MX922 scanner works when installed but is not seen after re-start.

Windows 7 64bit fully patched...
This unit works fine on windows 8.1.
I tried the driver that came with the printer as well as the two found online....
mast-win-mx920-1_0-ucd   and
mp68-win-mx920-1_00-ea32_2
Same malfunction with both drivers.
Anybody else seen this?
Thanks
Don

Hi donnyg,
The Windows Firewall may be blocking the scanner from operating wirelessly.  Let's try temporarily turning off the FIrewall:
 1.  Open Windows Firewall by clicking the Start button, clicking Control Panel, clicking Security, and then clicking Windows Firewall.
 2.  Click Turn Windows Firewall on or off.  If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
 3.  Click Off (not recommended), and then click OK.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

  • I downloaded fire fox and installed but its not opening after installation

    I downloaded fire fox and installed but its not opening after installation. So what should i do?

    Hi, tiger's iphone.  
    Thank you for visiting Apple Support Communities.
    Here are the best troubleshooting resources to go through when experiencing issues updating your iOS device over-the-air.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Resolve issues with an over-the-air iOS update
    http://support.apple.com/kb/TS4431
    You can also update this iPad via iTunes on a computer as an alternative.
    Update your device using iTunes
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update.
    Click Download and Update.
    If you see an error message while updating your device, you can learn how to resolve iOS update errors in iTunes.
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    Cheers,
    Jason H.

  • FF works on startup but will not open after closing until I reboot.

    Until today everything okay. This evening tried to re-open Firefox and it would not. Rebooted computer & Firefox opened OK but after I closed it an tried to reopen, it would not start. Now it appears that Firefox will only open on a fresh restart of my computer. Running W-7 64 bit.

    Some added toolbar and anti-virus add-ons are known to cause
    Firefox issues. '''Disable All of them.'''
    Start '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in Safe Mode]''' {web Link} by holding down the '''<Shift ''(Mac Options)'' >''' key, and then starting Firefox. Is the problem still there?

  • Not able to install onedrive for business, keeps telling its already installed but its not (W7)

    not able to install onedrive for business,  keeps telling its already installed but its not  (W7)
    after a change of the 365 office version OneDrive for business it is not possible to reinstall the software
    it keeps telling me it is already installed.
    I think some settings are still there from the old install.
    how can I remove them or force the reinstall

    yeah finally
    Problem solved! , my tube is back to normal ( to rock )
    all i did is , removed the sys,private,system,resources,data folders from the memory card , switched off my phone , removed the memory card , did a soft reset (*#7370#) and tried to install an application from downloads , i was able to install in the phone memory as memmory card was not inserted then switched off the phone , inserted the memory card and tried to install an application from the downloads, finally i was asked where to install the app. and gave memory card , viola application installed sucessfully
    Regards,
    evil_night13

  • It's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

    it's been a while that Im unable to copy music from itunes to my iphone. I updated my device to the latest version of IOS 5.1.1 and made sure no jailbreak is installed but still not working. please assist.

    Assuming you are not manually managing your music, verify the following:
    You are using the latest version of iTunes
    On the summary tab of your iTunes sync settings you have checked "Sync only checked songs and videos"
    In your music library you have checked all the songs you want to sync to your phone
    There are no exclamation points next to any of the songs you want to sync to your phone
    You have authorized your computer for all Apple IDs for purchased music you want to sync to your phone (in Store>Authorize this computer)
    You have checked "Sync Music" on the Music tab of your iTunes sync settings
    When everything looks correct, sync your phone.

  • I've installed Mavericks on my Mac Pro. It works well, generally, but will not stay sleeping! Pressing the power button twice sometimes extends the sleep mode but even that seldom results in a full overnight sleep.  File sharing off. What else can help?

    I've installed Mavericks on my Mac Pro. It works well, generally, but will not stay asleep! Pressing the power button twice sometimes extends the sleep mode but even that seldom results in a full overnight sleep.  File sharing off. What else can help?

    Hi fremley,
    Thanks for visiting Apple Support Communities.
    This article may be helpful with determining why your Mac Pro doesn't stay in sleep mode:
    Mac OS X: Why your Mac might not sleep or stay in sleep mode
    http://support.apple.com/kb/HT1776
    Some things reset the sleep timers, preventing the computer from sleeping:
    Hard drive access (even if you're not using the computer, a running application might be accessing your drive, such as when downloading a large file or listening to music in iTunes)
    Moving the mouse or using a portable Mac's trackpad, pressing a mouse button, or pressing a key on the keyboard
    Some System Preferences settings (see below)
    Open applications (see below)
    Input devices (see below)
    Expansion cards (see below)
    Additional drives, such as USB, FireWire, DVD, or CD drives (see below)
    Best Regards,
    Jeremy

  • I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawa

    I have just recently installed ios6 to my iPad 3 an iPhone 4 my iPhone works fine but my iPad is not working at all I can not get a response from it, it seemed to download an then install but did not reset and turn on and will not turn on HELP!! Withdrawal or what!! Lol

    Hi there,
    Firstly, try a hard reset. Hold the sleep/wake and home buttons together until the Apple logo appears.
    If this doesn't work, try restoring your device. Put it in recovery mode if iTunes doesn't recognise it, and restore it from there. I have linked to instructions below.
    Recovery Mode and Restore - Apple
    Let me know if this helps,
    Nathan

  • I have the Native AMP stack installed but apache not working

    i have the Native AMP stack installed but apache not working is there a way to reset apache manafaacture settings

    The following line tells me that this is not a template file, but a document created from a template called index.dwt
    <html xmlns="http://www.w3.org/1999/xhtml"><!-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
    This means that you saved a child document as a template file at some stage.
    If you go to Modify->Templates->Detach from Template, you can remove the template structure from your document. All you then need to do is to re-save the document as a template.

  • When trying to install Adobe Standard XI, it says, "Setup has detected that you already have a more functional product installed. Steup will now terminate."  I have a Pro trial installed but did not seed so much functionality so I purchased standard.

    When trying to install Adobe Standard XI, it says, "Setup has detected that you already have a more functional product installed. Steup will now terminate."  I have a Pro trial installed but did not seed so much functionality so I purchased standard.

    uninstall any acrobat and reader versions, if you have win os clean (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then install acrobat std.

  • My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?

    My Yahoo mail account has suddenly stopped working. Have deleted and re installed but still not working. Recently updated iOS could this be related?

    Try resetting the Yahoo password. Yahoo not infrequently has problems.

  • I have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution

    Hi guillermospain,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    OS X: Connecting a Wi-Fi printer to your Wi-Fi network
    http://support.apple.com/kb/ht3500
    OS X Mountain Lion: Set up a printer
    http://support.apple.com/kb/PH11145
    OS X Mountain Lion: Reset the printing system
    http://support.apple.com/kb/PH11143
    Cheers,
    - Judy

  • I have mac 10.6.8 and safari 5.1.10. on checking help website i am told latest flash player 16.0.0.305 is already installed BUT is not listed in my applications and unable to access sites requiring flash player. can anyone help?

    i have mac 10.6.8 and safari 5.1.10. on checking help website i am told latest flash player 16.0.0.305 is already installed BUT does not appear on my list of applications and am unable to access websites requiring it. have also downloaded flash player installer app but unable to download the flash player itself. can anyone help? thank you!

    Hi Anne,
    Your version of Safari is still supported.  Please see Adobe Flash Player | Tech specs for supported OS and browsers.
    If the Flash Player plugin is in the Plug-ins (disabled) folder it's because it's an older version that Apple has disabled in Safari.  This has nothing to do with whether or not Flash Player supports the browser.
    I'm not sure what you mean by "when i click on flash player itself i am told there is no application to open it."  Flash Player.plugin only works in the browser to view Flash content in the browser.  The plugin does not open files outside of the browser.  If you have SWF files you'd like to view outside of the browser, then you'll need the Flash Player projector. However, based on your previous comments this doesn't appear to be what you are trying to do.
    Google Chrome does embed Flash Player in it, while Firefox does not.   Mozilla has also recently started blocking older versions of Flash Player in Firefox similar to what Apple is doing in Safari.
    Following the 'clean install' instructions should result in you having the latest version of Flash Player installed that will not be blocked by the browser.
    Maria

  • How can I reinstall deleted free Apps which now show as installed but are not actually there?

    How can I reinstall free Apps that I have deleted (because ALL stopped working) which now show as installed but are not actually there?
    I loaded a bunch of free Apps (maybe too many?) right after I got my 4s yesterday, and at some point I noticed that none of the downloaded Apps would work. The screen would blink when I tapped the icons, but the Apps stopped opening. Resetting the phone didn't help, so I decided to delete all the Apps I had downloaded and start over.
    I can get the "Purchased" list to show up by pressing Updates button (is there another way?) but the show as "installed" in greyed-out letter, so I can't figure out how to get them back.

    Your iPad screens aren't completely filled up are they? If they are, you will only be able to find them using the search feature on the iPad.

  • My ipod works in itunes but does not appear in "my computer" after I changed the properties

    My ipod works in itunes but does not appear in "my computer" after I changed the properties.
    First off, I'm using Windows XP (and Mac SnowLeopard) Here's how it started. For some reason my ipod started showing up as a camera when I plugged it in. It works fine in itunes, though. But when I tried to access it from "my computer" it only
    showed me the one and only picture I had on my ipod. I deleted that picture hoping it would no longer show up as a camera. When it still did I right-clicked on it in "my computer" and selected "properties". Under "autoplay" I
    chose for it to 'not show up' or 'take no action' or some such deal when I plugged it in. I thought that would stop it from popping up the window that asks whether i want to 'open camera wizard' or 'open camera scanning' or 'open folder to view files' or 'take
    no action' , etc. But now it won't show up in "my computer" at all. I also have a Mac with SnowLeopard. When I plugged my ipod into it my ipod doesn't show up in "finder" either! So basically my problem is not a mechanical one with hardware
    or software; yht ipod still works fine in itunes. I just need to undo the change I made. I've searched all around my preferences, utilities, options, etc. It shows up on my "Device Manager" but not on "Disk Management".
    Any help would be very much appreciated. Thanks.

    Hi,
    To show up in Windows Explorer, you can try placing the iPod into
    disk mode.
    Moreover, i recommend you to
    restore ipod to factory settings.
    If this issue still persists, locate to device manager, uninstall and reinstall USB Mass Storage Device driver.
    Here is an article you can refer to below:
    http://support.apple.com/kb/TS1369
    To get more help, you can also redirect to apple support forum:
    http://www.apple.com/support/ipod/
    Thanks!
    Andy Altmann
    TechNet Community Support

  • Links work in iweb, but do not publish

    NOW the "post new topic" shows! Links made in iweb to external webpages work in iweb, but do not work when I publish to my folder or upload them to my server for my website. The links to other pages within iweb & the email links work in my folder & uploaded. I have redone my page & all links several times & it always works in iweb, but then don't work in the folder when I publish or upload. Even links that start with http:// don't work & my setting are correct for it to recognize them. Thanks so much for any help.

    I don't understand. When I made the page the first time, I put the pics on it (page is 1270 pixels wide & fits on my 17" monitor & displays fine in iweb & when I go to the website). & then made the text boxes & sized them to fit around the pics & typed the text in. I tried doing the "wrap" in inspector, but the type just went over the pics & didn't wrap around it. I put the links for the ffrco, nuvet, email & menu in separate "insert link" boxes. The other links were from a copy & paste from the Nuvet website. All links worked perfect while in iweb. but only the email & menu links worked when I published to the folder & uploaded them. iweb is way different to use than Pagemill3, which is what I created my original website on 6 1/2 years ago. But my first computer melted down inside & I don't have the program that created it & the new computer won't take the software that worked on OS 8.6, so have to do the whole website now from scratch & having a terrible time. There are other issues, but the links thing is the most frustrating.
    When I redid the page again, I copied & pasted the whole page onto a new page that I had sized & added the background to. The links all worked in iweb & when they didn't work when published to the folder or uploaded, I rechecked the web addresses for all the links & even reentered them, though they were the correct links already in there.
    When I made my homepage, I made it to fit a 15" monitor, so anybody could see my website without scrolling. A good friend told me I had the last 15" monitor still in use & to make it fit my 17", so I did.
    Thanks so much for looking at it. I really appreciate all your help. I have printed the manuel & been reading that & going to the Help section & I just can't figure it out.

Maybe you are looking for