MXF decode error

When I tried to render my sequence I got an error message. In Premiere I saw "MXF decode error".
It only happens on the spots where I used opacity and transitions.
Deleted cache and all the usual things I could do, but nothing helps.
Cheers

Try to convert your MXF files into other format like MPEG. Or just find go for another edit software like FCP X, the 10.1.4 can support MXF files natively and as well as 4K . But if you just get used to this Adobe premiere , here are some free converters for you : Handbrake, ffMPEG(_this one I am not very recommended, it will mess all your original video and database), MPEG Stream clip, any video converter. I used now is this MXF Converter from pav, and the quality is good.

Similar Messages

Red frames and MXF decode error

Hi there,
I have Premiere Pro CC and running Mac OSX 10.9.5. I have one long 32 minute long C300 MXF clip in my timeline which seems to be fine until around the 26 minute mark, where the entire frame goes red. The audio still works, but I can't see anything. I have tried to convert the clip to ProRes in Media Encoder also, but the same issue happens.
In the report log from Media Encoder I get the following message repeated many times:
MXF decode error in "[FOOTAGE LOCATION]/Card 1/CONTENTS/CLIPS001/E51151/E5115107.MXF" at frame 47650. Frame 47618 was substituted.
And then occasionally it says:
MXF read error in "[FOOTAGE LOCATION]/Card 1/CONTENTS/CLIPS001/E51151/E5115107.MXF" at frame 239.
Any advice about this??
Thanks,
Simon

Hi there,
I have Premiere Pro CC and running Mac OSX 10.9.5. I have one long 32 minute long C300 MXF clip in my timeline which seems to be fine until around the 26 minute mark, where the entire frame goes red. The audio still works, but I can't see anything. I have tried to convert the clip to ProRes in Media Encoder also, but the same issue happens.
In the report log from Media Encoder I get the following message repeated many times:
MXF decode error in "[FOOTAGE LOCATION]/Card 1/CONTENTS/CLIPS001/E51151/E5115107.MXF" at frame 47650. Frame 47618 was substituted.
And then occasionally it says:
MXF read error in "[FOOTAGE LOCATION]/Card 1/CONTENTS/CLIPS001/E51151/E5115107.MXF" at frame 239.
Any advice about this??
Thanks,
Simon

MXF decode errors and red frames in exports

Ever since upgrading to Premiere Pro release 2014.2 (8.2.0 (65) Build) we've been having problems with random red frames appearing in our exports. These errors are always associated with our Sony PMW-200 media files (.mxf files.) Red frames during editing happen very rarely, but are usually present in our exports. For short form work re-exporting the sequence will work sometimes, but may cause red frames to appear elsewhere... For long form work we've adopted a very lengthy work-around to fix the errors after exporting.
Phone support recommended deleting the media cache files, but we've tried that and the problem still exists. This problem is happening with new media that has been imported since the upgrade as well as old media that we imported before the upgrade. We're editing with many mixed media files all in their native codec and the only media files that get flagged with decode errors are the .mxf files.
We edit a large volume of work daily and this problem is a huge setback in our confidence with our exports as well as Adobe products.
For the record were editing with Mac Pros that are about a 3-5 years old with OS X 10.8.5 and an Xsan shared storage system. We have a Cloud for Teams subscription and all our software is updated frequently.
Any thoughts would be helpful. Personally I would love to escalate this problem to a higher level support team.
Regards,
Eric

I have the same problem running Adobe CC on high-end PCs. - My business is smalish, but this leads to having a rather big impact on my confidence.
MXF-files from Canon C300 and Sony FS7 platforms.
- With FS7 footage I've had the frames appear throughout a clip with perfect distance (16 frames apart) - when applying Denoiser 2 from Red Giant. - The plugin simply stopped the frames from appearing on a random basis.
- I've also experienced that when the error was present, dissolves became cuts.
- I've tried to isolate software/hardware rendering, but it does not seem to change anything to select one over the other.
I try work around it by rendering uncompressed sections of the timeline and replace it where it works, and then try again and again. - Very time-consuming and cumbersome.
Best
Torsten
Denmark

MXF read errors in CC 2014.1

Has anyone else noticed a sudden onset of MXF read errors after updating to the latest version of Premiere? I'm getting the dreaded "Red Frames" on footage that works fine in the previous version (2014.0). The problem doesn't occur on import, meaning the errors will show up while I'm working (indicated by the red X in the lower right corner of the screen). The only errors I receive during import are related to unsupported file types (I'm dragging in the entire captured card, and it doesn't like the XML files). I have maintained the same workflow successfully since Premiere Pro 5.5 with this footage, only now am I beginning to see issues that are exclusive to this version.
The issue occurs on both converted and new projects, and I'm starting to lose my sanity - the solution I've found is simple: re-import the footage after moving it to a different location on your system, and re-link the files. This clears up the error, telling me that it has nothing to do with the files and everything to do with how they're being read. The files work fine in VLC, along with previous versions of Premiere that are installed on our other work machines.
The problem with this solution is that it totally Adobe's me: that is, it wastes my time on a bug that didn't appear before a recent upgrade while working to a deadline.
The MXF files are coming from a Canon XF300. http://www.canon.ca/inetCA/en/products/method/gp/pid/4484#_030
MPEG2, 35Mbps (VBR) 4:2:0, 1920x1080 (30p)
If you're noticing this issue as well, please let me know. Perhaps there's a codec issue on my system, or perhaps this latest update should have just been avoided... Is there any way to roll back to CC 2014.0 ?
Operating environment:
Windows 7 x64, SP1
Core i7-3930k, 32gb RAM
Nvidia Quadro 4000
Media access:
The files are stored locally on a mechanical drive, the Premiere is running off of an SSD.
Workflow:
Copy the entire card to the computer, and then dragging the folder that it was copied to into Premiere. Wait for Premiere to conform and import.
Where the issue is noticed:
The problem typically occurs when footage has been nested with effects applied to it (at the root, not on the parent sequence). The error doesn't appear on import, but rather during the scrubbing/playback.

Hi Atkinsgj,
Atkinsgj wrote:
These forums are listed as an official support channel, but they're staffed primarily by volunteers...
Yes, that's the reality. I do try and get as many employees as possible to participate, though.
Atkinsgj wrote:
Can I request better support on the feature request forum?
The feature request forum? Do you mean the Premiere Pro forum? Feel free: http://adobe.ly/feature_request
Atkinsgj wrote:
As my inbox continues to receive notices of other people having issues with this ancient file-format, my concern grows because this kind of issue isn't a new trend.
Your In box grows from other people's issues? Sorry, I'm not understanding. Are you in support or education as well?
"This kind of issue…" refers to what? File based camera formats like AVCHD, etc.? As Neil says, there are lots of things that can go wrong with these kinds of formats. Chief among them is not ingesting them correctly, via the Media Browser not File > Import.
Atkinsgj wrote:
...but that's really disappointing to hear. Adobe is a 32 billion dollar company - who made over 3 billion in gross profit last year, more than the GDP of many small nations...and there is limited support for one of your flagship products...a product that was recently used to make a blockbuster hit (Gone Girl).
I don't believe I know of any one company creating complex software that doesn't need a larger support staff. We do the best we can with what we are given. Of course, I have no control over how many support agents we have on the phones or on chat. I'm lucky now that I have a couple of agents dedicated to the forums, so you should see this situation improving.
Atkinsgj wrote:
If there's a better way to seek a resolution please let us know, we don't want to stretch thin valuable resources or waste time.
Try this: Contact Customer Care
Thanks,
Kevin

Decode error when outputting to file to later burn to DVD

I have an MPG file created in Ulead Media Studio Pro (which I can no longer run as it does not run on Windows 7 which my new PC uses). I created a new project in PE9, added the mpg file, dragged it to the timeline and told Premiere to change the project settings to match. It is now PAL DVD Upper field first. There is no red line on the timeline above the clip. When I try to output it to a file for later burning to DVD I get a decode error around a particular frame. When I go near that frame in the monitor window and step forward one frame at a time it moves smoothly until it gets to the frame in question when there is a noticeable delay from pressing the arrow button and the time counter updating to the next frame number. The MPG plays fine in Windows Media Player and VLC player - it shows a cross fade transition at the spot that fails in PE9. Is there anything I can do to fix this? I don't have independent DVD authoring software as otherwise that would be an option.

Depending on the source footage, I have found that some other programs do a better job of handling them. For that reason, I have CyberLink PowerDirector, and Magix MovieEdit Pro on my computer. Actually, since I use PrPro for most of my work, that is also why I bought and installed PrE - it handles footage well, that PrPro chokes on.
Personally, I am less comfortable actually editing in PowerDirector, or MovieEdit Pro (older versions of both), but PrE is closer to PrPro, so I rely on it as my "first step," and the other two NLE's more as just converters.
Still, if another tool in your video-editing toolbox, works better, there is zero shame in using it. Sometimes an adjustable spanner is all a mechanic needs, but when they require a universal socket with a "wobbly" extension on their Snap-On rachet, then the adjustable spanner goes back into the toolbox.
Most of all, I am glad that you are able to produce the desired results. That is what it's all about.
Thanks for reporting your workflow and your success. Good luck.
Hunt

Decode Error in Cisco VCS for a call from Jabber to telyHD

Hi,
We have the following setup:
Cisco Jabber <---> Cisco VCS <---> telyHD (Our Video Product)
Now, the call works well when the call is intiated from telyHD to Cisco Jabber.
But, the call fails when the Cisco Jabber initiates the call towards telyHD.
The packet capture on VCS shows that there is a syslog message from VCS to Jabber indicating the following when 180 Ringing is received from telyHD:
Message [truncated]: tvcs: Event="Decode Error" Service="SIP" Src-ip="10.1.1.19" Src-port="5060" Dst-ip="10.1.11.11" Dst-port="25331" Detail="(User-Agent) Single header User-Agent appeared twice in message" Protocol="TCP" Level="1" UTCTime
Can you please help in troubleshooting this issue. I don't see multiple "User-Agent" headers in the 180 Ringing sent by telyHD.
I have attached the packet capture on VCS.

I am also having the same issue. Can someone please respond? Thanks.

How can I eliminate (watch) in videos that read "ERROR: DECODE ERROR"?

Usually when in a web site (like Fox News) & there's a video to watch I can't watch it due to the message "ERROR: DECODE ERROR". How can I eliminate this & watch the video? Thanks for your input.

Have you tried to reinstall Flash on your system, uninstall from the control panel, then install from get.adobe.com/flashplayer/‎ and try the video again.
Also see [[Flash 11.3 doesn't load video in Firefox]]

Decoding error in parsing of spnego token

Dear Friends,
I was getting this error in the portal and it was not letting users into portal, the users got error message as authentication failed. I am pasting the log file for the error, Please help me find the solution to the error,
Note: Restarting the J2EE engine solved the issue, however I want to understand the root cause so that I can prevent the issue in future.
Decoding error in parsing of spnego token. [EXCEPTION] iaik.asn1.CodingException: Error reading ASN.1 datastructure: null
     at iaik.asn1.DerCoder.decode(Unknown Source)
     at com.sap.security.core.server.jaas.SPNegoLoginModule.doHandshake(SPNegoLoginModule.java:565)
     at com.sap.security.core.server.jaas.SPNegoLoginModule.doLogin(SPNegoLoginModule.java:378)
     at com.sap.security.core.server.jaas.SPNegoLoginModule.login(SPNegoLoginModule.java:303)
     at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:69)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.services.security.login.FastLoginContext.login(FastLoginContext.java:153)
     at com.sap.engine.system.SystemLoginModule.login(SystemLoginModule.java:90)
     at sun.reflect.GeneratedMethodAccessor225.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at javax.security.auth.login.LoginContext.invoke(LoginContext.java:675)
     at javax.security.auth.login.LoginContext.access$000(LoginContext.java:129)
     at javax.security.auth.login.LoginContext$4.run(LoginContext.java:610)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.login.LoginContext.invokeModule(LoginContext.java:607)
     at javax.security.auth.login.LoginContext.login(LoginContext.java:534)
     at com.sap.security.core.logon.imp.SAPJ2EEAuthenticator.getLoggedInUser(SAPJ2EEAuthenticator.java:86)
     at com.sapportals.portal.prt.service.authenticationservice.AuthenticationService.getLoggedInUser(AuthenticationService.java:305)
     at com.sapportals.portal.prt.connection.UMHandler.handleUM(UMHandler.java:96)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:186)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:368)
     at com.sap.portal.navigation.Gateway.service(Gateway.java:101)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks and Regards,
Deepak

Deepak, generally this error is displayed when the keytab file is generated with a ktpass tool with is not compatible to the JDK Kerberos implementation.If you have created the keytab file using different version ktpass tool, you have to recreate the keytab file using the required version. Please You verify the SAP Note 927350 - keytab generation for Kerberos authentication with SPNego.
Regards
Alejandro

AIP-51504: General Decode Error

Hi,
We are facing the below error while processing 997's for a partner. This error is inconsistent. 997 setup works sometimes and it doesn't at times.
Did any one else faced this situation?
Thanks,
Description: Unable to decode the message
StackTrace:
Error -: AIP-51504: General Decode Error: Error -: AIP-11015: Object does not exist 4C1D1D4ADAB8FCF6E040710A1F4C5E93-35-1
     at oracle.tip.adapter.b2b.msgproc.FunctionalAck.processIncomingMessage(FunctionalAck.java:669)
     at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1778)
     at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2030)
     at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1962)
     at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1920)
     at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:463)
     at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:335)
     at java.lang.Thread.run(Thread.java:534)
Caused by: Error -: AIP-11015: Object does not exist 4C1D1D4ADAB8FCF6E040710A1F4C5E93-35-1
     at oracle.tip.repos.core.driver.InternalObject.getAssociation(InternalObject.java:690)
     at oracle.tip.repos.core.persistency.BaseObject.getAssociation(BaseObject.java:388)
     at oracle.tip.model.b2b.instance.BusinessMessageReceiverInter.getReceiver(BusinessMessageReceiverInter.java:186)
     at oracle.tip.adapter.b2b.msgproc.AccessRepo.findRequestBusinessMessageByControlNumber(AccessRepo.java:665)
     at oracle.tip.adapter.b2b.msgproc.DbAccess.getRequestB2BMsgIdByControlNumber(DbAccess.java:3066)
     at oracle.tip.adapter.b2b.msgproc.FunctionalAck.processIncomingMessage(FunctionalAck.java:588)
     ... 7 more
Edited by: user4540631 on Oct 15, 2008 10:50 AM

Hi,
More information:
1) Only inbound FA's are failing (please note its random)
2) The number in AK102 matches to our outbound invoice's GS number, so i guess the correlation is fine.
3) I just reprocessed the FA after modifying AK102 number in FA to the ISA number of the invoice, with all preceding zero's and this works.
Example for my below outbound invoice, i have pasted below the FA that is failing and the modified FA which working.
Kindly advise
My Outbound Invoice
ISA*00* *00* *01*MY ID *01*MY PARTNER'S ID *081014*1012*U*00401*000001646*0*P*>'
GS*IN*MY ID*MY PARTNER'S ID*20081014*1012*1646*X*004010'
ST*810*1646'
BIG*20081016*123456*20081014*PO-NUMBER-A***DI'
CUR*SE*USD'
REF*VN*9001256'
N1*BT*TECH DATA CORP*93*TEMP000889-11350383-GP'
N3*5350 TECH DATA DRIVE'
N4*CLEARWATER*FL*33760*US'
N1*RE*REMIT TO.'
N3*REMIT TO.'
N4*PALATINE*IL*60055*US'
N1*ST*CSC SCORE DIVISION*93*4922495'
N3*PURCHASING DEPT, BLD#1479*NAS NORTH ISLAND,'
N4*SAN DIEGO*CA*92135*US'
DTM*011*20081016'
IT1*1*2*EA*151.2**VP*ABCDEF*BP*04989J'
PID*F****PRODUCT ABCDEF'
TDS*30240'
CAD*****UPS'
CTT*1'
SE*23*1646'
GE*1*1646'
IEA*1*000001646'
Modified FA, which is not failing
ISA*00* *00* *01*MY PARTNER'S ID *01*MY id *081015*1341*U*00401*200000541*0*P*|~
GS*FA*MY PARTNER'S ID*MY ID*20081015*1341*200000541*X*004010~
ST*997*0661~
AK1*IN*000001646~ -->Please note, modified AK102 with ISA13
AK9*A*1*1*1~
SE*4*0661~
GE*1*200000541~
IEA*1*200000541~
Original FA which is erroring out
ISA*00* *00* *01*MY PARTNER'S ID *01*MY ID *081015*1341*U*00401*200000541*0*P*|~
GS*FA*MY PARTNER'S ID*MY ID*20081015*1341*200000541*X*004010~
ST*997*0661~
AK1*IN*1646~ --> note AK102 is matching the invoice's GS number
AK9*A*1*1*1~
SE*4*0661~
GE*1*200000541~
IEA*1*200000541~

Problem with Adobe Decoder ST 7.5 - decoding error

Hi all,
I have an Adobe LiveCycle Barcoded Forms ST version 7.5 installed on
Windows XP. While trying to decode a barcoded pdf it logs the following
AdobeException: "Error in the PDF library."
The same pdf file is successfully decoded on Adobe LiveCycle Barcoded Forms ST version 7.0.
I've try to design the barcoded pdf with Adobe Designer 7.1 and 8.0 the decoding error is the same with Adobe Barcoded Forms 7.5.
I'll be very thankful for any kind of information about it.

Hi Lee,
I'm decoding a PDF that was filled, then saved without printing or scanning.
I create it with Adobe Designer 8.0, after that I'm adding it all rights (including 2D barcode decoding) with ReaderExtension 7.2. During the execution I have an error in the ReaderExtension console - "ERROR: document does not have certifying signature".
After that I'm filling and saving the extended pdf file with Adobe Reader 7.0.5, then I put the filled file in the input directory of the decoder and I receive the decoder error.
I'll send you the file.
Thank you very much.
Stanislava.
P.S. The ReaderExtensions and Barcoded Forms Decoder are both installed on Windows XP (one computer).

Decoder error on media center

I have media center for an hp computer: model # m7170N... it will no longer record or play television. The error message: decoder error- video has either malfunctioned or is not installed comes up. how can i fix this??

Your Microsoft Windows Xp SP3 version value in the registry may be inconsistent or missing ...
- Please navigate to the following tree in the registry editor and paste the value for "CSDVersion"
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion
The regkey can be accessed by searching for 'CSDVersion' in the registry editor or you could follow the steps below.
(1) Click 'Start' > choose 'Run'
(2) type 'regedit' in the run window and click 'ok'. This will open the registry editor
(3) Navigate the tree to 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion'
(4) look in the left side pane and locate 'CSDVersion' and its value.
And how did your upgrade to SP3 happen? Did it come preinstalled on your machine or have you upgraded it by downloading upgrades from the internet.
~S~

Ber Decoding error in embedded OCSPResponse

Hi,
I'm trying to sign Pdf using iText and I'd like to embed the OCSPResponse in the autheticated attributes of the SignerInfo.
When the document is validated online by Reader everything is ok. The offline certificate status verification is successfull using the embedded crl, but it fails to check the embedded OCSPResponse because of "a BER decoding error". I can't figure out what the error is....
You can download my PKCS7 files (one contains only the OCSP response, the other has both the OCSP and the crl) here:
http://www.adrive.com/public/e30000d3d7e4b097f7b7733cd35ddb6e3bb3b75c3 538942194461dd755a395ab.html
http://www.adrive.com/public/21971967c579fc0b065e5e05951fa486309be66ac 844427e367dbbb68a5183aa.html
Can anybody help me, please?
Thanks
Tania

Hi lizz4321,
A digital ID is made up of three components; a private key, a corresponding public key, and some identifying information. The keys themselves are pretty straight forward, they are just big blobs of numbers used to encrypt and decrypt data. It's the identifying information that gets a bit tricky. On first look, the identifying information looks like plain text. You'll see your name and the issuer's name, a serial number, some dates for when the validity starts and ends. All pretty straight forward.
However, all of this information is actually formatted using something called ASN.1 (it stands for Abstract Syntax Notation) and then encoded using BER (Basic Encoding Rules). When someone creates a digital ID they can put just about anything in there. Per specifications (RFC 5280 if you wanted to look it up) some items are required, and others are optional. Each piece of information that goes into the public-key certificate (the PKC is basically the digital ID without the private key) is contained in an extension. These extensions are identified using an OID (Object ID) and conform to a specification which may either be public or confidential.
There are two possibilities in the case you are seeing. Either, some of the information that Acrobat knows about was formatted or encoded incorrectly, or, there is an optional entry that Acrobat doesn't understand how to decode. My guess is it's the latter possibility. There is a rule that states if an extension is marked as critical, and the application using the public-key certificate (in this case the application would be Acrobat), doesn't understand the extension, then the application is supposed to reject the certificate. It could be the former case (badly formatted data), but without seeing the certificate all I can do is guess.
Steve

Decode error with japanese input

hi,
i have no problem displaying japanese text. but i have problem accepting japanese text from my jsp application.
i got the following error when i submit a form contains japanese text input:
Error: 500
Location: /proj/myProj.jsp
Internal Servlet Error:
java.lang.IllegalArgumentException: Decode error
     at org.apache.tomcat.util.RequestUtil.unUrlDecode(RequestUtil.java:353)
     at org.apache.tomcat.util.RequestUtil.processFormData(RequestUtil.java:233)
     at org.apache.tomcat.core.RequestImpl.handleParameters(RequestImpl.java:686)
     at org.apache.tomcat.core.RequestImpl.getParameterValues(RequestImpl.java:259)
     at org.apache.tomcat.core.RequestImpl.getParameter(RequestImpl.java:250)
     at org.apache.tomcat.facade.HttpServletRequestFacade.getParameter(HttpServletRequestFacade
pls advice me what could be the possible error.
thank u.

Did you ever have any luck with that? I am having a similiar problem - displaying the Euro sign (�). But it can display it no problem when displaying it from the Database.
Did anyone ever get a solution?
Any help is appreciated - thanks Liam.

YouTube videos dnt play decode error

I m using nokia Lumia 720, after windows 8.1cyan update, in YouTube every videos I m facing decode error problem. Plz reply me what is the solution for that.
Solved!
Go to Solution.

Congrats on your first post, manangowda. Have you already tried the solution given by hpholm? When you say "8.1 update", are you referring to the Lumia Cyan update? Does the issue happens to all the videos that you are trying to watch? Also, does it happen regardless of the connection you are using?
We'll wait for your response.

PDF decoding error then data exceeds 99 pages

Dear all,
i'm facing a PDF decoding error when as an atachment in a Email.
I figure that PDF attachment is opening when it HAS less the 100 pages but can not open
below is the error message when open ADOBE, this happens only when pages are more than 99.
"Adobe Reader could not open 'NAME.PDF' because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded) "
can anyone help me please.

For checking this
First download using fm GUI_DOWNLOAD as bin (PDF) download to you desktop and open it. if its working then you may need to check settings in SCOT.
a®

MXF decode error

Similar Messages

Maybe you are looking for