CommonClass.getFontName(),java.awt.Font.BOLD, CommonClass.getFontSize()));
                objComponent.setForeground(Color.BLACK);
            }else{
                setSelectionBackground(Color.BLUE);
                objComponent.setBackground(objWhiteColour);
                objComponent.setForeground(Color.BLACK);
            return objComponent;
        } Look wise it is fine but when i try to select the cell it is not highlighting the cell and also i m not able to select multiple cell with ctrl key.
Any help would be appreciated
Thanks
Sonal

Hello,
1) if you want better help soone,r please post an SSCCE (http://sscce.org) instead of a code extract.
2) selection highlighting is lost because your code... doesn't handle selection. To take selection into account, you can use <tt>if (super.isRowselected(index_row)) {...}</TT>.
Regards,
J.

Problem while setting the property of column in ALV

Hi ,
I have created a alv dynamically and setting the properties of the column like column header text but its not getting updated .
see the below code for ref.
lr_column_settings ?= lr_config_table.
data:
    lt_columns type salv_wd_t_column_ref.
lt_columns = lr_column_settings->get_columns( ).
data: lr_column      type ref to cl_salv_wd_column,
    lr_header      type ref to cl_salv_wd_column_header,
    ls_column type salv_wd_s_column_ref.
loop at lt_columns into ls_column.
    case ls_column-id.
      when 'MOIST'.
        lr_column = ls_column-r_column.
    lr_header = lr_column->get_header( ).
    lr_header->set_text( 'Moisture %' ).
I am able to set the alv properties like visible row count etc ..
can anybody help out in this issue
Regards
Yash

I was just able to change my headers with the following:
data:
    lt_columns     type salv_wd_t_column_ref,
    ls_column      type salv_wd_s_column_ref,
    lr_header      type ref to cl_salv_wd_column_header.
lt_columns = lo_value->if_salv_wd_column_settings~get_columns( ).
loop at lt_columns into ls_column.
    lr_column = ls_column-r_column.
    lr_header = lr_column->get_header( ).
    lr_header->set_ddic_binding_field( if_salv_wd_c_column_settings=>ddic_bind_title ).
    lr_header = lr_column->create_header( ).
    case ls_column-id.
      when 'CNT_LINEITEMS'.
        lr_column->r_header->set_text( 'Line Items' ).
      when 'VAL_OPEN'.
        lr_column->r_header->set_text( 'Open Amount' ).
      when others.
    endcase.
endloop

Problem in setting the task outcome programmatically

Hi,
I am trying to set the outcome of a human task programatically using the BPM API.I am using the following piece of code to achieve this:-
taskService = wfServiceClient.getTaskService();
task=taskService.updateTaskOutcome(wfContext, task.getSystemAttributes().getTaskId(), "SUBMIT");
But what is happening is although the task form is being submitted and I can only see it in the completed list of tasks in the BPM workspace, the process flow is getting stuck at the human task node.Do I have to call anyother method in order to move the process flow to the next activity? I tried with :-
taskService.submitInfoForTask(wfContext, task);
But I am getting an exception.Any help is highly appreciated.
Thanks
Edited by: user11930797 on Nov 17, 2011 3:48 AM

If the Human Task shows status complete, then it's possible that there was an error in the output data association in the process. In EM do you see a fault on the output for the Human Task activity, or if PS4FP the process will go to suspended state if the data association fails.

Problems in setting the Secondary y-axis caliberation

Hi,
I have a Business Graphics (Time-Scatter Graph) Application having 2 y-axis representing the sales volume. I have set the minimum value of the primary y-axis to 0 using the <b>default series</b>, but am unable to set the minimum value of the secondary y-axis value to 25. please help me in doing the same.
Thanks

Hi,
have you set the minimum values using the chart designer? Just click on the second value axis node and set the minimum value to 25 (don't forget to set minimum calculation to user defined).
Regards, Kai

MX922 scanner problem message: set the pc to start scanning

Similar Messages

Maybe you are looking for