MX922 wireless LAN setup problems with iMac

I am trying to setup my new MX922 printer with a new imac. During the original setup phase, I got a message instructing me to press the "WPS" button on the "access point" for 3 seconds. Before I could figure out what the heck either a WPS button or an access point is, the setup screen on the printer disappeared. Now I will have to go back through the setup process again, but the instructions to do so include using the dosc. My imac does not have a disc drive. I know that the files can be downloaded on the canon website, however there are several drivers or software programs for the MX922 that can be downloaded, and it is not at all clear which I would need.

Hi Toeknail,
To install the printer wirelessly, please click on the link below to go to the Drivers and Software page for the PIXMA MX922:
PIXMA MX922 Drivers and Software page
Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "RECOMMENDED FOR YOU" section and click on the CUPS driver file. When you do, another page will appear giving details of the file you are about to download will appear.
3. Please scroll down on the Details page and agree to the terms of the disclaimer message to continue with the download process by clicking on the "I AGREE - BEGIN DOWNLOAD" button. After clicking the "I AGREE - BEGIN DOWNLOAD" button, follow the instructions to download and install the driver. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Once you have downloaded and installed the CUPS driver file from the website, please also install all other items from the Recommended for You section of the website. Please also download and install the ICA drivers from the "DRIVERS" section, and all of the software from the SOFTWARE section of the page.
Since you plan on using the printer wirelessly, please be sure to install the Canon IJ Network Tool (found in the Recommended for You section) last after all other software has been installed.
Once all items have been downloaded, please double-click on each of the items on your Mac to install them. Once all items have been installed, please restart your Mac and attempt to print.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
After five days of testing in the service they can not found fault and it was decided to change the graphics card.
New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

You could look at the System Profile for the info it presents for the card. But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
What program are you trying to run? Is there anything in the system log?
I think it's the program that's having the problem and not anything with your video software.

Problems with iMac retina 5K (artifacts, glitches and etc.)

Hello dear Apple.
I have bought new iMac with retina 5K display and I have found lot of problem with it. It was December 2014 when I got my first iMac. And after then I have found few real problems with it.
The first problem is I can't open high resolution image with standard Preview.app. I mean 'high resolution' - more then 30-40 megapixels. When I open them, I can see image, but only 2-3 seconds, and after that I see horizontal artifacts only. I can't open images, like this Rembrandt.jpg; Carpaccio.jpg; Holbein.jpg
The second problem, when I change resolution in to scaled mode (System Preferences/Display) for increase image on display. I found when select some area on background of desktop it has left some lines after itself. It is particularly unpleasant if you have plain colour desktop background. You can view, how does it look here.
The next problem with animation in different parts of interface, e.g. sometimes when I open Time Machine some parts of windows are freezing or appear some artifacts or glitches near borders of window. And I have the same situation, when I open Mission Control, or any Adobe app or other, or simply rename a files. I have found few discussions with problems like mine, but in the separate places
5K iMac - bad GPUs?
Graphic Problems with Retina iMac
iMac 5K and indesign glitch
And after that I want to tell you that I have this problems on four (4) iMacs. It was really difficult to arrange four replace. I have lost a lot of time an spent a lot of nerves for discuss and resolve my problems with Apple support. Finally, they told me that they do not know about problems with iMacs, and they could offer give my money back. I glad to get my funds, but now in my country price for iMacs has doubled. And if they refund my money, I can buy half new iMac only.
I am sorry for my language and style, but I do not know what I should doing with that. And should I hope, that my problem resolve with OS X updates? Or it is hardware problem of the whole iMacs 5K...

Yes Ralph, absolutely correct, 4 times. Do you have the graphic card the same as me, or m290? Could I ask you check your iMac for few things, please?
For the first, can you enlarge scale in System preference/Display and install plain dark color desktop background. Are there any footprints after rectangular selection like in my video https://youtu.be/dBglFvjJx1Q?
And for the second, could you download this image https://upload.wikimedia.org/wikipedia/commons/0/07/Rembrandt_Harmensz._van_Rijn _-_Nachtwacht_-_Google_Art_Project.jpg and open in plain Preview.app, and zoom it? Are there any glitches?
Thank forward.

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

I had a problem with imac screen going black. apple store diagnosed prob with video card which they replaced. Brought it home, turned it on (have done this 4 times) it starts up, wheel turns, there is a long bar at bottom which fills up, then it turns off

Apple guarantees their work, take it back.

Broadcom Wireless Card Setup Problems

Hello there, I'm very new to Archlinux and to linux overall. Since I'm done with my classes for the summer, I had the crazy idea to setup a home web server with my old machine and at the same time use the wireless card as an acess point for my laptop. The problem is that I followed all the steps in the Archlinux wiki about the wireless setups for the B43 driver several times. However, my system seams to ignore all my efforts and keeps making fun of me. According to what I understood, it's not setting up the network interface. (Which is suposed to be done automaticly I think) So here's a bunch of troubleshooting commands results.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
lspci | grep -e Network
01:06.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
lshw -C network
*-network
description: Network controller
product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 6
bus info: pci@0000:01:06.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=b43-pci-bridge latency=32
resources: irq:16 memory:40000000-40001fff
lsmod| grep -e b43 -e bcm43xx -e ssb -e ndiswrapper
b43 172775 0
ssb 44979 1 b43
mmc_core 52043 2 b43,ssb
pcmcia 29658 2 b43,ssb
mac80211 171331 1 b43
cfg80211 126817 2 b43,mac80211
led_class 2609 1 b43
Here are the links I followed to try to setup and try to troubleshoot my things
For b43 driver:
http://wiki.archlinux.org/index.php/Wireless_Setup
http://ubuntuforums.org/showthread.php?t=780692
http://linuxwireless.org/en/users/Drivers/b43
For ndiswrapper driver
http://ubuntuforums.org/showthread.php?t=780590
(There was an other one that told how to set it up but i can't find it)

Ok, I"ve done it and I got a few errors.
b43-pci-bridge 0000:01:06.0: PCI INT A disabled
cfg80211: Calling CRDA to update world regulatory domain
b43-pci-bridge 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
ssb: PCI-ID not in fallback list
ssb: CHIPID not in nrcores fallback list
ssb: Core 0 found: UNKNOWN (cc 0x8FF, rev 0x7F, vendor 0xFFFF)
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
ssb: Unsupported SPROM revision 255 detected. Will extract v1
ssb: Sonics Silicon Backplane found on PCI device 0000:01:06.0
Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
So, does that mean that I don't use the proper firmware?

MacBook Pro 15" Late 2011 Problems with iMac 27" Late 2009 TDM

Hi,
I just got problems with my iMac 27" Late 2009 (Mini-DisplayPort) and my MacBook Pro 15" Late 2011 (Thunderbolt).
When I try to use my iMac as external monitor for my MacBook, there are massive glitches and graphical bugs on my second screen.
I bought a MDP-to-MDP wire from Belkin which works perfect on other computers.
I tried these things:
- Disconnected MagSafe from MacBook + unplugged all USB devices + switched graphics to discrete.
- Shut down all computers ... then booted MBP, iMac and triggered CMD+F2
- SMC, PRAM reset on both devices
The cable works, because:
17" MacBook Pro Late 2011 works perfectly on my iMac screen with my Belkin wire!
I connected my MacBook Pro 15" to a 27" Cinema Display and it works flawless.
After that I plugged it out and tested it again with my iMac screen -> suddenly it works.
Retriggering CMD+F2 or replugging breaks it again with massive bugs.
The MacBook Pro 17" is on 10.7.2, 15" is on 10.7.3, but I also tried to trigger dual screen in 10.7.0 setup with the same issue.
Maybe its a problem with the internal 6750M of my MacBook Pro 15"?
The 6770M of the 17" is working well.
Sample Video:
http://www.youtube.com/watch?v=W_pgc52syes
All updates/firmware updates of iMac and MacBook Pro are installed.
Any solutions?
Greets,
Kai

Since this is a user to user forum with no employees participation, your plea is a good a screaming into the wilderness. I suggest that you post your thoughts here:
https://www.apple.com/feedback/

Airport problem with iMAC 27" and serious service support for indonesia

Hi all,
i can't seem to get any help from anywhere else. so i try to post it here.
i tried to call the apple store (indonesia) which i bought this imac 27" from. got transfered 4 times and i had to explain it to them all over. in the end i got to speak to the technician and i asked whether i can get a replacement and they don't think it's the correct solution and leave me hanging here.
the apple store is listed as an apple authorized service provider (AASP) or apple authorized distributor (AAD):
iBox by Padang Digital Indonesia - Apple Authorised Service Provider
Puri Imperium Office Plaza, (Belakang Menara Imperium)
Jl. Kuningan Madya Kav. 5-6, Jakarta
12980
Tel: 62 21 8370-iBox (4269); 830 6763
Fax: 62 21 830 6730
Email: [email protected]
Web: http://www.ibox.co.id
i called the apple support on the apple.com (0018 03061 2009 for indonesia) today wednesday 19 may 2010, time 1:12pm indonesia local time (GMT +7) i didn't get the guy's name but i can tell he's Indian from the accent, i told him what the problem is, he told me to wait, i waited for 10 minutes and he hung up on me at 1:24pm. please check on the record, because i was told the whole conversation was recorded.
so, let's go to the problem:
i can't share my internet with airport built-in in my imac 27".
I'm using ZTE usb hsdpa modem connected to the imac. (fyi, my friend is using the same exact modem and internet provider and don't have any problems with internet sharing using his macbook)
i tried to share the internet through the airport express simply with these steps:
1. open the system preferences, internet sharing,
2. connection with "ZTE usb modem", and the box next to "Airport" is ticked
3. turn on the internet sharing
4. press start
5. yes the firewall is off.
and these are what i'm having right now:
1. the airport symbol wont turn into an arrow
2. when i open the network preferences, it says: AirPort is turned on but is not connected to a network. (color is orange not green)
3. i searched the wireless network with my ipod touch and i found nothing
4. if i try to "create a network" here's what it says "There was an error creating your computer-to-computer network."
5. this are the details on the airport card:
Software Versions:
Menu Extra: 6.2 (620.24)
configd plug-in: 6.2 (620.15.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2 (620.24)
AirPort Utility: 5.5.1 (551.19)
IO80211 Family: 3.1 (310.6)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x8F)
Firmware Version: Atheros 9280: 2.1.9.5
Locale: RoW
Country Code:
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Not Associated
and yes, i've updated all the airport software and i stick on the 10.6.2 os.
It seems like people who has this latest imac 27" also having problems with the airport express. and they somehow got a replacement.
http://discussions.apple.com/thread.jspa?threadID=2261196&tstart=0&messageID=109 80828
so, i really really appreciate if i can get help here.
many thanks and best regards,
irene

If you have anything configured in System Preferences/Network/Airport then you have conflicts configured into the network. I suggest that you start from the beginning. Do not assume anything. Do not take any short cuts. Start fresh.
Go to Sys Prefs/Sharing turn off Internet Sharing. Go to Sys Prefs/Network, highlight AirPort and press the - symbol below to remove the AirPort interface. Now press the + symbol and create a new AirPort Interface. In the new AirPort interface do not turn on AirPort. You should only select the box to show AirPort Status in the menu bar. Now press Apply.
Go to Sys Prefs/Sharing and follow the steps 1 through 11 in my first post.
In step 11 Sys Prefs should ask you to turn on AirPort. Turn it on. It should next ask you to start Internet Sharing. Start Internet Sharing.
The AirPort Status in the menu bar should show AirPort is on and have an arrow pointing up. In the AirPort Status dropdown menu it should show AirPort is ON, Internet Sharing is ON and it should show the name of the Internet Sharing network that you created.

PCI Card Slot - Wireless LAN Card Problems - Help!

Help.
I'm having problems getting my board to recognize both:
Linksys WMP11 Wireless LAN card; and
Netgear WG311T Wireless LAN card
(returned the Linksys card, but the Netgear card had the same problem).
Neither card is being picked up by Windows (XP Home), although both the "power" and "link" LED lights up when inserted. I've tried every PCI slot, same issue. Nothing shows up in the device manager, and no new hardware is detected. The Netgear software tells me that the card has not been installed.
Am left thinking I need to RMA the board. Any suggestions woudl be much appreciated.
K8N Neo Platinum
AMD 64 3200+
512mb OCZ 3200EL
Samsung 120mb SATA 7200rpm
Pioneer 108D DVD
Sapphire 9600xt

My roommate has a similar setup as you and I am having the same problem getting a pci wifi card to work in the machine. I have tried both a Linksys WMP54G and a Netgear WG311. Both cards will scan for networks bit will never connect my router (Linksys WRT54G). Just to get them to recognise the network, I have to turn off WEP, and turn on ESSID broadcast. Both of these cards work prefect in other computers. I know it not a signal problem because I can take my laptop and set it in the same location and it gets excellent signal.
I have tried changing slots in the machine, the wifi cards were the only PCI cards in the machine and an GeForce 6800 GT in the AGP slot. I have no idea what the problem could be. But I'm leaning towards the mobo at this point.

Airport Express problem with iMac G5 iSight - help needed!

I bought an Airport Express (AX) last week, upgraded my OS to Leopard and installed Airport Utility fine. I could join my existing wireless network and everything worked fine for streaming itunes through my stereo. But this week Airport Utility has stopped being able to find the AX and I can't work out why - really need some help! Its in the same place as last week, close to the computer, and I tried another location right next to the Imac but didn't work. When I restore factory settings Airport Utility does recognise the device, and allows me to update settings for wirelessly connecting to my existing wireless network, so the light on the AX is solid green. But then AU again says it cannot find any AX wireless device. Can anyone tell me what I'm doing wrong???

Hi I'm still battling with this - have connected the AX to my Imac via ethernet and it shows up fine in Airport Utility. Status light is green and it says its set up to connect to my existing wireless network using wireless connection. Security in Network Preferences is the same for both: WPA2 Personal.
So I don't think there's a problem with the AX, and my current wireless network (BT Home Hub) is working fine.
And when I restore factory settings Airport Utility can see the AX before updating settings so the wireless side of AX must work too.
I'm figuring it must be something about the settings that mean AU can't see it anymore. But I can't work out what, since security is the same.
Any ideas would be great!

Safari load image problem with iMac Intel core

I got my new iMac 20" Intel core and system updated everything. I found that Safari cannot load image in my web photo album ( http://fotop.net/nicknick ), all image became "?".
I can load this page correctly with FireFox and Opera Browser. I also try the iMac 17" PowerPC in my office with the latest version Safari, it also load the album correctly. And I know this web is created and store in a Linux server, the web page coding not written or optimized to IE.
I've try to reinstall the whole OS X, nothing else installed, the same problem occurred.
Is it the problem on Intel core? or any setting I can do to overcome it?
Hope the problem could be solve, I like to use Safari except this problem.
iMac 20" Intel core Mac OS X (10.4.5)

Well... no - except to ask if your intel imac is connected to the internet in exactly the same way as the ppc imac. If it is, then that's puzzling
You're right, I'm puzzled by the imac.
Intel imac is at my home, ppc imac is at my office;
both using same ISP but different service plan,
(home:) PPPoE, ADSL modem -> buffalo MIMO wireless router -> intel imac (both direct wire or wireless connect have same result)
(office:) fixed-ip, ADSL modem -> firewall -> Linksys wireless router -> ppc imac (wireless)
both network setting with manual assigned IP, gateway and same DNS
Same result occurred when (1)open box new machine, (2)after updated system, (3)reinstall whole OS with preserve the old setting, (4)reinstall whole OS with erase the whole harddisk option, (5)updated system after the reinstallation.
I firstly think may be some security setting in imac that blocked the images, but can't found out. I secondly think some html code at this web not work on Safari.
May someone with same machine help to open this web to see if all intel imac get the same result?

Strange Boot problem with iMac OSX 10.7.5 (Boot loop, not working safe boot etc.)

Hey guys,
I've got a strange problem with my iMac Late 2009. This morning it didn't want to boot (grey screen with turning wheel). Yesterday when I shut it down everything was fine. Last backup was finished three minutes before. So I was a bit shirty but noch scared of any data loss.
I tried the following things:
1. boot recovery and check hdd (it's a new one, only second day back from apple store for replacing seagate hdd), everythings fine
2. try to boot in safe mode, did not work!
3. try to boot in verbose mode, did work until it stopped. Screenshot of the last lines of log is within this post
4. I used my TM backup and afterwards I could boot! Strange, because as I sad the backup finished a few minutes beforce I left my mac and shut it down
Now I'm a bit scared of shutting it down again But what would be the next step to find the error? My first thought were some third party kernel extensions, but that would not affect a safe mode boot, am I right? I have a Macbook Air here which is setup nearly identical to my mac and it's working. Could it be a hardware fault? Maybe you've got an idea.
Thanks!
Max

at the moment it seems to be a corrupted time machine backup from my old hard drive (new one has a runtime of 27 hours). So I'll will try a clean install of my system at least, when I got the time. sh%&$ !

P43 Neo - PCI wireless LAN performance problems

Hi,
i recently installed the Neo P43 Board. Everything runs fine so far, except PCI wireless LAN (maybe more, it's the only PCI card I use). I already updated the BIOS to 1.6 but it doesnt fix it.
I tried 2 different WLAN cards (1 Realtek and 1 Ralink). Both of them basicly work, but the transfer rates are painfully slow although the connection quality is reported as good enough.
Anyone else having issues?

How low are the transfer rates?
It varies a bit but most of the time very low (as low as 1kbps or sometimes not working at all)
What are you connected to (Router?, What kind of Router)?
Connected to a router. It's a "Speedport" router, I think they are manufactured by Siemens.
When you talk about the transfer rate, do you mean the transfer rate that you get when you try to copy files to another system in a Wireless network?
I mean downloading files from the Internet over the router, or generally the connection to the router (like status page).
The Ralink card used to work just fine in my older PC with an Athlon XP / Nforce Chipset (and several other PCs), but on the Neo P43 makes problems with both, the Ralink and the Realtek card.
I'm not absolutely sure it is the board that makes these problems, but I can't think of any other source for this problem anymore.

Why Apple isn't acknowledging the wireless drop out problem on iMacs?

Hey everyone
I've been having constant wireless drop out on my iMac while all other computers at home work perfectly.
I've noticed I am not the only one who is having this problem and it seems to be a software/ upgrade problem that Apple needs to get fixed.
Anyone knows any progress on this topic?

Unfortunately you simply can't say that this is a general problem. Or, rather, you can, but you won't be taken seriously. Some of us (me, for example) have several Macs, including several iMacs, and simply do not see your problem with any of them. It may be a problem linked to the specific model. It may be a problem linked to a specific batch. It may be a problem linked to specific 3rd-party software. It may be linked to any of several other mutually incompatible factors. What it definitely is NOT is a general problem.
Those who have it need to provide further data _to Apple_ using the feedback system so that the actual cause of the problem can be identified and a fixe set up.
Insisting that it is a general problem when it quite clearly is not will tend to get you ignored.
Which precise model of iMac are you using? There are several different 24" Intel iMacs; which one is yours? When was it built? Where was it built? (You can tell this by looking at the serial number.) Are you running any 3rd-party haxies? What stuff are you running? Does any of it launch at startup? What make and model wireless router are you connecting to? How are you connecting to it, using 'G' or 'N'? Is your connection encrypted, and if so, using WEP (bad) or WPA (better)? Are you broadcasting SSID? How close are you to the wireless device? Is there something in the way, such as a wall or a floor? What are the walls/floor made of? Are you using other devices which access the same general radio band (you do know that wireless systems are radios, don't you?) such as wireless landline phones, or microwaves, or some cell phones, or baby monitors? Are there other wireless systems in your immediate neighborhood, and what channels are they broadcasting on? What channel is your wireless router broadcasting on?
Are you beginning to see the number of possible reasons for your problem?

Wireless Lan connection issue with Linux clients

Hi
In a large Wireless Lan enviroment for a university, we have 3 WISM moduls attached on a 6k hw - Manged by ACS v6.0.181.0
We recently upgraded the software version of the controllers from 4.x to 7.0.98.0 - the Emergency Image version is 5.2.157.0
Since then, the students with Linux clients have massive connection issue - repeated connection lost in a short time period.
However the students with Windows clients have no problem at all.
The studends report, that their linux clients getting so much of some kind of unnecessary broadcast traffic which can not be handled by the NIC - and the NIC goes down - and this happens all 5-10 minutes.
Affected Linux clients are: Ubuntu v10.10 - also OpenSuse, Fedora and Arch-linx with latest OS version.
Any Idea how I could solve this problem?
Thanks in advance for your help

Hi Nicolas
Thanks for your reply. The broadcast forwarding is disabled on WLC's.
Pls find below the attached picture, which shows the captured broadcast traffic on a linux client (sent by a student to me).
I'm not sure, if its really only the broadcast traffic, which the linux clients can not handle.
From my point of view, it seems also to be that the linux clients are somehow disadvantaged among the other clients like windows or mac, if they all trying to get a wireless connection.
But the fact is only the linux clients are affected - and this happens to the linux clients only in our wireless infrastructure.
Windows or Mac clients have no such problem at all
regards
Enis

Remote Delta link setup problem with Bean / Access Service

Hello,
I am trying to setup Remote Delta Link (RDL) between two portals. (Both portals same version - EP 7.0 EHP1 SP 05 - are in the same domain)
I already have the Remote Role Assignment working without any issues.
The following have been done successfully:
1. Same user repository has been setup for both the portals
2. Setup trust between producer and consumer (SSO working fine)
3. Producer added and registered succesfully on consumer
4. Permissions setup on producer and consumer
4. pcd_service user with required UME actions setup
I am able to see all the remote content in the Consumer portal.
When I try to copy the remote content and paste it as local content, I am getting the following error:
Could not create remote delta link to object 'page id'. Could not connect to the remote portal. The remote portal may be down, there may be a network problem, or your connection settings to the remote portal may be configured incorrectly.
After increasing the log severity, I am able to see the following in Default Trace:
com.sap.portal.fpn.transport.Trying to lookup access service (P4-RMI) for connecting to producer 'ess_int' with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
com.sap.portal.fpn.transport.Unable to lookup access service (P4-RMI) with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
AbstractAdvancedOperation.handleDirOperationException
[EXCEPTION]
com.sap.portal.pcm.admin.exceptions.DirOperationFailedException: Could not retrieve the bean / access service to connect with producer
Could not retrieve the bean / access service to connect with producer
Like you can see above, there is some bean / access service which is not retrieved successfully. I am not sure if this is a permission problem on the consumer.
I have checked that the P4 ports are configured correctly (standard - not changed) and I am able to telnet from producer to consumer (and vice versa) on the P4 port.
I am stuck at this point and am not able to find any information on this.
I would really appreciate if some one can point me in the right direction.
Thank you for reading.
- Raj

Hi Raj,
Please check your config of the P4 port on the producer. Is it really 50004 (check SystemInfo of the producer)?
I do think there's a problem with the P4 communication since RDL requires P4 connection.
Do you have load balanced consumer-producer connection? Please refer to this blog for further details
Little known ways to create a load balanced Consumer Producer connection in a FPN scenario
Regards,
Dao

MX922 wireless LAN setup problems with iMac

Similar Messages

Maybe you are looking for