MXE 3500 Integration with DMS VMware

Can MXE 3500 integrates with Show and Share 5.3.0 Vmware setup?
Is there any chalanges for integration?

Hi Nicolas,
Thanks for the update..
We are trying to integrate TCS and SNS with MXE.
We are refering the below document from SNS with MXE..
http://www.cisco.com/en/US/docs/video/mxe/3500/sw/3_x/3_3/integration/note/integ_mxe33_sns.html
and the below document for TCS with MXE.
http://www.cisco.com/en/US/docs/video/mxe/3500/sw/3_x/3_4/cxs_solution/configuration/guide/cxs_config_guide.html
We have tried to upload one video in SNS and its went to MXE for convertion, MXE has converted this video successfully and sent this video to SNS. This is working without any issues.
But we are trying with TCS, there we are facing one issue.
TCS is recording video and sending it to MXE, we can see this particular video in Job status monitor in MXE but its not converting succesfully, the job status is showing "fail" as a status.
What will be the issue and how we should troubleshoot?
Regards,
Nishant

Similar Messages

  • New to SAP PLM7.0 integration with DMS

    Hi Friends,
    i am new to SAP Solution PLM7.0, and also about the integration with DMS.
    i wish to learn about this, so pls assist me and forward some links and documents.
    that would be helpfull for me.
    thanks,
    udhayasurian

    Ajaykumar,
    You have BI and BO installed and running on good environment,Correct??
    Only you need SAP Integration Kit installed.
    After installing successfully.
    Create master BEx query. Go to Properties -->> Extended tab -- Allow external access to OLAP (Incase of BW3.x)
    Create master BEx query. Go to Properties -->> Advanced tab -- Allow external access OLAP (BI7.0)
    Now go to Universe Designer:
    -->> Name Universe and Click on Connection -- New
    -->> Connection parameter dailog box -- It prompt for many options like:
    Authentication Mode:User/Pass or BO mappings or SSO
    User Name:
    Password:
    Language:EN
    Application Server: <SAP BI system details--IP address>
    System ID:<SAP BI ID>
    System No:<SAP BI NO>
    Logon Group:(greyed out)
    Message Server:(greyed out)
    -- Click on Next
    -- Here, you can see all OLAP cubes ($Infocubes) and Folders for BEx query based/Multiproviders.
    -- Select the required one.
    -- Click Next -- Next -- FINISH
    OK
    Now you can see lict of *Classes and Objects* and not Universe structure as we are on SAP BI system.
    (In Universe Designer window)
    Go to -- File -->> Export -- (Select any folder, where you have access)
    Now, *logon to Infoview*:
    -- Document list
    -- New-->> New Web Intelligence Document
    It will list out all Universe those are exist in repository.
    Choose the exported one.
    Now you are in *Web Intelligence Report panel*.
    -- Drag any objects like Dimension/Detail or Measure to Result Objects pane (to see them in Report)
    or
    Drag them to Query Filters section to restrict the data.
    --Click on Run Query
    -- Now Report you can see.
    If you want to create Report 2:
    Just Right click on Report1 and say Duplicate or New Report.
    Hope I cleared all your doubts.
    Thank You!!

  • IPVC 3500 integration with Polycom Video Conference Solution

    Hi Team,
    Can you please provide necessory details for integrating polycom with IPVC 3500.
    Regards
    Febin.S

    I dont know IPVC details I know the Ip-Address details founding site http://www.ip-details.com/ .All the informations very fast also.

  • DMS integration with PP and PS.

    Hi SAP PLM experts,
    I would like to know how mySAP PLM's DMS module  is integrated with PS and PP module.
    Any small scenario with T codes and configuration help is highly appriciated.
    If you guyz have any documents/materials for this question, please mail the same to sudhu03 at gmail dot com.
    Thanks in advance,
    S.Achar.

    It is only through the object linkwhich you provide.
    In the business perpective, we attach the contract documents, design drawings and other doucuments to the project for ready referance.
    You can create the DIR directly from PS transaction or you can create it in DMS and attach it to the Project.
    We do have the red lining to identify teh changes reqd in the document.

  • Integration of dms with WORKFLOW

    hi, all
    i m DMS consultant,
    one of my client needs, worflow integration for DMS module,
    how i can go for that,
    what is the limitation
    please with EX
    ben
    ponts awiting

    Hi Ben!
    I wondering if you found any std workflow related to DMS or of if you had to build your own?
    A reply would be very appreciated.
    Best Regards,
    Roland

  • SAP -DMS Integration with MS-Outlook

    How it will possible to attach originals in DMS to Ms-Outlook. (Just Click on originals and send it to email directly without checkig out and saving that on local drive).we have SAP ECC- 6.0

    Hi,
    Install EasyDMS software available freely from sap market place. It is  MS explorer integration with sap. After creating document record in it, just select the file which you can send it to MS Outllook as similar as you do to send file from MS explorer to MS outlook.
    Anirudh,

  • MXE 3500 Reporting

    Hi,
    We have an MXE3500 installed. There is a reporting requirement and the focus is on 3 prime areas -
    (1) How much activity is flowing through the service
    -Total number of Jobs per day
    - total processing hours per day
    (ii)    What is the Peak traffic profile
    - Peak volume of jobs at any point during the day
    - Maximum wait time for a job during the day
    (iii)     Service Outages
    -Number of service outages during the day
    -Number of job failures during the day
    I looked the Reporting eature available on the MXE webui (Job Custom Report & Task Custom Report). ITs not giving the desired results(Or maybe I dont understand it correctly). Can anyone suggest a way I can pull a report which will give me the above details? Many thanks
    Zeeshan

    Hi Nicolas,
    Thanks for the update..
    We are trying to integrate TCS and SNS with MXE.
    We are refering the below document from SNS with MXE..
    http://www.cisco.com/en/US/docs/video/mxe/3500/sw/3_x/3_3/integration/note/integ_mxe33_sns.html
    and the below document for TCS with MXE.
    http://www.cisco.com/en/US/docs/video/mxe/3500/sw/3_x/3_4/cxs_solution/configuration/guide/cxs_config_guide.html
    We have tried to upload one video in SNS and its went to MXE for convertion, MXE has converted this video successfully and sent this video to SNS. This is working without any issues.
    But we are trying with TCS, there we are facing one issue.
    TCS is recording video and sending it to MXE, we can see this particular video in Job status monitor in MXE but its not converting succesfully, the job status is showing "fail" as a status.
    What will be the issue and how we should troubleshoot?
    Regards,
    Nishant

  • Ask the Expert: C-Series Integration with Cisco Unified Computing System Manager

    Welcome to the Cisco Support Community Ask the Expert conversation. This conversation is an opportunity to learn and ask questions about Cisco C-Series Integration with Cisco Unified Computing System® Manager (Cisco UCS® Manager) with Cisco experts Vishal Mehta and Manuel Velasco.
    Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (Cisco IMC). When a C-Series rack-mount server is integrated with Cisco UCS Manager, the IMC no longer manages the server. Instead you will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager command-line interface (CLI).
    Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management. The following are the connectivity modes:
    Dual-wire management (shared LAN On Motherboard [LOM]): Shared LOM ports on the rack server are used exclusively for carrying management traffic.A separate cable connected to one of the ports on the Payment Card Industry Express (PCIe) card carries the data traffic.
    SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco UCS Virtual Interface Card 1225 (VIC1225) connects one cable that can carry both data and management traffic.
    Direct Connect Mode: Cisco UCS Manager Version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
    Vishal Mehta is a customer support engineer for Cisco’s Data Center Server Virtualization Technical Assistance Center (TAC) team based in San Jose, California. He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco Nexus® 5000, Cisco UCS, Cisco Nexus 1000V, and virtualization. He presented at Cisco Live in Orlando 2013 and will present at Cisco Live Milan 2014 (BRKCOM-3003, BRKDCT-3444, and LABDCT-2333). He holds a master’s degree from Rutgers University in electrical and computer engineering and has CCIE® certification (number 37139) in routing and switching and service provider.
    Manuel Velasco is a customer support engineer for Cisco’s Data Center Server Virtualization TAC team based in San Jose, California.  He has been working in the TAC for the past 3 years with a primary focus on data center technologies such as Cisco UCS, Cisco Nexus 1000V, and virtualization.  Manuel holds a master’s degree in electrical engineering from California Polytechnic State University (Cal Poly) and CCNA® and VMware VCP certifications. Remember to use the rating system to let Vishal and Manuel know if you have received an adequate response. 
    Because of the volume expected during this event, our experts might not be able to answer every question. Remember that you can continue the conversation in the Data Center, under subcommunity, Unified Computing, shortly after the event. This event lasts through May 23, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

    Hello Sebastian,
    The different modes of connecting C-Series with UCSM come into play depending on the type of infrastructure you already have along with C-Series and NIC model.
    Cisco UCS C-Series Rack-Mount Servers are managed by the built-in standalone software, Cisco Integrated Management Controller (CIMC) .
    Powerful features provided by Cisco UCS Manager can be leveraged to manage C-Series server by integrating  C-Series Rack-Mount Server with UCSM.
    This not only gives you rich-feature set but also one management plane to operate UCS-B Series Chassis and UCS-C Series Rack Server.
    You will manage the server using the Cisco UCS Manager GUI or Cisco UCS Manager CLI.
    Cisco UCS Manager 2.2 provides three connectivity modes for Cisco UCS C-Series Rack-Mount Server management.
    The following are the connectivity modes:
    •  Dual-wire Management (Shared LOM):
    Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0100.html
    This mode is recommended when you have C-Server which does not  have or cannot support VIC 1225 card (such C-200 server)
    •  SingleConnect (Sideband):
    Using Network Controller Sideband Interface (NC-SI), Cisco UCS VIC1225 Virtual Interface Card (VIC) connects one cable that can carry both data traffic and management traffic.
    This feature is referred to as SingleConnect.
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_011.html
    This most recommended Integration model when using FEX and VIC 1225 card
    •  Direct Connect Mode:
    Cisco UCS Manager release version 2.2 introduces an additional rack server management mode using direct connection to the Fabric Interconnect.
    This mode will eliminate the need for FEX module as Servers are directly plugged into the base ports of Fabric Interconnect
    http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm2-2/b_C-Series-Integration_UCSM2-2/b_C-Series-Integration_UCSM2-2_chapter_0110.html
    Please let us know if you need more information. Thank you!
    Thanks,
    Vishal

  • ISE integration with Mobile Device Management ( MDM ) help required

    Dear Techies,
         Am here bring to your notice an different issue and no much resources to support even in PEC or Cisco Document.
         We are conduction a Proof Of Concept (PoC) on  Secure Bring Your Own Device ( BYOD ) using Cisco ISE and gonna test all the scenarios like Wired, Wireless and VPN user access.
    Setup Brief :
    =========
          Our Setup has  ISE VM acting as Admin, Monitor and Profiling Device, we have NAC 3315 physical Appliance as Inline posture Device, Wireless LAN controller, Access point and the Identity source as Microsof Active Directory
         Having Plans to Integrate Mobile Device Management ( MDM ) and Citrix VDI setup also.
    Activity Brief:
    =========
         As of now we have tested the Wired Scenario Authentication and authorization for guest users and gonna carry out the profiling and posture.
    Clarifications Required
    ================
    Wired Scenario - Require some configuration / steps on how to carryout posture for the guest wired users i.e. LAPTOP.
    Wireless Scenario
    MDM can be integrated to ISE ? 
    How the MDM can be integrated to Cisco ISE configuration or Guide to show the same?
    What is the demarcation between MDM and ISE ( i.e. What is the role of ISE and MDM on Mobile Devices ) ?
    If MDM is available so then when the control of ISE ends, does MDM do management or ISE will do management of the devices ?
    Is MDM will do client provisioning or ISE should do ?
    Is MDM send or update patches of Mobile Devices ?
    As of now these are the scenarios, kindly revert if any good documents to show this or share your expertise on the Integration Part.
    Thanks for Reading...
    Arun

    I would like to avail your valuable inputs to understand on the  Client provisioning part for the Mobile Devices/ Laptop. I understand  from your reply that MDM integration is not available in the current  release ISE 1.1 - That is correct.
    Kindly let me know your views or any documents on the following scenarios with the current release in mind
    1. User  with Mobile devices connecting to Wireless  ( both Employee  and Guest ) , How the Flow differs for the Employee and Guest.  How the  client provisioning is done ( i.e. Like Posturing  or Compliance Check  ).
    The posturing and compliance check is done based on the user authentication information (i.e. AD memberOf vs Guest user) combined with the users endpoint (windows, mac osx, or a mobile device), ISE then has a few decisions to make based on the authorization policies. For example, if a Domain User coming from a Windows 7 machine joins the network, then can either use the nac agent, or the web agent. Then you can scan for registry settings, file settings, program requirements, hotfix compliance...and the list goes on. If the user fails a check then you can either assign an acl for the user so they only have guest access, or you can place them into a remediation vlan the options are entirely up to the requirements and however the solution is implemented.
    2. User  with Laptop  connecting to Wireless  ( both Employee  and Guest ). How the client provisioning is done ( i.e. Like Posturing   or Compliance Check ).
    Guests are usually redirected to the guest portal which they authenticate and their user group falls within the Guest container that is on the ISE internal database, that is usually coupled with an authorization profile that grants them internet access. For the client provisioning, that is usually done based on the operating system, via profiling (dhcp, and user agent string., netmap...etc) and can be fine tuned for all laptops or to a specific set of users based on their group membership.
    3. What are advantages of having ISE also in  place for Mobile devices, since most of the Mobile related tasks ( like  Authentication, Authorization, Profiling and  Posture ) are carried out  by MDM. I am checking for the significant advantage of having ISE for  Client network having only Mobile devices. Kindly clarify.
    Currently the advantage of Cisco ISE is that it supports profiling within wireless and really fits well within a network that has mostly Cisco products since they are all part of of the Borderless security initiative being driven on the backend. The product teams for wireless, wired, security (vpn..etc) and ISE are pretty close in building their solutions so that you can get connected with any device any where (sorry for the sales pitch). The latests wireless code is improving and is going to have support similar to the ios sensor for wired devices where dhcp, cdp, and other attributes can be sent in the radius packet for better profiling decisions. With integration for an MDM platform coming soon, and also support for TACACS rumored (have to verify with your account rep) you have options that really stand out from a unit that only supports MDM. Cisco ISE also comes with a wireless product ID so that makes the budget work when it comes to deploying ISE if you arent looking for enforcement on your wired devices.
    4. Do you recommend 802.1X Authentication to use for the Employee and Contractor? The Guest user  authentication as Open ?
    For internal users and vendors the best option by far is dot1x, almost all operating systems are capable of performing dot1x and the 1.1.1 MR has a piece now that can provision the supplicant for the users, by using scep to enroll certificates or configure peap settings.
    There is a feature within the guest portal that allows you to statically assign guests into endpoint group, that feature is called device registration web authentication. It seems like an open network but uses mac filtering to assign these devices to an endpoint without requiring users to enter any credentials. They are presented with an AUP page, once they accept their mac address is mapped to the endpoint group
    5. How can we ensure the Encryption of traffic from the Guest user to the NAD ( Network Access devices ) ?
    This may be a wireless question but I am sure the encryption is done using AES and using dot1x as the key management here is a brief background for this - http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00807f42e9.shtml#L2
    You can also use the anyconnect client which can provide macsec which is layer 2 encryption for wired - http://www.cisco.com/en/US/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html
    6. We are also looking for VDI  ( Citrix, VMware ) solution for the  client  ( both Employee and Guest ) , how ISE can play a role in  securing the VDI environment.
    For most thin clients you can perform dot1x authentication on the device itself, however that is something the manufacturer will have to support. This is a little gray for me.
    7. Is that any integration required  with Citrix or VMware. How the  VDI can be offered based on the User  role ( i.e. Employee, Contractor or Guest ), since Guest database is  available only with ISE, how the checks are made from the VDI  environment.
    IN ISE there is an identity sequence which can authenticate users in AD first, if the user is not found then it can look in the internal database.
    Our solution demands  MDM in the integrated  solution, As on today ISE cant be integrated with MDM. so what kind of  solution we can propose to have MDM and Cisco ISE .Do the clients now  enter the network should have already installed the MDM agent (or) any  other way of pushing the same to the Client.
    Today there is no integration between the devices, the last release time I heard was December for this feature. However it would be best to confirm with your Cisco Account rep on this issue.
    Thanks,
    Tarik Admani
    *Please rate helpful posts*

  • Not able to start presentation services during EBS integration with OBI

    Hi All,
    I ran through an issue while trying to integrate OBIEE 11.1.1.5 with EBS R12. I followed the steps mentioned in the below link
    http://docs.oracle.com/cd/E14571_01/bi.1111/e16364/ebs_actions.htm
    I restarted all the services but i was routed to OBIEE login screen through EBS. Later on i made some changes in connection pool of the repository and started the services but now presentation services are not coming up. i tried restarting all the services from EM and opmnctl but to no avail. i went through sawlog5 and console~coreapplication_obips1~1.log file but not able to find any specific error. Below is the error description from both the files
    sawlog5.log : [2012-06-29T07:24:45.000+02:00] [OBIPS] [ERROR:16] [] [saw.dms.conext.unwrap] [ecid: 000001U8AG25Ahd5pf_AiY01402c000001,0:29] [tid: 4884] Failed to restore ctx from reference[[
    File:executioncontext.cpp
    Line:286
    Location:
    saw.dms.conext.unwrap
    saw.threadpool
    saw.threads
    ecid: 000001U8AG25Ahd5pf_AiY01402c000001,0:29
    ThreadID: 4884
    console~coreapplication_obips1~1.log : 12/06/29 08:08:29 Start process
    12/06/29 08:08:51 Start process
    12/06/29 08:19:41 Start process
    12/06/29 08:20:00 Start process
    12/06/29 09:09:53 Start process
    12/06/29 09:10:15 Start process
    i am relatively new to OBIEE 11g platform. Please let me know if i need to look in some other log files.
    Regards,
    Sandeep

    Hi,
    i did make changes to connection pool but those changes are inevitable. I pointed those connection pools to the new EBS database.
    @DPKA : i did make changes to instanceconfig. As a part of OBIEE integration with EBS, i changed instanceconfig.xml and started the services. I didn't bring down the services while making the changes. Did that have any impact on services.
    Regards,
    Sandeep

  • MXE 3500 v3.3 admin user role

    Hi,
    I am currently work with a MXE 3500 v.3.3. When I loged into the system using GUI, I don't get the Administration role in toolbox. My user is admin. So please help me, how can I give admin user the admin role permission.
    Please see the attached file for details.

    You were probably trying to define multiple domain indexes on the same column using identical indextypes. How many indexes you have on table_colum?

  • Can MXE 3500 stream MPEG2 directly to DMP4310?

    I have a TCS intergrated with MXE 3500. I'm trying to use the IPstream Distribution profile to stream MPEG2 to DMP4310.
    I utilize the following encoder in MXE 3500 ( H.264 and MPEG), use the following Distribution - IPStream (multicast IP address) and Output (MPG). Out Distriburion is working well, except the IPStream Distribution to DMP4310 is not working. I tested the multicast with my existing AS8100 to make sure it not the multicast setup.
    Anybody has the same set up in your enviroment?
    Many thanks.                    

    This thread is Answered.
    Create a job profile and use H264 Encoder -IP_Streaming, create a distribution profile under IP_Stream (multicast IP and port)
    Test IP capture by installing VLC in MXE3500.MXE3500 cannot capture multicast TS streaming,so I decided to run a TCS Unicast Streaming.
    Lastly, create a live event.
    Run VLC, open network stream, enter udp://@MulticastIPAddress:port
    There you go.....

  • MXE 3500 v3.3 Host ID changed

    Hi,
    I am working with MXE 3500 v3.3. Earlier I have installed the server and after that I have received the license file base on the "HOST ID" from cisco. But I have to install the server again and now I have noticed that the "HOST ID" has been changed. So the earlier license file shows invalid for the same server. I can not request for the license file to cisco again as it has the same PAK. So please help me, if there is any work around to install the license on the same server.

    I had the same issue after upgrading from 10.7.2 to 10.7.3 and changing my main SSL cert.
    The solution was to make sure the correct cert was listed in:
    /etc/openldap/slapd.conf
    as well as:
    /etc/openldap/slapd.d/cn=config.ldif
    It looks as though the slapd.conf file gets updated properly when you select an SSL cert in the Server Admin app, but the cn=config.ldif does not. That is the one that was hanging my server up.
    Hope this helps!

  • OIM 9.1.0 Integration with Active Directory 2008 R2

    Hi,
    My customer is running Root/Child AD structure based on windows 2003 w/SP2, OIM 9.1.0 deployed under one of the child domains, and integrated with child domains controllers which runs windows server 2003 as well.
    My customer has decided to upgrade his AD to Windows Server 2008 R2 domain controllers across the entire AD Forest and still wants to integrate the current OIM v9.1.0 with AD for all of his Users provisioning and password synchronizations.
    Am not sure if current OIM version of OIM 9.1.0 is compatible and supported by OIM v9.1.0 under active directory version 2008 / R2, and not sure if it can be integrated with such AD version.
    Any guidance is really appreciated.
    Also I was thinking of such scenario but also not sure of its support ability and if OIM will keep working on such scenario, the scenario is to upgrade only the AD root domain to Windows 2008 R2 while keeping the child domain holding the OIM 9.1.0 at Windows 2003 version.
    Is this a working and supported scenario by OIM v9.1.0 ?

    I believe you question should be if the connector supports this architecture. Check out the versions supported for the connector you are using and you should be good.
    -Bikash

  • Service desk integration with 3rd party tool

    Hi all,
    I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
    So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
    The webservice then will be called by the 3rd party tool with corresponding data.
    However, according to spro I need to define a value mapping for incoming/outgoing calls.
    I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
    SAPCategory
    SAPComponent
    SAPDatabase
    SAPFrontend
    SAPIncidentID
    SAPIncidentStatus
    SAPInstNo
    SAPOperatingSystem
    SAPSoftwareComponent
    SAPSoftwareComponentPatch
    SAPSoftwareComponentRelease
    SAPSubject
    SAPSystemClient
    SAPSystemID
    SAPSystemType
    SAPUserStatus
    What about attachments, priority etc.?
    Will the interface parameters mapped to these ones?
    For what purpose do I need to maintain the value mapping?
    Can you give me a hint?
    Regards, Richard Pietsch

    can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

Maybe you are looking for